Working With Folders

Is there anyway to open a folder in the arrange and have it stay open when changing screensets? Everytime I switch back to the screenset that had the open folder, the folder is closed. Thanks.
-Ben

If you lock the screenset with the folder open, it will be open when you switch back to it.

Similar Messages

Is Working with Folders in EASY DMS only

Hi DMS Gurus,
1) Is Working with Folder a Special feature of Easy DMS and not much use if we donu2019t go for specifically working with Easy DMS,
2) Can Easy DMS and Normal DMS work simutaniously, ie.. can both be implemented simultaneously and used parallely when and where each ones need is raised.
3) What r the limitations of going with EASY DMS as compared to normal DMS,
like Working with Folders can be configured with normal DMS implementations also?
Thanks in Advance,
Kumar

Hi Kumar,
Easy DMS is an external software which can be installed.
In Easy DMS working/managing with the folders is the great facility which is not overall possible in standard DMS.
Easy DMS fetches the backend configuration done in standard SAP. Depending upon the user's comfortability Easy DMS is used,if user is not comfortable with the standard sap screen then he can use Easy DMS where all functions like standard DMS can be used.
Maintaining folders is a option for which Easy DMS is used very regularly.
Configurations watever done once in standard DMS is applicable for both standard DMS and Easy DMS.
In Easy DMS particular authorizations can be provided for particular folders.
Thank You,
Manoj
Pl. reward if useful.

Working with folders Folders

Can anyone help me????? I work with folders in logic 7.2.3 for example I have my drums in a folder, vocs in a folder, as well as guitars and other instruments. The problem occurs when I record say vocals, because after the recording stops logic jumps out of the folder meaning I always have to double click the folder to get back to the recording that was made. I think it's a setup problem because in older versions of I had no problems. Everything else works fine. Help!!!!!!

What's the best method for moving all my nonsystem related stuff over to this new driveIan has provided you with the best solution, SuperDuper.
But if you have a 250 GB external, you really ought to clone your entire system,(only about 3 GB) so you have a backup.
I keep mine with a complete clone of my internal, that way it is easy to boot from the external and run utilities like Disk Utility, TechToolPro, DiskWarrior, etc. on the internal and vice versa.
If you run into a problem with say Preferences and don't know which one is the troublemaker, just trash the whole pref folder and use the good one from the clone. Font problem, same deal. And, if diaster ever strikes, you can just boot up from your external and keep right on working - fix the internal when you have time.
That's my 2 cents anyway
-mj
[email protected]

Working with Folders and Sub-Folders

I'm updating this big site, and its pages are organized into
folders. I've only ever organized my images and .pdf files with
folders not my html files but all my prior sites have never had so
many files as this one. It’s starting to drive me crazy
though because pages in folders aren't connecting to scripts in the
scripts folder, menus aren't working right because of it and I'm
not sure what I can do to fix it.
My question is if images are showing up in these sub-pages,
the linked css is being applied in these sub-pages why are the
scripts not working in the sub-pages? For example, all the top
level pages easily connect to the rotating JavaScript banner, but
as soon as you go into a sub-folder page the banner disappears. All
these files are being updated via templates so any changes I'm
doing is affecting all the pages the same. That’s why
it’s confusing me why an image would connect the same but a
script wouldn't. Don't they search for their links root down or
does it search the folder its in down? How can you get templates to
work under such conditions where files are both in the root and in
folders and sub-folders?
Site reference is:
http://golfforkids.net/focus/index.html
Please note that this is a temporary domain for testing. The
top menu will pop up a window saying that it needs to be
registered. They are, just not to that domain and I don't have
access to the native domain. Sorry for the inconvenience!
Thank you for any clarification!!!

