Working with 2 screens in Brigde CC

Please does anyone know who to work with 2 screens in Bridge CC

You cannot put panels on a second monitor if that's what you mean. You can however toggle them on/off with the Tab key.

Similar Messages

Captivate 8 content not working with screen readers

My Adobe Captivate 8 published content is not working with any of the screen readers I have tested: JAWS, Mac Voice Over, and Windows Narrator. It is a simple launch page with 6 buttons used to launch additional CBTs.
I have been over and over the content in the help topic for this and cannot find any reason to think I am not doing this right:
[ ] https://helpx.adobe.com/captivate/using/creating-accessible-projects.html
I have added accessibility text for the slide, I have tried adding the accessibility text for the buttons, have turned on accessibility in my publish settings, I have even tried just adding a text caption sitting on the slide with the text I want read by the screenreader - none of it works.
I have searched the forums and it appears others have this issue as well. The latest forum post was having to do with Captivate 7 - where the poster followed up stating Adobe Support recognized this as a "bug". Does screen reader accessibility work in Captivate 8 or not?
Is there anyone out there who has produced content that works with a screen reader?! If so, please tell me what the secret is!!

I've been able to get a screen reader to read parts of a Captivate 8 presentation using the HTML5 output (but NOT the .swf output). I tested using NVDA.
However - they keyboard accessibility does not seem to be functioning correctly. I can tab through buttons and such - but hitting enter on any of the buttons (play, forward, backward, closed captions, audio) does not work.
Overall - doesn't seem that Captivate 8 is as "accessible" as Adobe is claiming. Much of what they claim should work - does not.
CP8 is certainly no where near WCAG 2.0 "AA" standards (which unfortunately is where i need things to be).

Iphoto not working with screen saver

Ever since I upgrade to 10.6.2, my screen saver will not allow me to use pictures in iphoto. When I click on a folder to use, it gives me a message "unable to use iphoto please contact vendor for screen saver upgrade" or very close to that. HUH? Isn't apple my vendor for both? Any ideas on how to go back to using my photos as my screen saver?

My guess is that ILMediaBrowser is referring to the iLife Media Browser. You might run Software Update and see if you somehow missed an update to it. However, if it worked with a new iPhoto Library I think the iLife Media Browser is probably OK, but there is something funky in the innards of your original iPhoto Library that is crashing the Media Browser.
You could try holding the Command and Option keys down, then launch iPhoto from the Applications folder. Keep holding the keys until it asks you if you want to rebuild. There are list of items to be checked, click on the ones that sound likely to help matters.
Francine
Francine
Schwieder

Does Digital editions work with screen readers

Yesterday I discovered that the books I can read online provided by my library have changed to acsm files instead of protected pdf files. I have installed digital Editions, but it seems that it does not work with my screen reader. When I open the digital editions application there are no controls at all. When I open a acsm file it opens digital editions and nothing happens! I am using JAWS for Windows as my screen reader. Is Digital Editions at all accessable for screen reader users?? There is nothing about Digital Editions on the Adobe accessability pages not a good sign for blind users!

No. For information about the future plans for this see http://blogs.adobe.com/billmccoy/2009/10/adobe-ebooks--.html

Working with screens in flash 8

i need help regarding to working with slide presentation in
flash.i have searched a lot in the web but i couldnt find my answer
my problem is i want to creat a slide presentation which goes
automaticaly to the end of slide without using navigation buttons.
i m using flash 8.

Flash 8 comes with photo slideshow templates, do you have
that?

Aperture No Longer Working With Screen Saver?

For years I've been using my Aperture library (specifically, the "Flagged Photos") with the Screen Saver in OS X. Since I upgraded to Lion last night, I have discovered that my Aperture library no longer shows up as an option in Screen Saver -- only iPhoto does.
As I am remiss to ditch years of work and return to iPhoto -- I was hoping someone might have discovered a solution for this problem (perhaps something to do with the iLife browser in Lion?).
Any help would be greatly appreciated.

Kluv32 wrote:
Then, I checked the new sharing preferences and closed out Aperture. I opened up the System Preferences for Screen Saver, and after waiting about 1-2 minutes, Aperture popped up in there as an option.
Can you please explain what you mean about "checked the new sharing preferences?" I see no way of setting any "sharing" preferences in Preferences or anywhere else in Aperture. Do you mean you just looked at the sharing preferences?
Since I've upgraded to the latest version, when I go to the System Preferences, Aperture is very slow in showing up on the ScreenSaver settings under System Preferences and the virtual Library folders no longer show up (they show up under the Desktop window though). However, after closing Aperture, the screensaver would display "looking for pictures" and would not display the photos.
The latest upgrade definitely broke something, although it greatly improved Aperture's response time, as it was getting pretty sluggish before the upgrade.

Using avi files with DVpal. Working with screen grab footage.

Hi.
I am currently editing some short little promo's that mix DVpal footage with .avi footage. The .avi footage are screen grabs of someone navigating a website, and are designed as cutaways to illustrate a ptc.
However when they are rendered out on the timeline, the text from the website that is in the screen grab video becomes too distorted/(rasterized i think), essentially unreadable. I was planning on some degradation, but didn't realize it would destroy the image so much.
I have tried exporting/converting the .avi files to certain .mov formats but all with essentially the same problem.
Does anybody know a work around solution to help solve this problem. Or is the best way to redo the screen grabs as .movs with the relevant settings, and can anyone recommend some software for this job.

I think the problem is more based in the fact that you're working in DV. Can you work in a higher quality format?

