Working with multiple excel spreadsheets

From what I was able to realize so far, looks like Crystal Reports SDK for Java doesn't support exporting a report to multiple spreadsheets in a single workbook, right? If it does support, how can this be done?
My thought to accomplish this requirement was to obtain the File object resulting from exporting a report, and then handle this file object with Apache POI, adding the other spreadsheets dinamically. The question would be, how can I obtain a File object in this scenario?
I'm using Crystal Reports Java Reporting Component 11.8.0 plug-in that comes with Rational Software Architect.
Thanks!

Hi,
Do you want to switch to different spreadsheets that included in one Excel file?
If so, you can use CTRL+PgUp(Switches between worksheet tabs, from left-to-right) or CTRL+PgDn (Switches between worksheet tabs, from right-to-left).
http://office.microsoft.com/en-001/excel-help/keyboard-shortcuts-in-excel-2010-HP010342494.aspx
If there is anything else that I can do for you regarding this issue, feel free to post back.
Best regards,
Greta Ge
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Similar Messages

  • Working with Multiple Files in Workspace Layout

    If I was working with multiple files in the workspace layout, they each used to be available for selection from a tab.  Now I can either cascade the files horizontally or vertically - but not have them appear in a tab across the top of the workspace layout.
    Does anyone know how to set the workspace to present multiple files in tabs?  I have CS3.

    Tanya,
    This may not help, but the times when that happens to me is when I go too fast and some operations haven't finished. I then try to select a file that hasn't completed and the file I select is in the process of having the data updated. The worst is when it is trying to render as I am doing something.
    I hope this helps some.
    Mel

  • Working with  multiple layers in CS 3 ?

    In order to work with multiple layers in cs3, I first need to open few images to work with,and when I open few images it only shows last image that I opened.Frist images can't be seen in workspace, and when I open new document I can't see not even one photo I opened?

    try tapping the F key a few times until you get to the screen mode that allows you to see all image windows.

  • Does WRT54GP2 work with multiple ViOP providers ?

    My question is, Does WRT54GP2 router work with multiple ViOP providers ? Can I use it with a ViOP provider other then Vonage ?
    Thanks, John

    Yes you definately can , all you need is a VOIP adapter that supports SIP . It's a standard protocol and is supported by all routers and VOIP providers

  • Reg:working with multiple windows in webdynpro-abap

    Hi ,
    How can we create multiple windows and how can we link them...
    suppose we have 3 fields on first screen .how to move the data from the first screen to second screen..
    Thanks & Regards
    Suman Puthadi

    Hi
    As per your Subject you are looking for "working with multiple windows in webdynpro-abap" and for abap there is a different forum. Web Dynpro ABAP
    Hope its clear to you...
    Even you can read this post when ever you get time Read before posting
    Regards
    Ayyapparaj

  • Problem when working with multiple sequences

    Dears,
    In order to make life easier (I am currently working on a rather long project), I work with multiple sequences, one per chapter.
    My problem: I named one sequence "assembly sequences" in order to add the various sequences. I dropped the sequence no 1, then no 2. All works fine, beside that when playing the sequence no 2, I see two black lines on top and bottom of the screen for the all length of the sequence. Which is not the case when I click on the sequence itself and play it independently.
    Any idea how to solve this ?
    Thanks
    Nic

    Thanks, what happened is that :
    1st sequence is like this : Frame size 720x576 pixels, video rate 25fps, Compressor DV-Pal. And I think it is the one appropriate for me and my country.
    2nd sequence is like this : Frame size 720x480 pixels,
    video rate 29.97 fps, Compressor DV-DVPRO-NTSC.
    I think I should change the second sequence setting, but can I do it after all the work I have done, and continue making a 3rd, 4th and so on ?
    Tx for your precious help,
    Nicolas

  • Why is scrolling not working with multiple youtube embeds layed out vertically in a stack on one page?

    Why is scrolling not working with multiple youtube embeds layed out in a stack on one page?

