Working with clips after audio has been extracted

Can anyone tell me if it is possible to trim clips once the audio has already been extracted? I have tried to do this, but the trimming only applies to the video strand, leaving the audio full length (an out of sync).
Or does any trimming have to be done before audio extraction?
Thanks.

Go into the "timeline" mode (as opposed to the "clips" mode). Place the playhead at the point you want to make the cut. Click on the video clip, and you will be able to "split" the video clip. Leave the playhead alone, then click on the corresponding extracted audio clip below the video clip. You will be able to "split" the audio clip. You may then want to "lock" the audio clip to the video clip at the playhead, so that it stays in sync.
If you already split the video clip and moved it, you may be able to re-sync it with the audio by dragging the audio clip in the timeline mode. In addition, if you set the preference to snap to the beginnings of clips, you should be able to accurately re-sync.

Similar Messages

Bridge does not mark thumbnails with icon after file has been worked.

I use Windows Vista and process photo files in Bridge using the latest Camera Raw plug-in and Photoshop CS2. Bridge does not mark each thumbnail with a icon as it should after processing. I use the same PS program on another computer using Windows XP and Bridge does mark each thumbnail with an icon. Why will Bridge not mark each thumbnail with an icon as stated in the PS manual on my Vista computer?

I use Vista and CS3, Bridge marks my RAW files when changes are made. Check to see if you have different settings in Bridge between the 2 computers. PS is not supported by Vista Basic.

After exporting a video from imovie, to quicktime, the audio has been duplicated. How can I fix this?

after exporting a video from imovie, to quicktime, the audio has been duplicated. How can I fix this?

iMovie works best with uncompressed audio. If your track is MP3 or AAC, you may get better results by converting your track to the AIFF format and then using that in iMovie.
You can do this in iTunes. Go to iTunes/Preferences and click the General button. On the General page, click the Import Settings button. Choose IMPORT USING: AIFF ENCODER.
(note: remember what you changed it from so you can change it back later, before you import another CD)
Now, in iTunes, select your track. Then click FILE/CREATE NEW VERSION/AIFF VERSION.

I use an online application that doesn't work with FF, but I had been able to use an IE plugin within FF and it worked fine. After the last update (3.6.12), it says plugin is not compatable with version. Help?

I use an online application that doesn't work with FF, but I had been able to use an IE plugin within FF and it worked fine. After the last update (3.6.12), it says plugin is not compatable with version. Help

go to '''TOOLS '''then '''OPTIONS''' then '''ADVANCED''' then '''NETWORK tab''' then '''SETTINGS tab''' and select the options '''NO PROXY''' click '''OK''' and '''OK '''again in the next screen. With that you have disabled the proxy settings.
''if you like to not disable the proxy settings choose'' : '''Auto-detect proxy settings for this network''' (it is in the same session)
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

What do i do with my downloads in my downloads folder after software has been updated? do i move it to trash? or??

what do i do with my downloads in my downloads folder after software has been updated? do i move it to trash? or??

So it would be safe to just delete them? the reason why i ask is because for example when i first stared using youtube on my macbook pro(OSX Lion) it required the flash update. I updated flash but the download still remained in the download file on the dock. So it would be safe to delete once it was updated correct?

Can You Still Track YOur Iphone 5 With Ios7 Activation Lock After It Has Been Restored?

Please Help My Iphone 5 With IOS7 Activation Lock, Was Stolen And I Am Activately Tracking It and I Was Wondering If It Was Posssible To Keep Tracking IT After It Has Been Restored

It can't be restored unless the thief knows your Apple ID and password.
What To Do If Your iDevice or Computer Is Lost Or Stolen
iPhone, iPod Touch, and iPad
If you activated Find My Phone before it was lost or stolen, you can track it only if Wi-Fi is enabled on the device. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T. Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. What to do if your iOS device is lost or stolen
6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
7. Find My iPhone
8. Report Stolen iPad | Stolen Lost Found Online
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on iCloud
3. OS X Lion/Mountain Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
Mac Computer
       Find My Mac can be used from Find My Phone at iCloud.com and via Find
       My Phone on your iDevice.
      The following is third-party anti-theft software:
           1. STEM 2.1
           2. MacPhoneHome 3.5
           3. MacTrack 7.5.0
           4. VUWER 1.7
           5. Sneaky Bastar* 0.2.0
           6. Undercover 5.1.1
           7. LoJack for Laptops
           8. Hidden 2.0

After Firefox has been running a while, every link opens a new window

After Firefox has been running for a while, every link starts opening in a new window. Until today, if I closed Firefox and restarted it, it would stop happening ... until it started happening again. Then today, I closed it down and restarted it, and it was STILL happening. So either I find a solution, or I stop using Firefox on my Mac.
This is a vanilla installation - both for the Mac and Firefox. I don't use the Mac as my main computer. The Mac is running OS X 10.5 8. The problem has existed through many upgrades of Firefox. I always upgrade as requested. This last time, however may have been the killer. A new upgrade was installed right before the problem became unfixable by shutting down and restarting. I'm running Firefox 15.0. I just rebooted, however, and now (for now), it's working properly.
I have no add-ons installed in Firefox.
My only plug-ins are iPhotoPhotocast, QuickTime, SharePoint, and Shockwave Flash.
I've seen multiple reports of this problem on this Web site, but no solutions. Just a generic recommendation to disable add-ons to see which one is conflicting. But I'm running no add-ons. I think there's a bug in Firefox.

