Working with footage exported from After Effects

Hello!
I'm using after effects because i'm more familiar with it and i don't want to relearn a visual effects software right now, so hopefully some of you might be familiar with it.
I compiled my video using a NTSC DV Widescreen composition. I exported out of the render queue. When i play from the finder the video is in the widescreen format i exported with.
However when i import to Final Cut Express, instead of automatically adjusting to the format of the clip (which is a .mov) it gives me the red render bar. Additionally, it squashes the widescreen into standard format, which remains when exported.
I need to keep this video in the widescreen format. Does anyone have any idea on how i could do this? Thanks!

According to Final Cut,
The clips are: Frame Rate- 29.97
frame size- 720x480
compressor - animation
data rate - 20 mb/s
field dominance - lower (even)
Pixel Aspect - NTSC - CCIR 601
The sequence im trying to edit them in (the default fcp gave me when opened)
Everything is the same accept the compressor is DV/DVCPRO - NTSC

Similar Messages

Exporting from After Effects (field dominance issues?)

Hi all,
I created a FCP DV/NTSC sequence with field dominance set to none (I'm working with still images, this improves the quality a lot). I then export that sequence as a quicktime movie file and import that movie file into After Effects.
The problem is after I'm done working in After Effects, I can't export a quicktime file without it looking really poor quality. When exporting, I preserve all the original FCP sequence settings, except the field dominance settings(doesn't seem to be an option in After Effects for this?).
So pretty much I am trying to get a sharp picture when exporting in After Effects, so I can take it back into FCP. Please assist.

Your workflow is quite limited by the DV NTSC sequence. If your sequence is all stills, you are not necessarily tied to that setting at all. Do you need to output to a VTR via FireWire ultimately? What is your final output?
A better sequence choice might be DV50. You would export a QT movie, current settings. You don't actually export from After Effects. You render by adding your comp to the Render Queue. Good render settings would be DV50 (this would not require rendering in FCP), Animation, or perhaps ProRes 422 HQ if you have access to it. You would choose not to render fields.
If it's all stills, it would be better yet to simply start in After Effects.

Exporting from After Effects to Final Cut Pro

Hi
Could anybody tell me the best way to export from After Effects, back in to Final Cut Pro? Do I need to get Automatic Duck for this, if so which one?
Thanks for any help!
Matt

You need to add your composition to the render cue and then export to the same format and codec that you're using in FCP. Automatic Duck is a great tool for getting your FCP or Motion timelines into After Effects but most of the time I simply select a clip in FCP, export it as a reference movie, bring it into AE for processing, then render a file to use as a replacement in FCP.
Search for After Effects Final Cut Workflow and you'll find some more tips including this one. It isn't bad for organization but it misses the point of using the same codec. All my FCP projects are ProRez HQ or ProREZ 444 so that's my choice. Also, if you use the entire shot, which is not a bad idea, then you can use the replace footage option in FCP which is more efficient than the demoed technique of dragging your rendered shot into the timeline and then trimming if needed.
Hope this helps.

Working with Adobe Premiere and After Effects

I want to work with Adobe Premiere and After Effects in terms of text and I do not see the Temple in Composition sttings
Please help me!!!!

Google is your friend
Here is a "tample"
https://www.google.co.nz/search?q=Tample&oq=Tample&aqs=chrome..69i57&sourceid=chrome&es_sm =122&ie=UTF-8

Sound problem with exporting from After Effects

Hello everybody,
I exported a windows media video from premiere cs5 (it was shot with the cannon 7d).
The video has 1 video channel, 1 audio channel that contains a conversation, and another audio channel that contains only music.
After I exported it, I imported the video into After Effects cs5, I added some effects, and then I exported it as a windows media video.
The audio settings were:
Mode- music
codec- windows meida audio voice 9
audio format- 20kbps, 22.05 khz, mono
Even though the video from Premiere was flawless, the one from After Effects contains the conversation perfectly, but the music is very low and even erratic.
Did anybody experienced this problem?

AE doesn't deal with multiple channels. It always assumes that a file with 2 channels is stereo. You need to export the audio from Premiere separately or create a proper stereo mix, not throw two interleaved mono channels at AE...
Mylenium

Want ProRes export from After Effects. Bad Quality. What possibilities do I have?

Hey guys,
I've got a question...
I'm working on a project in After Effects and want to export it now as a quicktime movie with prores.
The movie I get, has got a bad quality and seems blurred.
I can export as animation but is there another possibility?
Need more information? Please ask!
Best regards
MumpitzOne

Did you mean to ask this on the Premiere Pro forum? Your post mentions After Effects. Are you looking for a solution using Premiere Pro or After Effects?
Also, when asking about poor quality, it's best to post an example (such as a screenshot) so that we can see what you're referring to.
It also helps if you give details about what version of the applicaiton you're using, what operating system, and so on.