    Hi ,  
      This is a sort of performance issue , because your program takes more than the max time set for the program to execute in foreground.
    There are many stuff in program which will hamper your performance.
    I will list down a few
    1. SELECT *
    FROM konp
    INTO CORRESPONDING FIELDS OF TABLE konp_itab
    FOR ALL ENTRIES IN a363_itab
    WHERE knumh EQ a363_itab-knumh
    in this statement you are using for all entries a363_itab , but before this statement you are not checking if the table has any entry or not , please do remember that for all entries has this characterstic , that if you internal table does not contain any record , then all the records are selected from the database table. So in this case if you table a363_itab is empty , so what you want is no data must be seelcted from table konp , but what will happen is all the records in KONP will be seelcted.
    2. While retreiving data you are using seelct * even though you do not require all the fields , an example is
    <b>SELECT *
    FROM mkpf
    INTO CORRESPONDING FIELDS OF TABLE mkpf_itab
    FOR ALL ENTRIES IN mseg_itab
    WHERE mblnr EQ mseg_itab-mblnr.</b>
    in this your internal table contains only 2 fields
    <b>mblnr LIKE mkpf-mblnr, "Number of Material Document
    bldat LIKE mkpf-bldat, "Document Date in Document</b> , but to get these 2 fields you are selecting all the fields of the table.
    3. In select you are using into corresponding fields of table , it is not a good practice., so please avoidd it.
    Please understand that you must try to reduce the access to your database tables and try to keep it minimal , because this same thing may happen becasue data in DEV is very less compared to the volume of data in production , so a program working in DEV will take much more time in PRD if not written properly and may result in timeouts , as in your case.
    Please try to make chanegs to the prorgam and see if it works.
    In case you have more queries , please do revert back.
    Regards
    Arun
    *Reward points if replay is helpful

  • Maintain performance while working with multiple shape layers (~50 )

    Hey guys, I've been working on some projects lately where I need to animate a lot of shape layers cascading, arraying, with various animation properties. When I get to the point of using 30-60 or so shape layers, and they're all doing some kind of scale, position, etc. animations, my computer slows to a complete crawl. This then forces me into using a single shape layer and the repeater functions. These can work well sometimes, and don't hamstring the flexibility too much, UNTIL you need to incorporate varying colors. At that point, I usually switch my shape layers to masks and place a layer below with varying colors as needed. The shape animations then reveal those colors, but this doesn't work for a complex object that in itself requires many colors. Sooo...
    What kind of workflows do you all have for working with multiple semi-complex objects at once? I figure I must be missing something, because this has gotten really limiting. Is everyone just working with 256GB of RAM?
    FYI, my computer specs are:
    2 x 2.66 GHz 6-Core Intel Xeon
    32 GB 1333 MHz DDR3 ECC
    ATI Radeon HD 5870 1024 MB
    OS X 10.9.4 (13E28)
    Thanks!!

    Pre-comping can speed up your previews if you are using disk cache, but nothing will speed up  your first ram preview or a ram preview after a keyframe change except a better optimized system. All it takes to slow things down is one effect or a footage file that causes AE to start consuming memory and processor power.
    As a test I just created a gradient filled rectangle, added rotation keyframes, duplicated the layer so I have 64 copies on my Mac Mini and tried a ram preview compared with the same comp with only 1 layer. Almost no difference in the time it took to preview 10 seconds. Threw in a scale transform for all layers and again, not much difference between one shape layer and 64. To make things much harder I change the rectangle to a Polystar and animated everything in the Polystart transform properties, set up a composition with 128 duplicates and a comp with one layer. 2.5 seconds for a ram preview at quarter rez for a single layer, 10 seconds for a ram preview for 128 layers. That's more than acceptable to me for a two year old Mac Mini with 16 gb of ram. Increasing the zoom factor to 50% with Resolution set to Auto doubled the ram preview time which was still acceptable.
    This makes me wonder what else is going on in your composition. Any effects or other things going on? Have you optimized your system for maximum performance? There are links with suggestions for doing that all over this site as well as the Adobe recommendations found here: Optimizing After Effects Performance

  • When working with multiple artboards, are there separate layers panels for each artboard?

    Just started working with multiple artboards in ai but have read nothing about the layers panel, whether you use one layers panel for all the artboards or if the layers panel is duplicated so there is one for each artboard.

    I don't really understand your problem, but I've had headaches with managing a GUI before (as many programmers have, I'm sure).
    My best advice, if the scheme your using to build and manage a GUI is too confusing for you, the programmer, to easily understand/manage, change the scheme. Even if this means recoding a good deal of your program (though, hopefully, you've kept the GUI as seperate from your functional code as possible) it should be worth it.
    Perhaps a clearer explination of your problem would help better illustrate your problem?
    -Rejun

  • How do icloud and itunes match work with multiple libraries?

    How do icloud and itunes match work with multiple libraries?

    This forum is for troubleshooting compatibility issues between Macs and Windows, not iTunes. You'll probably want to repost your question in the iTunes discussions:
    http://discussions.apple.com/category.jspa?categoryID=150

  • Print to pdf often doesn't work with multiple pages?

