Working with clips, channels, and tracks

This question was posted in response to the following article: http://help.adobe.com/en_US/premierepro/cs/using/WS1c9bc5c2e465a58a91cf0b1038518aef7-7f49a .html

Hi, I've been editing on FCP and just started working Premiere and I'm having a problem with audio channels, which I'm not sure is covered in the channel mapping explanation in this page. I'm importing my stereo clips using the stereo media as mono setting so I can edit the channels separately (I have dialogue on the left channel and nothing on the right), but when I export them they appear as two identical channels, with no left/right separation. Can anyone tell me what settings I need to use to keep the channels as discrete Left and Right stereo. If I have to map the tracks to tell Premiere which track plays left and right do I have to do this every time I start a new project? I didn't have to do this in FCP and it seems like there must be a less complicated and time-consuming way to make the program play the left channel out of the left speaker and the right channel out of the right speaker.

Similar Messages

  • Wireless Bridge Not working with 5200,5220 and 5240 channels

    Hi Team;
                         I am setting up a bridge connection with 1262 AP as the root and 3502 as the non root and i observed that it is working with only  channel 36. If i am setting up other channels like 40,44 & 48 its not working.
    My partnumber is 3502E-E-k9 and 1262E-E-K9

    Post your radio interface configuration in both ROOT & NON-ROOT to check. 
    HTH
    Rasika

