Working with Hi Baud Rates Via 422/485

Hi all ,
I'm working with CVI 9.1 and i have 2 PCI Cards :
Advantech PCI Serial port - RS232
FastCom Async PCI-335 - RS422 / 485
I know there is basic serial com lib which contains RS232 Funcs , i also know that those funcs work well with 422 / 485,,,
My problem or Question is that i need to use 6M baud rate which reflects 50MH There is no option to chose this Baud rate at the rs232 func , if i'll enter it manually will it work ?
Or maybe there is an 422 / 485 lib ?
Thank You
Kobi Kalif
Software Engineer
Solved!
Go to Solution.

You will need to set the FastCom board clock generator to a non-standard frequency. The manual for the card explains how to do this by using Windows API IOCTL function calls. There are also example programs on the CD supplied with the card.
Martin
Certified CVI Developer

Similar Messages

Reading instruments with mutiple baud rates

Hi,
I have two pressure manometers with RS-232 ports.
One of them is 2400 baud rate while the other is 9600 baud rate.
They continously spit out data on the port and there is no way to send commands to the two devices.
Since i have only one serial port, i am using a usb to serial adaptor for one of the devices.
I want to be able to read the two devices simaltaneously in a while loop, i come across the following error.
The instrument with the higher baud rate (9600) does not respond after the first read value and displays wrong information while the one with lower baud rate (2400) does respond correctly. If you change the pressure on the lower baud rate meter the higher baud rate meter begins to respond.
I suspect there is a problem with the timming ? Any ideas how i can solve this issue and get a clean stream of continous data ?
Thanks
Gagan
Attachments:
water pressure and temperature.vi ‏328 KB

duplicate post

Apple wired keyboard. Number pad not working with Windows Office 07 via bo

I have a 27' Quad core i7 with windows 7 loaded via bootcamp. i have Office 2007 loaded in the Windows partition.
My problem is that the number pad on my wired apple keyboard does not work in excel or word. The number at the top of the keyboard work fine.
Has anyone found a solution please.
Message was edited by: Fernbergjim

Hi,
does the numpad work in other Windows programs, or is it just the MS Office programs ?
Have you tried the 'clear'-key (the one above the '7'-key on the numpad) to enable the numpad ?
Regards
Stefan

Time Capsule not work with appletalk printers connected via ethernet?

I have seen no definitive answers to this problem posted here or on support forum. Some have suggested (but Apple refuses to confirm) that Time Capsule does not support AppleTalk devices (particularly printers) connected via Ethernet to Time Capsule. Even the "Genius Bar" guys can't tell you for sure, but this is what they suspect also.
I am a 25 year Macintosh user. I have conducted numerous experiments on this problem. What follows is my analysis and work around.
I have found no way to connect AppleTalk printers to Time Capsule by an Ethernet network connected to the back of the Time Capsule. It just doesn't work. Forget all the posts about what to try. Especially forget about resetting your printer settings. Waste of time. This leads me to conclude that those who suspect that Time Capsule does not support AppleTalk printers connected on an Ethernet network are absolutely correct. It is a hardware or software deficiency. I do not know why Apple won't just publish this in their technical specs. It would save us users a lot of time and frustration.
Now the work around. The only thing that I have found that will work is to set up an Airport Extreme to extend the wireless network created with the Time Capsule. Plug your ethernet network into the Airport Extreme, NOT into the Time Capsule. I presume (but have not tested) that this works with an Airport Express as well. I did this with my old Airport Extreme that I had left over after buying my new Time Capsule. Now the printers show up again and print fine.
Please let me know what your results are if you try this.

The problem is caused by an interaction between the Airport Extreme Update 2008-004 and the TC 7.3 firmware. I swapped out my TC for my AirPort Extreme (which sat on a shelf unused since I bought the TC). It has version 6.xx of the firmware. Immediately I could see my printer when I wirelessly connect with my MBPro and can print from it. I put the TC back and then did an Archive and Install of 7.5 on my MBPro. I did every software update except the Airport Extreme Update 2008-004. I could see my printer and print to it! After cloning my HD, I then applied the 2008-004 update to 7.5.5. That broke the wireless printing again! I tried TC firmware 7.3, 7.3.1, and 7.3.2 but not go. It is clear that my computer is trying to communicate with the printer (lots of flashing lights on my LAN switch) but no successful handshaking. I restored my hard drive from the clone and I now I can print again. Final word: if you want to print from a wireless computer connection to an AppleTalk printer connected to TC's LAN do not apply the 2008-004 update to your computer. Apple: please fix this problem.

