Working with HD content and Milti-Channel Sound AC3 in iMovie 08

I am trying to figure out how to edit video content I exported from a VOB file that the audio is in AC3. I have used tools like StreamClip to export the file into a QT MOV format, but there are no AC3 options. So I DEMUX the audio to AC3 and try to add that to iMovie 08 and still no luck. Looks like 08 does not support m2v format.
What I want to do is I have a number of HD/SD media that all have 5.1 Surround and I am simply wanting to merge them together into one big clip, with maybe some fine tuning of the clip length nothing fancy, but I want to retain the AC3 5.1 Surround sound content. Any ideas? I have FCE will that help me?

I am trying to figure out how to edit video content I exported from a VOB file that the audio is in AC3.
AC3 content is not editable in QT applications.
I have used tools like StreamClip to export the file into a QT MOV format, but there are no AC3 options.
MPEG Streamclip by default down-mixes 5.1 (3/2) AC3 down to stereo. (Other options include: Front Mix, Surround, L/R Ch., Center Ch., LS/RS Ch., and LFE ch. which can then be exported as stereo or mono.)
So I DEMUX the audio to AC3 and try to add that to iMovie 08 and still no luck.
As stated above, iMovie '08 does not support AC3 as a compression format. In addition, iMovie '08 cannot access third-party components so even if you have an AC3/A52 component installed, it will not work. Further, even if it did support AC3 compressed audio, iMovie '08 itself only supports stereo audio.
Looks like 08 does not support m2v format.
iMovie '08 will support M2V video content in an MOV file container if and only if all P- and B-frames have been converted to I-frames making the file equivalent to a Motion-JPEG video clip.
I have FCE will that help me?
Not Really.
What I want to do is I have a number of HD/SD media that all have 5.1 Surround and I am simply wanting to merge them together into one big clip, with maybe some fine tuning of the clip length nothing fancy, but I want to retain the AC3 5.1 Surround sound content.
In the end, all of the various possible work flows depend on how you plan to play the content. This, in turn, determines which work flow is best suited to your needs. Basically you can convert and then edit in QT editor applications or edit in MPEG Streamclip, (save,) and then convert for a final target use/device.

Similar Messages

Wireless Bridge Not working with 5200,5220 and 5240 channels

Hi Team;
I am setting up a bridge connection with 1262 AP as the root and 3502 as the non root and i observed that it is working with only channel 36. If i am setting up other channels like 40,44 & 48 its not working.
My partnumber is 3502E-E-k9 and 1262E-E-K9

Post your radio interface configuration in both ROOT & NON-ROOT to check.
HTH
Rasika

I have recently installed Mavericks and since then I have been unable to shut down or log out of my mac. I work with two screens and now I seem to have programmes at the top of both screens which I didn't before. any advice?

I have recently installed Mavericks on my desk top and since then I have been unable to switch off my computer without crashing it. I work with two screen and now I seem to have the menu bar on the second screen as well which I did not have before. Can you please help me?

Dr Bettina, I had similar problems with Mavericks. I installed it on a Mini and a 13" MacBook Pro. I can't speak to your disdplay issues, but I can confirm the inability to logout, shut down, or restarft without a forced, power button shut down. I can also report frequent System Prefs freezes and finder issues, like folder contents taking half a minuite or more to render, or not appearing at all. And while a few Adobe CC apps actually ran faster, InDesign ran like molasses uphill in Decemner.
I tried uninstalling or disabling numerous 3rd party apps and pref panes. I unplugged everything but the keyboard, ran DiskWarrier, repaired permissions, did fsck -f, trashed various preference files, reinstalled the OS... You name it, and I tried it — short of a potion using eye of newt.
After two days of totally hosed productivity, I restored OS 10.8.5 on the Mini so I could actually get some work done. However, I've decided to leave Mavericks on the MBP as a sort of crash dummy, and will install and thoroughly test all updates until stability has been achieved. Then — and only then — will I upgrade the Mini to Mavericks, even if it means waiting 'til a .2 or even .3 update.
Good luck to you...