    When I try to print to pdf, it often doesn't work right.
    I can select, for example, multiple Excel worksheets to print. It looks fine with 4 pages in Preview, but when I select save as .pdf, it only prints 2 of the 4 pages, and it prints those in 2 separate documents rather than a single .pdf document with multiple pages.
    Is there a way to do this? Is this an Apple error or Microsoft error? Since it looks fine in Preview, my guess it is an Apple error?
    Mark

    It sounds like this is the problem with the way Apple handles multiple orientations in a pdf document. You can use Acrobat to print the files - it handles multiple orientations correctly. There was a previous thread on this:
    http://discussions.apple.com/message.jspa?messageID=1983431#1983431

  • Problem with embedded excel spreadsheet in Word document.

    I am having trouble with a word document that has an embedded excel spreadsheet in it.  If you double click on the spreadsheet to edit it, the following error message appears:
    "The program used to create this object is Excel.  That program is not installed on your computer.  To edit this object, you must install a program that can open the object."
    I know that Excel is installed on the PC.  The PC is running Windows XP SP3 x86 and Office Professional Plus 2007.  I have tried editing the spreadsheet on a PC running Windows 7
    Pro x64 with the same version of office and it works just fine.  I cannot find any differences in the setting between the two so I do not know why it works one place but not the other.
    Any ideas?

    If you double click on an Excel file in Windows Explorer, does Excel startup?  If not, right click on such a File and used the Open with item to set Excel as the default program for opening such files.
    If you need to do that, it may also overcome the issue with the embedded worksheet.
    Hope this helps.
    Doug Robbins - Word MVP,
    dkr[atsymbol]mvps[dot]org
    Posted via the Community Bridge
    "Flyguy009" wrote in message news:[email protected]...
    I am having trouble with a word document that has an embedded excel spreadsheet in it.  If you double click on the spreadsheet to edit it, the following error message appears:
    "The program used to create this object is Excel.  That program is not installed on your computer.  To edit this object, you must install a program that can open the object."
    I know that Excel is installed on the PC.  The PC is running Windows XP SP3 x86 and Office Professional Plus 2007.  I have tried editing the spreadsheet on a PC running Windows 7 Pro x64 with the same version of office and it works just fine. 
    I cannot find any differences in the setting between the two so I do not know why it works one place but not the other.
    Any ideas?
    Doug Robbins - Word MVP dkr[atsymbol]mvps[dot]org

  • Why did Firefox intervened to move data while working with an Excel file; cannot locate the data.

    Downloaded Firefox 2wks ago. Just now working with a large Excel spreadsheet when something happened losing all 6 sheets of data. My file location now shows sheet data as Firefox Document. Now I can't retrieve this file of data; it was financial data! What happened for Firefox to intervene?

    No, Sir. I was strictly working within a newly created Excel file. Actually, Internet Explorer is current browser.
    Thank you for interest and any suggestion.
    Re-thinking thru this, it is probable I downloaded the base data thru FIREFOX. I was working with the project on an Excel spread sheet when I lost the data. The sheets still exist but the data is missing. Very strange.

  • My Labview Report generator is not working with 2013 excel version

    Hi All,
    My report generator tool kit which was developpend using labview 2011 was workign with excel 2010...after that i installed 2013 excel and the code is not working..
    Do i need to enable some setting to work with excel 2013.
    Basically this generator tool will copy the charts from excel and paste in power point...Please let me know.
    Thanks,
    Hareesh

    Ah, I understand now - I had assumed you were using the NI Toolkit.
    If you're not using the report generation toolkit, did you write your own VIs for communicating with Office or are you using a different toolkit? If you're using ActiveX to communicate with Office it may be that the ActiveX API has changed for Office 2013 - you will probably need to modify your program for the new calls.
    Since it wasn't as obvious as I thought with the report generation toolkit, it would help if you posted some code to try and understand what might be happening. Are you getting any errors in your application when you try to use Office 2013?
    Certified LabVIEW Architect, Certified TestStand Developer
    NI Days (and A&DF): 2010, 2011, 2013, 2014
    NI Week: 2012, 2014
    Knowledgeable in all things Giant Tetris and WebSockets

  • Working with multiple audio tracks

    Hello,
    I'm working with video clips that have a stereo audio track (guide audio fed into the camera) synch'ed to 4 mono tracks (recorded from a variety of boom mics and lavaliers).
    Although I've linked all the audio clips to the video, it still gets a bit cumbersome when performing T or L cuts. When I hold down the Option key, I still have to adjust each of the audio track separately.
    Is there a more efficient way to deal with multiple audio tracks? Maybe some way to treat these audio tracks as one unit?
    BTW I'm working in FCP 7.
    Thanks,
    Thien

    One way:
    Lock the video track.
    Use the Edit Selection Tool to Select the audio transition points
    This will automatically open the Trim window, where you can move the cut point - in this case I am moving the audio cut(s) 30 frames later than the video cut:
    which gives me the displacement of all the tracks that I wanted:
    You can use this quite quickly once you get used to it.
    MtD

Maybe you are looking for