Working with Motion 5 and FCPX

hey guys
i am just getting started with motion 5 but i just wanted to know whats the easiest way to get them to work smoothly together please?
say for eg i have fcpx open and i have a shot where i want to add a background to my greenscreen and another where i would like to use a couple masks and other effects, whats the best way to 'get them over to motion and back to fcpx' please?
do i just export the clip then work on it in motion then export it back or is there a function where i can just seamlessly go between the 2 programs please?
any help woud be great!! thanks

Things have changed quite a bit from the FCS way of working in that (currently, at least) there is no round tripping between the two apps.
The effects that are in FCP X (including things like transitions and titles) are Motion-originated (not sure whether it's correct whether they're considered Motion projects). Much of the time they have sufficient controls available so that the user doesn't need to leave FCPX. But if necessary, they can be opened in Motion by control clicking. Once Motion is opened, you can modify them, rename and publish to FCP. You can also add adjustments via widgets and rigging that can then be made within FCPX after publishing.
For projects that are originated in Motion, they can be exported as QT movies (typically Pro Res 444), saved as templates, etc.
Hope that helps.
Russ

Similar Messages

  • New fonts installed with Motion 5 and FCPX??

    Anyone know if there are some new fonts imbedded into FCPX and Motion 5? Seems like I have at least 1 new font (Gaz) that does not appear in any other applications or in the Font Book app. (Gaz is what Mark Spencer uses in one of his new tutorials for Motion 5.)
    If so, where are they and what other fonts are new/included? Kinda like to know those things.

    Final Cut Pro X and Motion 5 have the following fonts built in to support the supplied Motion templates:
    Banco Heavy.ttf
    Bank Gothic Light.ttf
    Bank Gothic Medium.ttf
    Blair Medium.ttf
    Bradley Hand Bold.ttf
    ComicScript.ttc
    Coolvetica.ttf
    Duality.ttf
    Edwardian Script.ttf
    Flatbush Bold Oblique.ttf
    Flatbush Bold.ttf
    Forgotten Futurist Bold Italic.ttf
    Forgotten Futurist Bold.ttf
    Franklin Gothic Demibold.ttf
    Gaz Transport.ttf
    Goudy Old Style Bold.ttf
    Goudy Old Style.ttf
    Handwriting Dakota.ttf
    HumanaSerif.ttc
    Korataki.ttc
    Meloriac.ttf
    Misadventures Black Italic.ttf
    Misadventures Black.ttf
    Octin Team Heavy.ttf
    Paleographic Thin.ttf
    Paleographic.ttf
    Proxima Nova.ttc
    Scheme.ttc
    Sign Painter House Script.otf
    Snell Roundhand.ttc
    Strenuous.ttf
    Superclarendon Bold.ttf
    Superclarendon.ttf
    Synchro LET.ttf
    Zingende Regular.ttf
    These fonts are stored in Final Cut Pro or Motion in the following subfolder: Contents / Frameworks / TextFramework.framework / Versions / A / Resources / Fonts. To get inside Final Cut Pro or Motion, right- or control-click the application and choose Show Package Contents from the context menu.
    They also have
    FCMetro34.ttf
    In Contents / Resources / Fonts - which is used to display timecode.

  • Working with motion menus and buttons

    Is there a way to have the buttons only show up at a certain point during the motion menu? I don't want them in the beginning while a certain portion is playing - I want to force the viewer to watch that section.

    Buttons show up at the loop point in the menu - some examples of the fade ins
    http://dvdstepbystep.com/motion.php
    http://dvdstepbystep.com/useelements.php

  • .psd file not working with Motion 5

    I have a .psd that doesn't want to work with Motion 5.  Every time I try and import it, Motion says that it's not a valid codec.  I can't figurt out what's going on, all my other .psd files seem to work.
    Yes, I'm using RGB colors not CMYK (that is the onne known issue thus far).
    I'm just totally at a lose.  Here's what the console says, if anyone has any insight, I woudl appreciate it:
    6/27/11 1:12:55 PM          [0x0-0xb50b5].com.apple.motionapp[1326]          CPSDSlicesResourceItem::Load(): unsupported slice resource item version (8)
    6/27/11 1:12:55 PM          Motion[1326]          -[ProPSDImageRef initWithPath:] - WARNING - invalid or nonexistent file at /Users/compy/Desktop/PostAppointmetVideo/Corrolary Projects/mockup.psd. Image ref not created.