Existing Apple ID is not longer working with Face Time and Message on the iPhone after iOS 6

After the IOS 6 update on my iPhone the Apple ID is not longer working with Face Time and Message. Each time I try to log in I receive the message that the password or the user is not right. But they are, because on all other devices and all other parts of the iPhone (iCloud, AppStore, iTunes) they are working. Other Apple IDs are working fine.
What's wrong? Any idea?
Thanks

Blue
It sounds like you restored from an old back-up. Did you back-up just before your software update? It will use your last one and if your last back-up was a ywear old then it will use that one.
In general, if you are getting these messages on your iPhones select logout (when you get that Apple Id request) and then log back in with your newer ID.
Sorry for your losses.
Cheers

Interested in work with Weblogic Content Express

Hello, I'm interested in work with Weblogic Content Express and I would like some information (stepts) about how obtain this product because we are working with Weblogic Server, Weblogic Commerce Server and Weblogic Personalization Server and I can't found this tool. Thank for your attention and your help. Carlos

Try this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju...
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How do I import an old home movie on DVD into iMovie with video_ts content and .vob files

Hi, as a new mac user I would appreciate any help to use imovie to import an old home movie on DVD with movie_ts content and .vob

You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
which is free, but you must also have the Apple mpeg2 plugin :
http://store.apple.com/us/product/D2187Z/A/quicktime-mpeg-2-playback-component-f or-mac-os-x
(unless you are running Lion in which case see below))
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
And from the TOU of these forums:
Keep within the Law
No material may be submitted that is intended to promote or commit an illegal act.
Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
If you are running Lion or later:
From the MPEG Streamclip homepage
The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion onwards, however MPEG Streamclip still needs it. See this:
http://support.apple.com/kb/HT3381
To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. (The same applies to Mountain Lion and Mavericks even though they have it preinstalled.) You don't have to install QuickTime 7.

HT4859 I have an iPhone 5 and have just set up the iCloud for it. I also have an iPad with different content and I also want to connect it to iCloud. Will I lose everything that's on my iPad or iPhone or do they sync together without losing anything?

I have an iPhone 5 and have just set up the iCloud for it. I also have an iPad with different content and I also want to connect it to iCloud. Will I lose everything that's on my iPad or iPhone or do they sync together without losing anything?

The problem is that all services are bundled with your Apple ID ([email protected]):
Your iCloud account (Mail, Contacts, Calendars, Reminders, Notes, Backups, etc.),
also iTunes & App Store purchases (Music, Movies, TV Shows, etc.),
and the iTunes Match services.
(I guess that all your devices - yours and your wife's are connected to one iTunes library, right?)
If you want that your wife gets her own iCloud account for Mail, Contacts, Calendars, etc. but gets also access to your media then you have two set up two things on her device:
iCloud (Settings > iCloud) with her account (e.g. [email protected])
and
iTunes & App Stores (Settings > iTunes & App Stores) with your account (e.g. [email protected]).
In this case she gets access to your library and could use the same iTunes Match account.
(See also: Using one Apple ID for iCloud and a different Apple ID for Store Purchases http://support.apple.com/kb/HT4895)

Is there a way to download Firefox 4 without going on a 3rd party site? Many of my addons do not work with Firefox 5 and 6.

Quite a few of my addons don't work with firefox 6, and I would prefer to keep them, but my pc crashed and I had to reformat. I don't want to have to go on a 3rd party site, since they could easily put a virus on my pc. I couldn't find anywhere to download it on the site.
Thanks

ftp://ftp.mozilla.org/pub/firefox/releases/4.0.1/
Just keep in mind that Firefox 5.0 was a security release for 4.0.1.

