Working with CMYK for the first time - no bright colors in CMYK?

I have a project for school and have been told to use CMYK. i've never used CMYK before and know nothing about it other than CMYK standing for Cyan Magenta Yellow Key.
is it not possible to get bright, neon-y colors (the kind of color that is in the upperright hand side of the color box, like this green for example) ? when i try to choose colors like that, photoshop chooses a darker color instead, giving me a warning sign that the one i chose is "out of gamut for printing". is there anyway around this?

It is not possible to get bright, saturated greens in CMYK. Here's a plot of the color gamut (available colors) of sRGB, the web colorspace (wireframe) compared to SWOP CMYK (the solid color area). See how in the bright greens there's a huge hole missing in the SWOP gamut.
You can work in RGB, and soft-proof CMYK (View > proof colors), converting as you save out a file for print. Don't worry too much, as most greens you see in print have this same limitation, and as long as you don't hold a neon green up for comparison, they usually look OK.

Similar Messages

I synced my 3G with itunes for the first time and lost all contacts and information on phone, help?

I synced my 3G iphone with itunes for the first time, and lost everything on my phone. how do i get it back?

You don't.
You synced your iPhone with iTunes for the first time after how long?
And this didn't happen by syncing only. This means you transferred the backup for another iPhone or you restored the iPhone with iTunes. It is not possible for everything to be lost by syncing alone. All iTunes content on your iPhone can be lost but not any photos in the Camera Roll and the same for contacts unless you synced contacts with an empty address book application on your computer.

I synced my phone with iCloud for the first time and it put ALL of my husband's contacts on my phone. How to I take contacts off my iphone and reinstall only mine?

I have archived my contacts on my computer and can reinstall only those, but I can't figure out how to wipe all of his contacts off my iphone.

You don't.
You synced your iPhone with iTunes for the first time after how long?
And this didn't happen by syncing only. This means you transferred the backup for another iPhone or you restored the iPhone with iTunes. It is not possible for everything to be lost by syncing alone. All iTunes content on your iPhone can be lost but not any photos in the Camera Roll and the same for contacts unless you synced contacts with an empty address book application on your computer.

Sync my iphone calendar with MobileMe for the first time without deleting?

I never used iCal, I only us the calendar on my iphone to remember appointments. Now I just got MobileMe and I want my iphone calendar to sync with mobileme (obviously for the first time). But when I turn on MobileMe calendar sync on my iPhone, I get the message that if I save that setting, all my events will be deleted from my phone!
How can I start using MobileMe on my phone without losing all my events/appointments??
And what's the logic behind this behavior? I don't get it.

childlost,
This is the expected behavior. When MobileMe Push is enabled on the iPhone, it replaces the existing information with what it finds on me.com.
I'd recommend following this guide for the initial setup: http://www.apple.com/mobileme/setup/iphone/mac.html
Hope this helps,
Raleigh

After syncing with icloud for the first time, all my contacts disappeared

Recently for the first time I signed up for Icloud and tried to sync contacts with it, but after this procedure all my contacts disappeared from my iphone, i treid searching online for the solution but couldnt get back my contacts, when I logged in to icloud.com, even contacts list was empty. Any help regarding this will be appreciated.

I have had a similar problem, except all of my text messages are gone too! My contacts have slowly started to come back, but it appears that my most recently added contacts are gone, and my messages are also gone still.

How do I connect to the internet with Airport for the first time?

I just got my Airport express and I've been trying to configure it to connect to the internet but it doesn't work and I can't find info on the configurations. I have an ethernet "modem" which I used to connect the cable coming from it to the computer and now I connect it to my Airport. Although the green light is on and in network preferences, it tells me I'm connected to the internet, I can't browse the internet with Safari, etc. I've been trying to find information on how to configure the base station in Airport Admin Utility but there is no specific information. Is there anyone who could help me telling me how to set up the IP adress, if I need one, DHCP, preferences in Airport Admin Utility?? If the ethernet cable is connected to the computer directly I don't need a user ID or anything... It's all setup automatically.

As a minimum, in order to gain access to the Internet with an AirPort Express base station, you will need an Internet Service Provider (ISP) AND an Internet modem or gateway device.
What is the make & model of the Internet modem or gateway device that you have the AirPort Express directly connected to by Ethernet? What exact model of Express do you have?

I increased my font with zoom for the first time & got it too large. It will not decrease using Control & minus sign.

