Working with Confirmed and Non Confirmed Dimensions

The actual need for my situation is I have two facts F1 and F2 and Four Dimensions D1, D2, D3, D4
D1 is a confirmed Dimension
D2, D3 are joined to F1 and D4 to F2 according to the star schema . I need a report which has D1, D2, D3, D4 , F1. Is this possible ?
Method applied : I added a new logical table source to F1 and pointed it to F2. I pulled in all the required dimensions and created a new logical folder with F1, D1,D2,D3,d4 . I created a logical join from D4 to F1 in BMM layer . The rest of dimensions are already connected to F1.
Now when i run the report the i get null values when i pull in D4 and F1 which is logically correct but when i try to run the report D1,D2,D3,D4,F1 it returns an error ? Should i need to include even F2 in my report ?

I actually have an out of box RPD which has defined hierarchies only for certain dimensions. Is it a good practice to define hierarchies for all the dimensions ?
can't we establish the report D1,D2,D3,D4,F1 without the hierarchies ?
For the present RPD we have hierarchy defined only for D3 . Reports running on the present subject areas are working perfectly fine even without the hierarchies. Only when i am trying to span across different subject areas i get errors.
Could you throw more light on the difference it would make if i defined hierarchies for all the dimensions.

Similar Messages

Re: Working with Confirmed and Non Confirmed Dimensions

I want to make a report with columns from Lot_D, Lot_Grade_D dimensions and measures from Lot_Quantity_F and Stock_F facts, did the following steps but unable to get the required result
- two facts Stock_F and Lot_Quantity_F, Lot_D dimension is conformed whereas Lot_Grade_D is connected with Lot_Quantity_F only.
- made the joins on physical layer between Stock_F and Lot_D and than among Lot_Quantity_F, Lot_D and Lot_Grade_D.
- dragged all the four objects in BMM (now four BMM objects with relevant source in physical)
- created level-based hierarchies for Lot_D and Lot_Grade_D in BMM
- set the Stock_F measure column under Levels tab to Total level for Lot_Grade_D dimension
- set the Logical Level in the Content tab of Stock_F to Detail level for Lot_D dimension
- set the Logical Level in the Content tab of Lot_Quantity_F to Detail level for Lot_D and Lot_Grade_D dimensions
- dragged all the BMM objects in presentation layer
created the report based on flat dimensions (not Hierarchical dimensions)
Looking for a quick response
regards
Farooq

Follow The Below Steps
1) Add the Stcok_F and LOT_Q_F as LTS in BMM .
2) Join this LTS to both the dimensnons Lot_d and Lot_Grade_D
3)Open the Stock_F in LTS and go to Content tab.Set the Lot_Grade_d to total and Lot_d to Detail
4)Open the LOT_Q_F LTS and set the levels to detail.
5)Open the Individual columns coming from Stock_F and set the level for lot_grade_d to Detail.

