Working with a Windows NT 4.0 server

I am testing OS 10.4.8 in a production situation. The problem I am having is I copy a folder or files from one Mini Mac to a Windows NT 4.0 server and go to another Mini Mac and open up the server and I don't see the folders or files that I have just copied out there. I have to disconnect and reconnect to the server and then I see the folders or files. Is there a problem with OS X or am I missing something in OS X. HELP HELP

I think that's a problem with the Finder, and much worse in 10.4 than previous releases. Even Locally saved files may not show up until they want to! Even when you know exactly where they are.
There's a 3rd party utility that fixes this, or at least forces an update, but I can't remember what it's called!
I don't think this is the one I was thinking about, but this should work...
http://www.versiontracker.com/dyn/moreinfo/macosx/18736

Similar Messages

My ipod nano is no longer recognized by itunes after I installed windows 8.1. The ipod nano still is recognized and works with a Windows 7 computer

My ipod nano is no longer recognized by itunes after I installed windows 8.1. The ipod nano still is recognized and works with a Windows 7 computer

Hello, Pete.
Here is an article I would recommend going through when an iPod is not recognized by iTunes or the computer.
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Usually the resolution is updating the Apple Mobile Device Driver. See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H.

My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help

My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help

My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help

HT3669 Hi I have a Konica Minolta PagePro 1300W printer. This works with my Windows-based Toshiba laptop but not with my i-Mac. Can someone please advise me how I get the printer to work with my i-Mac? I have installed it but documents don't print. Thanks

Hi I have a Konica Minolta PagePro 1300W printer. This works with my Windows-based Toshiba laptop but not with my i-Mac. I have the latest (Mountain Lion 10.8.2) OS-X software.
I have installed the printer using 'System Preferences' on my i-Mac and it appears on the list of available printers but documents that I create just don't print.
Can someone please advise me how I get the Konica Minolta PagePro 1300W printer to work with my i-Mac?
Thanks, John Lee

Looking at the Konica web site for the PagePro 1300W, I saw the following note.
Please note: This printer is designed to be used in computer operating systems running MS Windows only. Operating systems such as UNIX, Macintosh, or Linux are not supported nor do we have workaround drivers available. Older MS Windows versions, such as Windows 3.1/95/98[pre-SE] and NT 3.51/4.0, are not supported.
So KM are not going to help you. But the LinuxFoundation does provide a workaround that should allow you to print. Have a look at this web page. You will need to install all three packages as per the instructions from that page.

ITunes tells me, that I need to load version 11.1 in order to load a backup into my iPhone 5. I'm working with a windows PC and want to update my phone to iOS 7GM. version 11.0.5 is the highest I can get for windows. Can somebody help me?

iTunes tells me, that I need to load version 11.1 in order to load a backup into my iPhone 5. I'm working with a windows PC and want to update my phone to iOS 7GM. version 11.0.5 is the highest I can get for windows. Can somebody help me?

I'm assuming you followed a forum like Gizmodo to load the latest version of iOS 7 Beta on your device
Alot of those forums forget to mention, iTunes 11.0.5 will allow you to update to the iOS 7 Beta but your device will no longer work unless you have the developer version of iTunes as well....
I'd suggest you to research how to downgrade back to 6.1.3/4 and wait a few days for the iOS to be released,

I have Lightroom4 for an iMac. Will it work with a Windows based laptop?

I have Lightroom4 for an iMac. Will it work with a Windows based laptop?

You need to install the Windows version. The serial number for the Mac version should work with the Windows version.
Lightroom - all versions
Windows
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
Mac
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

Which motherboard is the best for p4 and works with all windows fro

dear all
iam looking for a good motherboard for p4 processor but i have used gigabyte but with windows 98 it keeps freezing the system
so could some body give me an advise to a better motherboard to work with all windows (98 to xp)
thank you

Hi sha6sho6,
I dun really know if it will have mini errors with 98 as I didn't install any 98 on my system, but this board works perfectly fine with my 2000. 2000 is a more complex platform than 98 as it supports more than Windows with NT in it.
If it works well with my 2000 platform, then I think 98 shouldn't be a prob .
All the Best... :D!!!

Reg:working with multiple windows in webdynpro-abap

Hi ,
How can we create multiple windows and how can we link them...
suppose we have 3 fields on first screen .how to move the data from the first screen to second screen..
Thanks & Regards
Suman Puthadi

Hi
As per your Subject you are looking for "working with multiple windows in webdynpro-abap" and for abap there is a different forum. Web Dynpro ABAP
Hope its clear to you...
Even you can read this post when ever you get time Read before posting
Regards
Ayyapparaj

My ipod shuffle 4gen won't work with my windows 7 computer

Hi
I have a brand new ipod shuffle 4gen, it sincronizes music with my netbook but it doesn't work with my windows 7 computer. An apple assistant helped me to uninstall itunes completely and it worked for a day. Now it doesn't work again, can you help me please?
thnks

Alos try here:
iOS: Device not recognized in iTunes for Windows
Do not forget this.
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Windows key + left and right arrows not working with RemoteApp windows

My office is deploying RemoteApps to replace certain locally installed applications. I, and many of my coworkers, have 2-3 monitors and the Windows
+ left and right "snap" function has been an extremely convenient way to juggle multiple windows across multiple monitors. Unfortunately, it doesn't seem to work with RemoteApp windows. Does anyone know a way to get this working?