    I'd be happy to email one of them to you if you'd like.  Or give it to you in some fashion at any rate.  I'm not seeing this problem pop up anywhere else on the internet, so I'm guessing it's just me.  But it would be nice to check with another motion user.
    Email me at jay <no space, just keeping the bots guessing> carr <at> gmail <I'm sure you can guess> com.
    It certainly would be nice to see what happens when I give it to you.  I'm having some very significant issues with PDFs and can't figure out why...

  • Will iMovies work with Motion 5?

    I am getting more and more into film, abandoned buildings are getting crazier the more I go through them. I want to share my videos on YouTube but I would like to have an introduction on the videos, will iMovies work with Motion 5?

    Hi Appleman756,
    I'm not sure how integrated you want them to be, but you can export your Motion project to use as the intro for your iMovie.
    Motion 5: Share to iMovie, GarageBand, and other Apple applications
    Share a Motion project to iMovie
    Choose Share > Export Movie (or press Command-E).
    Choose an export format from the Export pop-up menu.
    This menu provides a list of codecs.
    Choose None from the “Open with” pop-up menu. 
    Choose an option from the Include pop-up menu.
    If you’ve set In and Out points in the Timeline, use the Duration pop-up menu to choose whether to export the entire sequence or the portion between the In and Out points. 
    Click Next.
    Enter a name and location for the exported file, then click Save.
    Motion renders and saves your movie, which can now be imported into an iMovie project using the File menu. For more information, see iMovie Help.
    Best,
    Nubz

  • Endless beach Ball. Impossible to work with Motion.

    Impossible to work with Motion since I have my new Apple 23" Cinema display, I did the quick time stand alone thing, got rid of the .plist and just do not know where to go from there. Any suggestion would be appreciated

    At this stage, if the whole machine is slowing down I'd suspect a disk or memory problem.
    Try the following few things.
    1. Run the 'Disk Utility', select each volume in turn and click 'verify volume' for each one.
    2. Run the 'Disk Utility', select each volume in turn and click 'verify disk permissions' for each one.
    None of the above are destructive, ie they only check for problems, not fix them. Each has a counterpart 'Repiar Volume' and 'Repair permission' which do attempt to fix problems. Use with caution. They are normally very safe to use, and don't normally result in data loss, but I'd be a fool not to say "ensure you have a backup of anything you can't afford to lose."
    Finally, just in case something shook loose when you attached the new display, click the Apple menu, select 'About this Mac' and 'More info...' and check that the profile shown matches your expectations in terms of the amount of memory fitted etc etc.
    Of course, all of the above may be a little overkill if it's just some weird problem related to the new display, so before doing any of that, put the old display back on and see if the problem goes away.

  • Is there a way to download Firefox 4 without going on a 3rd party site? Many of my addons do not work with Firefox 5 and 6.

    Quite a few of my addons don't work with firefox 6, and I would prefer to keep them, but my pc crashed and I had to reformat. I don't want to have to go on a 3rd party site, since they could easily put a virus on my pc. I couldn't find anywhere to download it on the site.
    Thanks

    ftp://ftp.mozilla.org/pub/firefox/releases/4.0.1/
    Just keep in mind that Firefox 5.0 was a security release for 4.0.1.

