Working with motion menus and buttons
Is there a way to have the buttons only show up at a certain point during the motion menu? I don't want them in the beginning while a certain portion is playing - I want to force the viewer to watch that section.
Buttons show up at the loop point in the menu - some examples of the fade ins
http://dvdstepbystep.com/motion.php
http://dvdstepbystep.com/useelements.php
Similar Messages
-
Are there any problems with motion menus and buttons in DVDSP 2 on OS 10.4?
I have not used DVD Studio Pro 2 since upgrading to Tiger but it appears to no longer be showing moving motion on menus and buttons.
Are there any problems that I should be aware of when using DVDSP2 on OS 10.4?
I have not upgrade to a newer version only because I do not have any HD software to create DVDs.
Thanks
PaulNew Discussions ReponsesThe new system for discussions asks that after you mark your question as Answered, you take the time to mark any posts that have aided you with the tag and he post that provided your answer with the
tag. This not only gives points to the posters, but points anyone
searching for answers to similar problems to the proper posts.
If we use the forums properly they will work well... -
Working with Motion 5 and FCPX
hey guys
i am just getting started with motion 5 but i just wanted to know whats the easiest way to get them to work smoothly together please?
say for eg i have fcpx open and i have a shot where i want to add a background to my greenscreen and another where i would like to use a couple masks and other effects, whats the best way to 'get them over to motion and back to fcpx' please?
do i just export the clip then work on it in motion then export it back or is there a function where i can just seamlessly go between the 2 programs please?
any help woud be great!! thanksThings have changed quite a bit from the FCS way of working in that (currently, at least) there is no round tripping between the two apps.
The effects that are in FCP X (including things like transitions and titles) are Motion-originated (not sure whether it's correct whether they're considered Motion projects). Much of the time they have sufficient controls available so that the user doesn't need to leave FCPX. But if necessary, they can be opened in Motion by control clicking. Once Motion is opened, you can modify them, rename and publish to FCP. You can also add adjustments via widgets and rigging that can then be made within FCPX after publishing.
For projects that are originated in Motion, they can be exported as QT movies (typically Pro Res 444), saved as templates, etc.
Hope that helps.
Russ -
Missing all menus and buttons from Folio Builder
I had a problem with Folio Builder panel when change ID password. I re instal both plugin again( FP and FProdTool), but this did not help. After reading the forum about solving the problem >
1) Quit InDesign and any other CS apps
2) Use the Activity Monitor to quit the CS5ServiceManager or CS5.5Service Manager
3) Next delete this file based on version:
/Users/lnegi/Library/Application Support/Adobe/CS5ServiceManager/preference/csxs2.pref
/Users/lnegi/Library/Application Support/Adobe/CS5.5ServiceManager/preference/csxs2.pref
4) Then remove this item from the Keychain Access based on version:
Adobe-CS-5-renga
Adobe-CS-5.5-renga
To remove from the keychain:
Navigate to /Applications/Utilities and launch the Keychain Access.app
If the lock icon in the upper left appears locked, click on it and enter your password to unlock it.
Select the “login” item in the Keychains list in the top left.
Select “Passwords” from the category list.
Type “renga” in the search field in the top right.
Select any matches and press the delete key.
>>>>I followed the advice. But after that , Folio Builder panel has stopped working, missing all menus and buttons from FBpanel. Please help solve the problem!!!i'm disappoint ...after the second day, I can not work with my DPS.. afte trying this:
1. Uninstall Folio Builder Panel and Folio producer Tools ( Seems you might have already followed this step). Use Spotlight to serach for Uninstall Folio builder Panel and Uninstall Folio producer Tools and then uninstall repectively.
2. Uninstall Adobe Air.
3. Restart your Machine.
4. Reinstall Adobe Air from get.adobe.com/air
5. Reinstall Folio Builder Panel and Folio Producer Tools.
>>> Folio Builder panel again does not appear!!! The Panel yesterday behaved strangely, one moment disappeared, then appeared( but with а blank window)....what am i doing wrong!? ...When I first time instal DPS, it also had problem after a older versions of DPS, but the problem eventually decided. Now I instal the last versions plugins HEEEEELPPPP!!!! -
I've been having some issues with the latest version of iDVD 7.0.1 in working with sub menus. Sometimes I need a sub menu button to click through to 1 full screen still image with the option to hit the "back button" to get to the main menu. How I've been doing this is when in the main menu, I click "add sub menu," then it brings me to a new menu where I can drop something in the drop zone, etc. I bring my full screen static image in and drop it while holding down the option or cntl key, which gets rid of the drop zones and gives me a full screen image. This has worked fine for me in the past. But now I get issues where the "back" button won't work to get back to the main menu. The "back" button simply flashes and won't let me select it once the disc has been burned.
