Working with Multiple Files in Workspace Layout

If I was working with multiple files in the workspace layout, they each used to be available for selection from a tab. Now I can either cascade the files horizontally or vertically - but not have them appear in a tab across the top of the workspace layout.
Does anyone know how to set the workspace to present multiple files in tabs? I have CS3.

Tanya,
This may not help, but the times when that happens to me is when I go too fast and some operations haven't finished. I then try to select a file that hasn't completed and the file I select is in the process of having the data updated. The worst is when it is trying to render as I am doing something.
I hope this helps some.
Mel

Similar Messages

Working with multiple files in Library module

Hello,
I am trying to work with a subset of files in the Library module. Doing things like delete, rotate, flag etc. I select the files by Ctrl-Click (WXP) and then try to do the function--sometimes it works, other times it may delete or roate the wrong file. How can I get this to work everytime?
TIA,
Tanya

Tanya,
This may not help, but the times when that happens to me is when I go too fast and some operations haven't finished. I then try to select a file that hasn't completed and the file I select is in the process of having the data updated. The worst is when it is trying to render as I am doing something.
I hope this helps some.
Mel

Working with multiple files

I'm trying to develop a simple program using three files; One which will be the main class, one which will be called by main, and another that will be an interface.
Should I include the "public static void main(String args[]) {" line in the file which will be called by the main class file?
Thanks in advance for any help!

should I include the "public static void main(String args[]) {"
line in the file which will be called by the main class file?every app has an entry point: a point that tells JVM to where to 'beguin/start/entry' the program
that's the main method(), the one you refer
you can have an app with how many classes and interfaces you want.
Then you just need ONE class with a MAIN method (actually you can only have one of that)
that a look at this very easy app:
interface Pet {
    String itsSound();
class Dog implements Pet {
    public String itsSound() {
         String a = "auau";
         return a;
class Cat implements Pet {
    public String itsSound() {
         String a = "miau";
         return a;
class Xpto {
    public static void main(String[] args) { // the MAIN method
          Sound bibi = new Dog();
          String s = bibi.itsSound();
          System.out.println(s);
}

Variable Substitution not working for multiple files

Hi,
Have a scenario in which we are using Interface Collection with multiple files as output.
The naming of the files is derived from a payload field as follows.
payload:MT_OrdersAck,1,Order,1,File_Header,1,StoreNo,1
When the first file is generated this works fine, but fails for the rest of the files.
I guess this is because of the hardcoding 1 in
payload:MT_OrdersAck,1,Order,1,File_Header,1,StoreNo,1
how do we get around this problem?
Any Ideas?

Hi, I suppose you are using Mapping-Based Message Split, right? Do the following files look the same like the first file with respect to File_Header?
Make sure that the payload structure (payload:MT_OrdersAck,1,Order,1,File_Header,1,StoreNo,1) is equal in all files and that first occurrence of StoreNo always has a value in all the files.
Regards, Martin

Working with multiple layers in CS 3 ?

In order to work with multiple layers in cs3, I first need to open few images to work with,and when I open few images it only shows last image that I opened.Frist images can't be seen in workspace, and when I open new document I can't see not even one photo I opened?

try tapping the F key a few times until you get to the screen mode that allows you to see all image windows.

Working with flat file as source in owb 10.2

Hi,
I am working with flat file as source . While validating the mapping i am getting the following error like
" to specify a data file configure the mapping , add a node under ' Source data file', type in the file name
and select the file location."
Please give me the suggestion . It is very urgent.

Hi Venkat,
I tried the following stepts.
1. in Design Center select your mapping and right click and select configure
2. select sql loader data files and select create
3. On right hand side data file Name : enter your source file name (ex : source.csv)
4. click ok button.
5. open mapping and validate.
The mapping is validating. After validating I deployed the mapping. Up to this the mapping is working fine.
But when I start the mapping, It has completed with errors.
The error message is:
Status
Error Log
RPE-01013: SQL Loader reported error condition, number 1.
LRM-00112: multiple values not allowed for parameter 'control'
Job Summary
Updated : 2009-02-24 15:32:43.0 Job Final Status : Completed with errors Job Processed Count : 1 Job Error Count : 1 Job Warning Count : 0
Please give me the suggestions.
Thanks,
Venkat

Maintain performance while working with multiple shape layers (~50 )

Hey guys, I've been working on some projects lately where I need to animate a lot of shape layers cascading, arraying, with various animation properties. When I get to the point of using 30-60 or so shape layers, and they're all doing some kind of scale, position, etc. animations, my computer slows to a complete crawl. This then forces me into using a single shape layer and the repeater functions. These can work well sometimes, and don't hamstring the flexibility too much, UNTIL you need to incorporate varying colors. At that point, I usually switch my shape layers to masks and place a layer below with varying colors as needed. The shape animations then reveal those colors, but this doesn't work for a complex object that in itself requires many colors. Sooo...
What kind of workflows do you all have for working with multiple semi-complex objects at once? I figure I must be missing something, because this has gotten really limiting. Is everyone just working with 256GB of RAM?
FYI, my computer specs are:
2 x 2.66 GHz 6-Core Intel Xeon
32 GB 1333 MHz DDR3 ECC
ATI Radeon HD 5870 1024 MB
OS X 10.9.4 (13E28)
Thanks!!