Lucreate not working with ZFS and non-global zones

I replied to this thread: Re: lucreate and non-global zones as to not duplicate content, but for some reason it was locked. So I'll post here... I'm experiencing the exact same issue on my system. Below is the lucreate and zfs list output.
# lucreate -n patch20130408
Creating Live Upgrade boot environment...
Analyzing system configuration.
No name for current boot environment.
INFORMATION: The current boot environment is not named - assigning name <s10s_u10wos_17b>.
Current boot environment is named <s10s_u10wos_17b>.
Creating initial configuration for primary boot environment <s10s_u10wos_17b>.
INFORMATION: No BEs are configured on this system.
The device </dev/dsk/c1t0d0s0> is not a root device for any boot environment; cannot get BE ID.
PBE configuration successful: PBE name <s10s_u10wos_17b> PBE Boot Device </dev/dsk/c1t0d0s0>.
Updating boot environment description database on all BEs.
Updating system configuration files.
Creating configuration for boot environment <patch20130408>.
Source boot environment is <s10s_u10wos_17b>.
Creating file systems on boot environment <patch20130408>.
Populating file systems on boot environment <patch20130408>.
Temporarily mounting zones in PBE <s10s_u10wos_17b>.
Analyzing zones.
WARNING: Directory </zones/APP> zone <global> lies on a filesystem shared between BEs, remapping path to </zones/APP-patch20130408>.
WARNING: Device <tank/zones/APP> is shared between BEs, remapping to <tank/zones/APP-patch20130408>.
WARNING: Directory </zones/DB> zone <global> lies on a filesystem shared between BEs, remapping path to </zones/DB-patch20130408>.
WARNING: Device <tank/zones/DB> is shared between BEs, remapping to <tank/zones/DB-patch20130408>.
Duplicating ZFS datasets from PBE to ABE.
Creating snapshot for <rpool/ROOT/s10s_u10wos_17b> on <rpool/ROOT/s10s_u10wos_17b@patch20130408>.
Creating clone for <rpool/ROOT/s10s_u10wos_17b@patch20130408> on <rpool/ROOT/patch20130408>.
Creating snapshot for <rpool/ROOT/s10s_u10wos_17b/var> on <rpool/ROOT/s10s_u10wos_17b/var@patch20130408>.
Creating clone for <rpool/ROOT/s10s_u10wos_17b/var@patch20130408> on <rpool/ROOT/patch20130408/var>.
Creating snapshot for <tank/zones/DB> on <tank/zones/DB@patch20130408>.
Creating clone for <tank/zones/DB@patch20130408> on <tank/zones/DB-patch20130408>.
Creating snapshot for <tank/zones/APP> on <tank/zones/APP@patch20130408>.
Creating clone for <tank/zones/APP@patch20130408> on <tank/zones/APP-patch20130408>.
Mounting ABE <patch20130408>.
Generating file list.
Finalizing ABE.
Fixing zonepaths in ABE.
Unmounting ABE <patch20130408>.
Fixing properties on ZFS datasets in ABE.
Reverting state of zones in PBE <s10s_u10wos_17b>.
Making boot environment <patch20130408> bootable.
Population of boot environment <patch20130408> successful.
Creation of boot environment <patch20130408> successful.
# zfs list
NAME USED AVAIL REFER MOUNTPOINT
rpool 16.6G 257G 106K /rpool
rpool/ROOT 4.47G 257G 31K legacy
rpool/ROOT/s10s_u10wos_17b 4.34G 257G 4.23G /
rpool/ROOT/s10s_u10wos_17b@patch20130408 3.12M - 4.23G -
rpool/ROOT/s10s_u10wos_17b/var 113M 257G 112M /var
rpool/ROOT/s10s_u10wos_17b/var@patch20130408 864K - 110M -
rpool/ROOT/patch20130408 134M 257G 4.22G /.alt.patch20130408
rpool/ROOT/patch20130408/var 26.0M 257G 118M /.alt.patch20130408/var
rpool/dump 1.55G 257G 1.50G -
rpool/export 63K 257G 32K /export
rpool/export/home 31K 257G 31K /export/home
rpool/h 2.27G 257G 2.27G /h
rpool/security1 28.4M 257G 28.4M /security1
rpool/swap 8.25G 257G 8.00G -
tank 12.9G 261G 31K /tank
tank/swap 8.25G 261G 8.00G -
tank/zones 4.69G 261G 36K /zones
tank/zones/DB 1.30G 261G 1.30G /zones/DB
tank/zones/DB@patch20130408 1.75M - 1.30G -
tank/zones/DB-patch20130408 22.3M 261G 1.30G /.alt.patch20130408/zones/DB-patch20130408
tank/zones/APP 3.34G 261G 3.34G /zones/APP
tank/zones/APP@patch20130408 2.39M - 3.34G -
tank/zones/APP-patch20130408 27.3M 261G 3.33G /.alt.patch20130408/zones/APP-patch20130408

I replied to this thread: Re: lucreate and non-global zones as to not duplicate content, but for some reason it was locked. So I'll post here...The thread was locked because you were not replying to it.
You were hijacking that other person's discussion from 2012 to ask your own new post.
You have now properly asked your question and people can pay attention to you and not confuse you with that other person.

