Working with many different formats/codecs/frame rates within one Sequence.

Good Afternoon,
As an editor for an ad agency I am being tasked with cutting a demo reel together. Nothing too difficult.
The reel is to include video footage of past projects, going back a couple years or so. The footage that I will be given will undoubtably be in a variety of formats, codecs, frame sizes, frame rates, etc (all SD, though). Delivery is SD DVD.
My question is this:
What is the best way to set up my timeline for a barrage of clips with differing specs?
Do I encode all the media assets FIRST to conform to my Sequence Settings? Or do I just deal with the large amounts of timeline rendering as I work with different formats and codecs? Or do I....?
I am running FCP 5.1.4, so I don't have the Open Timeline feature going for me.
I appreciate any advice and tips you can offer!
Thanks!

Your final format is NTSC SD DVD, so you're going to have to go to 720x480 at some point. This is what I would upscale to. Make sure your "client" knows that the 320x240 wmv's may not look to good in the final production.
Personally I use MPEG Streamclip (an excellent FREE application that's part of many a pro's arsenal) for this kind of conversion and/or upscaling. It's not particularly intuitive (especially for upscaling) so read the manual.
You may need to get hold of Flip4Mac or Episode for the wmv conversions.
I would tend to convert to a lossless codec like Apple Uncompressed or Animation. You could try going to NTSC-DV but you're going to lose some quality initially and again when you do the final mpeg2 compression.
Experiment.

Similar Messages

Multiple formats and frame rates in one sequence

i have material shot on many different cameras. it includes PAL and NTSC, HD and SD, 24, 25, 30, and 60 fps, ProRes, DCVProHD, DVCam, etc etc. the final product is going to HD in both NTSC 24fps and Pal 25fps, for NatGeo domestic and international.
the roughs are already done with this hodgepodge. my job is to clean up the audio (done), and send the video out in for color, titles, and graphics. i'm trying to get at least the frame rates to match at 24, much of it is already in 24 dvcprohd or prores, so i have been doing quicktime exports of the non-dvcprohd/prores video to prores, then conforming to 24p in cinema tools, then overlaying the clips in the sequence with a fit to fill edit. sync has not been a problem, miraculously, even though the speeds end up between 100 and 125 percent.
am i doing anything right, and if not, what's a preferable way to handle this mess? i tried media manager initially but nothing would relink, so i gave up and started doing the clips individually as stated above.
all i know for sure is that whatever i end up doing, they're not paying me nearly enough.
-m

Hi Shane - Thanks for getting back to me! I figured I'd have to compress it, but
my question is - how? Initially, I used MPEG Streamclip to import the 23.98 dvd footage in as a DV/DVC Pro QT at 100% Best Quality. I then imported those files into FCP. After getting your e-mail, I went to export the files into Compressor (from FCP), and I'm only given 5 setting choices under "QT." I'm not sure which one to select . . . Uncompressed 10 bit? Any ideas? Again, thanks so much!!!

HT204416 My Safari is no longer working with many sites. However Chrome and Firefox work fine. I would like to re-install Safari in an effort to clear up the problem I can not resolve.

My Safari is no longer working with many sites. However Chrome and Firefox work fine. I would like to re-install Safari in an effort to clear up the problem I can not resolve.

1. From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
2. Select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
and confirm. Test.
3. If the above steps don't resolve the problem, please describe it in more detail.

Firefox will not connect or open. Mac OS 10.6.8. I was working with many open tabs when Firefox stopped working. Now it won't connect. I have uninstalled and downloaded it several times.

I was working with many open tabs and firefox crashed. Now it won't connect to the internet at all.

Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

HT4972 2nd generation ipod touch is pretty much no good anymore? It is not able to upgrade to iOS5.1 and so will not work with many of the Apps now available in the App store. Is there any way to find out which apps will work with 2nd generat

2nd generation ipod touch is pretty much no good anymore? It is not able to upgrade to iOS5.1 and so will not work with many Apps in the iTunes store? Is there a way to find out if the App will work before you download?

Look to the app developer to provide that information when browsing the iTunes Store.
The iPod Touch still works, so what's your problem with it? It still works with older apps, it still does what it's intended to do.
If you aren't happy then sell it and buy a new one.

How can i split a long single video with many different scenes in it ?

how can i split a long single video with many different scenes in it ? in premiere pro cs3

Yep better ask in the Premeire Pro forums, but while loading their forum page check the cutter tool (C) it will allow you to cut your footage

How to set the Codec, Frame rate, Bit rate, and Resolution for iMovie 10.0.5

To upload a video to Vimeo, I need to be able to set the codec, frame rate, bit rate and resolution to make sure the file is compressed to under 500 MB. Where in iMovie 10.0.5 am I given the option to adjust these settings?
Thank you!