Am I going about this all wrong? Should I be utilizing the slideshow function instead?
Thanks in advance!Needless to say, it had been a while since I sorted through my hotmail account. Last I looked I had 861 messages and I was starting to feel a bit like Jim Carrey in the movie Bruce Almighty....
Better late than never. -
Working with AVCHD: Log and Transfer FAQs
Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
Working with AVCHD: Log and Transfer FAQs
Log and Transfer was introduced to the product chain in Final Cut Express 4, and is the program's process for ingesting files in the AVCHD format utilizing MPEG-4 AVC/H.264 video coding and either Dolby AC-3 or uncompressed linear PCM audio coding. The most frequently observed problems relating to the Log and Transfer process are generally quite easily addressed.
What should I know before attempting to ingest my footage?
The following facts regarding the Log and Transfer process were adapted from the [Apple Knowledge Base article|http://support.apple.com/kb/TA24840?viewlocale=en_US] on transferring AVCHD in Final Cut Pro 6.0.1 but still hold true for the current version of FCE:
AVCHD support is available only on Intel-based Macintosh computers.
AVCHD camcorders typically connect to computers via USB 2.0, not FireWire.
DVD-based AVCHD camcorders are not supported in Mac OS X 10.4 or earlier.
Standard definition video recorded with AVCHD camcorders cannot be accessed in the Log and Transfer window. SD and HD clips should not be mixed on the same HDD.
Preview of AVCHD video in the Log and Transfer window is limited to 1x forward playback. Scrubbing the playhead does not update the video in the Preview area until you stop scrubbing.
When you choose to transfer AVCHD audio in the Logging area, audio is automatically mixed down to stereo.
AVCHD footage is not ingested natively but is transcoded to the Apple Intermediate Codec.
Apple Intermediate Codec files are significantly larger than the original AVCHD files. FCE does not estimate the size of a transcoded AVCHD file before ingesting, so it is possible to exceed the available space on your capture disk during transfer. Before ingesting, keep in mind that the disk space required is about ten times greater than the size of the native AVCHD file.
Which specific formats can be ingested by Log and Transfer?
Only AVCHD footage can be ingested through the Log and Transfer process. Other formats and variants such as AVCHD Lite are not supported. All video should be recorded in a frame size of either 1440x1080 or 1920x1080 and a frame rate of 25 or 29.97 frames per second. Audio recorded on AVCHD camcorders is generally at a rate of 48kHz. If your camera shoots in a format that does not comply with one of these setups then it is most likely not supported by the application and is not guaranteed to work correctly.
Which Easy Setup preset should I select before ingesting my footage?
It is extremely important to select the preset that matches your media before you attempt to ingest via Log and Transfer. There is only one Easy Setup preset that matches the frame size and rate of your footage. If you intend to ingest AVCHD clips through Log and Transfer you will first need to select one of the following presets:
AVCHD-Apple Intermediate Codec 1440x1080i50
AVCHD-Apple Intermediate Codec 1440x1080i60
AVCHD-Apple Intermediate Codec 1920x1080i50
AVCHD-Apple Intermediate Codec 1920x1080i60
If these four options do not appear under your Easy Setup list then you probably need to run Software Update and update to FCE 4.0.1. DO NOT cycle through the available presets until you find one that works - there is only one preset that matches your media and it should be evident which one to choose by the way it is named. Select the AVCHD preset that mentions your frame size and frame rate (i50 presets support both 50i and 25p frame rates; similarly, i60 presets support both 60i and 29.97p frame rates). If you do cycle through many options in the hope of selecting the correct one through guess-and-check you will probably have corrupted your preference file and need to [trash your preferences|http://support.apple.com/kb/TS2611] before continuing.
Why don't my clips appear when I open the Log and Transfer window?
Make sure your camcorder records AVCHD in a format supported by FCE4. It should be connected to one of your computer's USB ports (never connect it to an external hard drive or other external device such as your keyboard or a USB hub), powered on, and set to video playback mode.
If the camcorder +does not+ mount on your Desktop your USB port or cable may be malfunctioning. Try plugging it in to another port or using a different USB cable to see if it makes a difference.
If the camcorder does mount on your Desktop but the clips do not appear in the Log and Transfer window you will need to point the program to the directory that contains your media.
