Working with layers with centered page

Is it possible to work with layers (Draw Layer) when you want
your site to
be centered. So far I´ve worked with centered (middle)
Layout Table, but
then I have to work with Laoyt Cells - i.e. I cannot use
layers.

Of course you can use layers with tables. Just work in
Standard mode, not
layout mode to do that. And please take the time to learn
about layers
before you use them -
http://www.great-web-sights.com/g_layerlaws.asp
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"ojorus" <[email protected]> wrote in message
news:epckvr$spo$[email protected]..
> Is it possible to work with layers (Draw Layer) when you
want your site to
> be centered. So far I´ve worked with centered
(middle) Layout Table, but
> then I have to work with Laoyt Cells - i.e. I cannot use
layers.
>
>
>

Similar Messages

How can I make a PDF file from each folders with layers, where each page is a each folder?

How can I make a PDF file from each folders with layers, where each page is a each folder?

I found an answer to my own question. A work around of sorts.
Download Photoshop Elements 6 for Macintosh. With PSE6 I made a slide show with 550 images 1920x1200, without thumbs. I ran into one problem making the slide show. My images contained 4 images which had not ben created by Photoshop and could not be included in the slide show. Opening the images in Photoshop CS4 and re-saving them still did not make then acceptable. Not a big deal. I probably could have fixed the four images by stripping all EXIF data before opening them in Photoshop. BTW, PSE6 made the slide show in demo mode.
I hope the bug in Photoshop CS4 will be fixed in Photoshop CS5.

Export to PDF from Autocad: Acrobat always opens PDF with 'layers panel and page' shown.

Hello,
Whenever I export to PDF from Autocad, Adobe Acrobat opens the PDF with the 'Layers Panel and Page' shown.
Each time I have to manually go to 'Properties' and select 'Page only', close 'Properties' and close the PDF and select to save the changes, in order to show the just the page.
Is there a way to make PDFs always export to 'Page only' automatically as default?
Thanks!
Ione

Thakns Peter, I had seen this thread, but it doesn't really address my issue. I've exported individual chapters from the book file, all with success, so I know there isn't a file corruption issue. The problem seems to do more with memory allocation/usage.
I have tried: quitting and then immediately exporting the file, and even rebooting and then relanuching and exporting. Both of these allow me to get a few pages farther along, but still not through the entire book.
I remember back in the day there used to be a setting for how much RAM/dis c space was allocated to a certain applicatino (I knowm it was a long time ago). I didn't know if there might be something like this hidden somewhere

Working on layers with Photoshop Elements 10

Does Photoshop Elements 10 allow you to edit layers on something created in Photoshop? I have a map that is comprised of 4 layers that I'd like to edit.

Layer groups - Can't change handle individual layers in a layer group (for example, when working on file created in full Photoshop). Ungroup layers for this.
Supports only adjustment layer masks.
There are other differences from PS which I found nicely mentioned at http://simplephotoshop.com/photoshop_elements/photoshopelements_vs_photoshop.htm.
Hope it helps.
Thanks,
Garry

Photoshop elements 4 HELP with layers with layers

hello all I got photoshop elements 4 not to long ago and ive been playing with it but i just cant seem to grasp how to use layers.I would really appreciate any help anyone can suggest.Is there anywhere i can watch someone use layers? That would really help if i could see it being done. I bought the missing manual book and it seems really good, but i still dont understand layers. Thanks for any help.

Charles
As a start you can try the imbedded help that comes with the program. Use the "help" box in the top right hand corner and type in layer. Then follow the links in each section. I'm using pse3, one version prior to yours. I have been using the program on and off for a year and I find that only just now I'm starting to use layers more often. I also on occasion "Google" photoshop elements "layers" which will take you to many sites where you can read more. It's an exhaustive topic and one that I find comes more easily as I use it.
Also use the adobe search engine at this site and type in "layers". You can read up on what other people have learned in the various threads.
I also have the Missing Manual and two other books. I find they are good but seem even better after you work away at various photos. Nothing like hands on. Just remember to keep an original of your file.
cheers
Neil

