Working with Media in iWork '06

Hello there. I was wondering if it is possible to play a tune from a second or third slide until the whole slides are over? I only know how to play the tune from the very first slide until the end. I tried to put it right on the particular slide but when I change the slide, the music stops playing. Thank you in advance.

Sadly I have not been able to start the music to play part way through a presentation (to play over a number of slides). So as a work around I have created multiple presetations and hyperlinked them together. The only prep you need is to have all the files open when you start to avoid delays as the presentations change over.
All the best
bob

Similar Messages

Digi@nwhere A/D Plus on Windows XP MCE (not working with Media Center)

I just recently bought a MSI Digi@nywhere A/D Plus from Newegg.com http://www.newegg.com/Product/Product.aspx?Item=N82E16815127008 to replace the WinTV by Hauppage that came with my HP Media Center m7640n, after installing the card and drivers, I am able to watch TV in the ArcSoft application that came on the CD, but using the Windows Media Software
I've applied every possible update/rollup for my Windows Media software, but it just says Quote
"At least one tuner that supports a standard (NTSC) TV signal must be installed to configure the TV signal. Please ensure that your tuner hardware is correctly installed, restart the computer, and try again."
What am I doing wrongly that Media Center is not finding the card? Since my software is the 2005 version, from what I've read supports ATSC, and was listed on the Newegg.com and MSI spec as supported.
Quote
Windows XP SP2 / MCE 2005 / Vista (when using MCE 2005 OS, an extra 3rd party DVD decoder must be installed) / Windows 7
Is the 3rd party DVD decoder required for device use or just for burning to disc?

Quote from: Stu on 30-October-10, 17:38:44
Did you use the latest driver from here?
http://eu.msi.com/index.php?func=downloaddetail&type=driver&maincat_no=132&prod_no=1948
Yeah, I've got the "Digi@nywhere A/D Plus BDA driver" installed on my PC
and my "device manager" shows that it's currently the 1.345.9.1009
I can view the TV in the ArcSoft TotalMedia software and everything works fine, but Media Center still fails to recognize the card. I'd really prefer Media Center because of it's enhance EPG & recording scheduling over TotalMedia
Is there something more to be done to/with Media Center? Registry edit or 3rd party add-on that I'm missing?

Desktop 6 software won't work with media card, but phone works with card just fine.

Pearl 8110
media card transcend 8G HC
using latest software update for desktop and phone.
Vista business
Since upgrading to desktop 6 several months ago I can't upload media to my phone. Windows does not recognize the media card as another drive.
I can take pictures, record video and voice using the phone, and send that via bluetooth to my vista computer, but not by usb.
However when trying to transfer media to my phone via usb I get an error message says I need to turn on mass storage mode (yes it's always on) but the error message just keeps repeating when I try to transfer anything to the media card via usb. Can't transfer via bluetooth windows says I need some type of software that I can't find.
I uninstalled version 6 and reloaded the last working version 5 and the roxio media manager and that didn't work either.
I see this as being a blackberry software problem, uless someone has another idea. I've posed in other forums with no help comming.
What do I do?

Hi midnightvisions,
Have you tried reinserting the media card and battery?
Can you please clarify something? Are you currently able or unable to transfer these files via Bluetooth?
If you are able to, you may want to transfer these files to your PC via Bluetooth and format the media card and test again. http://bit.ly/f8fCQ8 If this does not resolve the issue or you are unable to transfer them via Bluetooth, try doing a clean uninstall of the BlackBerry Desktop Software then reinstall and test again. http://bit.ly/bvuRJU
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Presenter 7 work with media server 3.5

as title says, I am newish to adobe stuff, I have a client that has some swf files that we are going to replace with content created in presenter, will there be any issue with hosting/serving the content created in presenter 7 with adobe media server 3.5?
also if I am missing something big that makes this question stupid/pointless could someone please tell me?
Thanks

Technically, there shouldn't be any issue. The media server is there to deliver your flash content, so the fact that it came from Presenter is not really the issue here. I would just test it by putting the published files in a media file on your server and then using the appropriate URL call to the index.swf or index.html file.

