Working with Logic Express and Sibelius Student

Help! I just downloaded Sibelius 6 Student edition and my Logic Express 9 files are playing back with all voices as piano. What's the fix?

Hi,
you probably have to change the program select value at the start of each MIDI track and/or select another MIDI channel for this track.
Fox

Similar Messages

I have East/West Symphony. Will it work with Logic express and do I have to have that little red usb drive in the computer to authorize it?

I have East/West Symphony.
Will it work with Logic express and do I have to have that little red usb drive in the computer to authorize it?
Also, would it work with Garageband??

Thanks-that's the same driver I'm using now.
The M-audio techs were unable to tell me if Quattro would work with LE8, so I've been wasting my time and money trying to make it work.
They also gave me conflicting opinions as to whether or not "tip" polarity was an issue when using an after-market adapter. One said definitely yes, one or two others said definitely no.
Their phone tech line has a 20 to 40 minute wait when I call. The online support system is confusing, which even they admit. I don't think my next interface will be from M-audio.
Thanks very much for the response, it helps me get beyond this phase.
Is the Quattro of any use for anybody else (i.e., can I sell it or give it away)?

Does mainstage work with logic express 9

hi , do all the features and plug-ins work with logic express 9 or are some features disabled .
or are they not compatible at all
thanks

I have just spoken to two supervisors and 4 underlings about this exact concern and they ABSOLUTELY REFUSE TO BUDGE in regard to a sidegrade or smaller upgrade fee. I have been a loyal Mac user, ****, an EVANGELIST since 1990, spent well over 100 grand on the apple products I needed and I tried being super polite, explained that I had barely had a chance to learn a thing about Express since I bought it in the store after realizing that there was no way I could afford the Logic Pro 9 box sitting next to it.
THE ANSWER IS IF YOU WANT THE NEW, CHEAPER VERSION OF LOGIC PRO 9 AND MAINSTAGE, YOU NEED TO TOSS OUT YOUR ALREADY CANCELLED LOGIC EXPRESS 9 DISKS, FORGET YOU BOUGHT THEM IF YOU CAN, AND, IF YOU WERE DOWNSIZED LIKE I WAS 3 YEARS AGO BECAUSE MY BACK GAVE OUT...
GO AHEAD. SEE IF YOU CAN KEEP YOURSELF FROM THROWING UP WHEN YOU HIT THAT PURCHASE BUTTON ON THE TWO PROGRAMS THEY REDUCED IN PRICE.
REMEMBER, THOUGH...IT IS NOT LOGIC STUDIO YOU ARE GETTING. THEY SPLIT THE BOX UP SO THE REMAINDER OF THE SOFTWARE IN IT WENT INTO FINAL CUT PRO. THE ORIGINAL BOX YOU CAN STILL GET FOR $500 UNTIL THEY SELL OUT.
DON'T SHOOT THE MESSENGER. THIS IS ONE ANGRY EX-EVANGELIST WHO NO LONGER HAS ANY REVERENCE LEFT FOR APPLE. I GUESS WHEN THEY LOST STEVE, THEY LOST TOO MUCH. SOMETHING IS VERY, VERY WRONG ABOUT THIS POLICY. SCREW THE PEOPLE WHO SPENT THE WHOLE AMOUNT, NOBODY AT APPLE REALLY CARES ABOUT ANYTHING EXCEPT WHAT IS LEFT IN YOUR WALLET.
SORRY FOR THE RANT, BUT I AM IN SHOCK AFTER THE LAST TWO HOURS OF TRYING TO GET THEM TO SEE HOW WRONG THIS POLICY IS.
WE HAVE BEEN SHAFTED, BIG TIME. IN THIS ECONOMY, THAT IS ONE HUGE INSULT IMHO.
GOOD LUCK EVERYONE.