  • Working with AVCHD: Log and Transfer FAQs

    Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
    Working with AVCHD: Log and Transfer FAQs
    Log and Transfer was introduced to the product chain in Final Cut Express 4, and is the program's process for ingesting files in the AVCHD format utilizing MPEG-4 AVC/H.264 video coding and either Dolby AC-3 or uncompressed linear PCM audio coding. The most frequently observed problems relating to the Log and Transfer process are generally quite easily addressed.
    What should I know before attempting to ingest my footage?
    The following facts regarding the Log and Transfer process were adapted from the [Apple Knowledge Base article|http://support.apple.com/kb/TA24840?viewlocale=en_US] on transferring AVCHD in Final Cut Pro 6.0.1 but still hold true for the current version of FCE:
    AVCHD support is available only on Intel-based Macintosh computers.
    AVCHD camcorders typically connect to computers via USB 2.0, not FireWire.
    DVD-based AVCHD camcorders are not supported in Mac OS X 10.4 or earlier.
    Standard definition video recorded with AVCHD camcorders cannot be accessed in the Log and Transfer window. SD and HD clips should not be mixed on the same HDD.
    Preview of AVCHD video in the Log and Transfer window is limited to 1x forward playback. Scrubbing the playhead does not update the video in the Preview area until you stop scrubbing.
    When you choose to transfer AVCHD audio in the Logging area, audio is automatically mixed down to stereo.
    AVCHD footage is not ingested natively but is transcoded to the Apple Intermediate Codec.
    Apple Intermediate Codec files are significantly larger than the original AVCHD files. FCE does not estimate the size of a transcoded AVCHD file before ingesting, so it is possible to exceed the available space on your capture disk during transfer. Before ingesting, keep in mind that the disk space required is about ten times greater than the size of the native AVCHD file.
    Which specific formats can be ingested by Log and Transfer?
    Only AVCHD footage can be ingested through the Log and Transfer process. Other formats and variants such as AVCHD Lite are not supported. All video should be recorded in a frame size of either 1440x1080 or 1920x1080 and a frame rate of 25 or 29.97 frames per second. Audio recorded on AVCHD camcorders is generally at a rate of 48kHz. If your camera shoots in a format that does not comply with one of these setups then it is most likely not supported by the application and is not guaranteed to work correctly.
    Which Easy Setup preset should I select before ingesting my footage?
    It is extremely important to select the preset that matches your media before you attempt to ingest via Log and Transfer. There is only one Easy Setup preset that matches the frame size and rate of your footage. If you intend to ingest AVCHD clips through Log and Transfer you will first need to select one of the following presets:
    AVCHD-Apple Intermediate Codec 1440x1080i50
    AVCHD-Apple Intermediate Codec 1440x1080i60
    AVCHD-Apple Intermediate Codec 1920x1080i50
    AVCHD-Apple Intermediate Codec 1920x1080i60
    If these four options do not appear under your Easy Setup list then you probably need to run Software Update and update to FCE 4.0.1. DO NOT cycle through the available presets until you find one that works - there is only one preset that matches your media and it should be evident which one to choose by the way it is named. Select the AVCHD preset that mentions your frame size and frame rate (i50 presets support both 50i and 25p frame rates; similarly, i60 presets support both 60i and 29.97p frame rates). If you do cycle through many options in the hope of selecting the correct one through guess-and-check you will probably have corrupted your preference file and need to [trash your preferences|http://support.apple.com/kb/TS2611] before continuing.
    Why don't my clips appear when I open the Log and Transfer window?
    Make sure your camcorder records AVCHD in a format supported by FCE4. It should be connected to one of your computer's USB ports (never connect it to an external hard drive or other external device such as your keyboard or a USB hub), powered on, and set to video playback mode.
    If the camcorder +does not+ mount on your Desktop your USB port or cable may be malfunctioning. Try plugging it in to another port or using a different USB cable to see if it makes a difference.
    If the camcorder does mount on your Desktop but the clips do not appear in the Log and Transfer window you will need to point the program to the directory that contains your media.
    First, click the Add Folder button in the upper left of the Log and Transfer window. The button looks like this:
    Then, you will need to navigate to the root directory in which your media is stored. Most camcorders call this folder "PRIVATE" or "AVCHD" and it should be located at the very top level of the camcorder when mounted. If your camcorder records to a valid AVCHD directory structure then your clips should load after the Add Folder process is completed.
    I would like to keep a working backup of my original clips so that I can delete them off the camcorder's internal memory. How should I do this?
    There are two main ways to keep a backup of your clips. The first is to ingest every clip on your camcorder through the Log and Transfer process, and store the Apple Intermediate Codec files the application creates in an easily accessible place such as an external FireWire drive. The advantage of this method is that you have the ability to open back up old editing projects, reconnect the media as necessary, and keep going as if you'd never left. However, due to the large amount of space AIC takes up (usually somewhere in the vicinity of 41-50GB an hour when transcoded from AVCHD), this is not always feasible.
    Another often preferable approach is to copy over the root directory in which your clips are stored (usually named "PRIVATE" or "AVCHD") from the camcorder to your computer or an external drive. As long as you maintain the original file structure, you will be able to ingest your clips again at a later date using the "Add Folder" process detailed above to navigate to their new location.
    My clips appear, but when I attempt to ingest a red exclamation point appears and the window displays the message "Error: No Data"
    This is one of the most common problems that users experience when trying to ingest their media through the Log and Transfer process. Luckily, it also has one of the easiest solutions.
    In the Log and Transfer window, click on the gear icon in the top right and select "Preferences" in the contextual menu that appears.
    Make sure the video is set to transcode to the Apple Intermediate Codec and the audio is set to Plain Stereo.
    After doing so, hit OK and try to ingest again.
    I am experiencing a problem that is not covered in this tip or the solutions here do not work.
    The best thing to do at this point would be to trash your preferences and start a new topic in the [FCE Forum|http://discussions.apple.com/forum.jspa?forumID=936&start=0] with a detailed description of your problem. Check out the user tip on [Basic Troubleshooting in Final Cut Express|http://discussions.apple.com/thread.jspa?threadID=2662419] for more information.
    This is the 1st version of this tip. It was submitted on December 03, 2010 by skalicki`.
    Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

    Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
    Working with AVCHD: Log and Transfer FAQs
    Log and Transfer was introduced to the product chain in Final Cut Express 4, and is the program's process for ingesting files in the AVCHD format utilizing MPEG-4 AVC/H.264 video coding and either Dolby AC-3 or uncompressed linear PCM audio coding. The most frequently observed problems relating to the Log and Transfer process are generally quite easily addressed.
    What should I know before attempting to ingest my footage?
    The following facts regarding the Log and Transfer process were adapted from the [Apple Knowledge Base article|http://support.apple.com/kb/TA24840?viewlocale=en_US] on transferring AVCHD in Final Cut Pro 6.0.1 but still hold true for the current version of FCE:
    AVCHD support is available only on Intel-based Macintosh computers.
    AVCHD camcorders typically connect to computers via USB 2.0, not FireWire.
    DVD-based AVCHD camcorders are not supported in Mac OS X 10.4 or earlier.
    Standard definition video recorded with AVCHD camcorders cannot be accessed in the Log and Transfer window. SD and HD clips should not be mixed on the same HDD.
    Preview of AVCHD video in the Log and Transfer window is limited to 1x forward playback. Scrubbing the playhead does not update the video in the Preview area until you stop scrubbing.
    When you choose to transfer AVCHD audio in the Logging area, audio is automatically mixed down to stereo.
    AVCHD footage is not ingested natively but is transcoded to the Apple Intermediate Codec.
    Apple Intermediate Codec files are significantly larger than the original AVCHD files. FCE does not estimate the size of a transcoded AVCHD file before ingesting, so it is possible to exceed the available space on your capture disk during transfer. Before ingesting, keep in mind that the disk space required is about ten times greater than the size of the native AVCHD file.
    Which specific formats can be ingested by Log and Transfer?
    Only AVCHD footage can be ingested through the Log and Transfer process. Other formats and variants such as AVCHD Lite are not supported. All video should be recorded in a frame size of either 1440x1080 or 1920x1080 and a frame rate of 25 or 29.97 frames per second. Audio recorded on AVCHD camcorders is generally at a rate of 48kHz. If your camera shoots in a format that does not comply with one of these setups then it is most likely not supported by the application and is not guaranteed to work correctly.
    Which Easy Setup preset should I select before ingesting my footage?
    It is extremely important to select the preset that matches your media before you attempt to ingest via Log and Transfer. There is only one Easy Setup preset that matches the frame size and rate of your footage. If you intend to ingest AVCHD clips through Log and Transfer you will first need to select one of the following presets:
    AVCHD-Apple Intermediate Codec 1440x1080i50
    AVCHD-Apple Intermediate Codec 1440x1080i60
    AVCHD-Apple Intermediate Codec 1920x1080i50
    AVCHD-Apple Intermediate Codec 1920x1080i60
    If these four options do not appear under your Easy Setup list then you probably need to run Software Update and update to FCE 4.0.1. DO NOT cycle through the available presets until you find one that works - there is only one preset that matches your media and it should be evident which one to choose by the way it is named. Select the AVCHD preset that mentions your frame size and frame rate (i50 presets support both 50i and 25p frame rates; similarly, i60 presets support both 60i and 29.97p frame rates). If you do cycle through many options in the hope of selecting the correct one through guess-and-check you will probably have corrupted your preference file and need to [trash your preferences|http://support.apple.com/kb/TS2611] before continuing.
    Why don't my clips appear when I open the Log and Transfer window?
    Make sure your camcorder records AVCHD in a format supported by FCE4. It should be connected to one of your computer's USB ports (never connect it to an external hard drive or other external device such as your keyboard or a USB hub), powered on, and set to video playback mode.
    If the camcorder +does not+ mount on your Desktop your USB port or cable may be malfunctioning. Try plugging it in to another port or using a different USB cable to see if it makes a difference.
    If the camcorder does mount on your Desktop but the clips do not appear in the Log and Transfer window you will need to point the program to the directory that contains your media.
    First, click the Add Folder button in the upper left of the Log and Transfer window. The button looks like this:
    Then, you will need to navigate to the root directory in which your media is stored. Most camcorders call this folder "PRIVATE" or "AVCHD" and it should be located at the very top level of the camcorder when mounted. If your camcorder records to a valid AVCHD directory structure then your clips should load after the Add Folder process is completed.
    I would like to keep a working backup of my original clips so that I can delete them off the camcorder's internal memory. How should I do this?
    There are two main ways to keep a backup of your clips. The first is to ingest every clip on your camcorder through the Log and Transfer process, and store the Apple Intermediate Codec files the application creates in an easily accessible place such as an external FireWire drive. The advantage of this method is that you have the ability to open back up old editing projects, reconnect the media as necessary, and keep going as if you'd never left. However, due to the large amount of space AIC takes up (usually somewhere in the vicinity of 41-50GB an hour when transcoded from AVCHD), this is not always feasible.
    Another often preferable approach is to copy over the root directory in which your clips are stored (usually named "PRIVATE" or "AVCHD") from the camcorder to your computer or an external drive. As long as you maintain the original file structure, you will be able to ingest your clips again at a later date using the "Add Folder" process detailed above to navigate to their new location.
    My clips appear, but when I attempt to ingest a red exclamation point appears and the window displays the message "Error: No Data"
    This is one of the most common problems that users experience when trying to ingest their media through the Log and Transfer process. Luckily, it also has one of the easiest solutions.
    In the Log and Transfer window, click on the gear icon in the top right and select "Preferences" in the contextual menu that appears.
    Make sure the video is set to transcode to the Apple Intermediate Codec and the audio is set to Plain Stereo.
    After doing so, hit OK and try to ingest again.
    I am experiencing a problem that is not covered in this tip or the solutions here do not work.
    The best thing to do at this point would be to trash your preferences and start a new topic in the [FCE Forum|http://discussions.apple.com/forum.jspa?forumID=936&start=0] with a detailed description of your problem. Check out the user tip on [Basic Troubleshooting in Final Cut Express|http://discussions.apple.com/thread.jspa?threadID=2662419] for more information.
    This is the 1st version of this tip. It was submitted on December 03, 2010 by skalicki`.
    Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