Working with selection in iWork Pages '09

This would seem like a simple issue, and it may well be, but I am stumped.
In Pages, I have a document with some text on it, say "Hello World"
The cursor is at the end of the sentence, blinking. (No return after "Hello World")
I want to insert a return and have the cursor end up sitting after that return, (blinking).
I have tried this with limited results:
tell application "Pages" to tell document 1
set mySel to (get selection)
set selection to mySel & return
end tell
The problem here is that while this does insert a return after "Hello World", the selection is still at the end of "Hello World"
Consequently, if I were to start typing, the new text would be at the end of paragraph 1, and not at the end of paragraph 2.
All I am trying to do is insert a new paragraph at the cursor and begin inserting text from there.
Any help is greatly appreciated.

Both of the scripts below should insert a return character before the insertion point:
--Script 1
*tell application "Pages" to tell document 1*
*set P to character offset of (get selection)*
*make new character at before character P with data return*
*select insertion point after character P*
*end tell*
--Script 2
*tell application "Pages" to activate*
*tell application "System Events" to keystroke return*

Premiere CS4 with Media Encoder CS5?

Hi,
When I was given my CS4 suite (production premium) years back, it included Premire Pro. Then, when I told my boss I needed to upgrade to CS5, he purchased the Web Premium Suite. This was fine, for the most part, as Illustrator, Flash, and Photoshop are the main programs I use, but we just recently got a video project that is giving me some issues.
We created what turned out being a 4 min + video. After some trial and error we settled on creating multiple segments in Flash and exporting them as uncompressed MOV files from Flash. Then we brought all of those MOV files together in a premiere pro project. The problem seems to occur when I export out an MP4 video from Premire Pro CS4. Premiere launches Media Encoder CS4 and then creates the MP4. The MP4 plays on a cellular device like we want it to, but it will not display a thumbnail/preview of the video when viewing the video in the phones gallery.
We have tried some other tests, and if we export out an MOV or AVI from Flash CS5 then convert that to an MP4 using Media Encoder CS5, there suddenly seems to be a thumbnail on the phone for the video. After multiple tests, it appears the problem might be related to which version of Media Encoder our final MP4 is produced in. ME CS4 - No thumbnail. ME CS5 - thumbnail.
The problem is, we HAVE to use Premiere as our final compiling tool, but I cant seem to get a Premiere Pro CS4 file to work with Media Encoder CS5.
Any thoughts???
Thanks,
Justin

but to automatically open up AME CS5 ... hmmm.. maybe a hack?
No, that will not work. Even if you have Audition 4.0 installed (beta), edit in Audition from CS5 will only access Audition 3.0.
The only way to try it is to open AME CS5, go to File/Add Premiere Pro Sequence and select the CS4 project and then the correct sequence.

Help usb capture decives that work with FME ?

I have tried both the Dazzle dvd 100 and the pinnacle PCTV HD
pro stick and neither of them work properly, mostly give video but
no audio. has anyone tested and got a usb capture device working
with media encoder? if so what device and how

avidvid, thank you for you advice. I did check the system profiler and the device is
recognized, but to no avail. In fact it is getting worse. When I initiate log and
capture I can hear the transport working. It is moving all the time even though
the capture window is now only showing the color bars. The "beach ball" is now
constantly whirling and will only stop when the "deck" is turned of at the source.
I am worried that I have messed up the reinstall. I am really not sure how much
"stuff" I must remove from the system, or whether to reinstall the entire suite.
Thanks again for your trouble.