Help Required Please with Logic Express and Yamaha O1X

Hi, I'm a new Logic and Mac user. I have just installed Logic Express and I am trying to get my Yamaha O1X mixer/ interface to work. I have the MLAN Tools installed and I can load a demo song into Logic. The meters on my Mixer are moving, I just cannot hear any sound. Doesanyone know the correct way to set this up to work correctly??
I Mac 20" Mac OS X (10.4.9) Intel Dual Core 2.46 Ghz with 2GB Ram

Answer these questions for me:
Is the Monitor A/B switch green or off?
Do you have the faders 1/2 raised on the 01X in the INST tab, and is the Stereo fader raised?
Where is your amp/speakers connected to on the O1X?
Should be connected to monitor L/R out with the A/B switch off (not green).
If you load the logic demo are the meters moving?
Is Logic selected as your DAW on the O1X utility tab?
In your AMS settings....MLAN should be selected for the inputs and outputs
Make sure you did This!!!!
To monitor your computer's audio outs via the 01X go to the surface of the 01X. In the upper right click INTERNAL MODE (2nd button from left, top of the 01x next to REMOTE).
Go to the right of the 01x there are 5 white buttons for
AUDIO/INST/MIDI/BUS/AUX/OTHER. Choose INST - bring up the faders on Channels 1 and 2. Pan them left and right by clicking PAN (one the surface of the 01X in the PAGE area once, then using the knobs beneath the green screen mLAN 1 and mLAN 2 and spinning the knobs left and right), and control your master volume with the master fader. Use the headphone volume to adjust output level.
Very important......if you did all of this, play a song from itunes see if there is audio if not you have something connected wrong.
If you get it from itunes and not logic....then we need to look at logic!
You need to run logics setup assitant and make sure in the controller setup the O1X is showing! Click rebuild defaults in the controller tab of logic....you should see the faders move!
let me know....i will stick with ya till we get it working.
Craig
email me @ [email protected]

How can I get an old Casio CTK-593 to work with Logic Express?

Title pretty much says it all.
I have a Fast Track USB from M-Audio to connect it to my pc but I don't know how to get it working with Logic.
Thanks in advance.

Did you check your connection with the audio-midi-setup.app in the programs/utilities folder of your MAC (not "pc" pls)?
If you have a working MIDI connection, you'll need to open up a software instrument track within Logic to play Logic's instruments via your keyboard.
Fox

How to work with Logic Express 8 and Garageband 11 v.6.0.4?

I just installed Logic Express 8 and I don't know what it's done to my existing Garageband files - they seem to have been overwritten into Logic folders. I don't seem to be able to open them in either program. I'm sure there are answers buried in the files here, but I'd appreciate a quick How To, please! Can't work.

You need more to be sure the Digidesign core audio drivers are installed for your MBox, which are separate from the firmware upgrade.
A standalone installer for the OS X (10.4) drivers can be found at:
http://www.digidesign.com/index.cfm?langid=100&navid=54&itemid=24268
While I'm glad to hear you're using Logic, your iMac should have no problem running ProTools LE. The current version, 7.3, has universal binary support for the new intel Macs .... dependign on the version you have, though, you may need to pay a small amount to upgrade to 7.3 The updaters for 7.3 also include the core audio driver package I mentioned above, and the ProTools LE 7.3 updaters can be found at:
http://www.digidesign.com/index.cfm?navid=3&langid=100&eid=170&categoryid=36

Mobilepre audio interface not working with logic express 8

I have been using an M-AUDIO usb interface for garageband for the last year,i recently installed logic express 8 and i just can't get any sound whilst trying to record,logic displays a signal in the channel strip but no sound comes from my monitors,only when i plug the ear phones into the interface can i hear what i'm recording.I've tried every trouble shooting option in my apple pro training book like monitoring and audio preferences.I've contacted M-AUDIO but they just put me on hold as if there really busy!!!
in the end M-audio emailed me and blamed logic,they told me to contact apple,W@**ERS!!
I'm new to this apple discussions business and hope someone can help!!
ps the interface works fine with garageband
cheers c

callummccall wrote:
I have been using an M-AUDIO usb interface for garageband for the last year,i recently installed logic express 8 and i just can't get any sound whilst trying to record,logic displays a signal in the channel strip but no sound comes from my monitors,only when i plug the ear phones into the interface can i hear what i'm recording.
Welcome to the wonderful world of M-Audio!!! Now, what you are doing is perfectly NORMAL. You need to hook up speakers to your audio interface. Where the little diagram says so:
http://www.m-audio.com/layout/imgview.php?i=/images/en/connectivity/big/mobilepr eusbcd779px.gif
See? The reason this is so, is because when you are using this interface, you are BOTH using the inputs AND outputs. Logic always works like this, it is a requirement to use "a full-duplex sound card" which means a sound card that has inputs and outputs.
I've tried every trouble shooting option in my apple pro training book like monitoring and
audio preferences.I've contacted M-AUDIO but they just put me on hold as if there really busy!!!
in the end M-audio emailed me and blamed logic,they told me to contact apple,W@**ERS!!
I'm new to this apple discussions business and hope someone can help!!
ps the interface works fine with garageband
cheers c
M-audio blaming everyone else is not new, however, your "issue" is a user issue, not a gear issue.
Cheers

Is macmini enough for a musician that works with logic pro and 10 plugin softsynth at the same time?

