Working with Kurdish fonts in IN CS2 ME

Hi! Thank you for taking time to look at this problem!
I work on an iMac and use the InDesign CS2 Middle East version. I have to do a brochure in the Kurdish language. The fonts are very similar to Arabic, reading from right to left..
The person who organized the translation sent me some fonts, but they are TT for PC. When I try them, all I see is the default font from Apple which is Arabic. The Kurds do have some characters that the Arabs don't have.
I found some Kurdish free fonts on the Internet. Some do work, means I can see the real font, but the special characters, which are in the set, don't show. I still get an Arab character instead of the Kurdish. I wondered if there is something to be done in the preferences or the style sheets but I could not find anything. I do have the right fonts I believe, but cannot make them work right. I do have Fontographer, so I can convert them, but that did not help either.
Does anyone know something about this??

I did! still not working
Le Mar 16, 2015 à 06:40, Willi Adelberger <[email protected]> a écrit :
Working with Kurdish fonts in IN CS2 ME
created by Willi Adelberger in InDesign - View the full discussion
Did you install any InDesign CC 2014 MENA version, as you can install it additionally with extra cost?
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7300629#7300629 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7300629#7300629
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in InDesign by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Similar Messages

Does the TJ command work with Type3 fonts?

I'm not sure that the text showing TJ works with Type3 fonts.
Attached is a complete PDF file that illustractes the problem. See
how the A characters position are affected by the TJ command when
using the Type1 fonts but not the Type3. Is this a known issue? Is there a solution?
%PDF-1.4
%âãÏÓ
1 0 obj
<<
/Type /Catalog
/Pages 2 0 R
>>
endobj
2 0 obj
<<
/Type /Pages
/Kids
3 0 R
/Count 1
>>
endobj
3 0 obj
<<
/Type /Page
/Parent 2 0 R
/MediaBox[0 0 595.3 841.9]
/Contents 4 0 R
/Resources 5 0 R
>>
endobj
5 0 obj
<<
/ProcSet [/PDF /Text /ImageB /ImageC /ImageI]
/Font
<<
/F0 6 0 R
/F1 11 0 R
>>
>>
endobj
6 0 obj
<<
/Type /Font
/Subtype /Type3
/FirstChar 65
/LastChar 65
/Widths[93]
/FontMatrix[1 0 0 1 0 0]
/FontBBox[0 0 97 107]
/Encoding 7 0 R
/CharProcs 8 0 R
/Resources
<<
/XObject
<<
/Image65 10 0 R
>>
>>
>>
endobj
7 0 obj
<<
/Type /Encoding
/Differences[65 /softA]
>>
endobj
8 0 obj
<<
/softA 9 0 R
>>
endobj
9 0 obj
<< /Length 56 >>
stream
93 0 0 0 93 107 d1
q
77 0 0 107 0 0 cm
/Image65 Do
Q
endstream
endobj
10 0 obj
<<
/Type /XObject
/Subtype /Image
/Width 23
/Height 32
/BitsPerComponent 1
/ImageMask true
/Filter /FlateDecode
/Length 63
>>
stream
x^ûÿhþÿþ1Àÿ?õ dQÿÃÂjì?ÔÈÐ?ùütð?ûajoþßDìÿ À @e
endstream
endobj
11 0 obj
<<
/Type /Font
/Subtype /Type1
/BaseFont /Times-Roman
>>
endobj
4 0 obj
<< /Length 238 >>
stream
q
0.072 0 0 0.072 0 0 cm
BT
/F0 1 Tf
1000 2100 Td
[(AAAA)]TJ
ET
BT
/F0 1 Tf
1000 2000 Td
[(A)100(A)100(A)100(A)]TJ
ET
BT
/F1 107 Tf
2000 2100 Td
[(AAAA)]TJ
ET
BT
/F1 107 Tf
2000 2000 Td
[(A)100(A)100(A)100(A)]TJ
ET
Q
endstream
endobj
xref
0 12
0000000000 65535 f
0000000019 00000 n
0000000078 00000 n
0000000156 00000 n
0000001215 00000 n
0000000279 00000 n
0000000399 00000 n
0000000656 00000 n
0000000727 00000 n
0000000768 00000 n
0000000882 00000 n
0000001130 00000 n
trailer
<<
/Size 12
/Root 1 0 R
>>
startxref
1513
%%EOF

No Mac available ATM. Will do this for you sometime over the
next 3 days.

Working with external fonts and director

Hi,
when working with UTF-8 fonts or other big fonts compiling
can be such a
pain. When having multiple big fonts I could go and get me a
coffee
every time I compile my flash movie.
I use textfields for every font format I use so I could use
it as linked
library member but it does not work when using it in
director.
Does anyone know a solution to this? How to avoid compiling
big fonts?

