Working with Air and password protected SQLite

Hello,
How can I connect an Air application to an existing password protected SQLite db?
Thanks

So, guess this is impossible then ...
What are my options to develop a secured DB based application on Flex/Air?

Similar Messages

Took ipad to europe. it came home with ios7 and password protected

Help- took ipad to europe and it came home with passcode needed. i can't get in!

Try this:
http://support.apple.com/kb/HT1212
If that fails, you must restore it using iTunes.
Matt

HT201365 hello sir i purchase second hand iphone4s now my iphone ask for activation with id and password i contact with previous owner and use that id and password but that also not work what i do ola help me

hello sir i purchase second hand iphone4s now my iphone ask for activation with id and password i contact with previous owner and use that id and password but that also not work what i do ola help me i try all other method restore ' upgrade etc but none work plz say what i do if u find some solution tham msg me on [email protected]

First, we're not Apple here (Apple does not participate in this forum). We're only users like you.
The previous owner has not given you the correct ID and password for you to use.
If the iphone has iOS version 7, then read through the following...
http://support.apple.com/kb/HT5818

Hello sir i purchase second hand iphone4s now my iphone ask for activation with id and password i contact with previous owner and use that id and password but that also not work what i do ola help me i try all other method restore ' upgrade

hello sir i purchase second hand iphone4s now my iphone ask for activation with id and password i contact with previous owner and use that id and password but that also not work what i do ola help me i try all other method restore ' upgrade etc but none work plz say what i do if u find some solution tham msg me on
iPhone 4S

oenkz33 wrote:
this does not help at all for the second owner, after making the first owner id with careless, sorry for my english ...
Careless? Possible, but unlikely. Most likely the phone was stolen from the first owner. It would be a VERY careless iPhone owner who did not erase their personal information from a phone before selling it, and to do that it is necessary to disable Activation Lock. In most places in the world knowingly using stolen property is a crime, so the fact that the phone doesn't work may be the least of one's risks.

HT4882 hi apple it's kian ! i have mac book air with 10.7.2 version may keyboard light does'nt work with f5 and f6 ! please help me !

hi apple it's kian ! i have mac book air with 10.7.2 version may keyboard light does'nt work with f5 and f6 ! please help me !

Hello Kian,
This may sound silly but if you put your hand over the isight camera, do the lights change on the keyboard?
Ryan

HT202274 Apple ID has my old email address. It will not allow me to change the address and will not accept my password or ID questions. I recently upgraded to OSX Yosemite 10.10.1. I also have an Apple ID that works with iTunes and would like to keep i

Apple ID has my old email address. It will not allow me to change the address and will not accept my password or ID questions. I recently upgraded to OSX Yosemite 10.10.1. I also have an Apple ID that works with iTunes and would like to keep it as my primary.

To change the iCloud ID on your devices you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted (if using iOS 7), then sign back in with your current ID.
If you don't know the password for your old ID, or if it isn't accepted, you will have to temporarily recreate it in order to delete the existing account. To do this, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Using url with username and password in URL class

Hi,
I'm writting an applet in which I use getAppletContext().showDocument with an URL.
The problem is that I'm using URLs with username and password (http://user:[email protected]/page) and it isn't working because the browser is getting the URL http://user/page.
Is this a bug in the URL class? Or in the showDocument method?
Is there any way to make this work?
Thanks for any help,
Pedro Prospero Luis ([email protected])

I'm not sure whether this is supported behaviour. I've had this syntax fail to work in the Netscape address bar so I can't recommend it as an approach for authentication.
If you want to authenticate the user before redirecting to the page, though, you could try creating a connection to another page on the same server and sending the authorization information then. Your browser may then be successfully authenticated.
See http://www.javaworld.com/javatips/jw-javatip47.html for information on this.
You might not need to read back the page from the server, just connect to it. Might work.

