Working wi 5.1 Audio

I've asked a similar question previously, but let me be a little more specific about my project.
I am editing a concert thatis over two hours long. At present I am just using the audio from one of the four cameras it was shot with, that audio is a direct line from the soundboard and will be replaced.
I will be given a 2.0 stereo mix from a sound studio as well as a 5.1 mix of the same. I will have to sync and edit both soundtracks to match the video. I'm not as concend with the stereo mix, but for the 5.1, whats the bes work flow? Do i simply insert all 6 tracks and edit as normal...then compress for 5.1?
Any insight is appreciated.

You'll end up exporting different audio tracks for the final mix... one for each speaker.
There's a read on the procedure in the online manual located in the help menu.
Search on the word "Surround". and you'll see what Apple has to say about it.
Jerry

Similar Messages

  • Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well

    Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well

    If you use an HDMI cable, the audiostream will be integrated, so there will be sound when using an HDMI cable!
    Not necessarily.  That only works as stated if you have one of the most recent MBP's that has a built-in HDMI port.
    If the MBP only has a Thunderbolt or miniDisplayPort, you need an appropriate adapter cable and even if you use an HDMI adapter or cable to connect to your HDTV there is no guarantee it will carry audio.  You have to determine if your specific MBP model supports audio out through its miniDisplayPort or Thunderbolt output, and whether the adapter does likewise.

  • How do I get composite av cable to work on iPhone? Audio works, no video. Thank you for any help

    How do I get composite av cable to work on iPhone? Audio works, no video. Thank you for any help

    did you choose the correct input source ?
    I have to choose composite for my tv to show anything
    also the iphone 4 dont support mirror so it will only display
    picture when in supported apps like apples video app and youtube and the likes

  • Multicam source sequence - audio offset does not work when syncing via audio

    Working double sound with Canon 5D footage and syncing via audio is a big help, but the camera sound is one frame ahead of the video.
    Merge clips requires each v/a clip pair be selected individually AND can't be slipped after merging - so that's no good.
    Create multi-cam source sequence works a treat AND offers an audio offset BUT that does not appear to work when syncing via audio (I understand why you might think we wouldn't need it but...)
    Unlesss I'm missing something?

    I have the same problem. Syncing video via audio in multicam works perfectly on my 3 cam shoot but audio offset does not work. Had to do that on the sequence timeline afterwards.

  • Hi, I want to know if Logic Pro X running on Mavericks works ok with M-Audio Fast Track before buying it.

    Hi, I want to know if Logic Pro X running on Mavericks works ok with M-Audio Fast Track before buying it.

    Hi,
    Yes the Scarlett 2i2 will work with Logic Pro or  Reason, make sure you download the latest version of our driver (1.5 dmg for MAC) from focusrite.com downloads page.
    Hope this information helps.
    Best regards.

  • My IPOD 7th Generation is not compatible with my cars audio system. I had the IPOD nano 4th generation earlier and it was perfectly working on my car audio system. Is there any way i can make the IPOD Nano 7th generation compatible with my car audio syste

    My IPOD 7th Generation is not compatible with my cars audio system. I had the IPOD nano 4th generation earlier and it was perfectly working on my car audio system. Is there any way i can make the IPOD Nano 7th generation compatible with my car audio system?

    I am assuming you are using the Lightning to 30 pint adapter and it is not working?

  • Media Encoder CC hangs when working with 96/24 audio

    Title says it all! Has anyone else had this problem with Media Encoder CC? I just upgraded from CS5.5 to CC, and there were no issues with encoding 96/24 audio with CS5.5. I can reduce the audio files to 48/16 and theres no issue, but all the asset files for audio are in 96/24 and I'd of course rather work with the high resolution audio. I've tried searching the interwebz on the issue but can't find anything specific to the audio causing Encoder to hang. Thanks!

    Thomas Nord wrote:
    Update: We have discovered an issue where you can get this behavior if the source is a Premeire Pro sequence whose sample rate doesn't match that of the clips in that sequence. The solution is to match the sample rate of your sequence to that of your clips. Please let me know if this does not resolve your issue.
    Thanks,
    Tom
    I had some 96/16 audio from an H4n recorder. AME just sat there. Also had the same problem exporting directly from PPro without using AME. Just sat there, no error, just nothing.
    Changed the final sequence samples to 96kHz sampling and problem solved. That's a real bummer, since Adobe definitely pushes the sort of "edit anything" mantra a lot, and having to tailor sequence settings to a recently added audio clip is a step in the wrong direction. Glad to know it CAN be fixed, since these renders need to happen, but need that one patched up.