  • Working with effects, styles and properties on MediaElements

    Hi,
    is it possible to add any kind of Image/Video/Audio effects on subclasses of MediaElement? Like PixelBender-Effects for Images or what I'm looking for is a backgroundAlpha - property like the VideoDisplay-Component provides in Flex. I want to work with Videos which provides a alpha-channel. But can't find a way to work with alpha-channel in OSMF. I can't find any properties like that in VideoElement class. 

    Given that effects generally apply to a DisplayObject, it should just be a matter of getting to the VideoElement's DisplayObject and applying the effect (or passing it to an object that can apply the effect).  The simplest way to get to a VideoElement's DisplayObject is to hand it to a MediaPlayer and query MediaPlayer.displayObject.  (You can also access it through the VideoElement's DisplayObjectTrait.)

  • Why does Illustrator CS4 save pdfs with clipping paths and make rasters of gradient areas

    I am on a IMAC and upgraded to 10.6.8 Jan 2014. I am using CS4 Illustrator to create with. When i save my work as a pdf then reopen the pdf in Ill to make changes, the whole page has:
    A.) Multiple clipping paths around it
    B.) Most text has now become outlined. Not editable anymore.
    C.) Gradient areas have multiple clipping paths of the single gradient area
    D.) The gradient areas now become rasterized.
    This is very frustrating as now all of my marketing files, some 300+, are worthless. I don't know where to look anymore to find the problem.
    Please help.
    Thank you very much

    John,
    I have the presets as you have shown. I had been editing the supplied items as you suggested. Then figured i should ask the questions of those who are better than I.
    But still a bit confused as to why the new save places clipping paths around the document.
    Thank you John and Monika for your help.
    why does Illustrator CS4 save pdfs with clipping paths and make rasters of gradient areas
    created by John Mensinger in Illustrator - View the full discussion
    I do a save as "pdf" in the format pull down tab. I save to a folder on the hard drive. Where is the "Illustrator editability" check box? I presumed it is in Acrobat some where
    but i seem to be lost.
    It is in Illustrator's Save Adobe PDF dialog, which pops up before the saved file is written.
    https://forums.adobe.com/servlet/JiveServlet/downloadImage/2-6439399-644928/450-397/Untitl ed-1.jpg
    Sorry i didn't mention this, but this seems to have occurred when using images and text from provided pdfs.
    That's a critical fact. If you didn't do the original save, the above is moot, and it's too late to exercise any control over the save process. Someone else failed to save for editability. The only thing you can do is clean up/repair the content, (release clipping masks, rebuild rasterized elements, expand objects, etc.), and save correctly as AI. Then, if necessary, re-save as PDF with the correct settings.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6439399#6439399
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Illustrator by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Can I run with the watch and track distance and speed without my I phone?

