Working with (Indian) fonts in CS4

Hi
Some one please tell me does Photoshop CS4 or (CS3) support Telugu fonts (i,e Anu Script Manager 6 or 7)? If so, how can I possibly use them without any error? if NOT is there any available plugins to support Telugu typing. Please let me know your suggestion.
Thanks in Advance.

The short answer is: yes it can be made to work, although it's not yet officially supported.
You can find all the details in my blog post here:
http://www.thomasphinney.com/2009/01/adobe-world-ready-composer/
Cheers,
T
Thomas Phinney

Similar Messages

Working with Kurdish fonts in IN CS2 ME

Hi! Thank you for taking time to look at this problem!
I work on an iMac and use the InDesign CS2 Middle East version. I have to do a brochure in the Kurdish language. The fonts are very similar to Arabic, reading from right to left..
The person who organized the translation sent me some fonts, but they are TT for PC. When I try them, all I see is the default font from Apple which is Arabic. The Kurds do have some characters that the Arabs don't have.
I found some Kurdish free fonts on the Internet. Some do work, means I can see the real font, but the special characters, which are in the set, don't show. I still get an Arab character instead of the Kurdish. I wondered if there is something to be done in the preferences or the style sheets but I could not find anything. I do have the right fonts I believe, but cannot make them work right. I do have Fontographer, so I can convert them, but that did not help either.
Does anyone know something about this??

I did! still not working
Le Mar 16, 2015 à 06:40, Willi Adelberger <[email protected]> a écrit :
Working with Kurdish fonts in IN CS2 ME
created by Willi Adelberger in InDesign - View the full discussion
Did you install any InDesign CC 2014 MENA version, as you can install it additionally with extra cost?
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7300629#7300629 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7300629#7300629
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in InDesign by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Does the TJ command work with Type3 fonts?

I'm not sure that the text showing TJ works with Type3 fonts.
Attached is a complete PDF file that illustractes the problem. See
how the A characters position are affected by the TJ command when
using the Type1 fonts but not the Type3. Is this a known issue? Is there a solution?
%PDF-1.4
%âãÏÓ
1 0 obj
<<
/Type /Catalog
/Pages 2 0 R
>>
endobj
2 0 obj
<<
/Type /Pages
/Kids
3 0 R
/Count 1
>>
endobj
3 0 obj
<<
/Type /Page
/Parent 2 0 R
/MediaBox[0 0 595.3 841.9]
/Contents 4 0 R
/Resources 5 0 R
>>
endobj
5 0 obj
<<
/ProcSet [/PDF /Text /ImageB /ImageC /ImageI]
/Font
<<
/F0 6 0 R
/F1 11 0 R
>>
>>
endobj
6 0 obj
<<
/Type /Font
/Subtype /Type3
/FirstChar 65
/LastChar 65
/Widths[93]
/FontMatrix[1 0 0 1 0 0]
/FontBBox[0 0 97 107]
/Encoding 7 0 R
/CharProcs 8 0 R
/Resources
<<
/XObject
<<
/Image65 10 0 R
>>
>>
>>
endobj
7 0 obj
<<
/Type /Encoding
/Differences[65 /softA]
>>
endobj
8 0 obj
<<
/softA 9 0 R
>>
endobj
9 0 obj
<< /Length 56 >>
stream
93 0 0 0 93 107 d1
q
77 0 0 107 0 0 cm
/Image65 Do
Q
endstream
endobj
10 0 obj
<<
/Type /XObject
/Subtype /Image
/Width 23
/Height 32
/BitsPerComponent 1
/ImageMask true
/Filter /FlateDecode
/Length 63
>>
stream
x^ûÿhþÿþ1Àÿ?õ dQÿÃÂjì?ÔÈÐ?ùütð?ûajoþßDìÿ À @e
endstream
endobj
11 0 obj
<<
/Type /Font
/Subtype /Type1
/BaseFont /Times-Roman
>>
endobj
4 0 obj
<< /Length 238 >>
stream
q
0.072 0 0 0.072 0 0 cm
BT
/F0 1 Tf
1000 2100 Td
[(AAAA)]TJ
ET
BT
/F0 1 Tf
1000 2000 Td
[(A)100(A)100(A)100(A)]TJ
ET
BT
/F1 107 Tf
2000 2100 Td
[(AAAA)]TJ
ET
BT
/F1 107 Tf
2000 2000 Td
[(A)100(A)100(A)100(A)]TJ
ET
Q
endstream
endobj
xref
0 12
0000000000 65535 f
0000000019 00000 n
0000000078 00000 n
0000000156 00000 n
0000001215 00000 n
0000000279 00000 n
0000000399 00000 n
0000000656 00000 n
0000000727 00000 n
0000000768 00000 n
0000000882 00000 n
0000001130 00000 n
trailer
<<
/Size 12
/Root 1 0 R
>>
startxref
1513
%%EOF

No Mac available ATM. Will do this for you sometime over the
next 3 days.