Have had my iPad 2 for 3 months. All of a sudden I can't get on line either with WiFi, which is working with my computer, or via the 3G celluar. What's wrong? How do I fix it?

I have had my iPad2 for 3 months. All of a sudden I can't get on line with either my WiFi, which works with my Mac, or 3G celluar. A locked icon appears in the upper right corner of my screen near the battery indicator? Apple support tells me to go "Settings" and click "Reset Network." Cannot find a "Reset Network" button. What can I do to get on line?

Thank you, Sir. You are a genius. I'm now on line and appreciate your help very much. The "reset" button was at the bottom, out of my sight, until I scrolled down as you suggested.

S-video output does not work with iOS5.1.1 via ipod dock

After upgradig my Touch to iOS5.1.1 I cannot see video etc. on my TV via my Ipod Dock.
It was working fine before the upgrade.
The ipod is telling me, that it's connected to the TV, but nothings appears on my TV.
It was working fine before the upgrade.
I have tried to contact Apple Support but I have not succeded finding out how to contact them about the bug.
Anyone else experience same problem?
Regards
obertel

I have the same issue with my iHome iW1 AirPlay. After updating both my iPhone 3gs and ipad 3, it cannot use my iW1 with airplay. Also when I plug one of my iOs device to the iW1 I get the infamous "Charging is not supported with this accesory"....
Anyone got a workaround?

Airport extreme working with external hard drive via USB port adaptor :)

Hi Everyone. I hope this post will be helpful because I have been very frustrated with apple and their customer support and I figured this out on my own by reading all of the discussions and playing with my settings but it took me a while...
I recently for school bought all apple products and I have non-mac products as well. I bought the airport extreme believing I could hook up all of my computers through it and share the printers and my mybook external hard drive with my husbands desktop and the other lap tops. Unfortunately this was not as easy as advertised...
I was not able to successfully have both computers stay connected to the printers so I have to have mine for my laptop connected via the airport extreme and my husband has his desktop connected to a different printer via a ethernet cable. It would work at set up and then a few hours later not print anymore and reinstalling the drivers just confused it... if anyone knows a solution for this please let me know. It worked wirelessly for me but not for him.
As far as the external drive for the airport extreme goes I went and bought an additional USB port hub so I could access my printer wirelessly and my external hard drive as well for time machine back ups.
I set up my external hard drive so that it will save files from both a mac and a non-mac computer and we can both access it (not sure if that matters in the solution or problem for others); however, the desktop (non-mac) was able to by clicking and dragging files to it assess the hard drive and utilize it and my macbook was not able to because the airport extreme showed the drive under disks but when I tried to access it through time machine it was not there. I played with this for a long time and finally figured it out.
I believe I went under finder, then chose go from the menu bar, then chose connect to server and the default for it is afp://10.0.1.1.. You enter this in under server address and you may be prompted to give your password. The password was tricky as well because it showed my computers user name and I thought it would want that password but instead it wanted the password to log into my internet or my airport extreme's password. Once I put this in I was able to open my time machine preferences, finally choose the mybook external hard drive that was now showing up, choose it and my computer is currently doing a back up as I type without the error message of failed, unable to locate volume, or any others.
Hope this posting was helpful and not to confusing and feel free to message me if you need clarification and think this may solve your problem as well. GOOD LUCK!

Seems to me you should have done your homework setting up your network and not assuming that any third party device you choose to use would work without problems.

Mac Mini I-7 2.0 (server edition) won't work with Dell 2709W monitor via HDMI

I just got a Mac Mini I7 quad 2.0. It's the server edition with an HDMI port. I plug my Dell 2709W monitor in and it continously flickers on and off and shows a green screen and the desktop for short intervals. Can anyone help with this issue.

