Working with admob in flash pro or CC for android mobile ads

Hi
I want a sample flash file for "admob" to work in android mobile to show me sample banner ads?
i'm searching on the web but i didn't found anything!!
or how i can do this??
Thanks,

lilili87222/Admob-ANE · GitHub
admob demo of flash cc.

Similar Messages

  • Flash Pro CC AIR for Android Publish Never Finishes

    I am having so much trouble with the new CC flash pro. Simply, it does not publish to devices - at all.
    I was able to get the proper driver so that Flash Pro recognises my device (which was a challenge in itself). Now, when I go to publish it never finishes. Apparently they removed the timer from the publish window - a bad choice IMO because now I'm going to be waiting hours for it to finish when it actually has frozen.
    On android, the "Publishing..." box comes up and never goes away. There are no errors. It just simply does not work when I push the publish button, any of them. I have no idea what the problem could be or how I am supposed to fix this so any help is greatly appreciated. thanks.

    I'm having the same problem with Flash CC on Mac OS 10.8.5 using AIR 3.6 and 3.9 beta sdks publishing to Android.
    Essentially Flash CC builds the apk just fine then hangs at 00:05 when it should be installing the apk to the device.
    In looking at Activity Monitor I noticed I had two adb processes launched which could be part of the problem.
    I then tried publishing through Flash CC but installing on devices via the command line when I've now run into another error:
    $ adb install Untitled-1.apk
    1311 KB/s (9427446 bytes in 7.021s)
              pkg: /data/local/tmp/Untitled-1.apk
    Failure [INSTALL_PARSE_FAILED_NO_CERTIFICATES]
    Apparently the apk isn't signed despite including my certificate in the publishing settings (along with the password) and the publishing process finishing without error.
    An unsigned APK will not install on devices, which *could* be related to the problem of Flash CC never finishing publishing when 'install on device(s)' is selected in the publishing options. If Flash CC is waiting for a 'success' event to be fired from adb it may simply never be receiving one and therefore never finishing the publishing process… (just speculating).
    Also, this is happening with *ANY* FLA I try to publish to Android.

  • Will Compressor 4 work with my Final Cut Pro 7 in Final Cut Studio?

    I decide to use Final Cut Pro 7 instead of Final Cut Pro X to use the Apple Color. But I wonder if the Final Cut Pro 7 can render video or work with Compressor 4 instead of the Compressor 3. Any ideas of what to do?
    Thank you for the answer.
    Steve

    This recently came up in another thread. on FCP6.
    I'd say pretty much the same applies to FCP7  as FCP 6 – except that the features for C3.5 are even more comparable to C4 than are C3.0. No interoperability between the new Compressor and the legacy versions of FCP, but many of us have always just exported QT movies fron FCP and used those as source fies. That can obviously still be done "working with" C4.
    Is it worth the $49 for those who own FCS3? IMO, it's doubtful unless you do a lot of Web hosting work.
    Good luck.
    Russ

  • Will my LED 27 Cinema Display work with the new Mac Pro?

    Will my LED 27 Cinema Display work with the new Mac Pro?

    Mini DisplayPort (like 27" LED Cinema Display) is a direct subset of ThunderBolt (like Mac pro late 2013). It plugs right in and the display portion "just works", no adapters required.

  • Will it work with the 2010 MacBook Pro?

    Can anyone tell me if the Apple DVI to ADC Adaptor will work with the 2010 MacBook Pro with DisplayPort using Apple's "Mini DisplayPort to DVI Adapter"?
    Cheers,
    Mitch

    I'd suggest checking out the drives at OWC:
    http://eshop.macsales.com/shop/internal_storage/hard_drives_and_SSD
    They speak Mac and have excellent customer service.