Streaming Webcam with media server and cs3

Can someone explain how to stream a webcam with media server?
Ive got media server and flash cs3 (actionscript 2.0 in this
case) installed, and I want to create a live webcam stream, but Im
not really sure how to do it. I know it involves NetStream, and
camera somewhere along the line but thats about it. If someone coul
give me an iea of how to o it that owul be much appreciated.
Thanks

Clockwork_Killa,
I don't use it with webcams, but there are some nice examples
in William Sanders book, Actionscript 3.0 Design Patterns. It's the
only book I've found that has any real world examples of working
with media in Flash with fms2.
Hope it helps. Good luck. You're going to need it ;)

HT3325 Keynote Remote doesn't work with hyperlinks?

Remote sync well with iPad .. Impressive
However, it doesn't work with any hyperlinks!
It's simply an image and swiping the pages ... Ignoring all hyperlinks ... It does work with media but u would have to put them in sequence in your slides. If you work with many hyperlinks within a slide, you can't get any to work with the remote!
Quite disappointed that Apple actually charges for an app so simple with no value added services!
There are many free apps doing the same simple tasks.
Thumbs DOWN.
Do something about it Apple!

Any remote that actually works?

Digi Vox mini-II with Media Portal?

Has anyone got a MSI Digi Vox Mini-II USB DVB-T stick to be recognised by Media Portal (MP)?
MP say that I should be able to add support myself for any DVB-T card with "BDA" drivers. First question: are the drivers that come with the Digi Vox BDA drivers? If not, is it possible to get hold of some? And if they are, any ideas why MP still won't recognise the card? If someone has got theirs working, I'll post more info regarding exactly what I've tried etc.
I have read that some Digi Vox products (not explicitly my card) are rebranded Twinham cards, and some Twinham products ARE supported by MP. Many people have had success by replacing their MSI drivers with Twinham. I tried this but I admit I wasn't really sure what drivers were appropriate, so I can't rule this out as a solution. If anyone knows anything about this, that would be great.
Cheers,
Matt.

Cheers for the quick reply. Unfortunately I have tried the most recent drivers you suggested.
It's not really a problem with the card: it works fine with the supplied software and it claims to work (in the manual and on the box) with MCE -- I've no way of testing this; it's just that it doesn't work with Media Portal. And I can't complain about this because it isn't in MP's list of supported cards. The only reason I haven't given up is that MP say that you can get any BDA DVB-T card (or stick) working with Media Portal using GraphEdit and this is what I can't get to work.
If anyone has had any experience with this then it would be great to hear from them.
And yes, I have raised this issue with MP: I'm still awaiting a reply on their forums.
Thanks in advance if anyone has any suggestions!
Matt.

Media Encoder CC hangs when working with 96/24 audio

Title says it all! Has anyone else had this problem with Media Encoder CC? I just upgraded from CS5.5 to CC, and there were no issues with encoding 96/24 audio with CS5.5. I can reduce the audio files to 48/16 and theres no issue, but all the asset files for audio are in 96/24 and I'd of course rather work with the high resolution audio. I've tried searching the interwebz on the issue but can't find anything specific to the audio causing Encoder to hang. Thanks!

Thomas Nord wrote:
Update: We have discovered an issue where you can get this behavior if the source is a Premeire Pro sequence whose sample rate doesn't match that of the clips in that sequence. The solution is to match the sample rate of your sequence to that of your clips. Please let me know if this does not resolve your issue.
Thanks,
Tom
I had some 96/16 audio from an H4n recorder. AME just sat there. Also had the same problem exporting directly from PPro without using AME. Just sat there, no error, just nothing.
Changed the final sequence samples to 96kHz sampling and problem solved. That's a real bummer, since Adobe definitely pushes the sort of "edit anything" mantra a lot, and having to tailor sequence settings to a recently added audio clip is a step in the wrong direction. Glad to know it CAN be fixed, since these renders need to happen, but need that one patched up.