Working with layers from InDesign to Acrobat

Hi, I'm currently creating a fairly large pdf document for a client which has pop-up effect windows in Acrobat. The artwork is created in InDesign and the file is exported as an interactive pdf with layers. In Acrobat I then make these 'pop-ups' visible then invisible when hovered over/moved away from respectively. I was at the finished stage, all interactive elements that couldn't be set in InDesign had been meticulously added in Acrobat. Twice now, however, my client has made a small change to one of the pages that has several of these layer effects on it and each time I replace the page in Acrobat I have to re-do all the interactive parts. My question is: Is there a way you can replace a page in Acrobat and retain the layer interactivity that existed on the original, outgoing page? It seems impossible as whether I delete the page first and insert the new one in its place, or alternatively do a straightforward 'replace', the outgoing page's layers are deleted with the page and the incoming page's layers come in - but with none of the interactivity. I have to set it all up again. Bear in mind these are interactive events that can only be set up in Acrobat, not in InDesign, and I suspect that's where the problem lies. The new completely wipes out the old. Does anyone have any advice on a work-around for this - or should I just go and open the wine early, take a deep breath and re-do all the interactivity for the third time? Many thanks for your time, whether the news is good or bad

If you need the black text to wind up on a separate printing plate from the black in the 4-color images, you will need to create a spot black, and set all your text (and table rules that will change) into that spot black.
I use this method to keep the pricing in my catalog separate, so I can print one version with prices, and one without.

Working with layers | Learn Photoshop Elements 11 | Adobe TV

In this movie, author Jan Kabili discusses using layers in the Editor workspace in Photoshop Elements 11. Jan explains what layers are, why you might choose to use them, and how to create and work with layers in the Layers panel.
http://adobe.ly/SBQu3E

I have downloaded & installed flash player at least 4 four but your programs do not find it. What do I need to do?

Working with Layers | Learn Photoshop Elements 9 | Adobe TV

With layers, you can work nondestructively and save all of your creative ideas in a single file. Learn about the various options in the Layers panel and how to harness the true power of Photoshop Elements by working with layers.
http://adobe.ly/ynakt0

What is the best way to work on photographs, editing them, and preparing for print if I can't save layers as .jpg or non-layered .tiffs? The photo lab I will be using does not allow layered .tiff. I have seen many videos that show how to let's say enhance eyes using layers, but in this video it says that .jpg cannot be used. I am new to photography and PSE an would like to know if there is an alternative way to edit an image that can be saved as .jpg. Thank you!

I am running Windows XP, SP3. I have tried to run Firefox 4 several times but it doesn't work properly. The main page comes up showing the logo, below that is the search box, and below that is another box with nothing in it.

I am running Windows XP, SP3. I have tried to run Firefox 4 several times but it doesn't work properly. The main page comes up showing the logo, below that is the search box, and below that is another box with nothing in it.

The external DVD/CD Writer will Not appear on your desktop when you attach it to your iMac. It will appear in "Finder", which is in your Dock.
Hope this helps

Can photoshop elements work with layers/on a Mac?

Hi,
I would like to purchase photoshop elements 11 if the program allows you to work in layers. I use to have photoshop 7 but since I changed my computer to a Mac I need a program that is compatible with the Mac. Is photoshop elements 11 compatible? I have been trying to get this information for quite some time. No one seems to be able to help me in the stores. Maybe you can. Pleaseeeeeeeeee. Thanks you
Nanette Murray

Photoshop Elements 11 is definitely available for the Mac.
And it definitely has layers.
If you want, you can download the trial which is the complete version but only works for 30 days. You can then judge if you like it and then buy it.
http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us

Printing from web pages is excruciatingly slow with most recent upgrades of Firefox .Use an iMac and an HP officejet printer. Printer works fine with Safari and woodprocessed files, but not with Firefox and web pages.

Printing from web pages is excruciatingly slow since downloading most recent upgrades of Firefox Mozilla. I have a desktop iMac, OS 10.6.8, and an HP officejet printer 4500 G510n. The printer works fine with the Safari Browser and with woodprocessed files, but not with Firefox and web pages. Help please! It used to print fast with earlier versions of Firefox.