  • Will the new final cut pro x work with my Final cut pro version 6.0.6 data

    will the new final cut pro x work with my Final cut pro version 6.0.6 data

    Thanks Tom.
    So I will need  upgrade to FCP 7 first, then convert to an XML file in 6.0.6, then convert to another file that FCP X can read? I have a lot of half done projects that need finishing. Is this process very complex and time consuming?
    Maybe I should be approaching this from a different angle. The reason I am asking is that I now need to upgrade to a new Mac book pro and have been told that I cant run final cut pro 6.0.6 on the new models using maverick. Is this true?
    Roger

  • Incredibly Long Lag Time When Working With Effects in Premiere Pro CC 2014

    I am having incredibly long lag times when working with effects in Premier Pro CC 2014.  Like 60 seconds or more.  This also happens periodically when I am doing something as simple as cutting into a timeline (just ripple deleting from and in to an out point). 
    I have a MacBook Pro running OSX 10.9.4 2 GHz Intel Core i7 with 16 GB 1600 MHz DDR3. 
    I have seen that some people are having different versions of the same problem.  I do have RedGiant plug-ins, but I am not using any of them in this project.  The Red Giant plugs (again, not being used in the project) include MOJO and Universe.  The previous version most certainly did not work like this.  Any ideas?  I did try moving the Red Giant plugs out of the COMMON folder and "alt" starting up to reset preferences.  Still having same problems.
    A specific example is I have an interview shot.  I add brightness and contrast.  Just making a change to the effect (increasing brightness) causes freezing of the interface and long delays.  I added a piece of transparent video on a top layer to add a CIRCLE to create a vignette effect.  Same deal -- ridiculously long times for effect changes to take place.
    Does anyone have any clues as to how to fix these problems? 
    THANKS FOR ANYONE'S HELP!!!!!!!

    Got the same Error. Previous I worked with a GTX 760, and was hoping to get it fixed with using a GTX 780 6GB. But just as you, didn't solve the Problem.
    Usually I got the Problem solved, with exiting Premiere, restarting it, reset my Workspace. Then the Problem of having the bugged Workspace was gone. And also the Problem of the missing Video Tracks.
    At the moment I started on a new Project. Pretty simple, with only a 21 second DV footage. And here I was switching tabs with my Browser, came back to the Project, and the Video Tracks were gone. I saved, closed Premiere, restated and the Video Tracks are still  missing.
    So I made a new Sequence, voilá the Video Tracks are there. Thus I need to copy and paste the Tracks onto the new Sequence.
    But that is not really a solution!
    I was on the Phone with Adobe, and on Chat, but they couldn't help me. They suggested to get a Tesla or Quadro Card, or at least a GPU that got confirmed as working on their page. I did that, but obviously, that is not the issue.

  • Working with audio | Learn Premiere Pro CS6 | Adobe TV

    This movie introduces the robust audio tools in Premiere Pro. Abba Shapiro shows how to preview and trim audio in the Source Monitor. Whether it’s an audio-only file or the audio channel of a video clip, Abba shows how to enable sub-frame audio scrubbing and trimming. He also shows how to interpret clips to combine or separate stereo channels. At the same time, he introduces fundamental audio tools that are essential to working with audio in Premiere Pro.
    http://adobe.ly/To00IZ

    Is it possible to specify what audio channels to capture during capture from tape? It seems Premiere wants to mix the lavaliere mic and camera mic into a stereo track all the time, and then I have to modify audio settings and force it to mono in the project. In Final Cut pro 7, I am able to specify which audio tracks to capture, and this simplifies things in editing. I cannot see anywhere to do this in Premiere....

  • What version of Elements will work with Canon Print Studio Pro

    What version of Elements will work with Canon Print Studio Pro?

    I tried this step but it did not work. I have a Mac YosemiteOS 10.10.1. I copied to plug in files from Canon Print Studio Pro. Open canon utilities, open print studio pro, open CS4 folder and copied files CNPSPP101.plugin and CNPSPP102.plugin (not there is also a folder called CS5 but it has the fame plugin files)
    I copy these files and then go to Photoshop Elements 13 and paste these files in Support File folder in Plug - ins and also did in folder Optional Plug-ins.
    I then open Photoshop Elements 13 and hit Automation tools but Canon Pro Studio option is not there.
    Can you provide more details on where I might be going wrong.
    I put in a trial version of Elements 12 and have no problem. I just can't find where to purchase Elements 12 so I do not lose it in 30 days. Know where I can  purchase?

  • Will my Cinema HD Display work with a new Mac Pro Quad Core?

    Will my Cinema HD Display work with a new Mac Pro Quad Core?

    Yes.
    Thunderbolt ports and displays: Frequently asked questions (FAQ)
    https://support.apple.com/kb/HT5219
    https://www.apple.com/thunderbolt/
    http://support.apple.com/kb/HT5299

  • Will a USB SuperDrive work with my Mac Book Pro?