If it were an extension or theme or a Mac driver, wouldn't it cause the problem consistently? This only happens after Firefox has been running for a while. I'm using Firefox to type this reply right now, and the problem is not happening.
And it's not because I suddenly start using some offending software. As I said, I don't use the Mac as my main computer. Usually I'll have been using my PC, I'll go back to the Mac to check my email on Firefox, and suddenly the link problem is happening. I only use the Mac to check email on the server before I download it with Outlook (on the PC) so I can delete spam on the server first.

Workflow Shows as 'In Progress' after Workflow has been completed.

Hello All,
I have created a custom workflow using SharePoint Designer. Within this workflow I have multiple 'approval process' tasks. In theory this was so that once the first user had approved the item then the next would be prompted to approve the item, and
so on. The users that the item must be approved by are set when the item is submitted initially.
Just so anyone reading this knows I have no formal experience/education in SharePoint workflow design, but I would like to think I know my way around SharePoint(in general) at this point.
My problem is, the company I work for is just starting out using SharePoint workflows, and from what I understand workflows that are 'In Progress' are related to server performance. I noticed today that there are 5 items in the list which
under the 'workflow status' column display that they are 'In Progress' which is entirely correct. However, when I go to -> 'List Settings' -> 'Workflow Settings' this workflow is showing 8 workflows 'In Progress'.
Thank you to anyone who is able to help me with this,
James

Hi,
According to your post, my understanding is that workflow shows as 'In Progress' after Workflow has been completed.
To send the task one by one, you can select one at a time(serial) when you select Task Process Participants.
Per my knowleadge, when you go to -> 'List Settings' -> 'Workflow Settings', it show all the workflows you associated to the list.
To see the running workflow, you need to select an item, right click the title, and then select the workflow.
However, each workflow enstance can only start once on an item. In other word, you can not start the same workflow again untill the previous one is completed.
As you said, workflow shows as 'In Progress'.
Please make sure all the users have approved the tasks.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

SQLException: After clearParameters() has been called, all parameters must be reset before executing

Hi,
I am running: Weblogic 6.1, SP2
Driver : weblogic.jdbc.oci.Driver
Reason for not using the "thin" driver, which works, is limit
on size of Clob
Previous references to this problem in this newsgroup indicate driver problems
with older versions of WL.. I am using the latest..
The SQLException I get is "After clearParameters() has been called, all parameters
must be reset before executing". This happens the second time the code below is
excuted ( ok the first time )
"clearParameters()" is never called explicitly in my code.
The exception occurs on the "spFunc.execute();" statement at the very end of this
code:
// OBS:connection, conn_, is opened from a connection pool
before this code is called and cloesed afterwards.
conn_.setAutoCommit(false);
// ============== Initializing clob ==================
SerialStatement stmt = (SerialStatement)conn_.createStatement();
stmt.execute("INSERT INTO lc_clob_temp VALUES (1, EMPTY_CLOB())");
// OBS: using a prepared statement here will result in SerialClob
// exception when using setClob in the prepared statement
below
// This is probably a bug ( worked in WL 5.1 ). We had this
as a support case 270952 with WebLogic.
stmt.execute("SELECT * FROM lc_clob_temp WHERE id = 1");
ResultSet crs = stmt.getResultSet();
weblogic.jdbc.rmi.SerialClob xmlClob = null;
while ( crs.next() ) {
xmlClob=(weblogic.jdbc.rmi.SerialClob)crs.getClob("newclob");
// Call Oracle's stored procedure for calling Oracle XSU.
SerialCallableStatement spFunc =
(SerialCallableStatement)conn_.prepareCall(
"declare " +
"insCtx sys.DBMS_XMLSave.ctxType; " +
"begin " +
"insCtx := sys.DBMS_XMLSave.newContext(?); " +
"sys.DBMS_XMLSave.setBatchSize(insCtx,0);" + "sys.DBMS_XMLSave.setCommitBatch(insCtx,
0);" +
"? := sys.DBMS_XMLSave.insertXML(insCtx,?); " +
"sys.DBMS_XMLSave.closeContext(insCtx); " +
"end;"
spFunc.setString(1, viewName );
spFunc.registerOutParameter (2, Types.NUMERIC);
Writer outstream = xmlClob.getCharacterOutputStream();
outstream.write(xml.toString());
outstream.flush();
outstream.close();
spFunc.setClob( 3, xmlClob);
spFunc.execute();
spFunc.close();