How do I get fios to work with my new desktop w/ Windows Media Center

Can someone please help me I have "fios".TV and internet 1HDSTB + 1HDDVR with multi room dvr Home media mgr.how do I get fios to work with my new desktop HP Pavillion m9715f**(specs below)**w/ Windows Media Center or did I just throw away my money?
also equipted is 47" Samsung 850series 1080p 120hertz HD LCD TV + 36" Samsung 560series 1080p 60hertz HD LCD TV and 19"Samsung 950b LCD Monitor
** computer specs**
Product number NZ017AA
Introduction date 30-Jun-2009
Country/region sold in: United States,Canada
Hardware Base processor
Phenom-9650 (A) 2.3 GHz (95W) 3600 MHz HyperTransport 3.0 Socket, AM2+
Chipset AMD 780G
Motherboard Manufacturer: MSI Motherboard Name: MS-7548 HP/Compaq motherboard name: Aspen-GL8E
Power supply 300W
Memory
Component Attributes Memory Installed 8 GB Maximum allowed 16 GB (4 x 4 GB) (64-bit OS)
4 GB* (4 x 1 GB) (32-bit OS)
*Actual available memory may be less Speed supported PC2-6400 MB/sec Type 240 pin, DDR2
Hard drive750 GB SATA 3G (3.0 Gb/sec)7200 rpm
Blu-ray player & SuperMulti DVD burner with LightScribe Technology drive
This Blu-Ray Disc DVD drive introduces a player that reads Blu-ray Disc format enabling you to watch high-definition Blu-ray Disc movies. NOTE: This drive does not include high-definition write capability.
Formats/Disc types Write speeds Read speeds Storage capacity Blu-ray Disc BD-ROM SL NA up to 6X up to 25 GB BD-ROM DL NA up to 4.8X up to 50 GB BD-R SL not supported up to 6X up to 25 GB BD-R DL not supported up to 4.8X up to 50 GB BD-RE SL not supported up to 2.3X up to 25 GB BD-RE DL not supported up to 2X up to 50 GB HD DVD not supported DVD DVD-ROM SL NA up to 16X up to 4.7 GB DVD-ROM DL NA up to 8X up to 8.5 GB DVD+R SL up to 16X up to 12X up to 4.7 GB DVD+R DL up to 4X up to 8X up to 8.5 GB DVD+RW SL up to 8X up to 10X up to 4.7 GB DVD+RW DL not supported DVD-R SL up to 16X up to 12X up to 4.7 GB DVD-R DL up to 4X up to 8X up to 8.5 GB DVD-RW SL up to 6X up to 10X up to 4.7 GB DVD-RW DL not supported DVD-RAM up to 5X up to 5X up to 4.7 GB CD CDROM NA up to 40X up to 700 MB CDR up to 40X up to 40X up to 700 MB CDRW up to 24X up to 40X up to 700 MB CD-DA NA up to 32X up to 700 MB Video CD NA up to 10X up to 700 MB
Wireless Wireless LAN 802.11 b/g
Video Graphics Radeon HD4350
512 MB DDR2 memory
I/O Ports: HDMI, VGA, single-link DVI
Television Hauppauge ATSC/NTSC TV tuner card with FM tuner
Sound/Audio High Definition 8-channel audio
ALC 888S chipset
Network (LAN) Integrated 10/100/1000 Base-T networking interface
Memory card reader
Contains an Infrared receiver for remote control
Supports the following cards:
Compact Flash I
Compact Flash II
IBM Microdrive
Secure Digital (SD)
mini-SD
MultiMediaCard (MMC)
Reduced size MultiMediaCard (RS-MMC)
MultiMediaCard Plus (MMC plus)
MultiMediaCard Mobile (MMC mobile)
Memory Stick
Memory Stick Pro
Memory Stick Duo
Memory Stick Pro Duo
SmartMedia
xD Picture Card (xD = extreme digital)
External I/O ports
I/O ports on the front panel
Port type Quantity 15-in-1 (4 slot) with IR Receiver One USB Two Headphone One Microphone One Audio L-R One S-video in One Composite video in One
I/O ports on the back panel
Port type Quantity PS/2 (keyboard, mouse) Two S/PDIF out (coaxial) One VGA One (disabled due to the installation of a graphics card) DVI-D One USB Four 1394a One LAN One Audio (side speaker out, rear speaker out, center/subwoofer-out , line-in, line-out, microphone) One Each
Expansion slots
Slot type Quantity PCI Express x16 One (None available) PCI Express x1 Three (Two available)
Drive bays
Bay type Quantity 5.25" Two (One available) 3.5" Two (One available) Personal Media Drive One (One available) Pocket Media Drive One (One available)
Keyboard and mouse HP multimedia keyboard HP PS/2 optical mouse
Remote Control USB infrared remote control,Remote control expansion card with IR ports,IR emitter cable to transmit codes to a set top box