Working with external fonts and director

Hi,
when working with UTF-8 fonts or other big fonts compiling
can be such a
pain. When having multiple big fonts I could go and get me a
coffee
every time I compile my flash movie.
I use textfields for every font format I use so I could use
it as linked
library member but it does not work when using it in
director.
Does anyone know a solution to this? How to avoid compiling
big fonts?

Hi MK,
No, maybe I didn't express it precisely
It's not about the DB or its vendor, it's about the DB <b>schema</b>.
You can of course reuse the system JDBC driver to create a DS to this external DB, however it cannot be Open SQL (Open SQL is available <b>only</b> with the system DB <b>schema</b>)and therefore usage of SQLJ is not possible with it.
Hope it makes more sense now!
-Vladimir

Will unlocked version of Verizon z30 works with indian networks?

Hi all,
I would like to buy Z30, unfortunately i am not able find this in Andhra pradesh. so i thought of get it from USA, even thers i couldn't find it, finally i am able to find some open stock in Verizon. they are providing unlocked version of Z30.
now my doubts are,
1. will it works in india or not?
2. can i use indian networks with LTE?
Please educate me guys.. i am eagerly waiting for Z30.
I spoke to Verizon, customer, they are not sure with Indian networks, because the Verizon devices are explicitly designed for Verizon network, it wont work with other comapnies. and he tols one intresting thins that Verizon providing services in india also.

It is possible because the price for an unlocked iPhone, and the price for a locked iPhone without a contract commitment is exactly the same. AT&T does not sell unlocked iPhones. If your friend bought it anywhere other than directly from Apple, it is a locked phone, not an unlocked phone. Contact the carrier it's locked to to find out what their conditions are for unlocking. Not all carriers offer unlocking (AT&T does: http://www.att.com/esupport/article.jsp?sid=KB414532&cv=820#fbid=35EsOeMYNgl )

Working with labelled vector graphics (CS4)

I've working with a rather large set of simple geometric vectors.
They've all been created in illustrator, but need to be scaled in InDesign and flow with the text.
The only method I've come up with is somewaht convoluted, so I thought I'd share and see if anyone had any suggestions on how I might improve the workflow.
- vector graphic is pasted (not placed) into InDesign and ungrouped
- strokes are converted (manually) to object styles (graphic styles created in illustrator are lost)
- graphis is regrouped and roughly scaled
- labels are added and paragraph styles applied
- labels are grouped with graphic, cut, and "paste into" anched text box
- re-scaling and label edits are done with select content/container/next object
More complicated graphics will be linked and rescaled in illustrator and relabelled and placed as above.
Is there a better/easier way to do this?
(Maybe CS5 will have a container isolation mode...)

I want to keep the labels out of illustrator, but there are a few graphics with more detail that percentage scaling is the way to go.
It would be far easier if InDesign would respect (i.e. import, map) Illustrator's graphic styles.

Locked 3GS working with Indian Service provider while iphone 4 does not ?

So my friend got a iPhone 3GS from the states and ofcourse it was locked with AT&T but upon reaching here when he inserted his Aitel Sim in it worked without any jailbreak or unlock. On the other hand i recently bought a iPhone 4 with 4.1 stock firmware and 2.10.4 baseband and it does not work with either of the official carriers let it be Airtel or Vodaphone even if we buy a microsim directly from the service provider(Yes they are available here on request).
Why is it so. Also last i heard was that Apple added few more carriers with the 4.2.1 update. If that is to be correct then does a iPhone 4 works here in India with that update without the jailbreak or unlock.
TIA
Naughtie

How is it that your friend got an iphone 3G S from U.S and that how does it work with Aitel Sim? All U.S purchased iphone are carrier locked to AT&T, and there is no official way to unlock them. They only way you can is to jailbreak and unlock it from there but otherwise a non-hacked u.s iphone will not work with other sim card. So it is likely that the phone your friend got is a hacked phone. You can also tell if your friend updates his phone to the latest firmware, that the phoen will go back to normal state and I bet you that the Aitel sim will not work.