Working with AVCHD: Log and Transfer FAQs

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
Working with AVCHD: Log and Transfer FAQs
Log and Transfer was introduced to the product chain in Final Cut Express 4, and is the program's process for ingesting files in the AVCHD format utilizing MPEG-4 AVC/H.264 video coding and either Dolby AC-3 or uncompressed linear PCM audio coding. The most frequently observed problems relating to the Log and Transfer process are generally quite easily addressed.
What should I know before attempting to ingest my footage?
The following facts regarding the Log and Transfer process were adapted from the [Apple Knowledge Base article|http://support.apple.com/kb/TA24840?viewlocale=en_US] on transferring AVCHD in Final Cut Pro 6.0.1 but still hold true for the current version of FCE:
AVCHD support is available only on Intel-based Macintosh computers.
AVCHD camcorders typically connect to computers via USB 2.0, not FireWire.
DVD-based AVCHD camcorders are not supported in Mac OS X 10.4 or earlier.
Standard definition video recorded with AVCHD camcorders cannot be accessed in the Log and Transfer window. SD and HD clips should not be mixed on the same HDD.
Preview of AVCHD video in the Log and Transfer window is limited to 1x forward playback. Scrubbing the playhead does not update the video in the Preview area until you stop scrubbing.
When you choose to transfer AVCHD audio in the Logging area, audio is automatically mixed down to stereo.
AVCHD footage is not ingested natively but is transcoded to the Apple Intermediate Codec.
Apple Intermediate Codec files are significantly larger than the original AVCHD files. FCE does not estimate the size of a transcoded AVCHD file before ingesting, so it is possible to exceed the available space on your capture disk during transfer. Before ingesting, keep in mind that the disk space required is about ten times greater than the size of the native AVCHD file.
Which specific formats can be ingested by Log and Transfer?
Only AVCHD footage can be ingested through the Log and Transfer process. Other formats and variants such as AVCHD Lite are not supported. All video should be recorded in a frame size of either 1440x1080 or 1920x1080 and a frame rate of 25 or 29.97 frames per second. Audio recorded on AVCHD camcorders is generally at a rate of 48kHz. If your camera shoots in a format that does not comply with one of these setups then it is most likely not supported by the application and is not guaranteed to work correctly.
Which Easy Setup preset should I select before ingesting my footage?
It is extremely important to select the preset that matches your media before you attempt to ingest via Log and Transfer. There is only one Easy Setup preset that matches the frame size and rate of your footage. If you intend to ingest AVCHD clips through Log and Transfer you will first need to select one of the following presets:
AVCHD-Apple Intermediate Codec 1440x1080i50
AVCHD-Apple Intermediate Codec 1440x1080i60
AVCHD-Apple Intermediate Codec 1920x1080i50
AVCHD-Apple Intermediate Codec 1920x1080i60
If these four options do not appear under your Easy Setup list then you probably need to run Software Update and update to FCE 4.0.1. DO NOT cycle through the available presets until you find one that works - there is only one preset that matches your media and it should be evident which one to choose by the way it is named. Select the AVCHD preset that mentions your frame size and frame rate (i50 presets support both 50i and 25p frame rates; similarly, i60 presets support both 60i and 29.97p frame rates). If you do cycle through many options in the hope of selecting the correct one through guess-and-check you will probably have corrupted your preference file and need to [trash your preferences|http://support.apple.com/kb/TS2611] before continuing.
Why don't my clips appear when I open the Log and Transfer window?
Make sure your camcorder records AVCHD in a format supported by FCE4. It should be connected to one of your computer's USB ports (never connect it to an external hard drive or other external device such as your keyboard or a USB hub), powered on, and set to video playback mode.
If the camcorder +does not+ mount on your Desktop your USB port or cable may be malfunctioning. Try plugging it in to another port or using a different USB cable to see if it makes a difference.
If the camcorder does mount on your Desktop but the clips do not appear in the Log and Transfer window you will need to point the program to the directory that contains your media.
First, click the Add Folder button in the upper left of the Log and Transfer window. The button looks like this:
Then, you will need to navigate to the root directory in which your media is stored. Most camcorders call this folder "PRIVATE" or "AVCHD" and it should be located at the very top level of the camcorder when mounted. If your camcorder records to a valid AVCHD directory structure then your clips should load after the Add Folder process is completed.