    Can I run with the watch and track speed and distance without being close to my iPhone?

    You can install the portable Firefox 3.6.x version to access websites that do not work with Firefox 5+.
    *http://portableapps.com/apps/internet/firefox_portable#legacy
    *http://portableapps.com/apps/internet/firefox_portable/localization#legacy36
    *Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
    *Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html

  • Is there a way to download Firefox 4 without going on a 3rd party site? Many of my addons do not work with Firefox 5 and 6.

    Quite a few of my addons don't work with firefox 6, and I would prefer to keep them, but my pc crashed and I had to reformat. I don't want to have to go on a 3rd party site, since they could easily put a virus on my pc. I couldn't find anywhere to download it on the site.
    Thanks

    ftp://ftp.mozilla.org/pub/firefox/releases/4.0.1/
    Just keep in mind that Firefox 5.0 was a security release for 4.0.1.

  • I have recently installed Mavericks and since then I have been unable to shut down or log out of my mac.  I work with two screens and now I seem to have programmes at the top of both screens which I didn't before.  any advice?

    I have recently installed Mavericks on my desk top and since then I have been unable to switch off my computer without crashing it. I work with two screen and now I seem to have the menu bar on the second screen as well which I did not have before.  Can you please help me?

    Dr Bettina, I had similar problems with Mavericks. I installed it on a Mini and a 13" MacBook Pro. I can't speak to your disdplay issues, but I can confirm the inability to logout, shut down, or restarft without a forced, power button shut down. I can also report frequent System Prefs freezes and finder issues, like folder contents taking half a minuite or more to render, or not appearing at all. And while a few Adobe CC apps actually ran faster, InDesign ran like molasses uphill in Decemner.
    I tried uninstalling or disabling numerous 3rd party apps and pref panes. I unplugged everything but the keyboard, ran DiskWarrier, repaired permissions, did fsck -f, trashed various preference files, reinstalled the OS... You name it, and I tried it — short of a potion using eye of newt.
    After two days of totally hosed productivity, I restored OS 10.8.5 on the Mini so I could actually get some work done. However, I've decided to leave Mavericks on the MBP as a sort of crash dummy, and will install and thoroughly test all updates until stability has been achieved. Then — and only then — will I upgrade the Mini to Mavericks, even if it means waiting 'til a .2 or even .3 update.
    Good luck to you...

  • HT201210 hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

    hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

    Try the suggestions here to see if they resolve your problem:
    http://support.apple.com/kb/ts1559
    If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

  • APPLE DOCKING STATION NO LONGER WORKS WITH TOUCH 3G and 4G after ios 4.2.1

    APPLE DOCKING STATION NO LONGER WORKS WITH TOUCH 3G and 4G after ios 4.2.1 update.
    I have both of these touches. I updated both 3g and 4g to ios 4.2.1 and poof...no docking station support other than charging, no audio and no remote function. My av/cable works with the tv, and the headphone jack still outputs audio, just no auido through the Apple dock and hte remote is dead. I purchased the dock from the apple store last year and it was working with both ipod 3g and 4g grrrrr...
    Is Apple now in the bug trade business?, trade one for another....
    Anyone else have this problem?

    My iPod Touch 3G running 4.2.1 works fine with the Apple docking station.
    Perhaps you have a loose cable somewhere and/or a dead battery in your controller?

  • Why Model MD297AE/A is not working with Fcae time and Model MD293C/A is working in UAE with Facetime

    Why Model MD297AE/A is not working with Fcae time and Model MD293C/A is working in UAE with Facetime.
    In fact I have given my iPhone to my daughter to use in Canada (purchased from UAE ISP) she is unable to use Face Time within Canada. ?
    Is it possibile to activate FaceTime in Canada if iPhone is purchase from UAE.
    Purchase under Points by ISP (No contract)
    Thanks
    Abbas

    Hello sir
           I agree what u replied for the above question, but because of the UAE request, you cannot deactivate the facetime completely from this iphone, they should stop working through SIM network. The iphone is a universal mobile which can travel all over the world, many tourist people will suffer due to that, pls re-consider in taking back and try to make it upgrading this software.
    Thanks
    SATHISH KUMAR

  • I am working with Acrobat XI and when I try to add text to geopdf file I get a popup screen that says this is a secured document and editing is not permitted. How do I fix this?