''"Are you subscribed to those subfolders?
File (Alt-F) - Subscribe"''
Please see #2 in original post:
''"2) Trying to Subscribe to folders only shows Inbox, not sub-folders for Inbox."''
Attached is an image illustrating this (this screenshot was taken after forcing Thunderbird to show Inbox folders as described in #3 of OP)
{In OP I was unable to attach images}

Working with folders and save metadata to file compatability.

when i edit in developer within lightroom, then move from the 'previous import' list to the folders which hold different projects by dragging them into the folders i have imported from the hard disk, it saves only the original files, and not my new edits.
do i have to batch export everything i edit in lightroom to be able to use it in non adobe applications??
i tried save metadata to file for these images, and then in finder they are no longer available for quickview (spacebar or command y) and finder quits. futhermore when these files, with the updated metadata, are dropped into an iwork file, they are not recognised as jpeg's anymore. but do work in photoshop, and i assume other adobe applications because the embedded metadata was designed to be compatible with adobe.
how can i have the 'develop' editing i am doing in lightroom transfer to the folders i want to have these images saved in without laboriously exporting them and having saved each image twice? does lightroom have a way i can do this?

If you're largely preparing images for the web, you simply export a batch from LR at the appropriate size and quality, in sRGB space, with or without metadata as you choose. Nothing laborious about it.
Are you starting with JPEGs or RAW images?
The bug in Leopard is known, but you also cannot expect the Finder to show what edits you have made in LR until the images are rendered out, as they are in an Export.

Working with folders and iTunes

Trying to solve the problem that I can't use iTunes to manage my mp3 library because I've got other hardware and apps that use it. So I've got to do it manually...which then leads to iTunes being out of sync.
The mp3's are on my NAS device.
I've gotten so far with an AppleScript to do it but it falls over on a folder with an '&' in the name.
I'm fairly sure its related to posix and properly referencing the folder.
Any guides or tutorials on writing scripts that use network folders?

-- iTunes Folder Sync.applescript
-- iTunes Folder Sync
-- Created by Chris Beach on 28/06/2006.
-- Copyright 2006 All rights reserved.
-- addToLib v 1.1 - An AppleScipt application that adds all files in a given folder to the
-- iTunes Music Library and then (optionally) deletes the files from the source folder
-- Modified from the Add to iTunes Library Desktop Droplet Script by Apple Computer, Inc.
-- Copyright 2004 Ken Barnt <[email protected]>
-- Change Log
-- v 1.0 - original release
-- v 1.1 - fixed bug where sub directories would not be recursed
-- - added support for AAC and Protected AAC files
-- This software is distributed under the Apple Public Source Licence
property myFiletypes : {".mp3", ".aiff", ".aac", ".wav", ".mov"}
global counter, playlist_status, this_playlist
on run
-- set the following variable to the path to the folder whose contents
-- you want to add to the iTunes Music Library
set temp_folder to "MEDIA:Music"
display dialog "Import Folder is: " & temp_folder & " Continue?" buttons {"Cancel", "Ok"} default button 2 with icon 2
if the button returned of the result is "ok" then
processfolder(tempfolder)
--display dialog counter & " items added!"
end if
end run
-- this sub-routine processes folders
on processfolder(thisfolder)
display alert POSIX path of this_folder
set this_folder to the POSIX path of this_folder
set these_items to list folder this_folder without invisibles
repeat with i from 1 to the count of these_items
-- try
set myItem to ((this_folder as string) & ":" & (item i of these_items) as alias)
tell application "Finder" to set IsFolder to (kind of myItem = "Folder")
if IsFolder is true then
processfolder(thisfolder & ":" & (item i of these_items))
else
--check extension
tell application "Finder" to set myExtension to "." & (name extension of myItem) as string
if myFiletypes contains myExtension then
set this_item to myItem as alias
--display alert (myItem as string)
--processitem(thisitem, (path to myItem) as string)
end if
end if
-- end try
end repeat
end process_folder
-- this sub-routine processes files
on processitem(thisitem, item_folder)
try
tell application "iTunes"
launch
set this_track to add this_item to playlist "Library" of source "Library"
if "_Compilations" is in item_folder then set this_track's category to "Compilation"
if "_SoundTracks" is in item_folder then set this_track's category to "Soundtrack"
if "_Classical" is in item_folder then set this_tracks's category to "Classical"
if "_Games" is in item_folder then set this_track's category to "Game"
if "_Singles" is in item_folder then set this_tracks's category to "Single"
if the playlist_status is "OK" then
duplicate this_track to this_playlist
end if
end tell
set counter to counter + 1
end try
end process_item
you can see where i've been playing with posix!