Hello and welcome to the Apple Discussions Forum.
I have hardly any experience with HP printers but since your posting has not been replied to yet I thought I'd offer some assistance.
With the printer status and ink levels working, it shows that you have a connection to the printer. So I would look at the issue being with the protocol being used for the print queue on the Mac.
Since you have XP and Vista working, I would check the printer queue configuration on either box. In XP, go to the Properties and select Ports. Click the Configure Port tab to view the connection. If you are using RAW, then this is known as HP Jetdirect-Socket on OS X. So if you are not sure what protocol was used before I would create another printer queue, this time selecting IP > HP Jetdirect-Socket. Then enter your IP address and select the K5400dn from the Print Using menu.
If this still fails to print then please reply. There may be limitations with adding the HP driver this way that I am not aware of. There may also be other driver options you can look at, such as HPIJS. If Greg Sahli reads this posting he has expert knowledge on this matter and will be able to offer some guidance.
PaHu

Help with Layers

Hi,
I need some help with Layers? Here is a link to a simple page
layout with 1 blue table, and 1 small green box. Both have a
capital "I" on the left. The table was aligned to "center" in DW.
http://sfrcreations.com/tbe.html
When I built this page at home, on my tiny 12" monitor, the
letters lined up over each other. When I look at it on larger
monitors, they no longer line up. I did have a suspicion that this
would happen due to my lack of knowledge of layers. So, my question
is. How does one, with a centered table, get a layer to always
appear where the designer wants it to no matter what the browser
size is. For instance if you move the browser to different sizes,
the blue box follows, but the layer stays where it is?
Are the menus on this forum site and the Adobe site in
general done by using layers? I ask, because if so, this site is
centered, and the layers seem to adjust to any browser size.
By the way, I am using Dreamweaver 8.
Thanks for any help!

8). I'm a shameless thief.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Nadia : **AdobeCommunityExpert**"
<[email protected]> wrote
in message news:[email protected]...
> Took the words right out of my mouth - thanks Murray ;-)
>
> Nadia
>
>
> "Murray *ACE*" <[email protected]>
wrote in message
> news:[email protected]...
>> The wrapper div is relatively positioned and auto
centering with a fixed
>> width. This has two consequences. Being auto
centering is obvious. The
>> relative positioning is not.
>>
>> When an element is relatively positioned, it takes
its position from its
>> location in the flow of the code. Since the wrapper
is the first thing
>> on the page (wrapping everything else) its position
will be at the top of
>> the page (unless you would apply top page margins,
or top margins on the
>> wrapper), and centered (since relatively positioned
elements *can* move,
>> unlike absolutely positioned elements). Now - since
it is relatively
>> positioned *IT* will serve as the point of reference
for all internal
>> absolutely positioned elements. That's because the
definition of
>> absolute positioning is that its position is
calculated from the location
>> of its closest positioned ancestore.
>>
>> Thus, as the relatively positioned wrapper 'floats'
to the center of each
>> different browser viewport, all internal absolutely
positioned elements
>> are forced to 'float' along with it (I use 'float'
in quotes to indicate
>> that I am NOT talking about CSS floats, which are
very different
>> creatures than what I am describing).
>>
>> That's why it works.
>>
>> --
>> Murray --- ICQ 71997575
>> Adobe Community Expert
>> (If you *MUST* email me, don't LAUGH when you do
so!)
>> ==================
>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>> ==================
>>
>>
>> "engmix" <[email protected]> wrote
in message
>> news:[email protected]...
>>> Hi Nadia,
>>> Could you please explain how you designed this
layout with some degree
>>> of
>>> detail. I could easily cut and paste your
layout, but I really want to
>>> understand how you went about it. What did you
start with and so on.
>>> Hope this
>>> isn't to much to ask?
>>>
>>> Thanks again!
>>>
>>
>>
>
>

A Problem with Layers

I am having a problem with layers in different browsers. I
have a menubar with some drop-down items. Some of these need to
fall over other page objects such as GIFs. The problem is that in
order for that to render correctly in IE, I have to set the z-index
of the GIF to -1. However a GIF set to -1 doesn't render at all in
Netscape. If I set the z-index to 0 it works fine in Netscape but
not in IE. Has anyone dealt with this problem???

Ugh. You are in deep doody.
Your only option now is to hack mm_menu.js, and change all
instances of -
z-index="1"
to -
z-index="99"
But - perhaps it would help if you read what the 'author' of
that menu code
(he adapted it, actually) says about the menus -
http://www.losingfight.com/blog/2006/08/11/the-sordid-tale-of-mm_menufw_menujs/
In addition, this page will show you the potential problem of
building with
only layers -
http://www.great-web-sights.com/g_layer-overlap.asp
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"glen_nicholls" <[email protected]> wrote in
message
news:enm2cp$de7$[email protected]..
> Yes, everything on my page is in layers. Is that OK?
Also I created my
> menu in Fireworks.