I use Firefox 4. Windows XP. I have tremors & must have accidentally clicked on something that made it open up with weird colors like it was in safe mode. It was in 8-bit so put it back on 32-bit and 1280 x 1024 pixels. Then the font was so small it is almost unreadable. Tried to change it in Firefox Tools, Options, & Content. This did not work. I then used Zoom after checking in Help but got the font so large I can't view my email right. It will not decrease when trying Control with the minus sign as suggested.

Did you change the resolution in Control Panel > Display ?
What is the native resolution of your video display (monitor)?

Connecting a used iPhone with iTunes for the first time

When i bought my 5s end of last year i switched it on coming out of the box, without connecting it to iTunes. I started making back-ups to iCloud.
Now i want to connect it to iTunes to make a back-up, but iTunes thinks it's a new device and only proposes me either to restore an old back-up, or to start using the device "as new".
I'm afraid of losing everything chosing that last option, and the last back-up on my iMac must be one of my iPhone 4 so i wouldn't want that either.
Now how can i make a back-up with iTunes in that case?

not sure if you read what i wrote..
iTunes only proposes me to either restore an old back-up, or to start using the device "as new".
So it's not possible to click any backup button in this case

[SOLVED] Trying out scripting for the first time... confused...

ok so here is the script that I have started
echo 'This is a custom updater app written by Daniel Schneider'
echo "Check for updates now? (y/n)"
read answer
if [ "$answer" = "y" ]; then
sudo pacman -Syy
sudo pacman -Syu
read
fi
if [ "$answer" = "n" ]; then
exit
fi
but when ran, pacman reports another package manager running when that is not true. Here is the output exactly..
:: Synchronizing package databases...
error: failed to init transaction (unable to lock database)
if you're sure a package manager is not already
running, you can remove /var/lib/pacman/db.lck
:: Synchronizing package databases...
error: failed to init transaction (unable to lock database)
if you're sure a package manager is not already
running, you can remove /var/lib/pacman/db.lck
So how do I fix this bug in my script?
ps. I know this script is kinda silly just messing around with "coding" for the first time
Last edited by Dans564 (2011-03-22 20:11:31)

Not sure if this is true
but instead of
sudo pacman -Syy
sudo pacman -Syu
try
sudo pacman -Syy && sudo pacman -Syu
If I'm not mistaken the reason why is giving that error is because you are trying to do sudo pacman -Syy and sudo pacman -Syu at same time which is impossible . I think with a && first will do the first comand and only when this is over will run the second.

For the first time ever... firefox has been crashing all day... is it suddenly not compattable with my windows 7? or what is going on? which version would work best for me?

today for the first time ever... firefox will not work.. it constantly is going to not responding... and i have never had this problem before... is it suddenly not compatible with windows 7? what is best suited for windows seven users?

Drrhythm2 wrote:
What's the best solution for this? I
Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer.

I'm trying to use my iPad mini for the first time with a previous apple ID and password but it will not connect to iTunes but I can download apps from my iPhone using the same appleID and password and it works on my iphone...PLEASE HELP NOW

I'm trying to use my iPad mini for the first time with a previous apple ID and password but it says "iTunes is not working try again"...it allowed me to download an app on my iPhone using the same apple ID & password but all my apps are in "Waiting Status" on my iPad mini because it says "iTunes is not working"...PLEASE HELP ME NOW!!!

Previous user installed iOS 7 beta on that iPhone.
Take it back and get your money returned. You
are running into a new security feature. Whoever owns
the ID that it is asking for is the only person who can
remove the security. That iPhone is worthless to you.

HT4623 for the first time i bought this iPhone, i was enjoying it....i updated it with iTunes and suddenly message appear on my pc an error occurred.....n my phone is not working.... :-( what should i do?? m helpless...no support from ny side....

for the first time i bought this iPhone, i was enjoying it....i updated it with iTunes from older version to newer version and after installation when it was updating my iphone then suddenly message appear on my pc an error occurred.....n my phone is not working.... :-( what should i do?? m helpless...no support from any side....
and now its not even restoring back....showing me error's
m getting very irritated and unable to sleep jst because of all this crap....
instead i lost 1gb internet data in downloading the update

i tried restoring itz saying error occured 2008 :-(

I have just installed iTunes for the first time. When I run the application I get a "iTunes not working" message. Operating system Vista (32 bit). I have tried reinstalling with all firewalls off, but still no success. Have other people had this problem?

I have just installed iTunes for the first time. When I run the application I get a "iTunes not working" message. Operating system Vista (32 bit). I have tried reinstalling with all firewalls off, but still no success. Have other people had this problem?

Drrhythm2 wrote:
What's the best solution for this? I
Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer.