Hi,
I am running: Weblogic 6.1, SP2
Driver : weblogic.jdbc.oci.Driver
Reason for not using the "thin" driver, which works, is limit
on size of Clob
Previous references to this problem in this newsgroup indicate driver problems
with older versions of WL.. I am using the latest..
The SQLException I get is "After clearParameters() has been called, all parameters
must be reset before executing". This happens the second time the code below is
excuted ( ok the first time )
"clearParameters()" is never called explicitly in my code.
The exception occurs on the "spFunc.execute();" statement at the very end of this
code:
// OBS:connection, conn_, is opened from a connection pool
before this code is called and cloesed afterwards.
conn_.setAutoCommit(false);
// ============== Initializing clob ==================
SerialStatement stmt = (SerialStatement)conn_.createStatement();
stmt.execute("INSERT INTO lc_clob_temp VALUES (1, EMPTY_CLOB())");
// OBS: using a prepared statement here will result in SerialClob
// exception when using setClob in the prepared statement
below
// This is probably a bug ( worked in WL 5.1 ). We had this
as a support case 270952 with WebLogic.
stmt.execute("SELECT * FROM lc_clob_temp WHERE id = 1");
ResultSet crs = stmt.getResultSet();
weblogic.jdbc.rmi.SerialClob xmlClob = null;
while ( crs.next() ) {
xmlClob=(weblogic.jdbc.rmi.SerialClob)crs.getClob("newclob");
// Call Oracle's stored procedure for calling Oracle XSU.
SerialCallableStatement spFunc =
(SerialCallableStatement)conn_.prepareCall(
"declare " +
"insCtx sys.DBMS_XMLSave.ctxType; " +
"begin " +
"insCtx := sys.DBMS_XMLSave.newContext(?); " +
"sys.DBMS_XMLSave.setBatchSize(insCtx,0);" + "sys.DBMS_XMLSave.setCommitBatch(insCtx,
0);" +
"? := sys.DBMS_XMLSave.insertXML(insCtx,?); " +
"sys.DBMS_XMLSave.closeContext(insCtx); " +
"end;"
spFunc.setString(1, viewName );
spFunc.registerOutParameter (2, Types.NUMERIC);
Writer outstream = xmlClob.getCharacterOutputStream();
outstream.write(xml.toString());
outstream.flush();
outstream.close();
spFunc.setClob( 3, xmlClob);
spFunc.execute();
spFunc.close();

On messages i put on my email adress to sign in. then it gives me unable to verify adress. an email with a verification link has been sent to the above email adress. what do i do?

I am so angry at messages because when i am trying to sign in, they want my email adress. when i put my email adress it says unable to verify adress. an email with a verification link has been sent to the above email adress. I did that like over a billon times and i am so desprate to talk with my friends. please please help this is really troubling me. i even tried to put in my apple id and still didn't work all it said check mail but i delete it. plz plz help

The message you go says that Apple sent to the email account you used an email to verify your email account. You have to open up that email message and then click on the link inside to complete verifying the email address.

Set Cursor.vi fails after it has been called for 30 different panel refs in LV 7.1.1

Make sure both attached files (Run LabVIEW_Cursor_TestCase.vi, SimpleVI.vi) are in the same folder. Run LabVIEW_Cursor_TestCase.vi notice that the -3 error code is returned from "Set Cursor.vi" after it has been called with 30 different panel refs. If "Set Cursor.vi" is replaced with "Set Busy.vi" the same error occurs.Is there a workaround for this problem other that setting the cursor image manually in user32.dll? I must be able to open more than 30 panels and set them all to busy. In the test case I used a single VI, simply to demonstrate the error.
Message Edited by Jerred on 05-04-2007 10:06 AM
Attachments:
LabVIEW_Cursor_TestCase.vi ‏68 KB
SimpleVI.vi ‏13 KB

This bug is fixed in LabVIEW 8.0 and later. Unfortunately, I know of no workaround in LabVIEW 7.x. When I encountered this bug in one of my UIs in LabVIEW 7.x, my "fix" was simply to ignore the error outputs from the cursor VIs, and to live with the fact that I had no custom cursors after 30 windows had been opened.
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

I bought pages ages ago using an iTunes account that no longer works as the email address has been closed down. How can I now update my Pages app, if it asks me to sign in using this now defunct email address?

I bought Pages ages ago using an iTunes account that no longer works as the email address has been closed down. How can I now update my Pages app, if it asks me to sign in using this now defunct email address?