Hi MK,
No, maybe I didn't express it precisely
It's not about the DB or its vendor, it's about the DB <b>schema</b>.
You can of course reuse the system JDBC driver to create a DS to this external DB, however it cannot be Open SQL (Open SQL is available <b>only</b> with the system DB <b>schema</b>)and therefore usage of SQLJ is not possible with it.
Hope it makes more sense now!
-Vladimir

Cfdocument doesn't work with my font size

Hi All,
My font size doesn't work inside my cfdocument using css
Here is my code:
In My css file I have this:
body {     font-family:"times new roman";     font-size: 18px;     line-height: 20px; }
The font is a TTF and it shows in my cfadmin as:
Font Family Font Face Postscript Name Font Type Useable In Path
times new roman
Times New Roman
TimesNewRomanPSMT
TRUETYPE
PDF/FlashPaper
c:\windows\fonts\times.ttf
I try using postscript name and the same issue. If I increase the font size it actually reduce the size on the screen.
I'm using windows 2008 with CF8 with the latest hotfix 8,0,1,195765
Any ideas?
Thanks in advance.
Johnny

Don't know why didn't show my code.
Here is the code:
<cfdocument format="flashpaper" pagetype="letter" fontembed="yes" margintop="0.3" marginbottom="1.25" marginleft="1" marginright="1.25" unit="in">
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<html>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" >
<head>
    <style type="text/css" media="screen">
        @import url(assets/css/preview.css);
    </style>
</head>

PS CS1 serial number does not work with the just downloaded PS CS2. Tech support sent me here.

Have PhSp CS 1 ver. 8.0. Adobe help told me to download and install PS CS 2. My old CS1 serial number is invalid. Adobe told me to check here.

My old CS1 serial number is invalid.
That is correct.
You cannot use your CS1 serial number with the CS2 non-activated version supplied by Adobe at
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
Re-read the instructions at that link. You must use the new CS2 serial number found at that link.

Working with (Indian) fonts in CS4

Hi
Some one please tell me does Photoshop CS4 or (CS3) support Telugu fonts (i,e Anu Script Manager 6 or 7)? If so, how can I possibly use them without any error? if NOT is there any available plugins to support Telugu typing. Please let me know your suggestion.
Thanks in Advance.

The short answer is: yes it can be made to work, although it's not yet officially supported.
You can find all the details in my blog post here:
http://www.thomasphinney.com/2009/01/adobe-world-ready-composer/
Cheers,
T
Thomas Phinney

Working with Typekit Fonts | Learn Muse | Adobe TV

In this video, James Fritz demonstrates how to search, filter, and select web fonts, including the more than 400 web fonts served by the Adobe Typekit® service.
http://adobe.ly/IVWuxl

Thanks Abobe TV and Lynda.com
Now I understand how to add Typekit web fonts to Muse, but I'm not able to browse the full library of Typekit. I currently have a "Portfolio Plan" of Typekit which provides huge selections of font choices, but I see a lot less fonts in Muse_Typekit library.
Would you let me know how do I browse the full Typekit library in Muse please?
Thank you.
Soohun.

Font book or CS2 font problem?

I am using a mac Pro, running OS 10.4.11, w/ CS2. I am having a problem with either font book or CS2. Certain fonts are not viewing correctly when I use them in CS2 programs. I get a font error when I open the file, and when I try to fix the font by choosing the same name again, the font appears as another font entirely (in fact after I closed and reopened everything the font it substituted changed, and if I choose italic it changes fonts again). I do not know if the issue is with font book or CS2, but I have installed around 1500 fonts, and have had some other minor issues when I open files in Adobe programs, with fonts not showing up even though they are installed and enabled. I fix that problem by disabling the font and then re-enabling it and it then shows up in the font list.
So after all that, my question is what should I do? Should I reinstall CS2? Or is the problem more likely cause by font book?
Thanks

Font Book is an inadequate font manager made by Apple for managing the few meger fonts Apple includes with the system.
FAP is a robust font manager made for professionals with thousands of fonts

Which CS Master Suite Products CS2,3,4,5,5.5,6 work with which Mac OSx 10.5, 10.6, 10.7, 10.8?