Working with NIO and non-NIO sockets

Hello,
Trying to write a network manager kind of program where the client initiates a number of connections to different servers. Need to manage these connections through the life time of the session ( time the client is connected to the server). The client connections originate from a single machine, the servers are geographically distributed and about 1 to 5 connections between each client and server.
I have tried and example NIO client/server application and it works fine. I have tried the KnockKnock client/server example it works. But when I try to use the NIO client with the multithreaded knockknock server, the socket connection goes through okay. However the data written to socket channel on the client(NIO) side doesn't seem to reach the server(non-NIO). I can't change the servers since they already exist in the field. I am just trying to write the manager application to manage them.
Basically I am trying to avoid writing a multithreaded socket connection management program.
Thanks for any input.

Not the greatest NIO code. The author seems unaware that closing a channel also cancels all its selection keys so he laboriously programs both operations every time he needs to close the channel. His discussion of OP_CONNECT makes little sense: the important point is that OP_CONNECT is only used in the connection phase and OP_WRITE is only used in the connected phase.
His code registers the channel for OP_WRITE as soon as the connection completes, when there is no pending data to write. This will just cause the selector to spin uselessly doing nothing. The channel should be registered with zero interest-ops and OP_WRITE should be registered when there is something to write, i.e. during the send() operation; and it should be deregistered when the write has completed successfully and there is no more data to write.

Dear Apple's people, please note that "Lightning to 30 pin Adapter" don't work with iPhone5 and iPhone5s "Base Dock" !!!!

Dear Apple's people, please note that "Lightning to 30 pin Adapter" don't work with iPhone5 and iPhone5s "Base Dock" !!!!

Ho comprato un adattatore originale Apple "lighitning to 30 pin adapter" per poter usare i mei vecchi cavi dell'iPhone4 con il nuovo iPhone5.
Se collego l'adattatore (con il vecchio cavo delliPhone4) direttamente all'iPhone5 , tutto funziona.
Ma se collego l'adattatore (con il vecchio cavo delliPhone4) all'iPhone5 tramite la "base dock" , l'adattatore non viene riconosciuto e non funziona.
Pensando che l'adattatore fosse rotto, ho riprovato con altri identici adattatori originali, ma il risultatato è lo stesso.
Quindi penso che potrebbe essere un errore di progettazione della base dock che supporta unicamente la connessione diretta tramite un cavo lighning e non supporta la connessione se in mezzo c'è l'adattatore !!

Internal table with Dynamic and Non dynamic fileds

Hi Experts,
How to get the internal table with Dynamic and Non-Dynamic Fields.
Could u please help me.
Thanks,
Varun

