Working With Multiple CVS Repositories

Does anyone know ... if you have two or more cvs connections defined how would one switch which connection they're committing a workspace/project/file to?
-Brian

Brian,
If you have made changes to your files and they are intended for a different CVS repository, there's no easy way to get those changes across - the safest way is to create a source patch using the CVS command line (diff / rdiff commands) and find a utility which will let you apply the patch to files checked out from the second repository. In the next release of JDeveloper we have added the ability to generate, apply and preview patches from within the IDE so this will be made much easier.
Paul - Team Development Group

Similar Messages

  • Working with Multiple Files in Workspace Layout

    If I was working with multiple files in the workspace layout, they each used to be available for selection from a tab.  Now I can either cascade the files horizontally or vertically - but not have them appear in a tab across the top of the workspace layout.
    Does anyone know how to set the workspace to present multiple files in tabs?  I have CS3.

    Tanya,
    This may not help, but the times when that happens to me is when I go too fast and some operations haven't finished. I then try to select a file that hasn't completed and the file I select is in the process of having the data updated. The worst is when it is trying to render as I am doing something.
    I hope this helps some.
    Mel

  • Working with  multiple layers in CS 3 ?

    In order to work with multiple layers in cs3, I first need to open few images to work with,and when I open few images it only shows last image that I opened.Frist images can't be seen in workspace, and when I open new document I can't see not even one photo I opened?

    try tapping the F key a few times until you get to the screen mode that allows you to see all image windows.

  • Does WRT54GP2 work with multiple ViOP providers ?

    My question is, Does WRT54GP2 router work with multiple ViOP providers ? Can I use it with a ViOP provider other then Vonage ?
    Thanks, John

    Yes you definately can , all you need is a VOIP adapter that supports SIP . It's a standard protocol and is supported by all routers and VOIP providers

  • Reg:working with multiple windows in webdynpro-abap

    Hi ,
    How can we create multiple windows and how can we link them...
    suppose we have 3 fields on first screen .how to move the data from the first screen to second screen..
    Thanks & Regards
    Suman Puthadi

    Hi
    As per your Subject you are looking for "working with multiple windows in webdynpro-abap" and for abap there is a different forum. Web Dynpro ABAP
    Hope its clear to you...
    Even you can read this post when ever you get time Read before posting
    Regards
    Ayyapparaj

  • Problem when working with multiple sequences

    Dears,
    In order to make life easier (I am currently working on a rather long project), I work with multiple sequences, one per chapter.
    My problem: I named one sequence "assembly sequences" in order to add the various sequences. I dropped the sequence no 1, then no 2. All works fine, beside that when playing the sequence no 2, I see two black lines on top and bottom of the screen for the all length of the sequence. Which is not the case when I click on the sequence itself and play it independently.
    Any idea how to solve this ?
    Thanks
    Nic

    Thanks, what happened is that :
    1st sequence is like this : Frame size 720x576 pixels, video rate 25fps, Compressor DV-Pal. And I think it is the one appropriate for me and my country.
    2nd sequence is like this : Frame size 720x480 pixels,
    video rate 29.97 fps, Compressor DV-DVPRO-NTSC.
    I think I should change the second sequence setting, but can I do it after all the work I have done, and continue making a 3rd, 4th and so on ?
    Tx for your precious help,
    Nicolas

  • Why is scrolling not working with multiple youtube embeds layed out vertically in a stack on one page?

    Why is scrolling not working with multiple youtube embeds layed out in a stack on one page?

    Hi ,  
      This is a sort of performance issue , because your program takes more than the max time set for the program to execute in foreground.
    There are many stuff in program which will hamper your performance.
    I will list down a few
    1. SELECT *
    FROM konp
    INTO CORRESPONDING FIELDS OF TABLE konp_itab
    FOR ALL ENTRIES IN a363_itab
    WHERE knumh EQ a363_itab-knumh
    in this statement you are using for all entries a363_itab , but before this statement you are not checking if the table has any entry or not , please do remember that for all entries has this characterstic , that if you internal table does not contain any record , then all the records are selected from the database table. So in this case if you table a363_itab is empty , so what you want is no data must be seelcted from table konp , but what will happen is all the records in KONP will be seelcted.
    2. While retreiving data you are using seelct * even though you do not require all the fields , an example is
    <b>SELECT *
    FROM mkpf
    INTO CORRESPONDING FIELDS OF TABLE mkpf_itab
    FOR ALL ENTRIES IN mseg_itab
    WHERE mblnr EQ mseg_itab-mblnr.</b>
    in this your internal table contains only 2 fields
    <b>mblnr LIKE mkpf-mblnr, "Number of Material Document
    bldat LIKE mkpf-bldat, "Document Date in Document</b> , but to get these 2 fields you are selecting all the fields of the table.
    3. In select you are using into corresponding fields of table , it is not a good practice., so please avoidd it.
    Please understand that you must try to reduce the access to your database tables and try to keep it minimal , because this same thing may happen becasue data in DEV is very less compared to the volume of data in production , so a program working in DEV will take much more time in PRD if not written properly and may result in timeouts , as in your case.
    Please try to make chanegs to the prorgam and see if it works.
    In case you have more queries , please do revert back.
    Regards
    Arun
    *Reward points if replay is helpful