    Will a USB Superdrive work with my mac booc pro?

    lorifromgermany,
    if you have a non-Retina MacBook Pro, the following command could allow a USB SuperDrive to work with it.
    Log in as an administrative user, open Terminal, run the following command within Terminal, close Terminal, and then restart your MacBook Pro:
    sudo nvram boot-args="mbasd=1"
    (When it asks you for a password, enter the administrative user’s password.)

  • Flash pro CS6 Air for iOS設定から"デバイスにインストール"の項目がなくなっている.

    以前より、Flash pro CS6のAir for iOSでの、実機へのインストールに不具合があり、原因が不明なため、
    Flash pro CS6自体を再インストールしました。
    その後、Air for iOS設定ダイアログを確認すると、「デプロイ」のページの最下部にあった、
    「アプリケーションをデバイスにインストールする」という旨の項目がなくなっていました。
    これは、Flash pro CS6のアップデートにより、新たにそのような仕様になったのでしょうか。
    それともこちらで何か必要な設定がありましたでしょうか。
    ご回答の程、よろしくお願いいたします。

    Flashメニューの「ヘルプ」→「アップデート」にて解消しました。

  • How can I use a file in flash cs6 that I made in flash cs5.5 air for android

    I have made an app in in air for android in flash cs5.5 air for android, and I want to edit it in cs6 and play it in cs6.
    But if I put Ctrl+Enter I got an error: createWin process failed with error 2: system couldn't find the file. I think the problem is that I'am using air for android 2.6 version in flash cs5.5 and version 3.2 in flash cs6. I have searched the web and found out that you can add older air versions using the sdk manager and I have tried it but first I get the error that the version of the sdk I am trying to install is not valid and after some files that I added to the sdk folder I get this error:Only SDK higher than version 3.4.2540 may be added.
    I there a possible way to update the air for android for an fla or apk? Or how can I let my originally file work fine in flash cs6??

    system couldn't find the file
    If you can´t get a more specific hint why your project can´t compile then I can think of some reasons theis error might occur
    1.You had files included besides the swf, like videos, audio files, xml files, that are not present in the place air expects them to be
    2.somewhere in your createWin functions there is a class import needed that isn`t present in 3.2 anymore, for example some classes or functions from classes that were valid in 2.6 are not any more in 3.2
    3. to achieve better eror logging, allow for debugging in the publishing options and see what specific lines in your code throw the error
    4.any air app needs a cert file, this needs to be created once, if you migrated to e new system it might be you never created that file which air expects to even begin the compiling process
    once you isolate the problem, report back

  • Flash Player 11.1 for Android 4.0 (11.1.115.81) does not support Android 4.3?

    Tried to install Flash Player 11.1 for Android 4.0 (11.1.115.81) on a device with Android 4.3, but failed to execute... Please help.

    There is no more Flash Player for Android and there won't be another. Android is no longer compatible with Flash Player (since June 2012). Playing Flash content is very processor consumptive and it drains your battery, also shortening the life of it. Android (Google) recommends using either "Dolphin" or "Puffin" as your browser if you need to view Flash content with a mobile device running Android. They're both available in the GooglePlay store. These browsers use "server side" rendering to reduce the load on your device.
    Note: You'll see loads of articles on "sideloading" Flash Player for Android. NEITHER Adobe nor Android support this method of installing and you're on your own if you go that route. The alternate browsers are your best bet.

  • Flash Lite 2.1 for Windows Mobile 5.0 Preview

    Hello,
    I'm happy to announce the preview release of Flash Lite 2.1
    for Windows Mobile 5.0, planned for release later this year. This
    allows mobile developers to create and test Flash Lite applications
    for both Windows Mobile 5.0 Smartphone and Windows Mobile 5.0
    Pocket PC configurations.
    For more information, visit the
    Adobe
    Flash Lite 2.1 for Windows Mobile 5.0 Preview site on Adobe
    Labs.

    To better help focus answers and information, please post all
    questions about Flash Lite 2.1 for Windows Mobile 5.0 devices in
    the new
    Flash
    Lite: Windows Mobile discussion forums.
    This forum is meant for questions around the Flash Player 6/7
    for Pocket PC and other consumer electronic devices using Flash
    technologies.
    thanks,

Maybe you are looking for