  • My iphone was stood on there there may be a fine crack in the mother board, i have very important voice recordings on the phone but although i can see them working there is no audio at all i cant link up to itunes  and i need to listen to the recordings

    Hi everyone, hope you can help.  My iphone was stood on and broken and i hadnt backed it up to itunes, i have had it repaired, it looks brand new but it has no audio at all, i have very important voice recordings that i need off the phone i can see them running but cant hear them, ive tried earphones but still nothing, the phone only works for a short period of time when plugged into the mains and has no internet connection now, is there any way ref software etc that i can get these messages off my phone, im desperate
    Thanks, Mellanni x

    If it will not connect to your computer, and it will not connect to the Internet, either via WiFi or cellular data, then there is no practical way to extract the information. There are no magic words that will fix the broken hardware.
    You could try a 3rd party data recovery service, but doing so will forfeit your right to a discounted out of warranty replacement. Only you can decide it it's worth that.

  • 10.2.1 error "iTunes has stopped working" Windows 7 with audio CD

    Hi! Hoping someone can help me with this one. Just upgraded to 10.2.1.
    iTunes opens ok but if I put in an audio CD, I get the windows error "iTunes has stopped working." It checks for help and then it states "A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." Then it closes.
    Any ideas?
    Thanks!

    Here it is:
    Microsoft Windows 7 x64 Home Premium Edition (Build 7600)
    Dell Inc. Inspiron 570
    iTunes 10.2.1.1
    QuickTime 7.6.9
    FairPlay 1.11.16
    Apple Application Support 1.5
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 3.4.0.25
    Apple Mobile Device Driver 1.52.0.0
    Bonjour 2.0.4.0 (214.3)
    Gracenote SDK 1.8.2.457
    Gracenote MusicID 1.8.2.89
    Gracenote Submit 1.8.2.123
    Gracenote DSP 1.8.2.34
    iTunes Serial Number 0028A5A8034DDBA8
    Current user is not an administrator.
    The current local date and time is 2011-04-07 20:35:42.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    ATI Technologies Inc., ATI Radeon HD 4200
    ** External Plug-ins Information **
    No external plug-ins installed.
    iPodService 10.2.1.1 (x64) is currently running.
    iTunesHelper 10.2.1.1 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    ** CD/DVD Drive Tests **
    LowerFilters: PxHlpa64 (2.0.0.0),
    UpperFilters: GEARAspiWDM (2.2.0.1),
    D: TSSTcorp DVD+-RW TS-H653H, Rev D400
    Audio CD in drive.
    Found 18 songs on CD, playing time 78:37 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 04:12:47
    Track 3, start time 07:55:58
    Track 4, start time 11:40:28
    Track 5, start time 15:29:22
    Track 6, start time 20:37:56
    Track 7, start time 25:54:27
    Track 8, start time 29:58:64
    Track 9, start time 35:45:17
    Track 10, start time 40:25:27
    Track 11, start time 46:05:25
    Track 12, start time 49:56:00
    Track 13, start time 53:45:22
    Track 14, start time 59:38:65
    Track 15, start time 63:30:13
    Track 16, start time 67:17:33
    Track 17, start time 71:04:38
    Track 18, start time 74:46:25
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 8 16 24 32 40 48.
    The drive CDRW speeds are: 8.
    The drive DVDR speeds are: 8.
    The drive DVDRW speeds are: 8.

  • Playback won't work using Mbox as audio device

    We were previously using Premiere Elements (we're on version 9.0.1) with a Digidesign 002 as the audio interface and everything worked fine.  We have since moved that computer to another workstation with an Mbox Pro, and are having issues whenever the audio hardware and output are set to use the Mbox.  Specifically, playback will run for about 15 milliseconds, and then stops.  If we set Premiere to use the built-in line out, everything works fine.
    I have updated the Mbox drivers with no effect.  My hunch is that this also has something to do with having upgraded from Pro Tools 8 to 10, which doesn't seem to use Core Audio the same way, but any help would be greatly appreciated!