  • Working with AVCHD: Log and Transfer FAQs

    Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
    Working with AVCHD: Log and Transfer FAQs
    Log and Transfer was introduced to the product chain in Final Cut Express 4, and is the program's process for ingesting files in the AVCHD format utilizing MPEG-4 AVC/H.264 video coding and either Dolby AC-3 or uncompressed linear PCM audio coding. The most frequently observed problems relating to the Log and Transfer process are generally quite easily addressed.
    What should I know before attempting to ingest my footage?
    The following facts regarding the Log and Transfer process were adapted from the [Apple Knowledge Base article|http://support.apple.com/kb/TA24840?viewlocale=en_US] on transferring AVCHD in Final Cut Pro 6.0.1 but still hold true for the current version of FCE:
    AVCHD support is available only on Intel-based Macintosh computers.
    AVCHD camcorders typically connect to computers via USB 2.0, not FireWire.
    DVD-based AVCHD camcorders are not supported in Mac OS X 10.4 or earlier.
    Standard definition video recorded with AVCHD camcorders cannot be accessed in the Log and Transfer window. SD and HD clips should not be mixed on the same HDD.
    Preview of AVCHD video in the Log and Transfer window is limited to 1x forward playback. Scrubbing the playhead does not update the video in the Preview area until you stop scrubbing.
    When you choose to transfer AVCHD audio in the Logging area, audio is automatically mixed down to stereo.
    AVCHD footage is not ingested natively but is transcoded to the Apple Intermediate Codec.
    Apple Intermediate Codec files are significantly larger than the original AVCHD files. FCE does not estimate the size of a transcoded AVCHD file before ingesting, so it is possible to exceed the available space on your capture disk during transfer. Before ingesting, keep in mind that the disk space required is about ten times greater than the size of the native AVCHD file.
    Which specific formats can be ingested by Log and Transfer?
    Only AVCHD footage can be ingested through the Log and Transfer process. Other formats and variants such as AVCHD Lite are not supported. All video should be recorded in a frame size of either 1440x1080 or 1920x1080 and a frame rate of 25 or 29.97 frames per second. Audio recorded on AVCHD camcorders is generally at a rate of 48kHz. If your camera shoots in a format that does not comply with one of these setups then it is most likely not supported by the application and is not guaranteed to work correctly.
    Which Easy Setup preset should I select before ingesting my footage?
    It is extremely important to select the preset that matches your media before you attempt to ingest via Log and Transfer. There is only one Easy Setup preset that matches the frame size and rate of your footage. If you intend to ingest AVCHD clips through Log and Transfer you will first need to select one of the following presets:
    AVCHD-Apple Intermediate Codec 1440x1080i50
    AVCHD-Apple Intermediate Codec 1440x1080i60
    AVCHD-Apple Intermediate Codec 1920x1080i50
    AVCHD-Apple Intermediate Codec 1920x1080i60
    If these four options do not appear under your Easy Setup list then you probably need to run Software Update and update to FCE 4.0.1. DO NOT cycle through the available presets until you find one that works - there is only one preset that matches your media and it should be evident which one to choose by the way it is named. Select the AVCHD preset that mentions your frame size and frame rate (i50 presets support both 50i and 25p frame rates; similarly, i60 presets support both 60i and 29.97p frame rates). If you do cycle through many options in the hope of selecting the correct one through guess-and-check you will probably have corrupted your preference file and need to [trash your preferences|http://support.apple.com/kb/TS2611] before continuing.