How to work with files in folders on Application/Presentation Server

Hi,
I am working on interface program in which files are populated in folders in application/presentation server in the format 'ABCsy-datumsy-uzeit.txt'(e.g.ABC20051022161450.txt,ABC20051022161455.txt ) in directory c:\temp.
I want to sort all these files and read in sorted manner.
can anybody help me out in this.
waiting for reply.
thanks & regards,
Nitin

Hi,
This logic will work for files on presentation server,
DATA: l_count TYPE i,
       l_filename TYPE string,
       t_files TYPE string OCCURS 0 WITH HEADER LINE,
       BEGIN OF t_files_sorted OCCURS 0,
         file_prefix(3),
         file_date LIKE sy-datum,
         file_time LIKE sy-uzeit,
         file_extension(4),
       END OF t_files_sorted,
       t_text TYPE TABLE OF w3html.
CALL METHOD cl_gui_frontend_services=>directory_list_files
EXPORTING
    directory                   = 'C:\Temp'
    FILTER                      = '*.txt'
     files_only                  = 'X'
   DIRECTORIES_ONLY            =
CHANGING
    file_table                  = t_files[]
    count                       = l_count
EXCEPTIONS
    cntl_error                  = 1
    directory_list_files_failed = 2
    wrong_parameter             = 3
    error_no_gui                = 4
    OTHERS                      = 5.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
           WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT t_files.
t_files_sorted = t_files.
APPEND t_files_sorted.
ENDLOOP.
SORT t_files_sorted BY file_date file_time.
LOOP AT t_files_sorted.
CONCATENATE 'C:\Temp\' t_files_sorted INTO l_filename.
CALL METHOD cl_gui_frontend_services=>gui_upload
    EXPORTING
      filename                = l_filename
     FILETYPE                = 'ASC'
     HAS_FIELD_SEPARATOR     = SPACE
     HEADER_LENGTH           = 0
   IMPORTING
     FILELENGTH              =
     HEADER                  =
    changing
      data_tab                = t_text[]
    EXCEPTIONS
      FILE_OPEN_ERROR         = 1
      FILE_READ_ERROR         = 2
      NO_BATCH                = 3
      GUI_REFUSE_FILETRANSFER = 4
      INVALID_TYPE            = 5
      NO_AUTHORITY            = 6
      UNKNOWN_ERROR           = 7
      BAD_DATA_FORMAT         = 8
      HEADER_NOT_ALLOWED      = 9
      SEPARATOR_NOT_ALLOWED   = 10
      HEADER_TOO_LONG         = 11
      UNKNOWN_DP_ERROR        = 12
      ACCESS_DENIED           = 13
      DP_OUT_OF_MEMORY        = 14
      DISK_FULL               = 15
      DP_TIMEOUT              = 16
      others                  = 17.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*****Your processing here..
ENDLOOP.
Also, use the FM that MAX has if you have to work with files on application server by replacing code in the above logic at appropriate places, like replace
cl_gui_frontend_services=>directory_list_files
with the corresponding fm
and replace cl_gui_frontend_services=>gui_upload
with OPEN DATASET...
     CLOSE DATASET...
logic.
Hope this helps..
Sri
Message was edited by: Srikanth Pinnamaneni

Cannot print "working with files and folders htm

When I try to print "Working with files-and-folders" from a Google search, it only prints part of it. I have changed my destination folder to no avail. Thank you or any help, Jack Menendez

What's the best method for moving all my nonsystem related stuff over to this new driveIan has provided you with the best solution, SuperDuper.
But if you have a 250 GB external, you really ought to clone your entire system,(only about 3 GB) so you have a backup.
I keep mine with a complete clone of my internal, that way it is easy to boot from the external and run utilities like Disk Utility, TechToolPro, DiskWarrior, etc. on the internal and vice versa.
If you run into a problem with say Preferences and don't know which one is the troublemaker, just trash the whole pref folder and use the good one from the clone. Font problem, same deal. And, if diaster ever strikes, you can just boot up from your external and keep right on working - fix the internal when you have time.
That's my 2 cents anyway
-mj
[email protected]