You have no idea what a journey it has been to try to find the answer to all of this. Here is my stab which is open for input.
Which CS Master Suite Products CS2,3,4,5,5.5,6 work with which Mac OSx 10.5, 10.6, 10.7, 10.8?
- When I recently installed 10.6 on a 10.5 Macbook Pro with CS2 Master Suite, I lost all access to CS2. End of story. Unhappy ending at that.
- I have CS4 Master Suite on a MacPro using OS 10.6.8, but my understanding is that if I go to 10.7, I lose all access to CS4. Another bad solution.
- Apparently the same is true of CS5 and 5.5. If one goes to 10.7, you will no longer be able to use those programs.
- The only Master Suite that is 10.8 compatible is CS6. New price $2,599, or $999 upgrade from CS5 or 5.5.
32bit vs 64bit
And to look at 32 bit vs 64 bit briefly. My CS4 Master Suite for Mac has two 64 bit programs, Premiere and After Effects. The Windows version of the same program also included Photoshop as 64bit.
- I assume that as CS Suites went from CS4 to 5 to 5.5 and then to CS6, that more and more programs take advantage of the 64 bit architecture. I don't know the specifics however. Would like to know.
- Also the MacOS has done the same. The newer the operating systems, the more the system takes advantage of mulitple processors, ram, and 64 bit architecture. Again, not sure of the sweet spot here.
And then there was the cloud!
Not sure what to do with that information.
- Great, new products updates all the time
     - downside, what if the updates outgrow my computer? Size and technology?
     - What if the updates outgrow my system software?
     - What if I want to open a cs4 document 5 years from now?
          - do I have to subsribe forever?
          - if I have CS6 on my computer, do some work, and want to open it 10 years from now, I still have the software and a computer.
     - Cost of $30 a month on a special, but $50 a month normally. Sounds cheap month to month, but after two years of $50, I have spent $1,200 on a product that I don't own!
Anyway, all of this comes up because I have multiple versions of Master Suite. I have multiple computers with various versions, and it all goes to crap if I upgrade the system software, or Adobe no longer supports the older versions. This is my contribution to the discussion. Apparently Adobe support had no archived articles to answer any of my questions, they suggested I look online. Great help. As I say, I don't much trust Adobe as my business partner anymore. I think I will work my way towards CS6 and see how long that takes me with Apple system upgrades. I'm not sure what OS 10.9, and beyond may bring as it relates to Adobe products, but I do need to get past my old 32bit applications running on an 8 core machine with 32gig of ram.
Which brings up one final point. I have Imac with 4 gig ram, Macbook pro with 8gig of ram, and MacPro with 32 gig ram. Will 4 gig ram run Cloud CS master suite? Its a worm hole that just keeps getting deeper! I have to find a place on that slope that is cost effective and allows me to hold my position for a few years until I can see how Adobe treats its cloud cutomers, and how well Adobe and Apple play together.
If you have any links to addtional information about various CS programs and which are ported to 64 bit, that would be helpful. I read some things about Rosetta and Java being the culprits in various upgrades to CS programs and the new Mac OS systems.
Also, if you have any work arounds to get CS5.5 to run on OS 10.7 or 10.8, curious to hear about those as well. As I understand it, 10.8 no longer includes the previous Java or Rosetta applications, but I was under the impression that they could be installed after.

Long story short: Simply get CC for teams. At 500 bucks a year it's a steal and those 5 licenses in the base package (or was it 10 even?) cover all your computers, at least the 3 ones you mentioned. For system requirements refer to the individual product pages.
Mylenium

My Extensis suitcase 11.0.4 is no longer working with my system OSX10.6.8, what is the best and cheapest font management software to use that's compatible with this system and CS software

my Extensis suitcaseX 11.0.4 is no longer working with my system OSX10.6.8, what is the best and cheapest font management software to use that's compatible with this system and my existing CS design software?

If you upgraded to Snow Leopard, then it would seem that Suitcase 11 is not compatible with Snow Leopard and you'd need to buy Suitcase Fusion 3 for $99.95.

[SOLVED] Photoshop CS2 stops working with kernel 2.6.27

after upgrade to 2.6.27 my PS CS2 under wine stopped working with the error:
I tried to downgrade/upgrade/recompile wine (1.1.6/1.1.5/1.1.7) but no impact
I have full copy of my old root partition on hda5 and when I boot to this one PS is working properly
any clue where to look for problems ?
thanks
Last edited by zyghom (2008-10-28 19:52:12)

removing ~/.wine and installing PS CS2 from the scratch solved the problem
wine devs refused this bug anyway ;(

