Working with Masks in CS4 (Windows)

I am working with Masks in CS 4, and am using the Paintbrush to create a mask of several parts of my picture. How do I set up my software so that the part I am masking shows up on screen as I paint it, instead of just in the Mask box on the adjustment layer?

Not sure I understand your issue, but the typical process if you are using an adjustment layer, which appears with it own mask, is as follows:
Open your mage and this appears as your background layer. Click on your desired adjustment (say, hue/saturation as an example) and and make any changes you desire. The image on screen will reflect these changes over the entirety of the image. Now select your brush tool and set its characteristics, make sure the foreground color is set to black, make sure that the adjustment layer is selected (not the background layer) in the layers palette and make sure the mask is selected in the adjustment layer by clicking on the mask thumbnail. Using your brush paint in the areas you want to protect from the adjustment. The painted areas will revert to their original hue/saturation appearance and the corresponding areas will turn black in the mask thumbnail.
Hope this helps.
Paulo

Similar Messages

Rotate tool not working in cs6. It says "Could not complete your request because it only works with OpenGL enabled document windows." Its worked fine in the past....

Rotate tool not working in cs6. It says "Could not complete your request because it only works with OpenGL enabled document windows." Its worked fine in the past....
-CharlieH23

Copy and paste only this area, you may have to scroll down.
Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2494 MHz
Built-in memory: 6019 MB
Free memory: 3360 MB
Memory available to Photoshop: 5227 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
OpenCL Version: 1.2
OpenGL Version: 2.1
Video Rect Texture Size: 16384
OpenGL Memory: 2112 MB
Video Card Vendor: Intel
Video Card Renderer: Intel(R) HD Graphics 4000
Display: 1
Display Bounds: top=0, left=0, bottom=768, right=1366
Video Card Number: 1
Video Card: Intel(R) HD Graphics 4000
Driver Version: 10.18.10.3958
Driver Date: 20140930000000.000000-000
Video Card Driver: igdumdim64.dll,igd10iumd64.dll,igd10iumd64.dll,igdumdim32,igd10iumd32,igd10iumd32
Video Mode: 1366 x 768 x 4294967296 colors
Video Card Caption: Intel(R) HD Graphics 4000
Video Card Memory: 2112 MB

Product key will not work with this edition of Windows 7

I received a product key for Windows 7 Professional N whilst I was at University via Dreamspark. I'm building a new computer and when it's come to inputting the product key, it comes up saying Product key will not work with this edition of Windows 7.
The version I installed was Windows 7 Professional using an iso and a USB. I rang the phone activation number and when I got through to a representative, I gave him the product key and he said it is valid and should be working. He transferred me to technical
services but instead I got cut off.
At this point I'm really not sure what the issue is, the key was for Windows 7 Professional N, I installed Windows 7 Professional and customer support confirmed it as a valid key. Am I missing something?

Post your issue to the Windows 7 Genuine Issues forum. Here are the instructions on how to produce a diagnostic:
MGA
Diagnostic Report:
To properly analyze and solve problems with Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to desktop -http://go.microsoft.com/fwlink/?linkid=52012 )
Once downloaded, run the tool.
Click on the Continue button, after a short time, the Continue button will change to a Copy button.
Click on the Copy button in the tool (ignore any error messages at this point), and then paste (using either r-click/Paste, or Ctrl+V ) into your post.
One
Issue Per Thread:
Most Activation and Validation issues look the same, on the surface, but can have many different causes and fixes. This is why we ask for a diagnostic report and this is also why we ask that you create your own thread for your issue (in other words,
don't post your issue in another person's thread).
It just becomes too complicated to try to troubleshoot multiple different issues in the same thread.
New
to the Forums?
Instructions
by Kamin of Ressik
Wanikiya and Dyami--Team Zigzag

Will the Bedford PowerSynch case work with iTunes on a Windows machine?

Will the Bedford PowerSynch work with iTunes on a Windows machine vs using a Mac?