  • Maintain performance while working with multiple shape layers (~50 )

    Hey guys, I've been working on some projects lately where I need to animate a lot of shape layers cascading, arraying, with various animation properties. When I get to the point of using 30-60 or so shape layers, and they're all doing some kind of scale, position, etc. animations, my computer slows to a complete crawl. This then forces me into using a single shape layer and the repeater functions. These can work well sometimes, and don't hamstring the flexibility too much, UNTIL you need to incorporate varying colors. At that point, I usually switch my shape layers to masks and place a layer below with varying colors as needed. The shape animations then reveal those colors, but this doesn't work for a complex object that in itself requires many colors. Sooo...
    What kind of workflows do you all have for working with multiple semi-complex objects at once? I figure I must be missing something, because this has gotten really limiting. Is everyone just working with 256GB of RAM?
    FYI, my computer specs are:
    2 x 2.66 GHz 6-Core Intel Xeon
    32 GB 1333 MHz DDR3 ECC
    ATI Radeon HD 5870 1024 MB
    OS X 10.9.4 (13E28)
    Thanks!!

    Pre-comping can speed up your previews if you are using disk cache, but nothing will speed up  your first ram preview or a ram preview after a keyframe change except a better optimized system. All it takes to slow things down is one effect or a footage file that causes AE to start consuming memory and processor power.
    As a test I just created a gradient filled rectangle, added rotation keyframes, duplicated the layer so I have 64 copies on my Mac Mini and tried a ram preview compared with the same comp with only 1 layer. Almost no difference in the time it took to preview 10 seconds. Threw in a scale transform for all layers and again, not much difference between one shape layer and 64. To make things much harder I change the rectangle to a Polystar and animated everything in the Polystart transform properties, set up a composition with 128 duplicates and a comp with one layer. 2.5 seconds for a ram preview at quarter rez for a single layer, 10 seconds for a ram preview for 128 layers. That's more than acceptable to me for a two year old Mac Mini with 16 gb of ram. Increasing the zoom factor to 50% with Resolution set to Auto doubled the ram preview time which was still acceptable.
    This makes me wonder what else is going on in your composition. Any effects or other things going on? Have you optimized your system for maximum performance? There are links with suggestions for doing that all over this site as well as the Adobe recommendations found here: Optimizing After Effects Performance

  • When working with multiple artboards, are there separate layers panels for each artboard?

    Just started working with multiple artboards in ai but have read nothing about the layers panel, whether you use one layers panel for all the artboards or if the layers panel is duplicated so there is one for each artboard.

    I don't really understand your problem, but I've had headaches with managing a GUI before (as many programmers have, I'm sure).
    My best advice, if the scheme your using to build and manage a GUI is too confusing for you, the programmer, to easily understand/manage, change the scheme. Even if this means recoding a good deal of your program (though, hopefully, you've kept the GUI as seperate from your functional code as possible) it should be worth it.
    Perhaps a clearer explination of your problem would help better illustrate your problem?
    -Rejun

  • How do icloud and itunes match work with multiple libraries?

    How do icloud and itunes match work with multiple libraries?

    This forum is for troubleshooting compatibility issues between Macs and Windows, not iTunes. You'll probably want to repost your question in the iTunes discussions:
    http://discussions.apple.com/category.jspa?categoryID=150

  • Print to pdf often doesn't work with multiple pages?