Mistakenly opened all the folders in my library of music and the Finder stopped working. Now every time I restart the mac, all folders are reopened and can not work with the finder and tried killall-KILL Finder and nothing they reappear

mistakenly opened all the folders in my library of music and the Finder stopped working.
Now every time I restart the mac, all folders are reopened and can not work with the finder and tried killall-KILL Finder and nothing will reappear

mistakenly opened all the folders in my library of music and the Finder stopped working.
Now every time I restart the mac, all folders are reopened and can not work with the finder and tried killall-KILL Finder and nothing will reappear

Playlists with folders - doesn't work

Brandnew iPod 30 GB, 5.5
Do have playlists with folders on iTunes 7.0.2. Folders don't appear on the iPod. Only the files in the folders. So i get a long long list of playlists on the iPod. Instead of a list with several folders in it for better overview.
Any hints? Thank you.
PowerBook G4 Mac OS X (10.3.9)

But why?
You could do it in the past.
Software bug? Will there be a fix in the future?
PowerBook G4 Mac OS X (10.3.9)

Does simple file and folder sharing on an iMac work with OSX Server?

Hi There
I wonder if I should install OSX Server on an iMac wher several users work on the same files and folders.
My question - before I do something I might regret:
Does simple file and folder sharing on an iMac within several users really work with the help of OSX Server?
All I want to be able to do:
Admin creates a new folder1 and gives it read- and write access for user1 and user2.
User1 creates a subfolder1 in folder1, and a document1 in subfolder1.
User2 edits document1. Later Admin edits document1.
All these simple editing of files and folders (and subfolders) within a main folder should be possible. This is not possible now.
Is everything clear? I'm not a network specialist or something, I just want to give some co-workers access to some data on my computer without problems.

So what you need are recursive permissions.
I suggest you create a group and add user1 and user2 to that group. You can name that group whatever you want, but for now i will call it FSUsers
Execute this in terminal. Replace FSUsers with your new group
sudo chmod -R +a "FSUsers allow list,add_file,search,add_subdirectory,delete_child,readattr,writeattr,readextat tr,writeextattr,readsecurity,file_inherit,directory_inherit" /Users/Shared/*
Replace /Users/Shared with the location of your shared folder. Make sure you keep the /* at the end (this allows all subfolders and files to get the same permissions.
If you need to add people to the share just add them to the FSUsers group, the FSUsers group should should also be allowed in the sharing preferences.

Problem Working With Framemaker 9 Dita XML Files in Framemaker 10

I just upgraded to Framemaker 10. I am encountering a number of problems when I try to work with my Dita XML help topics, which were last saved in Framemaker 9 format.
1. Using the Default Dita Template
When I open one of my documents in Framemaker 10, the Dita 1.2 template ditabase.fm is automatically applied. Everything seems fine. But then when I convert the XML to Eclipse help (which is essentially html, so we're going from XML to HTML) using Dita Open Toolkit ant scripts, I see this message:
[pipeline] [DOTJ013E][ERROR] Failed to parse the referenced file 'html\c_licensing.xml' due to below exception. Please correct the reference base on the exception message.
[pipeline] c_licensing.xml Line 25:Attribute "xmlns:ditaarch" must be declared for element type "dita".
I then opened the xml file in a text editor, and I saw this on line 25:
<dita xmlns:ditaarch = "http://dita.oasis-open.org/architecture/2005/">
Line 25 looks fine to me. Am I missing something?
2. Switching to a 1.1 Dita Template
I tried to work around the above problem. In Framemaker, I tried to set a different structured application as the default one. I closed all files and chose the default Dita 1.1 structured application (it defaults to the Dita 1.1. Composite app.)
Then I tried to open my file: I got this message inside Framemaker:
"Validation of XML failed. Continue?
Error at [FILE PATH], line 25, char 72, Message: Attribute '{http://www.w3.org/2000/xmlns/}ditaarch' is not declared for element 'dita'
Sounds familiar, doesn't it?
I switched from the default Dita 1.1. Composite structured application to the Dita 1.1. Topic structured application. Then I dirtied the source file and saved it. The messages I got in FrameMaker log window included the one above, plus I got a variety of Unknown Element messages, things like this:
Unknown element dita,
unknown element concept,
various attributes are not declared for concept,
unknown element conbody.
If I switch back to the Dita 1.1 Composite application all of these messages diappear except for this one:
Attribute '{http://www.w3.org/2000/xmlns/}ditaarch' is not declared for element 'dita'
My ant conversion scripts from the Dita Open Toolkit are still unable to process this file. They give the same message as is listed in (1) above and the file is not converted to HTML.
Can anyone help me with this problem? I've also posted this question to the Dita Users Group on Yahoo Groups. If I get an answer in one place, I'll post it in the other.
Thanks,
Nina P.