    Welcome to the forum.
    When Audio hardware is not working with an Adobe program, I first look at the ASIO settings. I suspect that you have already checked that out carefully.
    Next step, when all setting ARE correct, and I still have issues, I install a free ASIO driver, ASIO4All, and set the Adobe program to use that. It has cleared up all sorts of issues with Adobe programs, with low-end consumer cards to some esoteric pro gear. It's probably the most often recommended "fix" on the Adobe Audition Forum.
    Good luck,
    Hunt

  • Working with Multi Channel Audio

    i've recently been getting into backing videos for live band performances, and have been trying to work out how to assign audio tracks to multichannel outputs, specifically i want to have a stereo music track with a mono (or stereo) click track. Any ideas??

    i've recently been getting into backing videos for live band performances, and have been trying to work out how to assign audio tracks to multichannel outputs, specifically i want to have a stereo music track with a mono (or stereo) click track. Any ideas?Not exactly sure what you are looking for here. Multichannel outputs are normally assigned as part of the A/V creation/conversion process. However, individual/combined audio track/streams can be reassigned using the "Properties > Audio Settings" option in QT Pro. If you are referring to the switching of multiple audio tracks (mono, stereo, 5.1, etc), this capability can be programmed using the "Properties > Other Settings" option for the various associated audio and/or video tracks involved. Switching is accomplished using the QT Player "Choose Language..." View menu option during/before playback. (Note: iTunes and iPod players do not include an option for switching to alternate tracks and players like VLC use arbitrary track identifications while the QT Player uses "Languages" for reference.)

  • Button on video track via subtitles work but not for audio via story

    Hello,
    I have a video track with two different audio (two versions of music). I have created two buttons within a subtitle to have them directly on the video
    if i make a link to the menu, the button work correctly. But in fact i make a link to two different stories, each with the different audio track
    this way it does not work ..
    any idea ?
    DVSP3

    Hey Thierry Arnould,
    You could use scripts.
    Create 2 scripts each with the function "Set System Stream"
    and select the "audio streams" which you want to use.
    Then add as Startscript to the corresponding story.
    hope that helps
    G5   Mac OS X (10.4.7)  

  • Premiere Pro to Adobe Audition Dynamic link does not work. Cannot edit audio in Audition.

    Trying to edit Audio from Premiere Pro within Audition thru the Dynamic link but it does not fire up Audition to edit. Seems like a common problem/bug. But no one has posted a solution. Please Help
    -Windows 7
    -Premiere Pro CC 2014
    -Adobe Audition CC 2014

    You dont understand it was all working fine in the previous Adobe versions. matter of fact you can go on youtube and see a couple of videos that shows the work flow between Premiere Pro and audition by way of Dynamic link. If you edit a video clip in Premier Pro and want to add some music or simply edit the audio that is contained in the video there was a time within Premiere Pro you can just right click "Edit in Adobe Audition" and Audition would open with the audio clip in place. Much in the same way Premiere Pro works with After Effects thru the Dynamic Link. The Dynamic Link is the bridge between applications to work with each other. For some reason Premiere Pro and Audition Dynamic Link is not working properly.

  • Preview Files Suddenly Go Missing, Render Entire Work Area Crashes Premiere, Audio Drops Out

    I opened a Premiere Pro project I was working on earlier today and it said it couldn't find the preview files, searching my system found that the files didn't exist.
    Rendering my entire work area brings up the "render window" but nothing happens, if I press cancel Premiere freezes.
    Started getting a strange situation error ( 26 ::139 ) in After Effects at the same time that Premiere lost the preview files and the crashes started happening. It disallows me from editing any dynamically linked projects. In Premiere the DL's just show up as "Media Pending" clips indefinitely. Importing the compositions in AE into a new project didn't fix the issue either.
    The three problems above started happening all at the same time, was working through a color grade using Red Giant software when it started happening.
    Also audio drops out on playback randomly in Premiere Pro, tried various audio drivers and hardware, none entirely eliminate this problem. Sometimes the audio will cut out and "burst in" distorted very loudly, which is disturbing, even when my work area is rendered. This problem has been around since I started using PP CC.
    I can provide more info soon or if people want more info pls let me know, I'm very tired and I need to get this issue resolved for tomorrow, in the mean time hopefully someone can point out a general fix for these errors or knows a few workarounds. Tried reinstalling PP and AE, no luck.
    Computer is a Windows 7, 64-bit. i7 950, 12gb RAM, GeForce GTX 650, programs installed on a separate internal HDD, media files on another internal HDD. But these same issues (minus the audio dropouts) was also cropping up on a core 2 duo 13'' macbook pro.
    Regards,
    Zach