Based on what you've posted, your computer does not have the right tuner. You need a QAM tuner to record locals from FiOS, or a CableCard tuner to record all local and cable channels from FiOS.
QAM tuners to record local channels only
This requires Windows Vista or Windows 7
Hauppauge WinTV-HVR-2250
SiliconDust HDHomeRun (info on a sale)
CableCard tuner to record local and cable channels
This requires Windows 7 + one CableCard from Verizon for $3.99/mo
ATI TV Wonder Digital PC CableCard Tuner (records one channel at a time) -- $200-$250 on ebay
Ceton MOCUR tuner (records four channels at a time) -- coming in early 2010 for $400-$600
Make sure your computer has Windows 7 Home Premium (or better) installed. That's necessary to support CableCard tuners.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.

Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box.

Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box. Thanks! Olga

If the clips are not actually missing, you could try to refresh the timeline by using cmd-0 and then going to the timeline options tab. Then select name only where it says "thumbnail display". Press ok to accept the change, then repeat the process to add thumbnails back to your timeline.

Remote video streaming not working with Windows Server Essentials Media Pack

I installed Server Essentials Media Pack and the video streaming via remote access does not seem to be working. I see all the video files on the server's remotewebaccess page in "Media Library" group. When I try to play the video in Chrome
the player appears for a brief moment, but then the browser starts downloading the entire file. With Internet Explorer the empty browser window opens and the download starts. I am trying it while outside of my local network. The video streaming used to work
with Server 2012 Esesentials. Am I missing some additional codecs or remote streaming is no longer supported?

Hi,
What’s the default player for these media files on your computer? The issue may be caused by the default player could not load the media file correctly. Please make sure Windows Media Player
with full codec installed is the default one. And then check if the media streaming feature could work as normal. Here is an article about how to configure the media streaming feature, hope it helps.
Manage Digital Media in Windows Server 2012 Essentials
http://technet.microsoft.com/en-us/library/jj628151.aspx
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support

Media Encoder CS4 doesn't work with Premiere (pic related)

Oh hai!
I just got Adobe Master Collection CS4 and my Media Encoder doesn't work with Premiere CS4. When I try to export the file, Encoder starts normally. Then I click "Start queue" and Encoder starts loading. Loading takes almost five minutes, which is a long time, because my project is very simple. After that nothing happens, just a warning sign appears. When I click it open, some kind of log file open and it says:
Encoding failed
Could not read from the source. Please check if it has moved or been deleted.
And I didn't deleted anything. So what does that mean? Why that "Source Name's" path is different than my project files path? Can this problem relate that somehow?
I have also another problem with Premiere CS4, maybe there's a link between these two problems. I can't get Premiere projects linked to open in Premiere CS4. When I right-click the project icon, and click “Open with…”, I can't find Premiere from the list. When I click "Browse", I can find Premiere.exe from my computer, but if i doubel-clicked it, nothing happens. It won't appear to the list or anywhere else. Or have I missed something? So now the project files are linked to open in After Effects. Of course I can open projects from Premiere, but how do I get them open straight from file?
I have long experience using Adobe Premiere and this is the first time I got this kind of problems. I have also downloaded new updates for Premiere and Encoder, this didn't help. Does that matter, that I didn't installed Premiere in C-drive? However it's in my computers internal drive, I have divided my hard drive for five parts, one part contains all of my softwares. My scratch disks are in different hard drive (external), does that matter? I tried different location, but that didn't help.
Please help, I can't do any video editing, because of this problem. And sorry for my english, ask if you didn't understand something. =)