    When I try to print to pdf, it often doesn't work right.
    I can select, for example, multiple Excel worksheets to print. It looks fine with 4 pages in Preview, but when I select save as .pdf, it only prints 2 of the 4 pages, and it prints those in 2 separate documents rather than a single .pdf document with multiple pages.
    Is there a way to do this? Is this an Apple error or Microsoft error? Since it looks fine in Preview, my guess it is an Apple error?
    Mark

    It sounds like this is the problem with the way Apple handles multiple orientations in a pdf document. You can use Acrobat to print the files - it handles multiple orientations correctly. There was a previous thread on this:
    http://discussions.apple.com/message.jspa?messageID=1983431#1983431

  • Policy Enforcement issues in AM 7.1 with multiple user repositories

    Hello,
    We have a scenario where we need to authenticate and authorize both ADAM and Sun Directory Server users into a web application through the same realm. The realm is setup with 2 identity repositories - one for ADAM and one for DS - both of type LDAP v3 Repo. Authentication into AM console through the ?realm=name parameter works fine in this setup for users from both repositories.
    However, when we try to authenticate users into the protected web application as an AD/DS user, policy enforcement is not deterministic. Policy Agent starts allowing URL access to DENIED users also. Is this a known issue/bug with Sun Access Manager 7.1?
    The policy agents in our setup are Apache, Tomcat and IIS 6.
    Thanks,
    Srinivas

    Please provide more information. If I understand you correctly, you have a realm with 2 LDAP Auth modules configured. Are these part of an Auth Chain? What does that Chain look like? Both Required? Sufficient?
    What does your URL policy look like?
    Have you made sure AM Agent is not set to SSO_ONLY?
    What do you mean by "Policy Agent starts allowing URL access to DENIED users also"? You see "DENIED" in a log file but the user gets through, or you are just reporting the behavior?
    Thanks,
    Eric

  • Working with multiple audio tracks

    Hello,
    I'm working with video clips that have a stereo audio track (guide audio fed into the camera) synch'ed to 4 mono tracks (recorded from a variety of boom mics and lavaliers).
    Although I've linked all the audio clips to the video, it still gets a bit cumbersome when performing T or L cuts. When I hold down the Option key, I still have to adjust each of the audio track separately.
    Is there a more efficient way to deal with multiple audio tracks? Maybe some way to treat these audio tracks as one unit?
    BTW I'm working in FCP 7.
    Thanks,
    Thien

    One way:
    Lock the video track.
    Use the Edit Selection Tool to Select the audio transition points
    This will automatically open the Trim window, where you can move the cut point - in this case I am moving the audio cut(s) 30 frames later than the video cut:
    which gives me the displacement of all the tracks that I wanted:
    You can use this quite quickly once you get used to it.
    MtD

  • H:inputtext not working with multiple forms in JSF2.2

    h:inputText is not working in the latest JSF2.2 with multiple forms. I have 2 forms
    form1 have: one command button and one input text
    form2 has: one input text and one output label
    on click of command button in form1, i am rendering the form2(both outputlabel and input text).
    but only output label is rendered properly with correct values (corresponding getter method gets called and value is displaying) but the input text is not calling the corresponding getter method hence showing null.
    Note: we noticed this issue only if we use multiple forms, within single form its working fine. also it worked fine in JSF2.0
    Version used: JSF api - 2.2 (com.sun.faces) JSF impl - 2.2 (com.sun.faces)
    let me know if anyone have solution to handle this.
    the forms are not nested and both the beans are in View scope.  
    <h:form id="form1" prependId="false">
    <a4j:commandLink id="actionEdit" title="Click" action="#{bean.action}" 
    render="paymentInstructionDetail" styleClass="iconLarge edit" />
    </h:form>
    <h:form id="form2" prependId="false">
      <a4j:outputPanel ajaxRendered="true" id="paymentInstructionDetail">
      <h:inputText value="#{bean1.amount}" id="sample"/>
      <h:outputLabel value="#{bean1.amount}" id="sampleLabel"/>
     </a4j:outputPanel>
    </h:form>

    Your link doesn't work. Do you mind reporting it?

  • Working with multiple applications open

    I was wondering if having multiple applications open has a negative effect on the speed of my RAM. Someone told me that it's actually a good thing to have more than one open at a time in OS X. Could that be true?
    I'm interested because I only have 256 MB and I use Photoshop CS (a real memory hog) a lot for manipulating big images. I'm also online pretty much all the time.
    Thank you.
    Allan

    Yeah, I think I see those beach balls in my sleep! Thanks Littleshoulders for the link. It's really helpful. I think I'll buy that ebook when I can. The other link on my previous post that led somewhere on this site helped a lot, too. The more I learn, the better.
    So I guess that's a fallacy that it's good to have many apps open at a time, especially Photoshop and the huge images I work with. You know, I'm sure I read that in a book about using OS X. I don't see how there would be a benefit to have multiple apps open.
    I think RAM will be my next purchase, followed, of course, by a newer, more powerful Mac.

Maybe you are looking for