Another question is in continuous mode, NI DAQmx uses Samples per channel to determine the buffer size. But according to the website you specified, it says if the acquisition is continuous (sample mode on the DAQmx Timing.vi is set to Continuous Samples), NI-DAQmx will allocate a buffer according to the following table. And for sample rate between 100 - 10,000 S/s, the buffer size is 10 kS. So if I set the sample rate to be 5000 S/s, and set the Samples per channel to be 20000, then what exactly the buffer size is? 20 kS or 10 kS?
Thanks.

FLEX working with a different JVM...?

Hey I need help for this, because I don't know how to do it.
My flex builder 2 is working with a different jvm than the one
installed on my pc. The one I installed is JVM 1.5 and the one that
Flex Builder 2 is using is JVM 1.4, and I've been having really big
problems when launching it, and I think this might be the problem,
so i would really appreciate if someone could tell me how to make
FLEX Builder 2 work with JVM 1.5 (which is the one I
installed).

open jvm.config
and set java.home to the path where the JVM you want to use
is

If i buy a new ipad and bring it to England will it still work with the different voltages and the 3G/4G?

if i buy a new ipad and bring it to England will it still work with the different voltages and the 3G/4G?

They both seem to cover the same 3G bands - from http://www.apple.com/ipad/specs/ :
Wi-Fi + 4G for AT&T model: 4G LTE (700, 2100 MHz); UMTS/HSPA/HSPA+/DC-HSDPA (850, 900, 1900, 2100 MHz); GSM/EDGE (850, 900, 1800, 1900 MHz)
Wi-Fi + 4G for Verizon model: 4G LTE (700 MHz); CDMA EV-DO Rev. A (800, 1900 MHz);UMTS/HSPA/HSPA+/DC-HSDPA (850, 900, 1900, 2100 MHz); GSM/EDGE (850, 900, 1800, 1900 MHz)
CDMA isn't any use here as there aren't any UK CDMA based carriers, they are all GSM/sim card based (I'm not aware of any CDMA carriers in Europe). As the AT&T version appears to support an extra 4G LTE band then that might be the better one.

How can i get a superdrive to work with a late 2008 macbook that already had one inside but taken out for upgrading.

I bought a superdrive thinking it would work with my macbook. i took the built in one in for a second hhd. Please help!!!!

Did you know ahead of time, that certain models of Mac cannot use the new Apple USB SuperDrive?
Usually those are ones that had an internal superdrive, as there is a firmware block or other device
that generally does not allow the external USB Superdrive from Apple to work with older Macs...
This includes iMacs or others with the built-in optical drive, MacBook/Pro of certain vintage, etc.
Since the use of the optical drive space inside the case has been used for second hard drive or
solid state drive, the need for a superdrive does not diminish once its no longer in there...
The topic of trying to make the Apple USB Superdrive to work has been mentioned online, incl here:
https://www.ifixit.com/Device/Apple_Optical_Drive
There is mention of a way to attempt to use command line, to make the 'Apple USB superdrive' work
with older Macs that otherwise won't allow it. Be aware this may affect the warranty, it also may affect
the returns policy if it does not work out, once you mess with the firmware or command-line entries.
So that is one of the ifixit items in the link above. You should be able to find a fair deal on a different
brand of USB optical drive that does much the same thing as the Apple, and without extra drivers.
If you get some other brand, test & check it to be able to perform as needed (like a Superdrive) and
note the returns policy on this kind of product before you buy it, just in case it does not function.
Good luck & happy computing!

I double-click on event to see all the photos in that event displayed, but all I get is 1 large photo on the edit page. To see the photos in that event, I have to scroll. Need to be able to work with all the photos in that event, not one at a time.

I double-click on event to see all the photos in that event displayed, but all I get is 1 large photo on the edit page. To see the photos in that event, I have to scroll. Need to be able to work with all the photos in that event, not one at a time.