Server Side Includes not rendering correctly in Firefox with Layers

Hi
The server side includes are not correctly rendering with layers in firefox. From my site here:-
http://www.osteriastecca.com/index.php
the home_page.php content renders above a layer on the index.php page. Initially I thought this might be a Flash layer issue but the wmode is set correctly to transparent and it works fine with a normal ssi. It also works fine in Firefox without a server side include as you can see here:-
http://www.osteriastecca.com/index_old.php
Works fine in IE and Safari, but not Firefox.
How can this be rectified?
Regards
Glennyboy

What testing server setup do you have? Are you using something like WAMP?
What do you see on screen which tells you the SSIs are not rendering? Any error message?

Frustrated with layers

I know this is so simple but I can't get it to work. what I want is to have a plain background color with either a picture over that is faint or a pattern that is lighter these are not the focal points then i want to add a few photos but would like to feather or rough up the edges so they don;t ;look like i just dropped them in and maybe a some other graphic like an animal or flames etc. and some text. please any help would be great. thank you in advance. Susan

Since you mention being frustrated with layers, I assume you are having problems getting several images into the same document.
Start by reading through this tutorial which shows how to open and get more than one image into a document.
http://www.alibony.com/pse/070308copy.html
You might also find some useful info on this page...top part anyway.
http://www.alibony.com/pse/022108collage.html
jazzyroses13 wrote:
I know this is so simple but I can't get it to work. what I want is to have a plain background color with either a picture over that is faint or a pattern that is lighter these are not the focal points
Use opacity in the layer's palette to reduce this image or pattern's transparency.
jazzyroses13 wrote:
add a few photos but would like to feather or rough up the edges so they don;t ;look like i just dropped them in
One way would be to use this layer in a clipping mask...also known as a clipping group. See this tutorial on clipping masks/groups that includes several ways types of bases.
http://www.photokaboom.com/photography/learn/Photoshop_Elements/layers/layer_groups_clippi ng_masks/1_layer_groups_clipping_masks.htm
jazzyroses13 wrote:
I know this is so simple but I can't get it to work. what I want is to have a plain background color with either a picture over that is faint or a pattern that is lighter these are not the focal points then i want to add a few photos but would like to feather or rough up the edges so they don;t ;look like i just dropped them in and maybe a some other graphic like an animal or flames etc. and some text. please any help would be great. thank you in advance. Susan
Personally, I prefer using a solid color fill adjustment layer as the base in the clipping mask. (You'll find this option in the layer's palette under the black and white icon. It'll be one of the options in the menu list.) Drag out the rectangular marquee in the mask of the solid color fill adjustment layer. With the mask layer selected in the layers palette, fill it with black paint. Invert the mask (ctrl + I on PC; cmd + I if on a mac). You can use the free transform command (Ctrl + T on PC; Cmd + I on Mac) to resize the masked area.
Some edge techniques...
If you desire to soften the edge, apply the gaussian blur filter. If you want a spattered edge, apply the spatter or sprayed edges filter to the mask...can also try using other filters that work in grayscale which will be the only ones not grayed out. (Note: You could apply the filter(s) to the rectangle first then invert the mask if you prefer). Another method is to use the brush tool and paint in the mask...thick heavy brush set is a good choice. (Note: Use black paint to hide (the image); white paint to reveal (the image); and gray will be semi-transparent (think feathering).
Edit: You don't have to use the rectangular marquee...can use circular or any selection for that matter.
Info on the type tool can be found here.
http://www.photokaboom.com/photography/learn/Photoshop_Elements/type_tool/1_type_tool.htm
You'll most likely want to have your type in the topmost layer(s) of the stack in the layers palette so you don't cover them up with your images. Use move tool to move graphics and type into desired location. You'll find using the grids and/or guides useful in planning out your image.
There's a video on using a scrabook kit (Quick Page) here that might be useful as it shows how things are stacked when building a page:
http://www.alibony.com/video/video-lesson34.htm
For the transform command (resize and rotate), she's using Ctrl + T on PC (cmd + T if on mac) instead of using the menu Edit<Free Transform. I thought I'd add that so you don't get lost with how she's doing that.
Another tutorial on using quick pages:
http://graphicssoft.about.com/od/digitalscrapbooking/ss/howtoquickpage_10.htm
I think there might be some of these included with Elements. I don't have a recent version of Elements so I'm not 100% sure where they are located but I'm thinking it's in the Organizer.

Working with layers with centered page

Similar Messages

Maybe you are looking for