Hello, this is terrible problem, which i found in CS 6 softwares ...
solution i found only working, is uninstall and reinstall full package.. but it is not all,
you need to do BRAND NEW admin account in windows, and install it there.
that means, i could not export after repair from encoder in my original account never more (!!)   .. this is really terrible way how to repair this issue, because :
1.by reinstalling of software, client WASTE HIS TIME
2.by necessity to begin work in another windows profile you again WASTE YOUR TIME because of learning and migrating all other profile modifications, which i see really unaccpetable. Adobe means, this solution of repair is ok, and they did not do till today any steps of creating some "clever" solution.
I ask everybody, who will meet this issue in future, guys, please, complain about this situation, give "BUG Report" to them, and write "feature request" to them , in the way of creating some repair tool, which check actual "broken" connections between encoder and premiere, which refuses to "take material" from it and encode, and REPAIR it automatically..
   I am not IT, but ..does it seems so hard to create this ? Adobe IT developers should know their systems, and should create such utility tool really easy.
History of this problem and detailed description, HOW i did "repair" this. With wasting of app 2,5 days of my working time :
1. after repairing "error 5" problem , i solved it by reinstalling the suite from the new admin user profile (profile B) .
I continued my work on my normal working windows profile . (profile A)
Every cooperation (AE+Pr, export media via "queue" to Encoder) was working fine . . .
2. suddenly it stop working (without knowing any possible reason - i did not do installations )
and showed in error export log file :
"Could not read from the source. Please check if it has moved or been deleted."
3.repair via procedure(procedure "a"):
i did this procedure on the profile B (profile from last time installation of repairing problem error 5)
I did these steps :
a-uninstall master coll suite
b-i used Adobe cleaner tool (remove ALL)
c-removed raw directories in locations
•C:\Program Files\Adobe
•C:\Program Files(x86)\Adobe
•C:\Program Files\Common Files\Adobe
•C:\Program Files(x86)\Common Files\Adobe
•C:\ProgramData\Adobe
d-removed these links from registry file
•HKEY_LOCAL_MACHINE\SOFTWARE\Adobe
•HKEY_CURRENT_USER\Software\Adobe
•HKEY_LOCAL_MACH INE\SOFTWARE\Wow6432Node\Adobe
•HKEY_CURRENT_USER \Software\Wow6432Node\Adobe
e-restarted the PC
f- newly installed the Master Coll CS6
g-update the software
result of repair of "3" : problem still exists
4.Ok i find out after coordination with support, it should have been created ANOTHER NEW admin account.
4a:so i did the same procedure (uninstalling) in profile B
4b: and then i created brand new admin profile (profile C)for INSTALLATION of software
4c: restarted the pc (and did not updated it yet)
result :
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile C) : export WORKS
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile B) : export WORKS
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile A) : export DOES NOT WORK ! ! !
(in profile A, is possible to export some raw video material in encoder which is imported to it via "drag and drop)
problem i see:, i have my basic profile A, which i am interested to work, because of all my directory modifications are in there..
this issue should be some "broken" connections between encoder and premiere, which refuses to "take material" from it and encode.
what i expect :
to get from Adobe some repair tool, which automatically checks these connections and repair if necessary, without necessity of founding the new profile and reinstallation of whole software.. this is madness !
what i do NOT expect from Adobe:
to get from Adobe advice of kind : you have to reinstall full software in new admin profile. sorry , we do not know the solution, because we do not know, how do behave our software.

Working with Media in iWork '06

Similar Messages

Maybe you are looking for