Hi,
Execute the below sample code or analyze it there is appropriate description provided.
*& Report ZTEST_PRM_DYN_ALV
REPORT ZTEST_PRM_DYN_ALV.
type-pools: slis.
field-symbols: <dyn_table> type standard table,
<dyn_wa>.
data: alv_fldcat type slis_t_fieldcat_alv,
it_fldcat type lvc_t_fcat.
selection-screen begin of block b1 with frame title text-001.
parameters: p_flds(5) type c.
selection-screen end of block b1.
start-of-selection.
*build the dynamic internal table
perform build_dyn_itab.
*write 5 records to the alv grid
do 5 times.
perform build_report.
enddo.
*call the alv grid.
perform call_alv.
*Build_dyn_itab
form build_dyn_itab.
data: new_table type ref to data,
new_line type ref to data,
wa_it_fldcat type lvc_s_fcat.
*Create fields .
clear wa_it_fldcat.
wa_it_fldcat-fieldname = 'name1'.
wa_it_fldcat-datatype = 'mara-matnr'.
wa_it_fldcat-intlen = 5.
append wa_it_fldcat to it_fldcat .
*clear wa_it_fldcat.
wa_it_fldcat-fieldname = sy-index.
wa_it_fldcat-datatype = 'CHAR'.
wa_it_fldcat-intlen = 5.
append wa_it_fldcat to it_fldcat .
do p_flds times.
clear wa_it_fldcat.
wa_it_fldcat-fieldname = sy-index.
wa_it_fldcat-datatype = 'CHAR'.
wa_it_fldcat-intlen = 6.
append wa_it_fldcat to it_fldcat .
enddo.
*Create dynamic internal table and assign to FS
call method cl_alv_table_create=>create_dynamic_table
exporting
it_fieldcatalog = it_fldcat
importing
ep_table = new_table.
assign new_table->* to <dyn_table>.
*Create dynamic work area and assign to FS
create data new_line like line of <dyn_table>.
assign new_line->* to <dyn_wa>.
endform.
*Form build_report
form build_report.
data: fieldname(20) type c.
data: fieldvalue(5) type c.
data: index(3) type c.
field-symbols: <fs1>.
do p_flds times.
index = sy-index.
*Set up fieldvalue
concatenate 'FLD' index into
fieldvalue.
condense fieldvalue no-gaps.
assign component index of structure <dyn_wa> to <fs1>.
<fs1> = fieldvalue.
enddo.
*Append to the dynamic internal table
append <dyn_wa> to <dyn_table>.
endform.
*CALL_ALV
form call_alv.
data: wa_cat like line of alv_fldcat.
*clear wa_cat.
wa_cat-fieldname = 'matnr'.
wa_cat-seltext_s = sy-index.
wa_cat-outputlen = '10'.
append wa_cat to alv_fldcat.
do p_flds times.
clear wa_cat.
wa_cat-fieldname = sy-index.
wa_cat-seltext_s = sy-index.
wa_cat-outputlen = '6'.
append wa_cat to alv_fldcat.
enddo.
*Call ABAP List Viewer (ALV)
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
it_fieldcat = alv_fldcat
tables
t_outtab = <dyn_table>.
endform.
Hope this will help, reward if found usefull.
Cheers,
Ram.

NXT Flatten to String Not Working with Clusters and Arrays

Hello,
My name is Joshua and I am from the FIRST Tech Challenge Team 4318, Green Machine. We are trying to write a program that will write to a configuration file and read it back. The idea is that we will be able to write to a config file from our computer that will be read by our autonomous program when it runs. This will define what the autonomous program does.
The easiest way to do this seems to be flattening a data structure to a string, saving it to a file, and then reading back and unflattening it. The issue is that the flatten to string and unflatten from string VIs don't seem to work with arrays and clusters on the NXT. It does work when running on the computer. We've tried arrays, clusters, clusters in arrays and arrays in clusters, none seem to work. Thinking it was something to do with reading the string from a file, we tried bypassing the file functionality, still not working. It does work with basic data types though, such as strings and numbers.
No error is thrown from what we can tell. All you get is a blank data structure out of the unflatten VI.
The program attached is a test program I've been working on to get this functionality to work. It will display the hex content of what is going into the file, coming out of the file, and then the resulting data from the unflatten string, as well as any errors that have been thrown. The data type we are using simulates what we would like to store. There is also a file length in and out counter. The out file is a little larger because the NXT write file VI adds a new line character on to the end (thus the use of the strip white space VI). This character was corrupting even basic data types saved to file.
I would like to know if there is a problem with what we are doing, or if it is simply not possible to flatten arrays on the NXT. Please ask if you have any questions about the code. Thank you in advanced!
Joshua
Attachments:
ReadableTest.vi ‏20 KB

Hi jfireball,
This is a very interesting situation. Take a look at what kbbersch said. I also urge you to post in the FTC Forums. You posted your question to the general LabVIEW forums, but by posting to the FTC Forums, you will have access to others that are using the NXT hardware.
David B.
Applications Engineer
National Instruments

User Contributed Tips, PowerBook G3 Working with Power and Battery, PB G3

*The following User Contributed Tips are located in the PowerBook G3 > Working with Power and Battery on a PowerBook G3 forum:*
None at this time.
*The following related tips are located in other areas of Apple Discussions:*
neuroanatomist - Apple notebook batteries – maintenance and troubleshooting
http://discussions.apple.com/thread.jspa?threadID=1764220
Publish date: Oct 23, 2008
See Also User Tips Library