Do you mean the Bretford PowerSync cart or tray for iPads and iPods? If so, Bretford's web site lists only Mac OS X. You'll have to contact Bretford and ask if there's a workaround for Windows, or any plans to add Windows compatibility.
Regards.

Is there a dj software that will work with my itunes on windows 7

is there a dj software that will work with my itunes on windows 7

See Empty/corrupt iTunes library after upgrade/crash or
Recover your iTunes library from your iPod or iOS device.
tt2

I need an emulator (?)to work with 5.2.6 Windows.

I need an emulator(?) to work with 5.2.6 Windows.

I'm afraid you haven't given us any info that would be of any help in assisting you. What do you mean by "5.2.6 Windows". What type of emulator are you looking for. If you tell us exactly what you are trying to do, we might be able to be more helpful.

What is a good wireless printer that will work with a macbook and windows laptops?

What is a good wireless printer that will work with a macbook and windows laptops?

Any printer that visibly supports OS X will work fine. My personal recommendation is Brother, followed rather distantly by Canon.
Recently I have grown to favor Brother printers over the others. They are inexpensive, their OS X integration is well-implemented, their consumables are reasonably priced, and their technical support is free forever. If you need to call them and explain that you have a Mac, you will immediately receive competent assistance.
The third and subsequent choices are so far down from those two they're not worth mentioning. I have grown to dislike HP printers, for all the above reasons.
Read user reviews from vendor websites - Amazon is a good place to start, since Amazon lets people write almost anything they want... right, wrong, or completely idiotic.
Read the reviews on the respective manufacturers' websites as well, but consider the likelihood of them deleting negative reviews.
Process all those user reviews employing your own common sense, and draw your own conclusions.
Consider AirPrint compatibility for future needs. Those features add very little to the price over a USB - only or wireless printer. Understand that not all wireless printers are AirPrint compatible - AirPrint must be specifically indicated. Choose among this list: http://support.apple.com/kb/ht4356
After OS X compatibility, the next consideration should be the cost of consumables. Laser printers are cheaper than inkjets in that regard.
Here is a list of AirPrint compatible Brother printers and multifunction devices

HT203687 iCloud is now no longer working with Outlook running on Windows Vista. Is this still unresolved?

iCloud is no longer working with my Outlook 2007 running on Windows Vista. Is there any resolution from Apple?

Hi,
Please check whether the issue happens when using the Outlook 2010 with Windows server 2003 SP2 to access other mailboxes, such as new created Exchange 2013 mailbox or other migration mailbox.
Since the issue doesn’t occur when using Outlook in other machine, the mailbox configuration in Exchange server side should be correct. Please
create a new Outlook profile
for the problematic user in Windows server 2003 with Outlook 2010 to have a try.
Regards,
Winnie Liang
TechNet Community Support

Microsof VX 3000 or 6000 Webcam does not work with Lync 2013 under Windows 8.1

Hi,
The problem is that i cannot use the Microsoft VX-3000 or VX-6000 with Lync 2013 under Windows 8.1.
If i go in settings under Video i can see the preview from the webcam just fine, so it works there no problem.
Wenn i try to enable my camera in a conference it does not work, i get an error: Your video cannot be started.
Now, there are no Windows 8.1 drivers for the Webcam so i installed the latest Windows 7 drivers. Because of that this webcam does not work with apps, that is fine i understand the driver problem and the way the new apps work.
But this Webcam works with skype under Windows 8.1 and it works with Lync 2010 client.
The same Webcam works just fine with Lync 2013 under Windows 7.
Is there anything i could do so that i get this Webcam to work with Lync 2013 desktop client under Windows 8.1?
Thanks

Hi,
According to your description, it may be caused by driver.
You can try to install the latest version of Display Driver to fix the display issue.
Since there is no driver for Windows 8.1, I suggest you wait for updating.
You can also post a case on Windows 8 forum, thank you for your understanding:
http://social.technet.microsoft.com/Forums/en-US/home?forum=W8ITProPreRel%2Cw81previtpro&filter=alltypes&sort=lastpostdesc
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

How come a USB will work with both Mac and Windows (as in that there are already files from Windows and Mac can still read and write onto it) but a external Hard Drive won't (as in there are files from Windows on there but Mac can read but not write)?