    Hi Arjun, thank you for your help.
    Though that didn't work either. At least the timeline will playback but as soon as I try to render my work region or export any video Premiere freezes.
    I removed all dynamic linked files as well, that didn't seem to change anything.
    Something I noticed -- the render bar on the timeline that is usually yellow for edited clips that have no FX on them is all red, nothing is yellow (or green). This is a 4 minute long edit on a music video, nothing extraordinary.
    I tried creating a new project and dragging a few clips in and editing them, everything went normally and I could render and export the clips. Just any rendering done on any version of this music video edit I'm working on crashes the program.
    Also recently had a problem where I opened the music video project and the song that I imported (.mp3) all of a sudden has no waveform or sound coming from it. Dragging it back into the project doesn't fix it either. Workaround was using a .wav copy of the song. 
    Zach

  • Better work flow for final audio mix

    Hi everyone,
    I just finished a 20min documentary shot on miniDV. I did the offline cut on my Powerbook G4 then took it to a post house for online and recording the narration and final mix.
    They exported my project to Pro Tools for the audio work. Evidently, when exporting to PT, all my level settings and audio transitions are lost, and we had to re-mix everything from scratch.
    Is this the typical work flow? This is my first paid gig as director/editor, so I'm new at this. But it seems quite ineffiecient.
    Is there a way to export my audio with all my audio settings intact? or at least the level settings. That way, the mixing engineer can fine-tune my rough mix rather than re-mixing from scratch. I'm wondering because I'm cutting another 20min piece where the audio mix, as rough as it is, is quite intricate, and I'd hate to have to re-do it all in PT.
    I suppose one way around this is to work with Soundtrack Pro. But I'm living in Vietnam, and the post houses/recording studios all use Pro Tools.
    Thanks.

    When we send out audio for sweetening we export the show as an OMF 2 file. This allows the PT folks to start with your exising clips and settings and then change them accordingly.
    From FCP you select your sequence and goto file>export>Audio to OMF. We usally give them a version with transitions and one without selectable on the export window. Once the OMF file is created you then image to a disk and hand it over. In return, they will give you bavk an OMF file which you reimport into your show and sync with your show. If your show starts at the 01 hour mark, start the show with one frame of bars and tone. Then have your show start two seconds later. This will make it easy for you to match back up. Also, you should give them a QT of the show with the same one frame of bars and tone for a visual reference for them.
    Hope that helps.
    Mac G5 Dual 2.0   Mac OS X (10.4.3)   Kona 2 HD SDI

  • Working with Video and Audio...Please help (i am not a coder!)

    Hey all. I am currently working on a project in Flash (CS3
    action 2.0)
    It is an animation and it includes a layer mask of a TV
    screen, which shows a precut quicktime movie on the screen.
    I am working with multiple scenes (11 to be exact) they are
    all my different cut points.
    The animation consists of 1st scene- VO (voice over) and BG
    SFX. When I hit Apple+Enter this part plays sync'd up correctly.
    However as the scenes progress on the sound gets out of whack.
    Scene 2 consists of the quicktime movie (Video and Audio)
    mask playing on the screen. All sound heard is a part of the .mov.
    For this one the timing is also good.
    Here is where it gets fluky. The next scene consists of a VO
    and BG SFX. (and only those things) However, at this point of the
    movie i hear the sound of the next .mov i have embedded in the file
    (from scene 3). This is all happening well before that scene even
    shows up in the preview.
    I hope i explained it as clearly as possible. Anyone have any
    ideas?! I would greatly appreciate it!
    btw- i have set the frame rate to 29fps to match that of the
    quicktime movies that are embedded.

    Hi Brian, I don't mean to nit-pick but this is an
    actionscript 3 forum, so you'd probably have better luck with the
    general forum for non-AS3 questions.
    There could be a couple of things that are causing a problem,
    its hard to say without actually having your project on hand.
    It almost sounds like your movie is taking longer to load, if
    thats the case you could simply start the audio a little later in
    the time line to sync it up.
    I know you don't want coding solutions but you can probably
    have flash "wait" for the movie to begin playing, and have that act
    as the starting point for the audio.

Maybe you are looking for