I would like to keep a working backup of my original clips so that I can delete them off the camcorder's internal memory. How should I do this?
There are two main ways to keep a backup of your clips. The first is to ingest every clip on your camcorder through the Log and Transfer process, and store the Apple Intermediate Codec files the application creates in an easily accessible place such as an external FireWire drive. The advantage of this method is that you have the ability to open back up old editing projects, reconnect the media as necessary, and keep going as if you'd never left. However, due to the large amount of space AIC takes up (usually somewhere in the vicinity of 41-50GB an hour when transcoded from AVCHD), this is not always feasible.
Another often preferable approach is to copy over the root directory in which your clips are stored (usually named "PRIVATE" or "AVCHD") from the camcorder to your computer or an external drive. As long as you maintain the original file structure, you will be able to ingest your clips again at a later date using the "Add Folder" process detailed above to navigate to their new location.
My clips appear, but when I attempt to ingest a red exclamation point appears and the window displays the message "Error: No Data"
This is one of the most common problems that users experience when trying to ingest their media through the Log and Transfer process. Luckily, it also has one of the easiest solutions.
In the Log and Transfer window, click on the gear icon in the top right and select "Preferences" in the contextual menu that appears.
Make sure the video is set to transcode to the Apple Intermediate Codec and the audio is set to Plain Stereo.
After doing so, hit OK and try to ingest again.
I am experiencing a problem that is not covered in this tip or the solutions here do not work.
The best thing to do at this point would be to trash your preferences and start a new topic in the [FCE Forum|http://discussions.apple.com/forum.jspa?forumID=936&start=0] with a detailed description of your problem. Check out the user tip on [Basic Troubleshooting in Final Cut Express|http://discussions.apple.com/thread.jspa?threadID=2662419] for more information.
This is the 1st version of this tip. It was submitted on December 03, 2010 by skalicki`.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
Working with AVCHD: Log and Transfer FAQs
Log and Transfer was introduced to the product chain in Final Cut Express 4, and is the program's process for ingesting files in the AVCHD format utilizing MPEG-4 AVC/H.264 video coding and either Dolby AC-3 or uncompressed linear PCM audio coding. The most frequently observed problems relating to the Log and Transfer process are generally quite easily addressed.
What should I know before attempting to ingest my footage?
The following facts regarding the Log and Transfer process were adapted from the [Apple Knowledge Base article|http://support.apple.com/kb/TA24840?viewlocale=en_US] on transferring AVCHD in Final Cut Pro 6.0.1 but still hold true for the current version of FCE:
AVCHD support is available only on Intel-based Macintosh computers.
AVCHD camcorders typically connect to computers via USB 2.0, not FireWire.
DVD-based AVCHD camcorders are not supported in Mac OS X 10.4 or earlier.
Standard definition video recorded with AVCHD camcorders cannot be accessed in the Log and Transfer window. SD and HD clips should not be mixed on the same HDD.
Preview of AVCHD video in the Log and Transfer window is limited to 1x forward playback. Scrubbing the playhead does not update the video in the Preview area until you stop scrubbing.
When you choose to transfer AVCHD audio in the Logging area, audio is automatically mixed down to stereo.
AVCHD footage is not ingested natively but is transcoded to the Apple Intermediate Codec.
Apple Intermediate Codec files are significantly larger than the original AVCHD files. FCE does not estimate the size of a transcoded AVCHD file before ingesting, so it is possible to exceed the available space on your capture disk during transfer. Before ingesting, keep in mind that the disk space required is about ten times greater than the size of the native AVCHD file.
Which specific formats can be ingested by Log and Transfer?
Only AVCHD footage can be ingested through the Log and Transfer process. Other formats and variants such as AVCHD Lite are not supported. All video should be recorded in a frame size of either 1440x1080 or 1920x1080 and a frame rate of 25 or 29.97 frames per second. Audio recorded on AVCHD camcorders is generally at a rate of 48kHz. If your camera shoots in a format that does not comply with one of these setups then it is most likely not supported by the application and is not guaranteed to work correctly.