I have a Seagate Drive that I'm hoping to copy some movies from my Mac onto (because it only has a 512 SSD and I'd rather keep that empty and handy for more readily needed files) but it won't work. It shows up as a drive when connected (with the orange USB drive icon popping up) and is appropirately labeled "FreeAgent Drive", but when I try to copy files onto it it won't work. There are already windows files on there, such as some windows backups and lot's and lot's of pictures and videos. However, I have several USBs which already have windows files on them (namely movies, music, and other stuff) and copying and stuff works fine. Why won't it work with this hard drive and would work with USBs? Please help me out here guys, I am not experienced with Hard disks and formatting and stuff like that. 10 points for whoever helps me out the most. Thanks.

We will need to reformat your EXT, but it will then work on both Mac and Win
Connect the drive to your Mac, open disk utility
Go to the partiton tab and select '1' ... format should be ExFAT ... in options select MBR
Format the drive
It should now work on both OSs; report back

Strange on - Wake on LAN (WOL) works with Win2K3, but not Windows 7

Hi,
I have a PC that I originally had Windows 2003 on. With Win2K3, I can send a wakeonlan (magic) packet (WOL) and get it to power on remotely from my home network/LAN.
I just installed Windows 7 Ultimate 64-bit, in a dual-boot configuration, i.e., so I can boot the machine to either Windows 7 Ultimate 64-bit or Win2K3.
As mentioned, I can power the machine up remotely (from my home network/LAN), but if I've LAST booted into Win7, then shutdown, it doesn't respond to the WOL packet.
I've confirmed that if I boot into Win2K3, then shutdown, the WOL works fine.
I have another PC that has both Win2K3 and Windows 7 (also dual boot), and that works fine with WOL.
One difference between the one that doesn't work vs. the one that works is that the one that works is a machine that I just built a couple of weeks ago, which uses an MSI 880gm-E43 motherboard.
The one that doesn't work also has an MSI motherboard, but it's an older one, an MSI K9NBPM2-FID.
I've cross-checked the various Windows power management settings between the one that works, and the one that doesn't work, but I just can't get WOL to work with Win7 on that older machine. I've even turned the Windows Firewall off completely on the machine where WOL isn't working, but no matter what I've tried thus far, no joy :(...
The only thing that I can think of is that the network card driver (it's the MS one, from the Win7 distribution) might not work with WOL, but I've checked, and it's the latest driver from MS (Nvidia Nforce Networking Controller - 10/17/2008 - 1.0.1.211), and MSI doesn't have a specific Win7 64-bit driver for this motherboard.
So, I was wondering if anyone has any ideas about this?
Is there some registry setting or something that might allow WOL to work?
Thanks in advance,
Jim

Hi,
Unbelievable!
Just for the record, I got WOL working with the older machine, JUST after I posted the original msg.
Here's what I did:
- I was in Device Manager, and did Update Driver, but
- I selected to let me choose, and then I checked the "Show Compatible devices" checkbox
Then, a 2nd, older (10/6/2006 - 6.2.0.127) driver appeared, so I figured, "what the heck?" and tried that. I then shut the machine down, and sent a WOL packet to it, and kind of forgot about it (machines in a different room), but a few minutes later "bing!", the machine had powered up and booted into Win7!!
Anyway, as I said, for the record, and hope that this helps someone in the future.
Jim

My HP Photosmart 385 printer won't work with my operating system - Windows Vista Ultimate. Why not?

Is there a driver that I can dowload so my HP Photosmart 385 printer will work with my Windows Vista Ultimate operating system?