First, click the Add Folder button in the upper left of the Log and Transfer window. The button looks like this:
Then, you will need to navigate to the root directory in which your media is stored. Most camcorders call this folder "PRIVATE" or "AVCHD" and it should be located at the very top level of the camcorder when mounted. If your camcorder records to a valid AVCHD directory structure then your clips should load after the Add Folder process is completed.
I would like to keep a working backup of my original clips so that I can delete them off the camcorder's internal memory. How should I do this?
There are two main ways to keep a backup of your clips. The first is to ingest every clip on your camcorder through the Log and Transfer process, and store the Apple Intermediate Codec files the application creates in an easily accessible place such as an external FireWire drive. The advantage of this method is that you have the ability to open back up old editing projects, reconnect the media as necessary, and keep going as if you'd never left. However, due to the large amount of space AIC takes up (usually somewhere in the vicinity of 41-50GB an hour when transcoded from AVCHD), this is not always feasible.
Another often preferable approach is to copy over the root directory in which your clips are stored (usually named "PRIVATE" or "AVCHD") from the camcorder to your computer or an external drive. As long as you maintain the original file structure, you will be able to ingest your clips again at a later date using the "Add Folder" process detailed above to navigate to their new location.
My clips appear, but when I attempt to ingest a red exclamation point appears and the window displays the message "Error: No Data"
This is one of the most common problems that users experience when trying to ingest their media through the Log and Transfer process. Luckily, it also has one of the easiest solutions.
In the Log and Transfer window, click on the gear icon in the top right and select "Preferences" in the contextual menu that appears.
Make sure the video is set to transcode to the Apple Intermediate Codec and the audio is set to Plain Stereo.
After doing so, hit OK and try to ingest again.
I am experiencing a problem that is not covered in this tip or the solutions here do not work.
The best thing to do at this point would be to trash your preferences and start a new topic in the [FCE Forum|http://discussions.apple.com/forum.jspa?forumID=936&start=0] with a detailed description of your problem. Check out the user tip on [Basic Troubleshooting in Final Cut Express|http://discussions.apple.com/thread.jspa?threadID=2662419] for more information.
This is the 1st version of this tip. It was submitted on December 03, 2010 by skalicki`.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
Working with AVCHD: Log and Transfer FAQs
Log and Transfer was introduced to the product chain in Final Cut Express 4, and is the program's process for ingesting files in the AVCHD format utilizing MPEG-4 AVC/H.264 video coding and either Dolby AC-3 or uncompressed linear PCM audio coding. The most frequently observed problems relating to the Log and Transfer process are generally quite easily addressed.
What should I know before attempting to ingest my footage?
The following facts regarding the Log and Transfer process were adapted from the [Apple Knowledge Base article|http://support.apple.com/kb/TA24840?viewlocale=en_US] on transferring AVCHD in Final Cut Pro 6.0.1 but still hold true for the current version of FCE:
AVCHD support is available only on Intel-based Macintosh computers.
AVCHD camcorders typically connect to computers via USB 2.0, not FireWire.
DVD-based AVCHD camcorders are not supported in Mac OS X 10.4 or earlier.
Standard definition video recorded with AVCHD camcorders cannot be accessed in the Log and Transfer window. SD and HD clips should not be mixed on the same HDD.
Preview of AVCHD video in the Log and Transfer window is limited to 1x forward playback. Scrubbing the playhead does not update the video in the Preview area until you stop scrubbing.
When you choose to transfer AVCHD audio in the Logging area, audio is automatically mixed down to stereo.
AVCHD footage is not ingested natively but is transcoded to the Apple Intermediate Codec.
Apple Intermediate Codec files are significantly larger than the original AVCHD files. FCE does not estimate the size of a transcoded AVCHD file before ingesting, so it is possible to exceed the available space on your capture disk during transfer. Before ingesting, keep in mind that the disk space required is about ten times greater than the size of the native AVCHD file.
Which specific formats can be ingested by Log and Transfer?
Only AVCHD footage can be ingested through the Log and Transfer process. Other formats and variants such as AVCHD Lite are not supported. All video should be recorded in a frame size of either 1440x1080 or 1920x1080 and a frame rate of 25 or 29.97 frames per second. Audio recorded on AVCHD camcorders is generally at a rate of 48kHz. If your camera shoots in a format that does not comply with one of these setups then it is most likely not supported by the application and is not guaranteed to work correctly.
Which Easy Setup preset should I select before ingesting my footage?