Does the monitor work OK when connected to another HDMI output device?
Does the Mini HDMI output work OK when connected to another HDMI device?
You have selected the HDMI input on the monitor, right?

Migration Assistant not working with OS X Lion via Wireless Network?

Anybody know how to assist me here?
Basically, I have two iMacs on seperate floors of my home. They are newer models (both purchased last year) and I have upgraded both of them to Lion and just ran a system update on both of them to ensure they are both running the exact same OS with updates and all.
When I attempt to use the migration assistant over my network, it just says its attempting to find the other computer but never moves past that step, as if they aren't connecting or even finding each other at all.
I'm relatively new to the mac family and am very happy I've finally made the switch last year and am still learning the in's and outs and am simply stuck here and not sure what to do to get this to work.
Thank You

Try running software update to install 10.7.1. This update reportedly fixes your issue. Check out http://support.apple.com/kb/DL1437 for more information.
Good luck

Working with multiple frame rates

Hi- I unfortunately am dealing with a project where I'm dealing with potentially 3 different frame rates. I have some shot at 29.97ndf, some HDV captured using 1080i60 and some P2s converted for FCP and are at 23.98.
I understand that FCP 6 can handle different frame rates in the same timeline, so... are all these different rates something I need to be concerned with? I'll need to cut these together into a single montage and my end product will be a DVD.
Thanks for your help.
Robert

Thank you guys. Any specific ProRes? (there are so many of them). So... does this mean when I render it at 29.97 for NTSC all the 23.98 footage is going to get speed up like chipmunks?
Thanks again.
Robert

HP LaserJet P1102w Not Working with Mac when connected via USB

I'm using an old HP LaserJet P1102w - I installed the drivers and the software, and when I connect to my computer, nothing happens. It recognizes the printer, and it says that it's using "Generic PCL Printer" as the driver. The Print Queue has a good time pretending it printed things, and nothing comes out.
Someone tell me how to fix this POS before I throw it out a window.

Hi oprachck,
I see by your post you are having some issues printing from the Mac. I can help you, but I will need some more information.
The driver "Generic PCL Printer", wouldn't be the correct driver using the Laserjet P1102w.
If you are using 10.8 or 10.9, the drivers are installed by the Apple Updates.
OS X v10.9 Mavericks: Installing and Using the Printer on a Mac.
If you are using 10.7 or lower the drivers can be downloaded from this link.
HP LaserJet Pro P1102w Printer Drivers.
Check the driver name that is installed for the printer. Make sure it shows just the printer's name.
Click the Apple menu and then click System Preferences. Click Printers & Scanners, highlight the printer name on the left side and on the right side of the screen should show the name.
If the full printer name isn't listed correctly, delete it and add the printer name back in from the list. Click the - sign to delete the driver and then click the + sign to add the driver, might have to click the drop down to select the printer's name to add it in.
What operating system are you using? Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
How is the printer connected? (USB/Wireless)
Please provide in detail the results if you are still having issues.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Is there an iPod touch model which will work with a video projector via an HDMI cable?

I want to use an iPod touch to use an app called iSing Worship in our church. This app plays worship songs and enables the lyrics to be projected on a screen using a video projector. Is this possible and if so, which model iPod touch will I need to purchase?

- If that app supports TV out,the app description will say, then you need a 4G or later iPod and the HDMI/Digital adopter cable. You can also use and Apple TV abd Airplay to the Apple TV
- If the app does not suport TV out then you need a 5G iPod since the 5G will mirror the iPpd's screen, Yu then need
- Via Airplay to an Apple TV.
or this cable.
- http://store.apple.com/us/product/MD826ZM/A/lightning-digital-av-adapter?fnode=3 a

Should my new Mac mini work with my HD tv via the HDMI port?

I am using the apple HDMI cable with a Genesis brand HD tv. When I start up the mini, I see the start-up screen and the apple shows, but once it is beyond that, it disappears. The screen shows a resolution and not the "no signal" but nothing beyond that. Any ideas? Unfortunately, I can't test the VGA adapter, because I didn't buy one.
Thanks.

Open Displays preferences and switch to the other display (TV) or put the Mini into Mirror mode.