Hey Alyssa426,
Welcome to the HP Forums!
Since the installation disk does not support Windows 8.1, I would suggest trying to download, and install the drivers directly from the HP Support website. I have included a link to the 'HP Deskjet F4200/F4224 All-in-One Printer series Full Feature Software and Driver'. Once the software is downloaded, open the software, and follow through the on screen instructions for installation.
Please let me know the outcome of installing the software.
Thank you.
I worked on behalf of HP

Time Capsule Dual: Working with Excel files in Windows Computer

We just purchased the latest-gen Time Capsule to replace another earlier edition TC and we are having a strange problem. We have three iMacs and one PowerBook G4 connected wirelessly to the TC, along with two Windows XP machines which are wired in to the TC. The issue is that the two WinXP machines cannot view Excel files from the TC. When they try to open and work with an Excel file from the TC, they get a message that there is not enough memory to open, work with, or save any Excel files and it won't let them open the Excel file at all. If they copy the file from the TC to the local WinXP computer, they can open it and work on it just fine. At first I thought the issue would be with the new TC, but I plugged back the old TC and it has the exact same problem. The only commonality between the two is that I foolishly updated the firmware on both to 7.4.1. The old TC was working just fine until I installed 7.4.1, and then it started to have the same problem handling the Excel files.
By the way, none of the Macs have any problems accessing and working on the Excel files off the TC, this only happens to the WinXP machines. Also, it only happens on the Excel files; we have other types of files in the TC and all of them seem to open and work just fine. But Excel is our mainstay so we're looking for a solution, can anyone help?

Same happened to me a while back when i updated the firmware 7.4.1 . the macs were ok but the Windows PC's sharing the Time capsule would not save any excel files as errors like memory too low
etc started to appear. easy way to correct this was to got into airport Utility and downgrade back to 7.3.2 , from the menu , you can select what firmware rev you want to go back to select downgrade to 7.3.2 and everything will work ok after this, remember to deselect auto update and check for firmware in the Airport pref till Apple get this sorted out.
Cheers ian

Will iTunes work with a laptop running windows 7 and 64bit?

Trying to get a system started and I'm not sure if iTunes will work with a windows 7 laptop. It has 64 bit not 32.

Yes, iTunes is compatible with 64-bit Windows 7 systems.

EMET doesn't work with common software in Windows 7

I installed EMET 5.0, and began to have problems with EMET shutting down Acrobat Reader, Flash, Java, Internet Explorer, and browser linkage to .PDF files. Also, I could not load a .PDF file directly either. (No way to view the PDF docs
for EMET!)
Error messages included "simexecflow", EAF mitigation and need to turn off "Deep Hooks", and others.
I installed EMET about a month ago, didn't notice immediate problems, but a large set of Windows updates happened soon afterward (installed 11/8/14). Soon after this I first noticed the problems. I can't say for sure they weren't there before,
since the time between was short.
I (I think) managed to stop the Java and Flash problems with settings, but could not get others fixed. I finally had to uninstall EMET to fix ALL the problems !
We also have a Vista and an 8.1 machine, no problems with EMET (so far!).
I know that EMET may have problems with some applications, but it seems to me that there should NEVER be problems with these very common and essential applications.
Please either fix the problems with EMET, or tell me specifically what's needed to make these apps work with Windows 7 and EMET.
This machine has been thoroughly checked for all manner of malware, including rootkits. All clear.
Thanks!

Microsoft released EMET 5.1 on November 10th which fixes compatibility issues with those programs under EMET 5. Here's the information on the fixes:
http://blogs.technet.com/b/srd/archive/2014/11/10/emet-5-1-is-available.aspx.
"Several application compatibility issues with Internet Explorer, Adobe Reader, Adobe Flash, and Mozilla Firefox and some of the EMET mitigations have been solved."

Working with Masks in CS4 (Windows)

Similar Messages

Maybe you are looking for