I use to work with a music platform like garageband or logic pro and at the same time I am working with a lot of plugin software like toontrack, ik multimedia, musiclab, native instruments etc. On my PC which has the same specification as macmini i7 2.3GHz this was a big problem especially when I was selecting effects like reverb, chorus or compressor so I had to export tracks all the time. What is the minimum specs that I should have to work without any problem? Any help will be appreciated.

Welcome to Apple Support Communities
For what you want the Mac, the Mac mini is OK. It has got a quad-core processor that will give you the performance you need and 4 GB of RAM that you can extend to 16 GB, apart from a removable hard drive.
The problem is the GPU, but as the applications you are going to use don't require the best GPU, it will work properly. If you want the Mac mini, go for it. An iMac may give you better performance, but the Mac mini is correct.
If you buy it from Apple, you have 14 days to return the Mac mini if it doesn't work correctly with the apps you need

Old USB Quattro interface--will it work with Logic Express 8?

I have an old m-audio USB Quattro interface (4in/out) which I used with Cubase years ago. I have it hooked up to my wife's intel iMac with more than enough RAM. Logic seems to run fine, but I get a very weak signal through the interface. Apparently I have the correct driver. I don't mind buying a new interface if this one is not going to work, but the hard part may be in determining whether or not it will work. M-Audio doesn't seem to know (I'm less than thrilled with their support). Any experience or thoughts on this?
thanks!

Thanks-that's the same driver I'm using now.
The M-audio techs were unable to tell me if Quattro would work with LE8, so I've been wasting my time and money trying to make it work.
They also gave me conflicting opinions as to whether or not "tip" polarity was an issue when using an after-market adapter. One said definitely yes, one or two others said definitely no.
Their phone tech line has a 20 to 40 minute wait when I call. The online support system is confusing, which even they admit. I don't think my next interface will be from M-audio.
Thanks very much for the response, it helps me get beyond this phase.
Is the Quattro of any use for anybody else (i.e., can I sell it or give it away)?

Groove Agent 2, can it work with Logic Express 8?

I have Logic Express 8, and Steinberg Groove Agent 2. I was able to install it, but when I open Logic Express 8, Groove Agent 2 is not in my list of instruments.
When I installed Groove Agent 2, it did not ask me for my activation code, which I thought was strange.
Groove Agent 2 is an AU.
I have a White MacBook, 2.1 Intel, 4gigs RAM, and Leopard 10.5.8
Thank you in advance

I used to use GA2 on my PC (before I became a Mac user). Once I bought my Mac I got rid of my PC.
But the disc I have for GA2 has both the PC and Mac version on it, so it was working on my PC, but not on my Mac.
When I try to start it use it as a standalone on my Mac, it starts to load, then a message window appears and says: "No protection device is connected".
I never had this problem when I used to use it on my PC.

Getting Apple Loops to work with Logic Express 7.01

i have logic express 7.0.1 and loads of apple loops. Cant get them to appear in the loop browser in Logic express. Can anybody please help?

Drag and drop the folders into the loop browser.

How do I know "Roaming Network" is working with Airport Express and Airport Extreme and should I use extended wireless network for third Express?

Attempting to eliminate a dead spot in Wifi coverage [and implement AirPlay] have one Airport Extreme 802.11n and two Airport Express 802.11n's.
http://support.apple.com/kb/HT4145
The Airport Extreme is of course connected to cable modem and Ethernet switch, and one Airport Express is connected to the Ethernet network. As per instructions for creating a "Roaming Network", Airport Express is set to same SSID, security type, and Password.
Questions:
1. How does the client device know which Airport to connect to? In other words, will it switch to the closer WiFi transmitter automatically? The WiFi reception problem is intermittent in the fringe areas so what I do not want it for it to stick with the more distant Airport Extreme in the basement when the Airport Express which is closer will work better.
2. How can I tell which of the Airports the attached client device is using?
The third Airport Express will be in a third location - I was planning on using it also for expanding coverage but after reading the warnings about performance suffering when purely using WiFi for the expansion in this location ("Wireless Extended Network" without an ethernet connection) I have figured that the single wired Airport Express will be adequate and will use the third Express to do Airplay only.
http://support.apple.com/kb/HT4259
Question: Can I use this second Airport Express to extend the wireless network via "Extended Wireless Network" while the other two are in "Roaming Netowrk" configuration? Without bogging down??
Mitch