It is extremely important to select the preset that matches your media before you attempt to ingest via Log and Transfer. There is only one Easy Setup preset that matches the frame size and rate of your footage. If you intend to ingest AVCHD clips through Log and Transfer you will first need to select one of the following presets:
AVCHD-Apple Intermediate Codec 1440x1080i50
AVCHD-Apple Intermediate Codec 1440x1080i60
AVCHD-Apple Intermediate Codec 1920x1080i50
AVCHD-Apple Intermediate Codec 1920x1080i60
If these four options do not appear under your Easy Setup list then you probably need to run Software Update and update to FCE 4.0.1. DO NOT cycle through the available presets until you find one that works - there is only one preset that matches your media and it should be evident which one to choose by the way it is named. Select the AVCHD preset that mentions your frame size and frame rate (i50 presets support both 50i and 25p frame rates; similarly, i60 presets support both 60i and 29.97p frame rates). If you do cycle through many options in the hope of selecting the correct one through guess-and-check you will probably have corrupted your preference file and need to [trash your preferences|http://support.apple.com/kb/TS2611] before continuing.
Why don't my clips appear when I open the Log and Transfer window?
Make sure your camcorder records AVCHD in a format supported by FCE4. It should be connected to one of your computer's USB ports (never connect it to an external hard drive or other external device such as your keyboard or a USB hub), powered on, and set to video playback mode.
If the camcorder +does not+ mount on your Desktop your USB port or cable may be malfunctioning. Try plugging it in to another port or using a different USB cable to see if it makes a difference.
If the camcorder does mount on your Desktop but the clips do not appear in the Log and Transfer window you will need to point the program to the directory that contains your media.
First, click the Add Folder button in the upper left of the Log and Transfer window. The button looks like this:
Then, you will need to navigate to the root directory in which your media is stored. Most camcorders call this folder "PRIVATE" or "AVCHD" and it should be located at the very top level of the camcorder when mounted. If your camcorder records to a valid AVCHD directory structure then your clips should load after the Add Folder process is completed.
I would like to keep a working backup of my original clips so that I can delete them off the camcorder's internal memory. How should I do this?
There are two main ways to keep a backup of your clips. The first is to ingest every clip on your camcorder through the Log and Transfer process, and store the Apple Intermediate Codec files the application creates in an easily accessible place such as an external FireWire drive. The advantage of this method is that you have the ability to open back up old editing projects, reconnect the media as necessary, and keep going as if you'd never left. However, due to the large amount of space AIC takes up (usually somewhere in the vicinity of 41-50GB an hour when transcoded from AVCHD), this is not always feasible.
Another often preferable approach is to copy over the root directory in which your clips are stored (usually named "PRIVATE" or "AVCHD") from the camcorder to your computer or an external drive. As long as you maintain the original file structure, you will be able to ingest your clips again at a later date using the "Add Folder" process detailed above to navigate to their new location.
My clips appear, but when I attempt to ingest a red exclamation point appears and the window displays the message "Error: No Data"
This is one of the most common problems that users experience when trying to ingest their media through the Log and Transfer process. Luckily, it also has one of the easiest solutions.
In the Log and Transfer window, click on the gear icon in the top right and select "Preferences" in the contextual menu that appears.
Make sure the video is set to transcode to the Apple Intermediate Codec and the audio is set to Plain Stereo.
After doing so, hit OK and try to ingest again.
I am experiencing a problem that is not covered in this tip or the solutions here do not work.
The best thing to do at this point would be to trash your preferences and start a new topic in the [FCE Forum|http://discussions.apple.com/forum.jspa?forumID=936&start=0] with a detailed description of your problem. Check out the user tip on [Basic Troubleshooting in Final Cut Express|http://discussions.apple.com/thread.jspa?threadID=2662419] for more information.
This is the 1st version of this tip. It was submitted on December 03, 2010 by skalicki`.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information. -
I have recently installed Mavericks on my desk top and since then I have been unable to switch off my computer without crashing it. I work with two screen and now I seem to have the menu bar on the second screen as well which I did not have before. Can you please help me?
Dr Bettina, I had similar problems with Mavericks. I installed it on a Mini and a 13" MacBook Pro. I can't speak to your disdplay issues, but I can confirm the inability to logout, shut down, or restarft without a forced, power button shut down. I can also report frequent System Prefs freezes and finder issues, like folder contents taking half a minuite or more to render, or not appearing at all. And while a few Adobe CC apps actually ran faster, InDesign ran like molasses uphill in Decemner.