I really appreciate all the help you are providing with this, Scott. I tried your latest suggestions. Here's what happened:
Application Mappings:
I figured out how to add my "BigPage" structured application to the Applications Mappings dialog. I made a new "BigPage" mapping type, then figured out the non-intuitive part: how to add my individual BigPage topic types to it. I closed and reopened FrameMaker opened my test document, and, as before (before I did the application mappings) I saw my BigPage applications listed in the Structure Tools > Set Structured Application drop-down. I selected the appropriate application (in this case it was DITA1.1-BigPage-Reference-FM and clicked the "Set" button.
It is at this point in Framemaker 9 (and also once, in FrameMaker 10, early in this process, but I haven't been able to replicate it since) that the page size would change to tabloid size, indicating that the document was using the template from the BigPage reference structured application, not the regular DITA1.1 reference application. But this did not happen.
I tried saving the document, closing it, and reopening it. Once again the default structured application assigned to that document was "reset" to DITA1.1-Reference-FM. But the fact that the page size did not immediate refresh to tabloid size told me that although I did select the BigPage application in the drop-down, it wasn't being applied.
Public IDs:
The public ID in my test reference XML file is: <!DOCTYPE reference PUBLIC "-//OASIS//DTD DITA Reference//EN" "reference.dtd" [
The four public IDs in the DITA1.1-BigPage-Reference-FM entry in structapps.fm (in the Entity Locations section) are:
-//OASIS//DTD DITA Reference//EN
-//IBM//DTD DITA Reference//EN
-//OASIS//DTD DITA Composite//EN
-//IBM//DTD DITA Composite//EN
Do you see anything wrong with the above? .
Directory Structure:
Maybe I cloned the application incorrectly? Here's what I did:
1. In C:\Program Files (x86)\Adobe\AdobeFrameMaker10\Structure\xml, I copied the folder called DITA and pasted it into the same directory. I renamed this folder DITA-BigPage
2. Inside DITA-BigPage, I opened the app folder. Inside each subfolder in app, DITA-Reference-FM, for example, I opened the edd file in Framemaker. In this case, the edd file name was reference.edd.fm.
3. I edited the top line of reference.edd.fm. It originally said:
Structured Application: DITA1.1-Reference-FM.
I changed it to say:
Structured Application: DITA1.1-BigPage-Reference-FM
4. I saved the EDD file. Then I opened the template file in the same folder. It was called: reference.template.fm.
5. In reference.template.fm, I first changed my page size: Format Menu > Page Layout > Page Size > Tabloid > Set.
6. Then I imported the element definitions from the corresponding EDD file: File > Import > Element Definitions > reference.edd.fm > Click Import > Click OK to dismiss verification message.
7. I repeated the above process for all topic-type folders. For the maps types, I did not change the page size, as these will never display as topics in my online help. I did nothing to the dtd folder.
8. Once all this was done, I opened structapps.fm. I did the following to all Dita1.1 elements in the structure tree.
Selected the Dita 1.1 XMLApplication element, for instance, the one named Dita1.1-Reference-FM, copied it, and pasted it underneath the original element.
The original first few lines in the clone looked like this:
Application Name: DITA1.1-Reference-FM
      Template:              $STRUCTDIR\xml\DITA\app\DITA-Reference-FM\reference.template.fm
      DTD:                       $STRUCTDIR\xml\DITA\app\dtd\reference.dtd
      Read/write Rules: $STRUCTDIR\xml\DITA\app\DITA-Reference-FM\reference.rules.fm
      DOCTYPE:              reference
I changed these lines to look like this, using your suggestion to create a variable for the first part of the URLs to enable speed and accuracy:
       Application Name:      DITA1.1-BigPage-Reference-FM
               Template:                    $STRUCTDIR\xml\DITA-BigPage\app\DITA-Reference-FM\reference.template.fm
               DTD:                            $STRUCTDIR\xml\DITA-BigPage\app\dtd\reference.dtd
               Read/write Rules:        $STRUCTDIR\xml\DITA-BigPage\app\DITA-Reference-FM\reference.rules.fm
               DOCTYPE:                    reference
I also changed the "Filename" URLs in the "Entity Locations" section of this XMLApplication clone from $STRUCTDIR\xml\DITA\app\ to $STRUCTDIR\xml\DITA-BigPage\app\. Applying the "BigPage" variable I'd created for this purpose made this go quickly.
Finally, after this didn't work the first few times I tried it, I got suspicious that the structapps.fm file in my AppData folder (in my case, it was in the Roaming subfolder under the usual Adobe directories) was overriding the modified structapps.fm file in the Framemaker program directory so I replaced the one in AppData (it had all the original settings) with my modified version. This had no effect, unfortunately.
That was my process. After doing the above, the Dita1.1-BigPage applications all listed in the Set Structured App drop-down. They just didn't work,when applied to my XML documents. Nor did the application "remember" what structured application I had set when I opened a new xml document or closed/reopened the current document or closed/reopened the application. Did I place the directories correctly for Framemaker 10? This is the way I did it for FrameMaker 9 and it worked successfully.
As much as I'd love to solve this mystery, I've thought of a workaround I can fall back on that doesn't involve using a cloned application. I will change the page size of a few of the original Dita1.1 sturctured application templates to tabloid size, but leave the Topic structured application at letter size. I'll then apply the Topic structured application to my PDFs and use the others for my help topics. I'll set this up now. If this doesn't work, then I'll know there's a much bigger problem at the base of this, perhaps even something to do with changing page sizes in templates.