16:9 video sides cut off when exported from After Effects

When I export a 16:9 video from After Effects, the sides are cut off in the exported clip. I've tried different export settings and and my composition settings are correct, from what I can tell. Does anyone know why this could be happening?
Thanks!

and my composition settings are correct, from what I can tell.
But are they really? We cannot know, because you don't say anything about your exact render settings and comp settings, which is what is required here. You could be using an unsuitable CoDec or even crop your output inadvertently by using a specific output module setting....
Mylenium

Total PC freeze when exporting from After Effects CC

Hi guys,
I'm having quite a serious problem exporting AFX files (via Media Encoder CC) and also occationaly during RAM previews.
The problem itself is fairly simple. After a varying amount of time my PC will completely freeze and become totally unresponsive. This always seems to happen on more complex scenes involving raytracing, or C4D Lite layers and sometimes just generally complex compositions. I'm forced to restart my computer losing all render progress and any unsaved progress. A couple of times the crashes have totally messed up my AFX, corrupting any open saves and corrrupting my custom panel layouts (very annoying).
I recently upgraded my PC to a fairly beefy spec primarily to cope with complex projects like these. Here are the specs from DxDiag:
System Information
Time of this report: 8/8/2013, 15:08:15
Machine name: ALPHA-ONE
Operating System: Windows 7 Professional 64-bit (6.1, Build 7600) (7600.win7_gdr.130318-1532)
Language: English (Regional Setting: English)
System Manufacturer: To be filled by O.E.M.
System Model: To be filled by O.E.M.
BIOS: BIOS Date: 01/11/13 16:18:14 Ver: 04.06.05
Processor: AMD FX(tm)-8350 Eight-Core Processor (8 CPUs), ~4.5GHz
Memory: 16384MB RAM
Available OS Memory: 8090MB RAM
Page File: 4406MB used, 11773MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
DWM DPI Scaling: Disabled
DxDiag Version: 6.01.7600.16385 32bit Unicode
I did notice after I had upgraded that AFX didn't support my new GFX card (Geforce 760) but I found an article that suggested a work around for this which did allow me to use the 760. I don't know if doing this is known to cause problems with renders? My GFX card has the latest drivers. I've tried disabling and enabling the GPU in AFX but either way the crashes occur. I also tried turning off/on Multicore processing as this has given me grief before. But that made no difference.
My After Effect instalation is also the latest version.
These crashes don't happen in other programs like C4D Lite (when rendering directly inside that program), or when playing recent and demanding games.
I have 16GB of RAM installed but seem to only be able to use 8GB as available memory in AFX, which also shows in the Dxdiag report. I don't think this could be causing total system freezes though and do plan on trying to fix this issue when I get time.
Thanks for any help!
-Nick.

joshweiland wrote:
I re-read your original post...
Mr.Nicklebe wrote:
Here are the specs from DxDiag:
System Information
Memory: 16384MB RAM
Available OS Memory: 8090MB RAM
It looks like DxDiag DOES realize that you have 16GB installed, but for some reason only 8GB is provided to the OS.
This is very odd. Since it detects the full 16GB, I doubt that your RAM is faulty/unseated/etc. If that were the case, it would not be recognized as 16GB.
What CPU and motherboard are you using? It's possible that a setting in your BIOS is to blame.
I've seen this happen before on computers with integrated graphics. They will use a portion of your system RAM as video RAM. But this is typically only 256MB-512MB at most...not a whopping 8GB!
Yeah pretty odd I know. My BIOS only reads 8GB of the RAM (doesnt mention 16GB at all I dont think), Resource Monitor and DXDIAG say 8GB of available memory and 16GB of total memory. I did Memtest 86 for 12 hours last night and whilst it came up with no RAM errors it also only detected half of my RAM anyway.
I decided to do some experimenting today and tested each 8GB stick on its own in DIMM slot A2 (the manual recommends this slot for single sticks of RAM). PC wouldnt boot at all with one of the sticks but would boot with the other. So I've left my PC with that one 8GB stick in now as I suspect the other one could be faulty. I dont know if this is the cause of my orinal problem but I plan on trying to render some of the projects that were freezing my PC before and seeing if I still get those freezes. If I don't then hurray problem solved! If I do then I'm stumped as to what the cause could be.
Oh and my motherboard/CPU are:
CPU: AMD Piledriver FX-8 8350 Black Edition 3.50GHz @ 4.60GHz CPU
Motherboard: Asus 990FX Sabertooth
I agree about the BIOS settings potentially being the problem, I plan on monday to ask the site I bought the bundle from about this and see if I can get replacement RAM and/or advice on whether there's anything specific I can do that would fix this. I tried googling the problem many times but almost every thread I come across is just people who don't realise their 32bit OS cant take more than 4GB of RAM which isn't the issue I'm having.