Xserve, Windows 7 and password protected files

I have a Late 2006 Xserve running Sever OS 10.4.11 and I'm having a heck of a time connecting to any password protected files. For example, I can go "Map Network Drive", add the "Users" (\\xserve\Users\) folder and then access any unprotected folders within that directory (lets call them Bob and Tom), but not any of the password protected files (lets call that user Mike)
If I click on the Bob or Tom folders (under "Users") it lets me in, no problem.
If I click on the Mike folder (also mapped under "Users"), it says I don't have the correct access privileges. It's a straight up denial, no prompt for alternative login info.
My first thought was this; go "Map Network Drive" and map the Mike folder directly (\\xserver\Users\Mike), but use the correct login info (username/pass). It prompts me for the username and password. HERES WHERE I'M STUCK! No matter what I put for the username and password, it denies me. I've tried resetting the password (through the server interface), then sucesfully logged in using my MacBook Pro (using the exact same username/password I had been trying with Win-doze)
Again, I can connect to most of server files and folders from the Windows 7 machine (after following the "Set value to 'Send LM & NTLM' " procedure suggested by Vocal Jazz Fan on these forums. BIG THANK YOU!)
So, is this impossible to fix? Is it just the nature of the beast running Windows machines on a Mac server? Why is it only these protected files that I can't access? That seems so strange to me.
For a background, we had previously used Windows XP and logged into these folders with no problems.
Note: this server is at a community center and thus has very limited funds and computer expertise, hence the reason we're two full OS's behind. If we cannot get this to work, we're prepared to hire some server jockeys to completely overhaul our server (run Windows on our Xserve hardware), which will take 2-3 days at about $120 an hour. Please help!

I'd spend a few of those US$120 per hour hours with a Snow Leopard Server upgrade, as the software has matured substantially from Tiger Server to Leopard Server to Snow Leopard Server.
[Here are my crib notes for getting Windows to work with Mac OS X Server (Snow Leopard Server)|http://labs.hoffmanlabs.com/node/1590], which might be useful as a starting point.
With those Windows registry keys as search targets, there are a number of discussions of getting Samba password-protected shares to work with Windows and Windows 7 boxes posted around the network, both at Microsoft and via the Samba mailing lists.
These cases sometimes get as far as running Wireshark and dumping the network traffic, too.

FaceTime no longer working with Yosemite and IOS 8.1

I have used FaceTime flawlessly for some time with no issue.
After I upgraded to Yosemite on my MacBookAir and IOS8.1 on 5S and iPad air, I've had a problem connecting.
When I get a call, all the devices ring (as they should) but it will not connect on the first device I pick up on. It says connecting
but all the other devices keep ringing and finally it says I have a missed call. The connection does not happen. If I turn off
all devices except one, it will work...... do we have a bug here??

Thank you for responding to my issue. I spent the better part of two hours trying to get this to work. Bluetooth is enabled on all devices. Each computer is set in Preferences/General to allow Handoff. All computers and iPhones are on the same WiFi network. I toggled all of the major settings off and on. Rebooted each of my computers several times. I finally conceded defeat. Then my daughter asked to have a try at it. She worked on the first MBP for about thirty minutes and informed me that she had gotten continuity to work. And indeed, on her MBP late 2012 she is able to use the continuity features in both directions between her computer and her iPhone 6. But it only works with Mail and Safari. I asked how she accomplished this feat. She said she turned off "everything" on her computer and iPhone (WiFi, Bluetooth, "Allow handoff" under Preferences/General) and then rebooted both the iPhone and the computer. She then turned everything back on. This worked for her. So we tried the same thing on my MBP and iPhone 6. Now continuity works partially. Email activity is mirrored on both the MBP and the iPhone regardless of which device initiates the continuity activity. But Safari activity on the computer is mirrored on the iPhone but not in the opposite direction. There is no continuity function for Pages in either direction. The telephone connectivity works fine on all of my devices– 3 MBPs, Mac Pro, iPad Air, 2nd gen iPad and 3rd gen iPad.

Handoff not working with Yosemite and iOS 8

I have three Macbook Pros in my household. Two are mid 2012 models and the other a late 2012 model. Each is supposed to support the handoff feature of Yosemite and ios8. Everything seems to work properly between my daughter's late 2012 MBP and her iPhone 6. But on the other two MBPs in our family the continuity feature does not work on either of them. Receiving and sending calls works fine. But the continuity does not work even though all three MBPs and all three iPhone 6 are on the same wifi network.
I've tried all the suggestions that I could find. Toggling off and on the various settings on the MBPs and the iPhones.
John

Thank you for responding to my issue. I spent the better part of two hours trying to get this to work. Bluetooth is enabled on all devices. Each computer is set in Preferences/General to allow Handoff. All computers and iPhones are on the same WiFi network. I toggled all of the major settings off and on. Rebooted each of my computers several times. I finally conceded defeat. Then my daughter asked to have a try at it. She worked on the first MBP for about thirty minutes and informed me that she had gotten continuity to work. And indeed, on her MBP late 2012 she is able to use the continuity features in both directions between her computer and her iPhone 6. But it only works with Mail and Safari. I asked how she accomplished this feat. She said she turned off "everything" on her computer and iPhone (WiFi, Bluetooth, "Allow handoff" under Preferences/General) and then rebooted both the iPhone and the computer. She then turned everything back on. This worked for her. So we tried the same thing on my MBP and iPhone 6. Now continuity works partially. Email activity is mirrored on both the MBP and the iPhone regardless of which device initiates the continuity activity. But Safari activity on the computer is mirrored on the iPhone but not in the opposite direction. There is no continuity function for Pages in either direction. The telephone connectivity works fine on all of my devices– 3 MBPs, Mac Pro, iPad Air, 2nd gen iPad and 3rd gen iPad.