No it hasn't. What kind of battery does it use?
The power battery is dead as well (not charging nor powering the pb)

FaceTime no longer working with Yosemite and IOS 8.1

I have used FaceTime flawlessly for some time with no issue.
After I upgraded to Yosemite on my MacBookAir and IOS8.1 on 5S and iPad air, I've had a problem connecting.
When I get a call, all the devices ring (as they should) but it will not connect on the first device I pick up on. It says connecting
but all the other devices keep ringing and finally it says I have a missed call. The connection does not happen. If I turn off
all devices except one, it will work...... do we have a bug here??

Thank you for responding to my issue. I spent the better part of two hours trying to get this to work. Bluetooth is enabled on all devices. Each computer is set in Preferences/General to allow Handoff. All computers and iPhones are on the same WiFi network. I toggled all of the major settings off and on. Rebooted each of my computers several times. I finally conceded defeat. Then my daughter asked to have a try at it. She worked on the first MBP for about thirty minutes and informed me that she had gotten continuity to work. And indeed, on her MBP late 2012 she is able to use the continuity features in both directions between her computer and her iPhone 6. But it only works with Mail and Safari. I asked how she accomplished this feat. She said she turned off "everything" on her computer and iPhone (WiFi, Bluetooth, "Allow handoff" under Preferences/General) and then rebooted both the iPhone and the computer. She then turned everything back on. This worked for her. So we tried the same thing on my MBP and iPhone 6. Now continuity works partially. Email activity is mirrored on both the MBP and the iPhone regardless of which device initiates the continuity activity. But Safari activity on the computer is mirrored on the iPhone but not in the opposite direction. There is no continuity function for Pages in either direction. The telephone connectivity works fine on all of my devices– 3 MBPs, Mac Pro, iPad Air, 2nd gen iPad and 3rd gen iPad.

Open Orders (Confirmed and Un-Confirmed)

Hello BW Gurus,
I am looking for Standard BCT that can give me True Open Order "quantities" and "Amounts". The extractor 2LIS_11_V_SCL seems to give open order qty for "Confirmed" Schedules only. I am looking to get the "Net Open Orders" based on "Planned Goods Issue Date".
Any ideas on how to achieve this?
Thanks in advance.
Srini

Hi Lily,
But these extractors comprises of all orders thus, it means open orders,confirmed and not confirmed, delivered and not delivered, and orders that are already invoiced.
In my case, we need to have an open orders report meaning confirmed and not confirmed and where invoiced orders, delivered, and etc should not be included at all.
Any idea?
Thanks
Sheila

Looking for an app that works with Mac and iPhone that will set calendar reminders of birthdays in contacts.

Looking for an app that works with Mac and iPhone that will set calendar reminders of birthdays in contacts.

Hi ron1098,
Try my application Dates to iCal. it runs on the Mac, but you can sync the calendar to your iOS device.
See more about Dates to iCal here. It is £4 shareware with a 2 week demo.
Best wishes
John M
As I sell software on my site and ask for donations, the Apple Support Communities Use Agreement requires that I state that I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Handoff not working with Yosemite and iOS 8

I have three Macbook Pros in my household. Two are mid 2012 models and the other a late 2012 model. Each is supposed to support the handoff feature of Yosemite and ios8. Everything seems to work properly between my daughter's late 2012 MBP and her iPhone 6. But on the other two MBPs in our family the continuity feature does not work on either of them. Receiving and sending calls works fine. But the continuity does not work even though all three MBPs and all three iPhone 6 are on the same wifi network.
I've tried all the suggestions that I could find. Toggling off and on the various settings on the MBPs and the iPhones.
John