Captivate 7 preloader not working - with screen captures for clarity

Hi Community,
so I'm working in the Captivate 7 trial version, because the preloader for Captivate 6 isn't working for me. We have a ~48MB project with mp3's on almost every slide, flash videos, flash animations, quizzes and plenty of jpegs.
Before we publish the project we make sure we click everything that's needed, but because it's still not working I took screen shots of all the settings. Maybe I'm missing something, I would appreciate your help.
Thank you guys so much!!
Nat

I'm assuming here that your preloader animation is at least appearing when you are loading the file so that you KNOW it IS working.
Try setting your preloader progressively higher until you find the percentage at which the load times start INCREASING again. If you have a lot of videos in your project, setting the preloader at a very low value like 10% doesn't necessarily affect the load times that much because Captivate still has to load a certain amount of the total number of assets before it can start to play anyway. It could be that you have a whopping great event video right near the start of the project and that's what is causing the lengthy delay.
If your issue is still with the preloaders NOT appearing at all, then the only settings that would affect this are the ones on the Preferences > Project > Start and End > Preloader path and percentage. The path looks to be fine, but if preloader animations are not visible at all, try changing to a different preloader. Maybe only SOME of them work. The Default.swf preloader is usually reliable.

No audio with video chat, but it works with screen sharing...

I've got a friend who just upgraded to snow leopard. We're both using iMacs. My computer is working find, and I have audio and video with other people.
When we video chat, there is no audio. When I screen share with her computer, with her seeing my desktop or me seeing her desktop, the audio works.
No mute buttons are down, I've checked system preferences (sound) everything is right.
Any ideas?

HAs she checked that System Preferences > Sound > Input is listing and has her Mic Selected ?
Is he r Volume high enough in the same place ?
In her Video Menu is the "Microphone " Enabled" ticked ?
In iChat Menu > Preferences > Video Section is the same Mic listed ?
Do the response bars move under the Preview when she talks ?
During a Chat in Your Connection Doctor (Video Menu) is she sending any Audio ?
IS she showing as having a log more Bit Rate than you ?
9:41 PM Wednesday; September 23, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Should it work with screen removed and monitor connected?

My screen died, the machine is ageing so I thought -just remove the screen and plug in a monitor I know works - and use as a desktop. Removing the screen was OK - but the machine will now not switch on. Have I done something silly or does the screen need to be wired in - there are quite a few wires to it i.e does the Mac need to detect the presence of it's LCD screen?

Well I have gone back through several times - apart from disconnecting the screen (two sets of wires and two antennas) I had to disconnect one strip to release the antenna cable and of course the keyboard connector. Not a lot really and I don't seem to have disturbed anything else. Sooo looks as if it goes to the great scrapyard! Like my new machine though!!!!!!!! But thanks for taking the time to respond.

Working with Screen Capture Footage in FCP

I purchased Snapz Pro X to record screen capture footage for a project I am doing. After recording the .mov files I imported them into FCP and edited together a sequence along with music and titling. Unfortunately in the output video the footage looks compressed and fuzzy. I have the project resolution set to an HD setting, but I'm still getting a fuzzy looking screen shot.
What is the proper way to import screen captures into FCP and how do I export them without loosing resolution.
Thank you ahead of time to everyone who has any input?

Hi -
When you saved your SnapZ Pro X movies, a window comes up allowing you to choose the video codec to use when saving the file. What settings did you use?
Also, have you rendered the timeline?
Thanks

Is it possible working with screen without UDO and No object

Hi All ,
we can develop screens without using User Defined Object and No object
If yes ,tell me how
Thanks in Advance
Vivek

Hello,
Yes, you can develop forms without UDT and Object.
It is not easy, you should program every standard procedure like, find, add, update, delete, navigation (first, last, next previous).
In some previous versions, while the UDO was not present i was using this...
For UDT you can use databrowser, and you can bind data to the UDT tables.....
Good luck.
János

Tour de Flex Sample - Working with Screens - 12500

comments

The sample tester is broken. We're going to have it fixed in the next couple of weeks (right after Adobe MAX).
If you want to see what your sample will look like, you can always hand-edit the XML file. Look for the file objects-desktop2.xml. That is the catalog of samples. You can put your own URLs into that file and test.
NOTE: the objects-desktop2.xml file is replaced very time we publish a new sample, so your changes will be overwritten at any time.
If you accidently break the file, simply delete it and re-run Tour de Flex.
We'll have a new sample tester shortly. If you have samples to contribute, please contact me at gwilson (at) adobe com.
Thanks!
Greg

Best stylus for ipad air with screen protector?

Hi... I reaaly want to buy a stylus for my ipad air... I was thinking about Wacom Bamboo or Adonit Jot Pro... But, apparently, the first one doesn't work in ipad air and the second doesn't work with screen protector...
Is those true?
Please, help me...

I use the Jot Pro with a tempered glass screen protector and it works flawlessly.

Full screen auto-hide feature does not work with Adobe Acrobat Reader add-on 11.0.0.379 in Firefox 17.01.

"Full screen" menu item and its keyboard short cut F11 stop working with Acrobat Reader. The Firefox top edge border does not hide once you have moved around in the Acrobat document. Therefore it is not possible to display PDF documents in a true full screen mode within Firefox. The auto-hide full screen mode works nicely with other Firefox windows, so apparently the Acrobat Reader add-on breaks the feature. Windows 7 64-bit.

From the JS API Reference of the print method:
Non-interactive printing can only be executed during batch, console, and menu
events.
Outside of batch, console, and menu events, the values of bUI and of interactive are ignored
and a print dialog box will always be presented.

Working with 2 screens in Brigde CC

Similar Messages

Maybe you are looking for