Maybe you need to adjust the zoom slider in the lower left corner of the window?
Regards
Léonie

So my iphoto is set up with a different apple account from my current one... the email on the old account is out of date and i do not know the password for it. my copmuter will not let me update my iPhoto nor will my old email account allow me to accessit

so my iphoto is set up with a different apple account from my current one... the email on the old account is out of date and i do not know the password for it. my copmuter will not let me update my iPhoto nor will my old email account allow me to accessit

Did you try this Apple website regarding your old Apple ID and its password: Apple ID: If you forget your password
OT

How do i work around 2 different frame rates in same sequence??

hello,
a client of mine just shot a video using two frame speeds...24PA and regular 24p.
how can i get around this? so far i captured the 24PA footage using the pulldown in the FCP, and the 24P in a regular 48k capture...
i am currently editing in a 23.98 timeline, but the 24p footage looks slower...HELP!
thanks,
steve

hi kyle,
sorry, but just to elaborate on your response a little while ago here:
- i captured the 24PA footage using the advanced pulldown
- i captured the 24P footage using no pulldown
- i am editing in a 29.97 timeline now, as most of my footage was shot with 24P
please let me know your thoughts on how i should go about working with this footage!
thanks!
steven

Which format and frame rate should I use?

So I have worked here and there with final cut to make videos for live projections at music shows, but now I want to take it more seriously. Since I have done it randomly I didn't mind taking the time to render constantly and figure it out as I go. But now I want to work on larger projects, like making music videos, a little more consistently and want things to run a little faster.
Basically I have about 200 gb of random footage. Or about 400 little videos. Very little of it is actually shot with a camera on my own. Most of it is collected video from either other people, or downloaded off the internet. Tons of things that are in the public domain that I want to use. My videos are pretty fast paced, almost seizure inducing sort of effects. I layer videos with each other and throw filters on everything. The problem is, the rendering is taking so much time out of everything. Is there a way for me to get around the rendering? Either by a certain setting within final cut, or just by converting all my video to one format? If I had to I would invest the time to convert every single video I have to some sort of format that would allow me to work faster. If so, which format should I use? Frame rate? etc.
I would just like to get this out of the way so in the future I can convert videos to the right format. Just to allow some sort of flow within my workspace.
I am using FCP 7
Model Name: MacBook Pro
Model Identifier: MacBookPro5,3
Processor Name: Intel Core 2 Duo
Processor Speed: 3.06 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 6 MB
Memory: 8 GB
Bus Speed: 1.07 GHz

You want to be on this forum
Final Cut Studio

How can I keep my text format after pasting a text with a different format?

No matter when and where I start to write some text (whether it is a SImpleText, E-Mails, or anyother application's doc), if I have to cut and paste a text from a different source that is formatted differently than my original text (ie. the one I am already using ), once I have pasted the differently formatted text in my doc, the typeset changes while it continues to type with the same formatt used in the text I just pasted.
How can I continue typing with the same text formatt used before pasting the new text, after pasting the new text, without having to change size, font style etc. Is there a short cut?
What I have been doing to avoid this problem is: I usually type my entire text content (whether it is an E-Mail, or other doc) then, once I am done typing, I paste the text that was cut from a differently formatted document, so that my text remains with the same formatt in its integrity, while the pasted text stands out differently, but it is a bit complex doing that , because I not only have to remember to paste the other text when I am done typing (I run the risk of forgetting to paste the text I need to insert--which has happened already) or I keep struggling with my formatt change after the pasting of the new text, so my document text starts looking like the same text as the one which was just pasted.
Thanks for your time reading this!

KerrBr wrote:
How can I continue typing with the same text formatt used before pasting the new text, after pasting the new text, without having to change size, font style etc. Is there a short cut?
(1) First, let's make sure we're talking about the same thing. By "SImpleText, E-Mails" you mean TextEdit and Mail, right?
(2) Some apps (TextEdit, Mail) use the text engine provided by Mac OS X. By and large, these apps will behave in a similar manner. Others (eg, MS Word) use their own text engine, and their behaviour can be quite different. For such an app you need to consult its manual.
(3) In TextEdit, if you want the pasted text to adopt the current style, then use kurt188's tip.
(4) However, if you may want the pasted text to retain its own attributes, while you continue to type in the previous style. I don't know of any shortcut or command that will achieve this. However, you can try to work around it.
(4.1) TextEdit has the Copy Style (⌘⌥C) and Paste Style (⌘⌥V) commands. If you haven't yet used it, ⌘⌥V will insert the default style. So type, paste, ⌘⌥V, then continue typing. If you have used, it will insert whatever style was copied. You can, type, ⌘V, click somewhere before the pasted text, ⌘⌥C, click after the pasted text, ⌘⌥V, and continue typing.
(4.2) Alternatively, type your text. Then type one more character, eg, "x". Then ←, ⌘V, ⇧→, and start typing. The new text should adopt "x"'s format. (This should work in Mail, too. I don't know, because IMHO e-mail should always be plain text.)

Working with many different formats/codecs/frame rates within one Sequence.

Similar Messages

Maybe you are looking for