I tried uninstalling or disabling numerous 3rd party apps and pref panes. I unplugged everything but the keyboard, ran DiskWarrier, repaired permissions, did fsck -f, trashed various preference files, reinstalled the OS... You name it, and I tried it — short of a potion using eye of newt.
After two days of totally hosed productivity, I restored OS 10.8.5 on the Mini so I could actually get some work done. However, I've decided to leave Mavericks on the MBP as a sort of crash dummy, and will install and thoroughly test all updates until stability has been achieved. Then — and only then — will I upgrade the Mini to Mavericks, even if it means waiting 'til a .2 or even .3 update.
Good luck to you... -
Error message an error occurred while signing in " when I worked with Create PDF and at the signed
Error message "an error occurred while signing in " when I worked with Create PDF and at the signed in status. Please help so that I can continu my work.
Hi Stacy,
Thank you for your attention.
I have been working with Create PFD under normal procedures including
sign-in and several documents had been finished. However, when continued
creating another document the computer took a long time to pprocess and
finally a mesage appeared: "An error occurred while signing in" and stopped
there. I clicked the OK button and start creating again and the same
message appeared once more. I tried to log off and log in again in no
avail. So I went to the help site and called for help.
Later, I decided to reboot the computer and tried once more. This time it
worked and I continued creating. Thanks.
laozhao39 -
.psd file not working with Motion 5
I have a .psd that doesn't want to work with Motion 5. Every time I try and import it, Motion says that it's not a valid codec. I can't figurt out what's going on, all my other .psd files seem to work.
Yes, I'm using RGB colors not CMYK (that is the onne known issue thus far).
I'm just totally at a lose. Here's what the console says, if anyone has any insight, I woudl appreciate it:
6/27/11 1:12:55 PM [0x0-0xb50b5].com.apple.motionapp[1326] CPSDSlicesResourceItem::Load(): unsupported slice resource item version (8)
6/27/11 1:12:55 PM Motion[1326] -[ProPSDImageRef initWithPath:] - WARNING - invalid or nonexistent file at /Users/compy/Desktop/PostAppointmetVideo/Corrolary Projects/mockup.psd. Image ref not created.I'd be happy to email one of them to you if you'd like. Or give it to you in some fashion at any rate. I'm not seeing this problem pop up anywhere else on the internet, so I'm guessing it's just me. But it would be nice to check with another motion user.
Email me at jay <no space, just keeping the bots guessing> carr <at> gmail <I'm sure you can guess> com.
It certainly would be nice to see what happens when I give it to you. I'm having some very significant issues with PDFs and can't figure out why... -
my Atv3 is due for an update and ive tried several times to install it but although it downloads it never finishes installing and tells me that it wasnt possible to update and to try another time. I try every other day and it only inches forward in the progress but it never completes the installation. I was tired of waiting and I decided to keep on trying in a period of time one night until it would finally install, that never happened and Im not sure what is going on but the remote stopped working with the atv3 and when I press a button the box light flashes several times but does nothing, ive disconnected it and left it that way for over 24 hrs, ive disconnected everything (tv, internet etc) and nothing. I cant reset the atv3 through the remote either...i dont know what else to do
Hi Brian,
Thanks restoring and restarting didn't fix my problem - i have started it fresh and still it doesn't work. Basically I press ONCE on the remote, after the machine has not had any commands for 10 minutes, and the cursor skips from one end of the menu to the other - so I can't choose network or update software etc - I sometimes manage to stop it randomly in the middle of the menu if I press on a command in the middle of the cursor skipping all the menu steps...not sure what the problem is but I have basically not used my brand new apple tv since I bought it for that reason! I should call Apple support I suppose! grrrr hate wasting time with stuff like this!
Thanks for your help though!
Pernille -
Code works with Dreamweaver CS6 and not with CC
<p><a href="javascript:void(0)" onclick="window.open('http://www.anything.comt', '', 'top=20,left=20,toolbar=0,statusbar=1,scrollbars=1,resizable=1')" title="title">name</a></p> works with Dreamweaver CS6 and not with CC
[Edited Title and moved to Dreamweaver- JTS]I'm not quite sure I understand your point.
I have just tested the Open Browser Window behavior in Dreamweaver CC. It creates slightly different code from Dreamweaver CS6, but it works correctly. This is what is created in the HTML:
<p>my <a href="#" onClick="MM_openBrWindow('http://www.adobe.com/','mywindow','toolbar=yes,location=yes,status=yes,menubar=yes,scrollb ars=yes,resizable=yes')">link</a>
</p>
Dreamweaver CC also adds the following code to the <head> of the page:
<script type="text/javascript">
function MM_openBrWindow(theURL,winName,features) { //v2.0
window.open(theURL,winName,features);
</script>
The definition of the MM_openBrWindow() function is needed in the <head> for the code to work. But it definitely works OK.