Photoshop CS5 not working with Lucida Grande Regular font

On my iMac Intel Core 2 Duo 2.66 GHz, I am running OS 10.6.7.
When using Photoshop CS5, if I try to use the font, Lucida Grande Regular, it causes an error.
"Could not use the type tool because of a program error."
When I try to open an existing file that has type layers that include the font Lucida Grande Regular, Photoshop will not open the file. I have several of these files that I want to use. I can open them on another Macintosh and everything works fine.
First I get a message window that says, " Some text layers might need to be updated before they can be used for vector based output. Do you want to update these layers now?" I click on update and then get the following message. "Could not complete your request because of a program error."
I have updated Photoshop CS5 to the latest version, 12.0.4.
I have run the FontTest.jsx script and it shows an error for Lucida Grande Regular.
(IOError: General Photoshop error occurred. This functionality may not be available in this version of Photoshop.
- <no additional information available>)
The other 100+ fonts on my machine did not create errors.
Since Lucida Grande Regular is an essential font for Mac OS X, I re-installed OS 10.6 in order to have a new version of Lucida Grande Regular. After that re-install I am having the same problems with the font not working in Photoshop.
It also does not work with Adobe InDesign CS5. The font does work in Microsoft Word.
The program Font Book verifies Lucida Grande Regular.
Other fonts including, Lucida Grande Bold, work fine in Photoshop and InDesign.
What can I do to get Photoshop CS5 to work with Lucida Grande Regular?

Wow, I'm so glad I found this thread. This problem has been dogging me for years, and it's so sporadic that I've been afraid of breathing the wrong way lest I somehow incur that diabolical Program Error dialog. I'd managed to reach a truce with Photoshop CS5, getting it into a barely working state, and avoiding all updates... until Lion came along today. Then I updated to CS5 12.0.4, and the Program Errors were back again.
Now I see that the problem does seem to be related to the Lucida Grande font. If there's a layer with that font in it, not only can I not edit that text, but I can't marquee select anything, nor drag any shapes. Deleting caches and massaging fonts are completely ineffectual measures... but if I delete the Lucida layers entirely, we're back in business.
At least so far.
Funny to think that of all the innovations I'd like to see Photoshop adopt, the fixing of this one issue is the thing I'd like to see most. I'll be keeping my eye on this thread, and any updates by Mr. Cox.

Reader X : Wrong Fonts (was working with Reader\Pro 9 and Pro 10)

Hi all,
First : this form pdf work with adobe Reader 9 and Acrobat Pro 9\X
i did a pdf form with scribus, i embed 2 fonts : 3of9barcode and freemono bold fonts.
(compatibility PDF 1.5 (acrobat 6) )
My client update to Reader X and the problem is that the fonts are 'squares' and the barcode is text not barcode.
When i do look at the properties in reader X, it founds the embedded fonts. There is no error when opening it.
no console errors or Reader error.
If i open the document with Pro X , there is no problem, the fonts are good. i try to save a copy, an optimized copy, or a copy with limited rights,
but the result is the same, when i open the pdf with Reader X the fonts are bad.
i tried ton install the fonts on Windows but it does not help...
Do you have any clue ???

I have exactly the same problem!!!
I create and layout my forms in scribus and adjust them in Adobe 9 Pro. Setting the tab order and having the possibility to make fillable forms saveable are gorgeous. However, people who use ReaderX cannot work with these very forms anymore because there appears only squiggly squary rubbish in the fillable form fields instead of nice and clean Times Now Roman font. In Reader 9 everything worked fine. I cannot force everybody to go back to version 9, in order to be able to work wth the forms.
It's so annoying, please help.

I've been working with documents in pages and recently downloaded word for mac. i open the pages documents and they appear to be corrupt. at least, a lot of the font is now in weird boxed pictures. what do i do?

I've been working with documents in Pages and recently downloaded Word for Mac. Upon opening Pages documents with Pages, the documents appear corrupt. Much of the font has been replaced with boxed little pictures - yet they are identified as times new roman. What do I do?

You got the new iphone????? I have same problem. I transferred audiobooks to device to find no audiobooks on device (despite it being in iTunes as if it was). Have you found a solution????? I even tried to change import settings on format transfer but hasn't worked.

Why FONT Parameters at SET_CANVAS_PROPERTY Built-in doesn't work with me ?

after I had a look for the SET_CANVAS_PROPERTY Built-in References :-
http://www.oracle.com/webapps/online-help/forms/10g/topics/f1_help/builts/setcspro.html?tp=true
I made a Push button at content canvas and within this code on it , which doesn't make any change to any text at the canvas :-
SET_CANVAS_PROPERTY('FONT_CANVAS',FONT_NAME,'Comic Sans MS');
NOR
SET_CANVAS_PROPERTY('FONT_CANVAS',FONT_SIZE,40);
ALL of them :-
FONT_NAME , FONT_SIZE , FONT_SPACING , FONT_STYLE , FONT_WEIGHT
not working with me .......... I just wondering .... why ?!
I'm using DB 10gR2 , Developer Forms 32 Bit Version 10.1.2.0.2 (Production)
and Windows XP SP2 64-bit

The FONT-attributes for a canvas are for the "Tab-Titles" when using Tab-Canvases. They have nothing to do with boilerplate-texte placed on the canvas.

Working with Kurdish fonts in IN CS2 ME

Similar Messages

Maybe you are looking for