Better way to work with AE and Premier CS4

I've read most of what's been said about rendering and planning your work before you begin. However, I have a very large 1 minute AE file that was already created with HD settings. All I needed to do was drag and drop my footage and text - which I did in seconds.
I'm using the 1 minute as an intro to a video I'm creating in Primier CS4, SD 16:9, 720x480 NTSC. My question is:
a) rendering this clip is taking about 4 1/2 hours. Using QuickTime movie, no compression. Remember is HD and HUGE. Should I do it this way?
b) Would it be better to use Adobe Bridge and bring the un rendered project into Premier, choosing Fit to Screen?
c) Would it be better to export it as an HD .avi file, bring it into Media Encoder and downsize the file and THEN import the single .avi clip into Premier?
What do you suggest will give me the most stable and clear one minute intro?
I'm working in Windows 7, 64 bit, 2 hard drives: C and Video. Have the Production Suite. 8 GB Ram. System is 3 years old and was built by a certified Adobe dude.
Thanks for anything you can give me.

As Dave said, confusion everywhere. It's pretty clear that you know little to nothing about AE and thus don't know which levers and knobs to tweak. In so many words, none of your ideas makes any sense, as it's actualyl ridiculously easy to downsize content in AE, eitehr by nesting it in a notehr composition as a layer and using "fit to comp" or scaling it in the output module settings. The rest is neither here nor there -
"stable and clear" are just a matter of perception. Yes, from a technical POV using uncompressed is always a safe bet, but that won't do you any good if you do something silly when scaling the footage. So we're back to square one no matter what. Therefore I strongly suggest you read the AE help and this:
Getting started with After Effects
And yes, depending on what's involved in that template project, the rendering time could be perfectly normal.
Mylenium

Cfdocument doesn't work with my font size

Hi All,
My font size doesn't work inside my cfdocument using css
Here is my code:
In My css file I have this:
body {     font-family:"times new roman";     font-size: 18px;     line-height: 20px; }
The font is a TTF and it shows in my cfadmin as:
Font Family Font Face Postscript Name Font Type Useable In Path
times new roman
Times New Roman
TimesNewRomanPSMT
TRUETYPE
PDF/FlashPaper
c:\windows\fonts\times.ttf
I try using postscript name and the same issue. If I increase the font size it actually reduce the size on the screen.
I'm using windows 2008 with CF8 with the latest hotfix 8,0,1,195765
Any ideas?
Thanks in advance.
Johnny

Don't know why didn't show my code.
Here is the code:
<cfdocument format="flashpaper" pagetype="letter" fontembed="yes" margintop="0.3" marginbottom="1.25" marginleft="1" marginright="1.25" unit="in">
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<html>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" >
<head>
    <style type="text/css" media="screen">
        @import url(assets/css/preview.css);
    </style>
</head>

Working with InDesign CS3 and CS4

I'm a graphic design student and recently bought InDesign CS4 for my home computer, but all the media labs on campus only have CS3. Is there a way I can constantly work on one file, switching from one version to the other? I heard there's a way to save CS4 as a CS3 file, but will a CS3 file open in CS4?

CS4 will open a CS3 file. To go the other way, export from CS4 to INX.
CS3 (if fully patched) will open INX from CS4. Don't use CS4-only
features, and expect to run into some problems with text wrap changing.
Kenneth Benson
Pegasus Type, Inc.
www.pegtype.com

[JS] menuAction.invoke() working with cs3 but not cs4 :-(

Hi,
I wrote a script and chose to call a menu through menuAction.invoke();
I wanted to use an independant locale string to avoid dealing with localization.
It works nice on CS3 but just fails in the CS4.
//I want to fit the window to the spread
var myMenuAction = app.menuActions.item("$ID/Toolbar Fit in Window");
myMenuAction.invoke();
I am really stuck because I have read the indesign CS4 scripting guide carefully on page 119. The given instruction seem to be the same as in the indesign CS3 scripting guide.
I can't see what I did wrong and yet, no way to get it working on CS4. Any hint ?
Thanks in advance,
Loic

Hi Peter and John,
FF is so... tolerant to accept the value of the option as the same as it is displayed in the select list.
where IE is so... prudence, that we have to explictly tell it
ie Post Element Text in IE should be like this
<select id="unit" onchange="TankUnit();" >
<option> -S-</option>
<option value="ml"> ml</option>
<option value="kg"> kg </option>
</select> Units
bye
Srikavi

Working with Typekit Fonts | Learn Muse | Adobe TV

In this video, James Fritz demonstrates how to search, filter, and select web fonts, including the more than 400 web fonts served by the Adobe Typekit® service.
http://adobe.ly/IVWuxl

Thanks Abobe TV and Lynda.com
Now I understand how to add Typekit web fonts to Muse, but I'm not able to browse the full library of Typekit. I currently have a "Portfolio Plan" of Typekit which provides huge selections of font choices, but I see a lot less fonts in Muse_Typekit library.
Would you let me know how do I browse the full Typekit library in Muse please?
Thank you.
Soohun.