Which Easy Setup preset should I select before ingesting my footage?
It is extremely important to select the preset that matches your media before you attempt to ingest via Log and Transfer. There is only one Easy Setup preset that matches the frame size and rate of your footage. If you intend to ingest AVCHD clips through Log and Transfer you will first need to select one of the following presets:
AVCHD-Apple Intermediate Codec 1440x1080i50
AVCHD-Apple Intermediate Codec 1440x1080i60
AVCHD-Apple Intermediate Codec 1920x1080i50
AVCHD-Apple Intermediate Codec 1920x1080i60
If these four options do not appear under your Easy Setup list then you probably need to run Software Update and update to FCE 4.0.1. DO NOT cycle through the available presets until you find one that works - there is only one preset that matches your media and it should be evident which one to choose by the way it is named. Select the AVCHD preset that mentions your frame size and frame rate (i50 presets support both 50i and 25p frame rates; similarly, i60 presets support both 60i and 29.97p frame rates). If you do cycle through many options in the hope of selecting the correct one through guess-and-check you will probably have corrupted your preference file and need to [trash your preferences|http://support.apple.com/kb/TS2611] before continuing.
Why don't my clips appear when I open the Log and Transfer window?
Make sure your camcorder records AVCHD in a format supported by FCE4. It should be connected to one of your computer's USB ports (never connect it to an external hard drive or other external device such as your keyboard or a USB hub), powered on, and set to video playback mode.
If the camcorder +does not+ mount on your Desktop your USB port or cable may be malfunctioning. Try plugging it in to another port or using a different USB cable to see if it makes a difference.
If the camcorder does mount on your Desktop but the clips do not appear in the Log and Transfer window you will need to point the program to the directory that contains your media.
First, click the Add Folder button in the upper left of the Log and Transfer window. The button looks like this:
Then, you will need to navigate to the root directory in which your media is stored. Most camcorders call this folder "PRIVATE" or "AVCHD" and it should be located at the very top level of the camcorder when mounted. If your camcorder records to a valid AVCHD directory structure then your clips should load after the Add Folder process is completed.
I would like to keep a working backup of my original clips so that I can delete them off the camcorder's internal memory. How should I do this?
There are two main ways to keep a backup of your clips. The first is to ingest every clip on your camcorder through the Log and Transfer process, and store the Apple Intermediate Codec files the application creates in an easily accessible place such as an external FireWire drive. The advantage of this method is that you have the ability to open back up old editing projects, reconnect the media as necessary, and keep going as if you'd never left. However, due to the large amount of space AIC takes up (usually somewhere in the vicinity of 41-50GB an hour when transcoded from AVCHD), this is not always feasible.
Another often preferable approach is to copy over the root directory in which your clips are stored (usually named "PRIVATE" or "AVCHD") from the camcorder to your computer or an external drive. As long as you maintain the original file structure, you will be able to ingest your clips again at a later date using the "Add Folder" process detailed above to navigate to their new location.
My clips appear, but when I attempt to ingest a red exclamation point appears and the window displays the message "Error: No Data"
This is one of the most common problems that users experience when trying to ingest their media through the Log and Transfer process. Luckily, it also has one of the easiest solutions.
In the Log and Transfer window, click on the gear icon in the top right and select "Preferences" in the contextual menu that appears.
Make sure the video is set to transcode to the Apple Intermediate Codec and the audio is set to Plain Stereo.
After doing so, hit OK and try to ingest again.
I am experiencing a problem that is not covered in this tip or the solutions here do not work.
The best thing to do at this point would be to trash your preferences and start a new topic in the [FCE Forum|http://discussions.apple.com/forum.jspa?forumID=936&start=0] with a detailed description of your problem. Check out the user tip on [Basic Troubleshooting in Final Cut Express|http://discussions.apple.com/thread.jspa?threadID=2662419] for more information.
This is the 1st version of this tip. It was submitted on December 03, 2010 by skalicki`.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