GPS not working with fw V4.0723.2.0.1 on N73

I upgradet my N73 to latest firmware and since then I can not use my GPS receiver any longer. It connects via bluetooth to the GPS receiver but the NMEA are not transfered.
I think that the problem is with the baud rates. Otherwise the bluetooth is working fine.
PLEASE HELP me to solv this problem, because the use of nav software is the nr1 reason why I have this phone.
Thanks in advance

to --> genesis
nokia have got so many complaints regarding to the N80 Firmware V 4.0707.0.7 & that was a BETA firmware so the Nokia Team would have to do less work by launching it to the public n then creating a new firmware fixing da problems.
Also I can back my theory up. for example I have a Flashing Box n access to the latest firmware before it is even released on NSU so therefore wen the N80 4.0707.0.7 firmware was released on NSU i could not get hold of it before it was added to NSU same wid this new N73 firmware...
Coz Nokia dont give Flashing Company access to BETA firmwares...so therefore they can not upload to the website for downloading,,,
If you find my post useful then click on
Kudos!Nokia N96 (v20.050 / RM-247)
www.shaysoft.net | Competitions!

MBP CD2 DVI to VGA not working with projector

I am having issues getting the MBP to recognize a DELL 2300 projector through a DVI to VGA apple cable.
A few months ago there were posts about this, but no solutions. The problem seems to be with the 'INTEL' side of things, as the same projector with the same DVI to VGA apple cable works on an older G4 tower running 10.4.9. The projector also works on an old G4 iBook with it's version of a VGA adapter. To make things more confusing, a DVI to Video apple cable works with the DELL 2300 on my new MBP C2D-but produces a terrible quality picture. Mysteriously, my previous 1st generation MBP CD worked with the DELL 2300 via a DVI to VGA apple cable (but I'm not sure which OS was out at the time 10.4.8?)
My new MBP CD2 definately recognizes the projector through the DVI to VGA adapter, but the projector doesn't recognize the video signal from the computer. It is DEFINATELY the MBP (or universal drivers), as I have checked the DVI to VGA dongle (works), have checked the projector (works with an ibook running 10.4.8 OSX with VGA dongle), have changed resolution settings before and after connecting, have restarted computer, have tested various orders of connecting the projector and cables. STINK! (I also have TWO DVI to VGA adapters, so it is not a bad adapter). I have also played with exchanging various plist files from older universal versions of 10.4.8 that worked with the projector-no help.
As I stated, the projector will work (in horrible quality) with a DVI to Video dongle. Why it will not work with the DVI to VGA dongle is a mystery and annoying I would hope that a newer MBP CD2 would be plug and play (like my previous MBP CD and an old G4 tower and an old iBook G4...but no).
Any ideas, any help, any answers?