    Why don't my clips appear when I open the Log and Transfer window?
    Make sure your camcorder records AVCHD in a format supported by FCE4. It should be connected to one of your computer's USB ports (never connect it to an external hard drive or other external device such as your keyboard or a USB hub), powered on, and set to video playback mode.
    If the camcorder +does not+ mount on your Desktop your USB port or cable may be malfunctioning. Try plugging it in to another port or using a different USB cable to see if it makes a difference.
    If the camcorder does mount on your Desktop but the clips do not appear in the Log and Transfer window you will need to point the program to the directory that contains your media.
    First, click the Add Folder button in the upper left of the Log and Transfer window. The button looks like this:
    Then, you will need to navigate to the root directory in which your media is stored. Most camcorders call this folder "PRIVATE" or "AVCHD" and it should be located at the very top level of the camcorder when mounted. If your camcorder records to a valid AVCHD directory structure then your clips should load after the Add Folder process is completed.
    I would like to keep a working backup of my original clips so that I can delete them off the camcorder's internal memory. How should I do this?
    There are two main ways to keep a backup of your clips. The first is to ingest every clip on your camcorder through the Log and Transfer process, and store the Apple Intermediate Codec files the application creates in an easily accessible place such as an external FireWire drive. The advantage of this method is that you have the ability to open back up old editing projects, reconnect the media as necessary, and keep going as if you'd never left. However, due to the large amount of space AIC takes up (usually somewhere in the vicinity of 41-50GB an hour when transcoded from AVCHD), this is not always feasible.
    Another often preferable approach is to copy over the root directory in which your clips are stored (usually named "PRIVATE" or "AVCHD") from the camcorder to your computer or an external drive. As long as you maintain the original file structure, you will be able to ingest your clips again at a later date using the "Add Folder" process detailed above to navigate to their new location.
    My clips appear, but when I attempt to ingest a red exclamation point appears and the window displays the message "Error: No Data"
    This is one of the most common problems that users experience when trying to ingest their media through the Log and Transfer process. Luckily, it also has one of the easiest solutions.
    In the Log and Transfer window, click on the gear icon in the top right and select "Preferences" in the contextual menu that appears.
    Make sure the video is set to transcode to the Apple Intermediate Codec and the audio is set to Plain Stereo.
    After doing so, hit OK and try to ingest again.
    I am experiencing a problem that is not covered in this tip or the solutions here do not work.
    The best thing to do at this point would be to trash your preferences and start a new topic in the [FCE Forum|http://discussions.apple.com/forum.jspa?forumID=936&start=0] with a detailed description of your problem. Check out the user tip on [Basic Troubleshooting in Final Cut Express|http://discussions.apple.com/thread.jspa?threadID=2662419] for more information.
    This is the 1st version of this tip. It was submitted on December 03, 2010 by skalicki`.
    Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

    Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
    Working with AVCHD: Log and Transfer FAQs
    Log and Transfer was introduced to the product chain in Final Cut Express 4, and is the program's process for ingesting files in the AVCHD format utilizing MPEG-4 AVC/H.264 video coding and either Dolby AC-3 or uncompressed linear PCM audio coding. The most frequently observed problems relating to the Log and Transfer process are generally quite easily addressed.
    What should I know before attempting to ingest my footage?
    The following facts regarding the Log and Transfer process were adapted from the [Apple Knowledge Base article|http://support.apple.com/kb/TA24840?viewlocale=en_US] on transferring AVCHD in Final Cut Pro 6.0.1 but still hold true for the current version of FCE:
    AVCHD support is available only on Intel-based Macintosh computers.
    AVCHD camcorders typically connect to computers via USB 2.0, not FireWire.
    DVD-based AVCHD camcorders are not supported in Mac OS X 10.4 or earlier.
    Standard definition video recorded with AVCHD camcorders cannot be accessed in the Log and Transfer window. SD and HD clips should not be mixed on the same HDD.
    Preview of AVCHD video in the Log and Transfer window is limited to 1x forward playback. Scrubbing the playhead does not update the video in the Preview area until you stop scrubbing.
    When you choose to transfer AVCHD audio in the Logging area, audio is automatically mixed down to stereo.
    AVCHD footage is not ingested natively but is transcoded to the Apple Intermediate Codec.
    Apple Intermediate Codec files are significantly larger than the original AVCHD files. FCE does not estimate the size of a transcoded AVCHD file before ingesting, so it is possible to exceed the available space on your capture disk during transfer. Before ingesting, keep in mind that the disk space required is about ten times greater than the size of the native AVCHD file.
    Which specific formats can be ingested by Log and Transfer?
    Only AVCHD footage can be ingested through the Log and Transfer process. Other formats and variants such as AVCHD Lite are not supported. All video should be recorded in a frame size of either 1440x1080 or 1920x1080 and a frame rate of 25 or 29.97 frames per second. Audio recorded on AVCHD camcorders is generally at a rate of 48kHz. If your camera shoots in a format that does not comply with one of these setups then it is most likely not supported by the application and is not guaranteed to work correctly.
    Which Easy Setup preset should I select before ingesting my footage?
    It is extremely important to select the preset that matches your media before you attempt to ingest via Log and Transfer. There is only one Easy Setup preset that matches the frame size and rate of your footage. If you intend to ingest AVCHD clips through Log and Transfer you will first need to select one of the following presets:
    AVCHD-Apple Intermediate Codec 1440x1080i50
    AVCHD-Apple Intermediate Codec 1440x1080i60
    AVCHD-Apple Intermediate Codec 1920x1080i50
    AVCHD-Apple Intermediate Codec 1920x1080i60
    If these four options do not appear under your Easy Setup list then you probably need to run Software Update and update to FCE 4.0.1. DO NOT cycle through the available presets until you find one that works - there is only one preset that matches your media and it should be evident which one to choose by the way it is named. Select the AVCHD preset that mentions your frame size and frame rate (i50 presets support both 50i and 25p frame rates; similarly, i60 presets support both 60i and 29.97p frame rates). If you do cycle through many options in the hope of selecting the correct one through guess-and-check you will probably have corrupted your preference file and need to [trash your preferences|http://support.apple.com/kb/TS2611] before continuing.
    Why don't my clips appear when I open the Log and Transfer window?
    Make sure your camcorder records AVCHD in a format supported by FCE4. It should be connected to one of your computer's USB ports (never connect it to an external hard drive or other external device such as your keyboard or a USB hub), powered on, and set to video playback mode.
    If the camcorder +does not+ mount on your Desktop your USB port or cable may be malfunctioning. Try plugging it in to another port or using a different USB cable to see if it makes a difference.
    If the camcorder does mount on your Desktop but the clips do not appear in the Log and Transfer window you will need to point the program to the directory that contains your media.
    First, click the Add Folder button in the upper left of the Log and Transfer window. The button looks like this:
    Then, you will need to navigate to the root directory in which your media is stored. Most camcorders call this folder "PRIVATE" or "AVCHD" and it should be located at the very top level of the camcorder when mounted. If your camcorder records to a valid AVCHD directory structure then your clips should load after the Add Folder process is completed.
    I would like to keep a working backup of my original clips so that I can delete them off the camcorder's internal memory. How should I do this?
    There are two main ways to keep a backup of your clips. The first is to ingest every clip on your camcorder through the Log and Transfer process, and store the Apple Intermediate Codec files the application creates in an easily accessible place such as an external FireWire drive. The advantage of this method is that you have the ability to open back up old editing projects, reconnect the media as necessary, and keep going as if you'd never left. However, due to the large amount of space AIC takes up (usually somewhere in the vicinity of 41-50GB an hour when transcoded from AVCHD), this is not always feasible.
    Another often preferable approach is to copy over the root directory in which your clips are stored (usually named "PRIVATE" or "AVCHD") from the camcorder to your computer or an external drive. As long as you maintain the original file structure, you will be able to ingest your clips again at a later date using the "Add Folder" process detailed above to navigate to their new location.
    My clips appear, but when I attempt to ingest a red exclamation point appears and the window displays the message "Error: No Data"
    This is one of the most common problems that users experience when trying to ingest their media through the Log and Transfer process. Luckily, it also has one of the easiest solutions.
    In the Log and Transfer window, click on the gear icon in the top right and select "Preferences" in the contextual menu that appears.
    Make sure the video is set to transcode to the Apple Intermediate Codec and the audio is set to Plain Stereo.
    After doing so, hit OK and try to ingest again.
    I am experiencing a problem that is not covered in this tip or the solutions here do not work.
    The best thing to do at this point would be to trash your preferences and start a new topic in the [FCE Forum|http://discussions.apple.com/forum.jspa?forumID=936&start=0] with a detailed description of your problem. Check out the user tip on [Basic Troubleshooting in Final Cut Express|http://discussions.apple.com/thread.jspa?threadID=2662419] for more information.
    This is the 1st version of this tip. It was submitted on December 03, 2010 by skalicki`.
    Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