    I am working with Acrobat XI and when I try to add text to a geopdf file I get a popup screen that says this is a secured document and editing is not permitted. How do I fix this?

    I figured it out...needed to use comment tool set, not the editing tool set.

  • Existing Apple ID is not longer working with Face Time and Message on the iPhone after iOS 6

    After the IOS 6 update on my iPhone the Apple ID is not longer working with Face Time and Message. Each time I try to log in I receive the message that the password or the user is not right. But they are, because on all other devices and all other parts of the iPhone (iCloud, AppStore, iTunes) they are working. Other Apple IDs are working fine.
    What's wrong? Any idea?
    Thanks

    Blue
    It sounds like you restored from an old back-up.  Did you back-up just before your software update?  It will use your last one and if your last back-up was a ywear old then it will use that one.
    In general, if you are getting these messages on your iPhones select logout (when you get that Apple Id request) and then log back in with your newer ID.
    Sorry for your losses.
    Cheers

  • Can I email photos w/o templates Iphoto provides? I used to be able to choose a few photos and email them. Now I have to work with these templates and can barely see what I'm writing!

    I used to be able to choose a few photos and email them. Now I have to work with these templates and often do no want to. Could someone tell me the process for choosing to send photos without the templates?

    Like Larry pointed out in iPhoto's General Preferences pane:
    Click to view full size
    OT

  • [svn:fx-trunk] 5019: ASDoc updates to indicate that some Halo containers do not work with the Spark equiv (ControlBar does not work with Spark Panel/ AppControlBar does not work with Spark Application), and indicate that Canvas, Box, Tile, Panel have Spa

    Revision: 5019
    Author: [email protected]
    Date: 2009-02-19 13:17:21 -0800 (Thu, 19 Feb 2009)
    Log Message:
    ASDoc updates to indicate that some Halo containers do not work with the Spark equiv (ControlBar does not work with Spark Panel/AppControlBar does not work with Spark Application), and indicate that Canvas, Box, Tile, Panel have Spark equivs
    QE Notes: None
    Doc Notes: None
    Bugs: -
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Accordion.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ApplicationControlBar.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Box.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Canvas.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ControlBar.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/HBox.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Panel.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/TabNavigator.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Tile.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/VBox.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ViewStack.as

    Hi DST
    This is a great effort and gesture. thank you on behalf of all the newbies.
    PJ

Maybe you are looking for

  • Problem Installing Sol Man 4.0 /Windows/SQL Server 2000

    Hi, Ran into the following problem when installing, any ideas: SAPinst is getting started. Please be patient ... starting gui server process:   sapinstport: 21200   guiport    : 21212   guistart   : true   command    : "C:\Program Files\Java\jre1.5.0

  • Topic: How to refer columns with same name in jdbc

    I have a join statement : Select a.col1, a.col2, b.col3, b.col2 from TABLE1 a, TABLE2 b where a.col1 = b.col1 how do I refer with same column name suppose I want to get b.col2 I get error when I try rs.getString("b.col2") or rs.getString("TABLE2.COL2

  • Frozen and lost photo's!?!?

    i just imported 200 so photo's into iPhoto but after the import i was rotating some and the program crashed, when i re-opened it the photo's i just imported were not there. As usual i had selected the option to delete the photo's from my camera after

  • Motorola V3 Razr modem connection to MacBook with Cingular / MacOS X 10.4.7

    For many this is posting information you already know. However, for some I hope this will be useful. Have just spent the best part of a day getting a V3 Razr to work as a modem. Cingular, Motorola and Apple tech support were almost equally unhelpful.

  • 5230 - massive Facebook problems

    I am tearing my hair out with Nokia Facebook apps - can anyone help?  The original app that comes with the phone worked fine for ages, then suddenly it stopped loading the news feed, freezing on a blank screen (everything lese seemed fine).  I reinst