HT201210 hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

APPLE DOCKING STATION NO LONGER WORKS WITH TOUCH 3G and 4G after ios 4.2.1

APPLE DOCKING STATION NO LONGER WORKS WITH TOUCH 3G and 4G after ios 4.2.1 update.
I have both of these touches. I updated both 3g and 4g to ios 4.2.1 and poof...no docking station support other than charging, no audio and no remote function. My av/cable works with the tv, and the headphone jack still outputs audio, just no auido through the Apple dock and hte remote is dead. I purchased the dock from the apple store last year and it was working with both ipod 3g and 4g grrrrr...
Is Apple now in the bug trade business?, trade one for another....
Anyone else have this problem?

My iPod Touch 3G running 4.2.1 works fine with the Apple docking station.
Perhaps you have a loose cable somewhere and/or a dead battery in your controller?

Why Model MD297AE/A is not working with Fcae time and Model MD293C/A is working in UAE with Facetime

Why Model MD297AE/A is not working with Fcae time and Model MD293C/A is working in UAE with Facetime.
In fact I have given my iPhone to my daughter to use in Canada (purchased from UAE ISP) she is unable to use Face Time within Canada. ?
Is it possibile to activate FaceTime in Canada if iPhone is purchase from UAE.
Purchase under Points by ISP (No contract)
Thanks
Abbas

Hello sir
I agree what u replied for the above question, but because of the UAE request, you cannot deactivate the facetime completely from this iphone, they should stop working through SIM network. The iphone is a universal mobile which can travel all over the world, many tourist people will suffer due to that, pls re-consider in taking back and try to make it upgrading this software.
Thanks
SATHISH KUMAR

I am working with Acrobat XI and when I try to add text to geopdf file I get a popup screen that says this is a secured document and editing is not permitted. How do I fix this?

I am working with Acrobat XI and when I try to add text to a geopdf file I get a popup screen that says this is a secured document and editing is not permitted. How do I fix this?

I figured it out...needed to use comment tool set, not the editing tool set.

Can I email photos w/o templates Iphoto provides? I used to be able to choose a few photos and email them. Now I have to work with these templates and can barely see what I'm writing!

I used to be able to choose a few photos and email them. Now I have to work with these templates and often do no want to. Could someone tell me the process for choosing to send photos without the templates?

Like Larry pointed out in iPhoto's General Preferences pane:
Click to view full size
OT

[svn:fx-trunk] 5019: ASDoc updates to indicate that some Halo containers do not work with the Spark equiv (ControlBar does not work with Spark Panel/ AppControlBar does not work with Spark Application), and indicate that Canvas, Box, Tile, Panel have Spa

Revision: 5019
Author: [email protected]
Date: 2009-02-19 13:17:21 -0800 (Thu, 19 Feb 2009)
Log Message:
ASDoc updates to indicate that some Halo containers do not work with the Spark equiv (ControlBar does not work with Spark Panel/AppControlBar does not work with Spark Application), and indicate that Canvas, Box, Tile, Panel have Spark equivs
QE Notes: None
Doc Notes: None
Bugs: -
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Accordion.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ApplicationControlBar.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Box.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Canvas.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ControlBar.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/HBox.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Panel.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/TabNavigator.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/Tile.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/VBox.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/containers/ViewStack.as

Hi DST
This is a great effort and gesture. thank you on behalf of all the newbies.
PJ

Working with HD content and Milti-Channel Sound AC3 in iMovie 08

Similar Messages

Maybe you are looking for