With regard to _self and _blank not working, I can't find any problem with the way Dreamweaver CC handles them.
However, if you feel happier working with Dreamweaver CS6, you can download it from the following page:
https://creative.adobe.com/products/dreamweaver
Open the drop-down menu under "In this version", and select Dreamweaver CS6 as shown in the following screenshot:
With Dreamweaver CS6 selected, click the large Download button at the top-right of the page. You can then download CS6, and install it alongside Dreamweaver CC. -
Will iMovies work with Motion 5?
I am getting more and more into film, abandoned buildings are getting crazier the more I go through them. I want to share my videos on YouTube but I would like to have an introduction on the videos, will iMovies work with Motion 5?
Hi Appleman756,
I'm not sure how integrated you want them to be, but you can export your Motion project to use as the intro for your iMovie.
Motion 5: Share to iMovie, GarageBand, and other Apple applications
Share a Motion project to iMovie
Choose Share > Export Movie (or press Command-E).
Choose an export format from the Export pop-up menu.
This menu provides a list of codecs.
Choose None from the “Open with” pop-up menu.
Choose an option from the Include pop-up menu.
If you’ve set In and Out points in the Timeline, use the Duration pop-up menu to choose whether to export the entire sequence or the portion between the In and Out points.
Click Next.
Enter a name and location for the exported file, then click Save.
Motion renders and saves your movie, which can now be imported into an iMovie project using the File menu. For more information, see iMovie Help.
Best,
Nubz -
Endless beach Ball. Impossible to work with Motion.
Impossible to work with Motion since I have my new Apple 23" Cinema display, I did the quick time stand alone thing, got rid of the .plist and just do not know where to go from there. Any suggestion would be appreciated
At this stage, if the whole machine is slowing down I'd suspect a disk or memory problem.
Try the following few things.
1. Run the 'Disk Utility', select each volume in turn and click 'verify volume' for each one.
2. Run the 'Disk Utility', select each volume in turn and click 'verify disk permissions' for each one.
None of the above are destructive, ie they only check for problems, not fix them. Each has a counterpart 'Repiar Volume' and 'Repair permission' which do attempt to fix problems. Use with caution. They are normally very safe to use, and don't normally result in data loss, but I'd be a fool not to say "ensure you have a backup of anything you can't afford to lose."
Finally, just in case something shook loose when you attached the new display, click the Apple menu, select 'About this Mac' and 'More info...' and check that the profile shown matches your expectations in terms of the amount of memory fitted etc etc.
Of course, all of the above may be a little overkill if it's just some weird problem related to the new display, so before doing any of that, put the old display back on and see if the problem goes away. -
Quite a few of my addons don't work with firefox 6, and I would prefer to keep them, but my pc crashed and I had to reformat. I don't want to have to go on a 3rd party site, since they could easily put a virus on my pc. I couldn't find anywhere to download it on the site.
Thanksftp://ftp.mozilla.org/pub/firefox/releases/4.0.1/
Just keep in mind that Firefox 5.0 was a security release for 4.0.1. -
hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus
Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.
Maybe you are looking for
-
System Crash on 9.2 update - locked up Help
Hello! I acquired an iMac with OS 9.1. While on the MAC support site I noticed I could install a 9.2 upgrade. I downloaded it and installed it. On reboot the system freezes up about a 1/4 of the way into start up. Nothing. I've rebooted many times wi
-
This note applies to Oracle bug 1400539 which results in ORA-1461 error. This Oracle error should not occur - it is an Oracle bug as described in bug 1400539. The Oracle support workaround recommendation to set the client NLS_LANG to UTF8 results in
-
Java Docs for the Module Process Classes
Hi, I would like to start creating my own JDBC and file-based modules for interface development. I have found several SDN contributions which step through the creation of these modules. These are very helpful. However, I have not yet found comprehen
-
HT4113 I found a ipod touch and trying to break the passcode to reset to factory.
Found a ipod touch with passcode need info on reseting, or clearing to factory?
-
Ipad2 touch screen has frozen and none of the apps will open. I can't do a shut down to reboot?
My Ipad2 touch screen has frozen and none of the apps will open. I can't do a shut down to reboot?