Problem with cue point from After Effects to Flash (CS5.5)

Hello,
anyone has, or has not problems reading, in Falsh, cue points included with After Effects? (Navigartion cue points).
It is possible export from Flash movie in .flv format? (Both versione CS5.5).
Thank you.

No I don't believe it's the footage, as I've been able to transfer the same files on my school computer and use it with ease.It's just any type of footage, if I attempt to drag any of my imported files (whether they're images of any kind or .mp4, .mov, .wav, .mp3) just as I would click and hold the file, my cursor turns into the Mac loading ball. Perhaps is there something these programs require such as Java? I'm not sure if it's related, but I've also not been able to play some games via Steam that I have been able to play in the past with the same system.

Camera won't move after export from after effects CC to c4d lite, need advice

Did a lot of tries, with no luck.
I did Camera tracking, the results weren't that good. the footage came from Canon 5d Mark-iii, with 14 samyang lens.
after getting the results, I could add a null object that seem to be locked into the scene and movement, I created the camera as well but when exporting to c4d. the camera isn't moving with no key frames
need advise please

Error when exporting from After Effects into Media Encoder

Hi there. I am using After Effects CC and am trying to export>add to Adobe Media Encoder CC. Upon doing so, instead of the file being placed into Media Encoder CC, I get an error message
I just updated to most recent update of After Effects via the Cloud today but no difference. Instead, After Effects just creates a folder on my system to house a duplicate composition file with "tmpAEtoAMEProject" at the beginning of file name. I can use the render queue out of After Effects just fine.
Can someone give me a solution to how I can export out to Media Encoder CC? Probably something simple I am just missing. I don't know much/can't find much about how to know if Adobe Dynamic Link components are installed. Oh, and I have also tried to just drag the files into Adobe Media Encoder too but I still get this warning. If it helps, I am on an imac OSX 10.8.5. Thanks!

Hey there. Yes, I have uninstalled AE, restarted, and reinstalled. Still get the same error shown in screenshot in my original question posted.

Can't open Premiere project exported from After Effects

I was working on something in After Effects, basically just audio and video clips. Editting really. I decided one part would be faster in Premiere so I exported a Premiere project of it. When I try to load it in premiere I get an error "The project appears to be damaged, it can not be opened.". Does anyone know if there's a way to fix this?

It doesn't cause a problem for me, and we have not heard of this on the forum as far as I can remember.
Try creating a brand new comp in a brand new project. Add some video and audio. Does that export OK?
I don't mean to be rude, and in no way do I want to be insulting, but I would feel bad if I didn't ask and it turned out to be the problem....
Since that is the symptom if you try to open a Pr project created in Ae using Premiere Pro CS6 - please check that you are opening the correct Premiere Pro. I forget which icon is which now and then and open CC when I meant to open CS6, although I have never made the reverse error. Yet.

Trouble exporting from after effects for youtube

I have edited my video using after effects. I have been unable to export my file to youtube using a valid file name. All of the results have issues with sound and quality. Any suggestions?

Without knowing your exact settings and all that nobody can say anything. Just saying that there are issues really means nothing around here.
Mylenium

Text exported From After Effects Troubles

I made titles in After Effects CS3 exported them and then imported them in Final Cut Express. When I put them in the sequence they are pixelated and fuzzy looking. Does anyone know what I have done wrong? I tried changing all the different settings in After Effects but I just can't seem to get it to work.

If you're putting it in a DV sequence then something is wrong. You should not need to render. In FCE look at item properties for the AE file and for for the sequence you're putting it in. Do the match in every respect? What doesn't match?

Quality Setting for exporting from After Effects To Final Cut

I've created an animation in After Effects for Final Cut. My Export setting are Quicktime Format Options are RGB, Millions of Colors Pre-Multiplied (Matted)
Although the font images are clear in After Effects I'm getting pixelized font images on the final product. See below
Here's the image before in After Effects before I attempt to render the movie
Quite a difference as you can see. Any suggestions for setting coming out to clear up the problem?

Michelle, are you able to get to the point in the screenshot below? Is ProRes an option there? Does animation or Apple Intermediate Codec show up? Thos might be a couple alternatives if ProRes is unavailable.

Working with footage exported from After Effects

Similar Messages

Maybe you are looking for