All apps are always tied to the account from whaich they were purchased and will always have to be updated using that account.
Just because the e-mail account is shut down, has nothing to do with the itunes account. Why did you create a new account? Why not just change the e-mail associated with the old account?

PC Suite stops working with Bluetooth after Laptop...

I use PC Suite and Bluetooth to connect to my Phone. I use the Synchronise, and the Messages feature a great deal. It all works great after a reboot, and I think it's a real credit to Nokia that they provide this free and improve their standing compared to other manufacturers.
However, the latest versions of PC Suite have taken a backward step in hardware compatibility. Previously, no matter what state my laptop was in - ie rebooted, returned from hibernate or standby, the laptop would connect to my phone over Bluetooth, and synchronizing would happen. When my phone went out of range, the connection would drop, and when it came back into range, the connection would re-establish and synchronizing would start again - wonderful!
Now, this only works after clean reboot, and after I have manually clicked on "Get Connected". After my laptop returns from standby, if I try "Get Connected" I get the error:
"Cannot use the connection type. Check that all the needed hardware, software and drivers are available. (Code: OpenMedia)"
To get PC Suite working with Bluetooth after returning from standby I run a Repair, after which it works beautifully.
Is this a known fault? I have uninstalled and re-installed PC Suite and the BT Stack as recommended in other posts to solve other issues. My configuration is:
Operating system: Microsoft Windows XP
Nokia PC Suite: Version 6.82.22.0
Bluetooth Stack for Windows by Toshiba v4.00.23(D) SP2
Bluetooth Specification: Version 2.0, 1.2, 1.1
Many thanks...

Thanks for your response Miksu. You have pointed me to the right place. It is the connection manager that fails to recognise the BT stack that causes my problems. This is always resolved by a repair. It seems that the order of initiation is very important which may be why Luist has started to have the problem.
In my experience, once things stop to work, I've had to strip out any subsequent installs.
My PCSuite also stopped working after it installed cable connection manager (or something like that) without me asking. I found it in Control Panel->Add/Remove programs. I removed it and PC Suite started to work again, so I completely removed PC Suite then re-installed, and allowed it to add the relevant devices relating to my phone (about 4 devices alltogether) but alas this did not solve my "return from standby" issue. I think I need to remove PC Suite and then Bluetooth, and maybe something else before re-installing - I'll leave that for a rainy day.
Thanks again Miksu

A problem with the cooling system has been detected

I bought a new computer not to long ago, I've had it for almost a month now. It runs fine, and I've had no problems until not too long ago. I was playing a game, and I got a random error message: "A problem with the cooling system has been detected. Please turn off the computer immdiately, and return it for service." I don't understand how or why this came up, and I don't have any money to return it for any type of repairs. After I got this message, I left my computer off for about an hour. All seems well so far. Any suggestions?

What laptop do you have?
- Peter

How do i get back my stateful session bean after it has been passivated

hi ,
How do i get back my stateful session bean after it has been passivated by container.
i'm confused that is it possible or not .......give me answer
i've one stateful sessionbean which i'm accessing throgh my normal java client . now what i'm doing is when i first time call a method it is running ......then i'm shutting down the server jboss .......it is calling my ejbPassivate() method ... at this particular time client program doesn't do anything.....
now after i restart my server i'm again calling back that business method with that last object reference.......it gives me the exception given below.....
java.rmi.NoSuchObjectException: no such object in table
java.rmi.NoSuchObjectException: no such object in table
     at sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(Unknown Source)
     at sun.rmi.transport.StreamRemoteCall.executeCall(Unknown Source)
     at sun.rmi.server.UnicastRef.invoke(Unknown Source)
     at org.jboss.invocation.jrmp.server.JRMPInvoker_Stub.invoke(Unknown Source)
     at org.jboss.invocation.jrmp.interfaces.JRMPInvokerProxy.invoke(JRMPInvokerProxy.java:118)
     at org.jboss.invocation.InvokerInterceptor.invokeInvoker(InvokerInterceptor.java:227)
     at org.jboss.invocation.InvokerInterceptor.invoke(InvokerInterceptor.java:167)
     at org.jboss.proxy.TransactionInterceptor.invoke(TransactionInterceptor.java:46)
     at org.jboss.proxy.SecurityInterceptor.invoke(SecurityInterceptor.java:55)
     at org.jboss.proxy.ejb.StatefulSessionInterceptor.invoke(StatefulSessionInterceptor.java:106)
     at org.jboss.proxy.ClientContainer.invoke(ClientContainer.java:86)
     at $Proxy1.makeNewAcc(Unknown Source)
     at client.GanJavaClient.main(GanJavaClient.java:46)so pls tell me that is it possible to get back that session besn or not

Stateful session beans are not persisted across restart of the EJB server instance(s) hosting them. You can't treat a Session bean as one would an entity bean.
Chuck

Working with clips after audio has been extracted

Similar Messages

Maybe you are looking for