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
When Charter Tech goes to your site, have them connect the modem up, but do not connect the modem to your iMAC or MacBook Pro. What you want to do is connect the Airport Extreme to the iMac or MacBook Pro first with the Ethernet Cable. You have to do this to configure via Airport Utility to set up the Base Station Name & Base Station Password.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple Tv, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.
WHAT TO DO IF YOUR AIRPORT EXTREME WAS PREVIOUSLY SET UP FOR USE WITH ANOTHER CARRIERS ROUTER OR MODEM.
NOTE: If you already had your Airport Extreme connected for example, I previously had ATT Uverse and the Airport Extreme was connected to the Wireless Router Model 3801HGV, I disabled the Uverse Wireless and used the Airport Extreme for the Wireless signal in bridge mode, as the Airport extreme Signal is much stronger than the Uverse router, and I was able to obtain a Wireless signal with the Airport Extreme way much better with no signal loss which was very very frustrating with the Uverse router.
Anyhow if you had it hooked up like this, now that you will be using it with the Charter ARRIS Modem TM902A, you will need to reset the Airport Extreme to clear out the old data it has in memory, with the previous set up otherwise it will not work. Trust me I spent 6 hours trying to make it work reading all Apple Support Community questions and answers relating to this type issue/problem others have been having trying to get their set up working. I tried all the tips, and I finally decided just to see if by chance I would be able to connect with someone with Charter Tech support who might be familiar with Apple to be able to assist me and by luck I did. He told me why it was not working and was all due the previous configuration with the ATT Uverse router was still in memory with the Airport Extreme. Finally it was 10:30 PM when I decided to call Charter Tech Support and I had been working on this since 3:00 pm pacific. I did not call them earlier as all the post I read said they never received any good help from Charter. After calling them I finished up by 11:00 PM and was able to finally connect Apple Tv, iMac, iPhones and Macbook Pro. We love our Apple Product and Happy all is connected with the new
Internet Provider Charter. I must say the speed is way way much better than it ever was with AT&T Uverse.
THIS IS WHAT YOU WILL NEED TO DO:
First you will need to unplug the Airport Extreme, then by taking the tip of a pen or paper clip end you need to push the reset button on the back of the Airport Extreme and hold it
down and at the same time plug the power cord back into the Airport Extreme count to 5 or 10 then release the reset button. Then once he light in front of the Airport Extreme stops blinking you need to plug the Ethernet cable from the Airport Extreme to your iMAC or Macbook Pro, and restart which ever one you have, then open the Airport Utility once it is back up. If you see airport extreme pop up with the old network name or it shows and yellow triangle click on the Airport Extreme ICON it will not let you configure it but will ask if you want to get rid of it or remove and just do it. Then Again restart your iMAC or MacBook Pro, open up Airport Utility again, and on the top left you should see under “Other Airport Base Stations” the MAC ID for the Airport Extreme.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple TV, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.

I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
I have a Linksys WRT320N I used for the initial Charter setup.
I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
Hasn't caused any issues so far but one thing I did notice.
On the Linksys there were 3 DNS servers listed.
The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
I tried everything above, but light on modem still flashes yellow.
I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO.

For the first time, I'm trying to use adobe premiere elements10 that came with my pc Windows 8. I created a single project, saved it but cannot open it. My pc shows the file I created but I get an error message that says this type file is not supported or

For the first time, I'm trying to use adobe premiere elements 10 that came with my pc Windows 8. I created a single project, saved it but cannot open it. My pc shows the file I created but I get an error message that says this type file is not supported or the codex is not installed. As a test, I created another very small project and get the same error message, when I try to open it. Pls give me a simple answer, a refund or a phone

mike frischenmeyer
What computer operating system is your Premiere Elements 10 running on? And, what video card/graphics card does that computer use?
Is this the first time you are using Premiere Elements 10 or have you worked with it before successfully? There is no easy solution until we
know the details and troubleshoot to determined what caused the problem.
1. Can you open a new project?
2. After you saved/closed the problem project, did you move, delete, or rename any of the files/folder that were related to the source media
for that project?
3. Please review the Adobe document on troubleshooting damaged projects.
Troubleshoot damaged projects | Adobe Premiere Elements
4. What are the steps that you are using to reopen this saved closed project.
a. File Menu/Open Project/Name of Project
b. Other
Please review and consider and then we can decide what next based on your further details and results..
Thank you.
ATR

Working with CMYK for the first time - no bright colors in CMYK?

Similar Messages

Maybe you are looking for