  • I have recently installed Mavericks and since then I have been unable to shut down or log out of my mac.  I work with two screens and now I seem to have programmes at the top of both screens which I didn't before.  any advice?

    I have recently installed Mavericks on my desk top and since then I have been unable to switch off my computer without crashing it. I work with two screen and now I seem to have the menu bar on the second screen as well which I did not have before.  Can you please help me?

    Dr Bettina, I had similar problems with Mavericks. I installed it on a Mini and a 13" MacBook Pro. I can't speak to your disdplay issues, but I can confirm the inability to logout, shut down, or restarft without a forced, power button shut down. I can also report frequent System Prefs freezes and finder issues, like folder contents taking half a minuite or more to render, or not appearing at all. And while a few Adobe CC apps actually ran faster, InDesign ran like molasses uphill in Decemner.
    I tried uninstalling or disabling numerous 3rd party apps and pref panes. I unplugged everything but the keyboard, ran DiskWarrier, repaired permissions, did fsck -f, trashed various preference files, reinstalled the OS... You name it, and I tried it — short of a potion using eye of newt.
    After two days of totally hosed productivity, I restored OS 10.8.5 on the Mini so I could actually get some work done. However, I've decided to leave Mavericks on the MBP as a sort of crash dummy, and will install and thoroughly test all updates until stability has been achieved. Then — and only then — will I upgrade the Mini to Mavericks, even if it means waiting 'til a .2 or even .3 update.
    Good luck to you...

  • HT201210 hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

    hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

    Try the suggestions here to see if they resolve your problem:
    http://support.apple.com/kb/ts1559
    If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

  • APPLE DOCKING STATION NO LONGER WORKS WITH TOUCH 3G and 4G after ios 4.2.1

    APPLE DOCKING STATION NO LONGER WORKS WITH TOUCH 3G and 4G after ios 4.2.1 update.
    I have both of these touches. I updated both 3g and 4g to ios 4.2.1 and poof...no docking station support other than charging, no audio and no remote function. My av/cable works with the tv, and the headphone jack still outputs audio, just no auido through the Apple dock and hte remote is dead. I purchased the dock from the apple store last year and it was working with both ipod 3g and 4g grrrrr...
    Is Apple now in the bug trade business?, trade one for another....
    Anyone else have this problem?

    My iPod Touch 3G running 4.2.1 works fine with the Apple docking station.
    Perhaps you have a loose cable somewhere and/or a dead battery in your controller?

  • Why Model MD297AE/A is not working with Fcae time and Model MD293C/A is working in UAE with Facetime

    Why Model MD297AE/A is not working with Fcae time and Model MD293C/A is working in UAE with Facetime.
    In fact I have given my iPhone to my daughter to use in Canada (purchased from UAE ISP) she is unable to use Face Time within Canada. ?
    Is it possibile to activate FaceTime in Canada if iPhone is purchase from UAE.
    Purchase under Points by ISP (No contract)
    Thanks
    Abbas

    Hello sir
           I agree what u replied for the above question, but because of the UAE request, you cannot deactivate the facetime completely from this iphone, they should stop working through SIM network. The iphone is a universal mobile which can travel all over the world, many tourist people will suffer due to that, pls re-consider in taking back and try to make it upgrading this software.
    Thanks
    SATHISH KUMAR

  • I am working with Acrobat XI and when I try to add text to geopdf file I get a popup screen that says this is a secured document and editing is not permitted. How do I fix this?

    I am working with Acrobat XI and when I try to add text to a geopdf file I get a popup screen that says this is a secured document and editing is not permitted. How do I fix this?

    I figured it out...needed to use comment tool set, not the editing tool set.

  • Existing Apple ID is not longer working with Face Time and Message on the iPhone after iOS 6

    After the IOS 6 update on my iPhone the Apple ID is not longer working with Face Time and Message. Each time I try to log in I receive the message that the password or the user is not right. But they are, because on all other devices and all other parts of the iPhone (iCloud, AppStore, iTunes) they are working. Other Apple IDs are working fine.
    What's wrong? Any idea?
    Thanks

    Blue
    It sounds like you restored from an old back-up.  Did you back-up just before your software update?  It will use your last one and if your last back-up was a ywear old then it will use that one.
    In general, if you are getting these messages on your iPhones select logout (when you get that Apple Id request) and then log back in with your newer ID.
    Sorry for your losses.
    Cheers

  • Can I email photos w/o templates Iphoto provides? I used to be able to choose a few photos and email them. Now I have to work with these templates and can barely see what I'm writing!

    I used to be able to choose a few photos and email them. Now I have to work with these templates and often do no want to. Could someone tell me the process for choosing to send photos without the templates?

    Like Larry pointed out in iPhoto's General Preferences pane:
    Click to view full size
    OT

Maybe you are looking for