Here are the actors in our play today
1. MacBookPro A. (my system a CD2 2.16 with OSX 10.4.9)
2. MacBookPro B. (my friends system a CD2 2.16 with OSX 10.4.9)
3. an iBook (my friends 1.07 GHz G4 with 10.4.8 and a VGA adapter)
4. DELL 2300 MP projector
Plugged in DVI to VGA adapter to the virgin MacBookPro B (never had the projector plugged into it before) Dell projector shows that it recognizes an analog RGB 800X600 signal from MBP B. It projects a beautiful desktop. All is well for a moment.
In Display preferences we see for the MBP B
Color LCD, Display: 800X600 stretched, Colors: Millions, Refresh Rate: N/A
VGA Display
Now, I unplug the DVI to VGA adapter and naturally MBP B readjusts to it's native resolution. Great.
Now I immediately plug back in the DVI to VGA adapter. The computer and the projector searches for signal with none found, while the computer shows no attempt at an automatic readjustment as above (800X600 stretched).
I try the 'detect display' option. It causes computer to stall for a second (as it searches) but it does not detect projector and does not readjust it's own resolution to 800X600 stretched as it did initially. F7 key does nothing.
This is a problem!
So, I shut down the projector. I unplug the projector's power source and waited 20 seconds. plugged it back in, started projector back up.
I shut down/restarted the MBP B.
I plug back in the DVI to VGA adapter into the MBP B. The MBP B screen flashes to all blue, but does not automatically change to 800X600 stretched (remains at native resolution and does not recognize an external monitor/projector)
Enter the iBook!
I plug the iBook's VGA adapter into the projector. The projector shows that it recognizes an analog RGB 1024X768 60Hz signal and projects desktop screen immediately. Plug and play!
iBook display prefs reveal:
Color LCD, 1024X768, colors: Millions, Refresh rate: N/A
Color tab: Generic RGB Profile
VGA display, 1024X768, colors: Millions,
Now. I unplug adapter from iBook, iBook readjusts to native display
plugged back in adapter to iBook, immediately recognizes and displays projected desktop.
Scene 2: The FREAKY thing!
Now, I immediately (after unplugging the adapter from the iBook) change adapters to the DVI to VGA adapter and plug the projector into the MacBookPro B, whallla! Back in business. (computer screen adjusted to 800X600, and projector recognized signal).
Now, what about my computer? I unplug from MBP B and plug into MacBookPro A, and NOTHING...the computer doesn't automatically adjust to a new resolution, and the projector doesn't recognize any signal from the computer.
Ahhhh Freak out! Now, I plugged adapter back into MacBookPro B, and now back to NOTHING. MBP B no longer recognizes projector or readjusts it's resolution. Was something somehow corrupted?
Now, I plugged iBook VGA adapter back in, and iBook once again with it's awesome G4 technology (or dated video drivers or something) recognizes the projector in an instant and projects the screen.
Now, logically I try again to immediately unplug the adapter from the iBook and switch adapters and plug back into MacBookPro B-it worked once right? But, sorry, NOT twice. The mystery deepens.
Well, I think, maybe it is because I didn't restart MacBookPro B before attempting the switcharoo from iBook to MacBookPro.
So, I plug back into iBook-projector. And the iBook works immediately again.
I restart MacBookPro B and plug in to the freshly restarted MBP B...HOUSTON WE HAVE LIFT OFF! The MacBookPro B recognizes the projector and the projector kindly displays the desktop.
Now what about MacBookPro A...Last time, when I did the switcharoo, it corrupted something to cause the MBP B not to work. Let's try it again. Will this plug-unplug-restart-switch adapters-immediatly plug in technique work...let's see. I restart MBP A, and plug DVI to VGA adapter in. Sorry. Same ol' no signals recognized. MacBookPro A not auto readjusting resolution, and does not list any projector in display prefs.
Let's get crazy and immediately plug the adapter into the MacBookPro B...it works-oh so logical...NOT! Why wasn't it corrupted this time by MBP A? MacBookPro B readjusts its screen to 800X600 stretched and projector immediately recognizes and projects desktop.
Now lets see if I can break it again as before. I unplug it from MacBookPro B and back into MacBook Pro B, knowing that this caused it to stop working previously. And...it still works-WHAT? I do it a third time. It still works on MacBookPro B.
So,
I plug it back into MacBookPro A...still nothing. Back to MacbookPro B works like a charm. This time it struggles a bit showing that initially it sees a signal from MacBookPro B of 1192X900 (i Think), then the MacBookPro B switches automatically to 800X600 and the projector works.
Wait..I see something amiss! I see in my MBP A menu bar an icon for Labtick which MBP B does not have. I shut down Labtick, plug back in the DVI to VGA adapter and 'Boom' the projector is recognized.
I unplug DVI to VGA adapter and plug back in to MBP A and 'Boom' the projector is recognized again...no it couldn't be!
Well, it is possible it couldn't be because, I shut down the projector, unplug it's power source, plug it back in. I plug it back into the recently working MBP A with Labtick not running, and sorry folks, now the projector doesn't work again. The MBP A does not readjust it's resolution, nor recognize a projector and the projector doesn't recognize the MBP A.
Let's try the projector in MBP B....same deal. Now it doesn't work. Same symptoms of MBP A.
Back to the good ol' iBook. Of course it works.
Now switching over directly to a restarted MBP B. -DOESN'T WORK (as it did using this technique previously)
Now switching over to MBP A- DOESN'T WORK.
As you can see, it is hard even with multiple computers to find a series of doing things that consistently makes the projector work.
Any thoughts, ideas, ways to diagnose? Thanks!

Working with Hi Baud Rates Via 422/485

Similar Messages

Maybe you are looking for