How to Create a Dynamic http address that opens the Explorer Window for a List Item When a Button Is Clicked--Currently Trying to Make this Work with Javascript

I have created a button (via Content Editor) that uses JavaScript to open the Attachments folder of a list item in the Explorer Window in SharePoint 2010. The purpose is to have drag and drop functionality for each list item, having multiple attachments.
The button works but opens the "Attachments" folder containing all of the other folders for each list item (one folder per item). It seems that when you add an attachment to a list item, SharePoint numbers the folder based on the item's ID. What
I'm trying to do is take the JavaScript I have and have it run when a button is clicked in a custom form. When it runs, I'm trying to get it to open the "specific" folder for the list item. I have had success creating a hyperlink in the list that
does this; however, the link WILL NOT work until I use the Content Editor created button that runs JavaScript, that prompts me to click OK to my profile certificate, and then opens the Attachment folder. After that occurs, I can use my hyperlinks without issue
because I'm no longer prompted to click OK for my cert.
So I'm trying to take the JavaScript I have and place it in a list item form (custom form) and have it run when a form button is clicked. The problem is I have very little knowledge of JavaScript (did I mention little?) and
"don't know how to take the "http:" address I have in the script and append to it the list item ID, according to the record I have open."
So that for any record I open, the script will grab the corresponding record ID (or list item ID) and append it.
Here's the script I'm working with (which I didn't create but am grateful for):
<style>
.httpFolder {behavior:url(#default#httpFolder);}
</style>
<script text = "javascript">
function fnOpenFolderView(){
oDAV.navigateFrame("https://server/collection/site/subsite/Lists/Sublist/Attachments","_self");
</script>
<div id = "oDAV" class = "httpFolder"/>
<input type = "button" value = "Open Attachment Folder" onclick = "fnOpenFolderView()"/>
The above script, in the Content Editor, creates a button that opens the Attachments folder for the corresponding SharePoint list.
JackSki123