Over State and actions not working with buttons in Flash cs4

Hi - I am working on a Flash file and some of the buttons in the document are not working.When I test the movie the hand cursor appears when I hover over the buttons they don't change colour (as specified in the over state) and the actions don't work. Not sure what is going on here as I created other buttons in the same document the same way and they work fine. Thanks in advance.

If you remove the code from the buttons do they react properly to a mouse over interaction?
What is the code that is in place?

Font in CS4 doesn't work in CS6

I have a TrueType font that a friend made me a few years back. It's my favorite font and I use it frequently; however, I recently upgraded from CS4 to CS6 and the font doesn't work properly in CS6. It does show in the font menus, but now in CS6 it's sorted in a separate font category (along with the Arabic fonts at the bottom), and the sample in the font menu is now merely squares in place of characters. There is a Regular and Bold verison of the font and both have the same issue.
What changed in CS6, and does anyone know how I can edit the font to make it work with InDesign again? I know I can just pick a new commercial font, but I have such a back log of work that used that font I'd prefer to just fix the font. This is on a Mac, and FontBook validates the font just fine, other apps (including CS4 also work fine with it), I'm not using any font management software (I use FontBook merely for validating the font.)
Any insight would be greatly appreciated.

Thanks for the reply Peter.
I was able to fix 1 of the 2 problems. The font did in fact have some extraneous language entries in it's name table. I was able to edit those out and now the font sorts in the normal font list, and not in the Arabic font category.
But the font preview feature in the font menu is still showing boxes (instead of characters.) This is where it gets weird... if I go into Preferences and change the Font Preview size from Medium to Small or Large it works correctly. Just not with Medium (the default.) I've tried clearing font caches, etc, but I could at least live with small or large font previews in order to use the font with CS6.
To answer your question, the font does work correctly when setting type; however, if Font Preview is on the font will eventually be automatically disabled and drop out of the Font menu. Relaunching InDesign CS6 brings it back. Turning off Font Preview prevents this from happening.
I wonder what is different in CS6. Other apps work fine with this font (including CS4.) Even apps like Pages that also have font preview in their font menus.

Can import TIFF files but not see or work with images

I previously used Aperture 2 with no problems. I have scanned a large number (hundreds) of negatives using SilverFast current version 6.6.2r2 using a Plustek OpticFilm 7500i scanner. These files are saved as .tif and are all approx 55 MB in size. I was able to view, work with them with no problems in Aperture 2. I can see and work with them in Photoshop CS4, iPhoto, Preview on my iMac and in any program on my PC. However, I cannot view them or work with them in Aperture 3
When I updated to Aperture 3, the scanned files were visible in the preview mode but not otherwise viewable. Another image from a different project would appear or the image was corrupted. I have done everything in Aperture Library First Aid. I have deleted all of my projects, including my vault, uninstalled and reinstalled Aperture 3 and have the same problem. The image is viewable in Browser (preview mode) but either no image or another image shows up in Viewer or Inspector mode. When looking at the Metadata info, the file name is correct but a different version name is being assigned from a different project.
Any ideas are appreciated. I am about to give up on A3 as it has been nothing but problems and unusable since installed/reinstalled.
By the way, JPEGs from camera, cards, etc have been ok. But one of the major goals I have is to capture my old negatives. Unfortunately, the SilverFast JPEG option is not a viable option as not a viewable file by most programs. I have used the VueScan software but have not been happy with the image quality. Besides, I don't want to have to rescan all of these images.

I wanted to give an update to my issue. The originals are 16-bit TIFFs using RGB color.
I spoke with Apple Support. After uninstalling, reinstalling, making a new library, importing, generating previews, regenerating previews, attempting importing after saving as JPEGs, 8-bit TIFFs, 16-bit TIFFs from other programs (all of which are able to import and present the orginal .tif files with no problems, Aperture 2 included), the conclusion was that there must be something wrong with my original .tif files.
I then brought up the only "solution" that had worked to date. That is importing the original TIFF, exporting it (via Aperture 3) as a TIFF and then importing the new TIFF. This has given me usable images and not just the previews. He said that that looked like the only workaround but that it wasn't a problem because of Aperture itself!?
As cumbersome as this process will be, it may be worth it. I have trialed Lightroom 3 (which can handle the originals with no problem), and at least so far, I much prefer Aperture's workflow and organizational approach.

Working with (Indian) fonts in CS4

Similar Messages

Maybe you are looking for