Thank you for responding to my issue. I spent the better part of two hours trying to get this to work. Bluetooth is enabled on all devices. Each computer is set in Preferences/General to allow Handoff. All computers and iPhones are on the same WiFi network. I toggled all of the major settings off and on. Rebooted each of my computers several times. I finally conceded defeat. Then my daughter asked to have a try at it. She worked on the first MBP for about thirty minutes and informed me that she had gotten continuity to work. And indeed, on her MBP late 2012 she is able to use the continuity features in both directions between her computer and her iPhone 6. But it only works with Mail and Safari. I asked how she accomplished this feat. She said she turned off "everything" on her computer and iPhone (WiFi, Bluetooth, "Allow handoff" under Preferences/General) and then rebooted both the iPhone and the computer. She then turned everything back on. This worked for her. So we tried the same thing on my MBP and iPhone 6. Now continuity works partially. Email activity is mirrored on both the MBP and the iPhone regardless of which device initiates the continuity activity. But Safari activity on the computer is mirrored on the iPhone but not in the opposite direction. There is no continuity function for Pages in either direction. The telephone connectivity works fine on all of my devices– 3 MBPs, Mac Pro, iPad Air, 2nd gen iPad and 3rd gen iPad.

I like the idea of auto back-up for my new iMac, Ipad and PC Netbook, particularly if I can access all files and data stored on any device. But I have a Conceptronic router. Will Time Capsule work with this and how?

I like the idea of auto back-up for my new iMac, Ipad and PC Netbook, particularly if I can access all files and data stored on any device. But I have a Conceptronic router.
1. Will Time Capsule work with this and how?
2. Can my printer USB be plugged in and then shared between the devices?
3. Can I create a network and how?
4. What happend when a visitor logs onto my existing wireless router?
I'm new to Macs (well a returning user having started with Mac Plus!!) and not very technical. Any help / advice will be much appreciated.
Ray

The key to what you seem to want to do is to be able to get Apple's Time Capsule router to "join" the network that your Conceptronic router. I believe that works with some third-party routers, but I've never seen a list of those that work in such a configuration and I have no experience with Conceptronic equipment.
You might be better off with a Network-Attached Storage (NAS) device instead of a Time Capsule.

Two FACT Tables, Some Common and Non-Common Dimensions

Hello all, a question i am sure you have faced in the past but still wanted to get your feedback.
I have a few FACT tables and some dimensions that are shared (common dimensions). Rest of the dimensions are related to one or the other FACT tables.
What is the best way to present a view where users can pull information from both the FACT tables?
I am successful in pulling the shared (common) dimensions across BOTH FACT tables having the same grain but this view breaks down when i pull information from one Dimension that has not much to do with the other FACT.
What is the best way to present this? Should this be broken in three subject areas?
Subject Area 1 --> Some Dims --> FACT Table A
Subject Area 2 --> Some Dims --> FACT Table B
AND
Subject Area 3 --> ***Only Common Dims*** --> FACT Table A & FACT Table B?
Your feedback is always appreciated.
Regards,
Edited by: user10679130 on Oct 12, 2009 3:27 PM

Please check the forum first for similar threads/questions.
Joining two fact tables with different dimensions into single logical table
http://108obiee.blogspot.com/2009/08/joining-two-fact-tables-with-different.html
This solution keeps both fact tables in the same subject area in the single logical fact table, with common and not-common dimensions.
Regards
Goran
http://108obiee.blogspot.com

I am considering buying an iPad 3. I have an iMac with OSX 10.6.8. On the iMac I have many photos and work with iPhoto and Photoshop Elements on the computer. Can I interchange or transfer photos and other work from the iMac to the iPad? How?

I am considering buying an iPad 3. I have an iMac with OSX 10.6.8. On the iMac I have many photos and work with iPhoto and Photoshop Elements on the computer. Can I interchange or transfer photos and other work from the iMac to the iPad? How?

velma Monreal wrote:
I am considering buying an iPad 3. I have an iMac with OSX 10.6.8. On the iMac I have many photos and work with iPhoto and Photoshop Elements on the computer. Can I interchange or transfer photos and other work from the iMac to the iPad? How?
Yes you can. In iPhoto create a Album with the photos you want in it. You can drag them from your Events folder. In iTunes with your iPad connected go to Photos by cliking on your iPad. You can then select the album or events you want.

Working with Confirmed and Non Confirmed Dimensions

Similar Messages

Maybe you are looking for