Hello Thriggle,
Thank you for pointing that out. I appended your "GetUrlKeyValue" to the end and it worked. That said, I noticed it doesn't run as smoothly as when I simply click on the Content Editor button I created that resides on the SharePoint List
ASPX page (not the form). The Content Editor button has the same code, minus the "GetUrlKeyValue". I click it; I get prompted to choose my cert; it opens right up.
Now go to the ASPX Display form where I dump the code in a table cell. Button appears in cell; I click it; wait; wait; I get prompted for cert; it opens. Do I need some sort of "throttle" for the JavaScript? For instance, I thought before running
JavaScript, you reference the library first. This code doesn't do that. I'm wondering if there's something more I need to make this run smoothly. Thank you both for getting me this far.
JackSki123

Is there a way to make Silverkeeper work with Snow Leopard?

I use a computer "given" to me by my school. I do have administrative privileges, but IT installs all OS software and configures it per the network on campus. Last February, they installed Snow Leopard and I began to restore all my files from my external backup. I'd been using Silverkeeper for years, I prefer the way it works (basically, it copies all files, then, with subsequent backups, can be set to only update changed files and add new files into the backup. In other words, there is only one folder. As a designer, I have the "v1,v2" so deeply ingrained in me that I never loose the early versions of documents). In short, Silverkeeper works for me. Time Machine is an interface that does not.
So, IT installed Snow Leopard, I bring my machine home, and start bringing files over. For every single file, I had to type in my password. The drive, every folder and every document was suddenly marked as "Read Only". I tried changing permissions. Didn't stick. I repaired permissions, tried changing, still wouldn't take. I contacted IT, one of the guys opened Terminal and typed in something (he never gave me the line of code, so I can't tell you what he did. I asked him what he did, he just said, "It's ok, I just gave you full permission. Don't sweat it." I got home, tried to bring over some files, and they still asked for my password. Nothing had changed. Except that the machine started sending urgent error messages. I disconnected my hard drive, rebooted, and could not get past the grey screen.
Even longer story short, IT wiped my computer, reinstalled SL, I brought in my hard drives, they worked with them to have them all "Read Write" again, and said I had to use Time Machine as a backup. They blamed the entire mess on Silverkeeper.
So, the semester went on, I've been using TIme Machine ever since and I hate it. Hate it. I want my Silverkeeper, or some other such backup that gives me one file, and all my records kept in that file, in a visual manner. I hate these dates, with the multiple folders, and the threat that it will throw away old files (I just resurrected a file from a Quark doc made in 1994!). But IT has me too afraid to use Silverkeeper. Personally, I think something went wrong with the first install, then IT screwed it up even more by opening up Terminal and "fixing" the code, and they refuse to admit they have ever made a mistake. BTW, I've been using Macs for 22 years and have never experienced anything like this. I have done more system upgrades myself than I can remember, I have troubleshooted my own machines for years, and kept them humming beautifully.
It's summer, and I want a different backup. Please help, or let me know if I dare brave my old favorite once again. If there is a utility that I have to buy, I will. I'm so fed up and frustrated with the interface on Time Machine, I'm ready to go back to the bad old days of manual backups.

Are you using the latest version of Silverkeeper? - v.2.0.2 is stated to be compatible with Snow Leopard.
http://www.lacie.com/silverkeeper/
If it's messing things up you could try asking LaCie Support for assistance.

Looking for a voice memo app with folders

Looking for a voice memo app with folders
I'm trying to find a simple voice memos app that allows me to save the voice memos in folders right on the phone, and have them backed up to my desktop when I sync. I used to use Recorder Pro by Bear-Software but it doesn't work properly anymore. It was great when it worked. Why do so many of the voice memo apps just keep your voice memos in one huge long unorganized list? I need to be able to create 10 or 15 folders within the app, and save each voice memo to a specific folder. Any voice memo apps come to mind?

received this repsposne from the folks at Imesart:
Dear Andrew,
No app on iOS will let you add files to the music library. The only way to do this is to use iTunes on a computer.
Regards,
The Imesart Team

Working With Folders

Similar Messages

Maybe you are looking for