1. How does the client device know which Airport to connect to?
The Mac computer will automatically connect to the wireless access point with the strongest signal...which is probably the closest AirPort. An iPhone or iPad may not do this and will tend to stay connected to one AirPort.
2. How can I tell which of the Airports the attached client device is using?
On a Mac, open Macintosh HD > Applications > Utilities > AirPort Utility. Click on one of AirPorts. In the area to the right, locate the AirPort ID and jot that down. Then do the same for your other AirPort.
Move your Mac near one of the AirPorts and log on to the wireless. Hold down the option key on the Mac while you click the fan shaped AirPort icon at the top of the screen. Look for the BSSID. That is the AirPort ID of the device to which you are connected.
If you are close to the "remote" AirPort, and you see the AIrPort ID of the "main" router when you are testing, then you know that the network is not configured correctly.
Can I use this second Airport Express to extend the wireless network via "Extended Wireless Network" while the other two are in "Roaming Netowrk" configuration? Without bogging down??
There will be a modest 10-15% bandwidth loss with the "extend" setup, assuming that the Express is located where it can receive a strong wireless signal from the AirPort to which it is associated. You can avoid the bandwidth loss if the Express is also connected via Ethernet as part of the roaming configuration.

Panasonic BL-C131 wireless doesn't work with Airport Express and Extreme

I have Airport Express to create a wireless network, and an Airport Extreme to extend the wireless network. When I connect the LAN cable on Extreme and the Panasonic BL-C131, the camera can successfully detect IP and work fine. However, when I remove the cable and switch the camera to wireless mode, it can never detect the IP. I've read somewhere in the camera manual that it needs a UPnP enabled router to have wireless work. I am wondering if there is any way to confirm, since I know Airport only support Bonjour.
I really like to keep the Airport at home, or I'll need to replace it with a D-link router.

Issue solved

Please help... jam packs not working with logic express 8

my jam packs do not work. i go to the library tab, open one of the jam packs category, "Symphony Orchestra" for example. i choose an instrument folder ("strings" for example), and then an instrument. a window pops up and says "File not found... Result code = -43". What does this mean? What can i do to fix it?
You my also know that the jam packs work fine in Garage Band.

Hi,
on a UNIX based system, every file has it's own set of permissions who own it, who can read it or who can write to it. Sometimes, things get corrupted (often during an install or update, when administrator rights are used or not used....)
However: Open the Harddisk Utility in the Applications/Utilities Folder. Select your Harddisk and klick on "repair permissions". Wait for some minutes (takes some time).
You should do this not only now, but before and after every major update/change to your system.
The next step, if this doesn't work, would be to manually locate the files EXS24 is missing, but for this better ask someone in the Logic Pro forum.
Fox

Zoom H4 no longer works with logic pro and 10.5.6 update. HOw to Fix.#@##ED

Hi all,
i have a zoom H4 that i am using as an interface at the moment. all was fine untill i updated my computer to 10.5.6 around christmass.
in my last post a few days ago someone said to update the H4 but it has the current drivers already (2.20)
The zoom is now only working as an out.
Any ideas would be appreciated.
Thanx
Marc

From another thread:
"Today I received the following reply fro Zoom regarding your issue.
Please let me know if this does not help you.
1. Open the "Utilities" folder from "Applications" folder.
2. Click on "Audio MIDI Setup" icon to start "Audio MIDI Setup".
3. Click on "Open Aggregate Device Editor" from "Audio" in menu bar.
4. Click on "+" button to add "Aggregate Device".
5. You can change the name to new one by double-click on "Aggregate Device". Put the new name (ex."H4 Audio IN/OUT") here.
6. Check both "H4 Audio In" and "H4 Audio Out" boxes and click "Done" button.
7. Set the default input and output to a newly created Aggregate Device (ex."H4 Audio IN/OUT") from the "Audio MIDI Setup" window.
8. To use the create Aggregate Device in your DAW software, select the created "H4 Audio IN/OUT" through audio setup menu of the DAW software."

Working with Logic Express and Sibelius Student

Similar Messages

Maybe you are looking for