Hi,
Based on my test, I agree with Keith Langmead, it seems Windows key + left or right key cannot work with remoteapp.
Alex Zhao
TechNet Community Support

Re: Would serial number at the bottom work with other Windows Vista OS

Firstly sorry for my English.
I have only one question.
My hard drive is broken with my recovery partition.
If I download windows vista and install the system with my original serial number on the laptop, this will be working or I need to activate him after installation.
I hope this is the same number than before is installed on my first installation.

Hi Marcin
I doubt that the serial number which is placed at the bottom of the unit would work with another Windows Vista OS. But its worth a try
You could test it I heard that is very rare cases this was possible
Anyway, if your HDD is broken and its not possible to create a recovery DVD using the software Toshiba Recovery disk creator then you should contact the ASP in your country for a help.
If the warranty is valid the HDD should be replaced just for free. If you need only the Recovery DVD then you could order it here:
https://backupmedia.toshiba.eu/landing.aspx
Regards

Anyone have a driver for the ImageClass D860 that works with a Windows 8 64 bit computer?

Please help. If anyone has or knows of a driver for the ImageClass D860 that works with a Windows 8 64 bit computer, please send it or the link to me at [MOD removed email address per FORUM GUIDELINES]. Thx.

I am trying to do a wedding and now spending too much time searching the web for tutorials and reviews to try to figure out what is going on. There needs to be better detailed help.

Does Airport Express work with a Windows Computer?

Does Airport Express work with a Windows Computer?
I'm trying to setup an older Airport Express to play iTunes
with a Windows Computer. I just want it to join my network,
since I'm already connected to another router.
Thanks,
Paul

Is there a Windows version of the Airport Utility (I think that's what it's called)...
Yes. That is only needed to configure the AirPort Express (AX).
...or do I have to go through Windows setup software?
You may have to do that to get Windows to join the wireless network.

Anyone got NTP working with a Windows 2008 NTP server?

Hello,
I'm trying to sync the time on our routers and swithces with a Windows 2008R2 server, but it doesn't work. Has anyone managed to do this:
Config:
ntp master
ntp update-calendar
ntp server 192.168.2.164
sh ntp associations
address         ref clock         st   when   poll   reach    delay    offset     disp
*~127.127.1.1     .LOCL.         7     11     16      377      0.000   0.000      0.225
~192.168.2.164 .INIT.          16      -      1024     0       0.000    0.000    15937.
Windows 2008R2 server
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\TimeProviders\NtpServer]"
"Enabled"=dword:00000001
restart server
w32tm /config /manualpeerlist:uk.pool.ntp.org,0x8 /syncfromflags:MANUAL
net stop w32time
net start w32time
Doesnt work
Woudl Linux like Ubuntu be better?
Thanks

I got this working from a cisco 2911 router to Windows 7 computer.
As per many articles, you are missing:-
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Config]"
"AnnounceFlags"=dword:00000005
But the one that allows Cisco kit to Sync is:-
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Config]"
"LocalClockDispersion"=dword:00000000
This article http://www.cisco.com/c/en/us/support/docs/ip/network-time-protocol-ntp/108076-ntp-troubleshoot.html talks about having a root-dispersion higher than 1000ms (1 second) causing Cisco IOS-NTP to unsynchronizes itself.
This article http://htluo.blogspot.co.uk/2009/02/ntp-network-time-protocol.html#comment-form was the only one I found that added to the normal enable ntp server registry keys information, stating to change ‘HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\W32Time\Config\LocalClockDispersion’ from 10 to 0
There was also articles that said that the Windows NTP implementation was version 3, and therefore you had to append ‘version 3’ to the routers ‘ntp server x.x.x.x’ command. This may be perhaps true for earlier windows versions?, but was NOT required for Windows 7.

Windows 8.1 Enterprise DirectAccess with a Windows 2008 R2 DA server

I don't suppose anyone out there is using Windows 8.1 Enterprise with a Windows 2008 R2 DirectAccess setup?
We have an existing 2008 R2 DA setup used by 50+ Windows 7 Enterprise laptops without any issues.
We're testing Windows 8.1 Enterprise and the DirectAccess functionality seems to be very intermittent, you can't use any of the Windows 8.1 powershell commands to look at the status as it's not using the new 2012 functionality but DA is there and works.
The problem is it seems to take a long time to connect, anything from 15 minutes to several hours and in some instances seems to fail to connect entirely. I can't see anything in the event logs and I'm really struggling to work out why it's so intermittent.
Cheers
Robert Grigsby

Hi,
DirectAccess performance is dependent on many factors such as the speed of the DirectAccess client’s connection to the Internet, Internet latency and congestion between the
DirectAccess client and server, and the current load on the DirectAccess server. Another reason might be the type of Internet Protocol version 6 (IPv6) encapsulation being used over the Internet Protocol version 4 (IPv4) Internet. 6to4 and Teredo tend to have
higher performance because the encapsulation is simpler to process. Internet Protocol over Secure Hypertext Transfer Protocol (IP-HTTPS) tends to have lower performance because of the higher protocol overhead and the additional Secure Hypertext Transfer Protocol
(HTTPS)-based encryption and decryption.
When examining performance issues, one of the first places to look is the display of the
ipconfig command on the DirectAccess server, which indicates the type of encapsulation based on the interface that has a global IPv6 address assigned.
The related KB:
DirectAccess Client Connection is Slow
http://technet.microsoft.com/en-us/library/ee844161(v=ws.10).aspx
Regards.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Working with a Windows NT 4.0 server

Similar Messages

Maybe you are looking for