How do i personalize it and password protect it?

My internet works, I was trying to set up my new airport extreme and my computer froze in the process and now it works but the light blinks amber and its an open network connection that anyone can connect to. I tried a factory reset, but it won't go back to the easy setup process like the first time. It just opens and my computer connects. Any thoughts for how to rename the network and password protect it?

To rename the Network Name: AirPort Utility > Select the AirPort Extreme Base Station (AEBS) > Manual Setup > AirPort > Wireless tab > Wireless Network Name
To enable wireless security: AirPort Utility > Select the AEBS > Manual Setup > AirPort > Wireless tab > Wireless Security. I would recommend using "WPA2 Personal" for the security type.

Cannot print "working with files and folders htm

When I try to print "Working with files-and-folders" from a Google search, it only prints part of it. I have changed my destination folder to no avail. Thank you or any help, Jack Menendez

What's the best method for moving all my nonsystem related stuff over to this new driveIan has provided you with the best solution, SuperDuper.
But if you have a 250 GB external, you really ought to clone your entire system,(only about 3 GB) so you have a backup.
I keep mine with a complete clone of my internal, that way it is easy to boot from the external and run utilities like Disk Utility, TechToolPro, DiskWarrior, etc. on the internal and vice versa.
If you run into a problem with say Preferences and don't know which one is the troublemaker, just trash the whole pref folder and use the good one from the clone. Font problem, same deal. And, if diaster ever strikes, you can just boot up from your external and keep right on working - fix the internal when you have time.
That's my 2 cents anyway
-mj
[email protected]

Conference link with login and password included

Hi,
I have been trying to find a way to make Adobe Connect send meeting invitation e-mails with login and password included in the link - unfortunately to no avail.
Does anyone know, if it's at all possible to do it and if so, how it's done?
I'm still on a trial version, but I've been assured, that it shoudn't be a problem.
Thanks in advance for any hints!
Kamil

OK, I played with it and here is how I got it to work:
Appending the URL:
The URL would need to be appended with /?login=username&password=password. The "api/xml?action=" string was incorrect. I verified that this does work.
The full URL would look similar to this: http://realeyesconnect.adobeconnect.com/bestroomever/?login=myusername&password=drowssap
The login can also be done programmatically.You would need to do the following steps to get the log-in to be automatic.
Log the individual into the server:http://YourServerURL/api/xml?action=login&login=username&password=password
Should return a value of OK
Get the BREEZESESSION cookie for the user:
http://YourServerURL/api/xml?action=common-infoShould show a value similar to this:<cookie>na3breezr59qzu2pp2qy4zdm</cookie>
Log the user in to the room with the cookie:http://YourServerURL/RoomLink/?session=na3breezr59qzu2pp2qy3zdm
Guest names can also be added to the url link. These options are described here: http://help.adobe.com/en_US/connect/9.0/webservices/WS5b3ccc516d4fbf351e63e3d11a171dd2d4-7 ff4_SP1.html

Is it possible to lock a layer within a document and password protect that specific layer?

Is it possible to lock a layer within a document and password protect that specific layer?

As stated, no way to do exactly what you want, but an option might be to turn OFF Visibility for that Layer, if you do not want it seen, and then Flatten, and do a Save_As.
If you do want that Layer seen, but not able to be edited, then Flatten, with Visibility ON, and Save_As.
The question is, do you want the recipient to see that Layer, or not?
Next, Do they need to be able to edit all other Layers, but just not that one?
Last, what type of Layer is it?
Good luck,
Hunt

PC Used to work with XP and airport Extreme Basestation but not with Vista

Please help, my PC Used to work with XP and airport Extreme Basestation but not now with Vista. I have a MacBook Pro connected and also a Mac Pro connected to the network on it and they still work, i have put the latest software on the PC and the firmware is up to date. The only thing i can see on the network on the PC is the basestation Hard Disk (shared also to the Macs) but i cannot connect with the password, i have tried everything in my knowledge, including formatting the machine and reinsatlling OS and changing security setting to no avail. Any ideas anyone?

With regard to your printer problem - take a look at this discussion:
http://discussions.apple.com/thread.jspa?messageID=6312413&tstart=0

Working with Air and password protected SQLite

Similar Messages

Maybe you are looking for