Pre-comping can speed up your previews if you are using disk cache, but nothing will speed up your first ram preview or a ram preview after a keyframe change except a better optimized system. All it takes to slow things down is one effect or a footage file that causes AE to start consuming memory and processor power.
As a test I just created a gradient filled rectangle, added rotation keyframes, duplicated the layer so I have 64 copies on my Mac Mini and tried a ram preview compared with the same comp with only 1 layer. Almost no difference in the time it took to preview 10 seconds. Threw in a scale transform for all layers and again, not much difference between one shape layer and 64. To make things much harder I change the rectangle to a Polystar and animated everything in the Polystart transform properties, set up a composition with 128 duplicates and a comp with one layer. 2.5 seconds for a ram preview at quarter rez for a single layer, 10 seconds for a ram preview for 128 layers. That's more than acceptable to me for a two year old Mac Mini with 16 gb of ram. Increasing the zoom factor to 50% with Resolution set to Auto doubled the ram preview time which was still acceptable.
This makes me wonder what else is going on in your composition. Any effects or other things going on? Have you optimized your system for maximum performance? There are links with suggestions for doing that all over this site as well as the Adobe recommendations found here: Optimizing After Effects Performance

Generate Proxy from WSDL with multiple Files

I need to load a WSDL (to generate a web service consumer proxy). However, that WSDL is build from multiple files, both .wsdl and .xsd, not a single one. It seems the SAP wizard to generate the proxy does expect one single WSDL file however.
Is there a way in SAP to load a WSDL with multiple files, or do I need to (manually) flatten all these files into one single file?

I am not sure why it fails in WebSphere. Please try posting
this question to a WebSphere newsgroup.
Regards,
-manoj
http://manojc.com
"viswanath" <[email protected]> wrote in message
news:40aee7fa$1@mktnews1...
>
thanks manoj for your reply.
I'm using IBM WebSphere SDK for Web Services v5.1
for generation of java client.
I'm able to generate the client but the problem is
the WSDl2Java command ignored the SOAPHeaders while
generating the proxy. Since I'm using SOAP headers for
authentication the code fails.
Thanks,
Viswanath
"manoj cheenath" <[email protected]> wrote:
I am not sure which tool you are using
to generate web service clent. To generate
a WLS web service client you have to use clientgen.
Details here:
http://e-docs.bea.com/wls/docs81/webserv/anttasks.html
Regards,
-manoj
http://manojc.com
"viswanath" <[email protected]> wrote in message
news:40ad8a07$[email protected]..
HI,
I have a web service (implemented in .NET) which extends soap headersfor
doing
Authentication. WSDL is generated out of this web service. But wheni use
wsdl2java
(J2EE) to generate a proxy class, there is no interface generated forsoap
headers.
Without extending SOAP headers the web service works fine.
Basically, I'm looking for a way to generate java interfaces (ie.
proxies)
for
SOAP headers out of the WSDL file.
PFA the WSDL file and the proxy
Any help on this is appreciated.

Has anyone not working with .dv files had synchronization problems?

Has anyone not working with .dv files had sound synchronization problems? I'm not exactly sure what the alternatives to DV are, but I think one of them is HD.
The reason for asking this question is to help isolate the nature and cause of a very serious flaw in iMovie '11. In the original release of iMovie '11 (version 9.0) there was a small--but serious--synchronization problem. In the 9.01 there is a large synchronization problem. We know of one person who has not experienced the problem, and he is not working with DV files (media). So we want to find out if anyone who is using something other than .dv files is experiencing a lack of synchronization between sound and picture. Knowing the answer to this will help with figuring out where the cause lies. For the initial iMovie '11 release (9.0), you probably would not notice a problem unless you had very long event-clips, e.g., two hours long. Events get this long if you are transferring from analog 8 mm tapes. Even then, it would have to be in scenes in which the connection between event and sound is obvious, e.g., close ups of people talking. It isn't until the 9.01 release that most people would notice anything. All we need to do is establish one case of a synchronization problem in which the person is using something other than DV.
Message was edited by: Paul Bullen

Hopefully, the 9.0.2 release will make my question moot. Zyfert must have posted the announcement of the release just as I was formulating my question. Still, if you have information on the subject, it would be interesting to hear.

Working with RAW files in PSE9: Doable or better to use PSE12?

I have PSE 9 and will soon get a camera with RAW capability. I notice that Adobe no longer supports PSE 9. Am I in for trouble if I don't upgrade to PSE 12 since I don't know how to work with RAW files? It sounds as if I will need something to convert RAW files? Where do I get it? Is it a big deal for a beginner with no software skills?

You can download a free DNG Converter from Adobe and then convert your RAWs to DNGs which can be used in PSE9.
You don't need PSE12, but if you want to purchase PSE 12, you get the most current features in the Raw processor (which in my opinion is a huge improvement over what is available in PSE9), and you don't need the extra step of converting to DNG.

Very slow responce when working with Office file on DFS-Share

Very slow responce when working with Office file on DFS-Share
We have implemented the following configuration
Domain level Windows 2000. Two member servers with Windows Server 2008 R2, sharing the same DFS namespace with, at the moment, one folder target called Home.
Users complaining that the access to different MS Office files is very slow. Even creating a new MS Word document using right click context menu takes up to 4 minutes to open. Saving, for example, one singe Excel sheet takes also few minutes.
Tested with both, MS Office 2007 and MS Office 2010. Makes no difference. When using Office 2010 you can see the message like contacting:
\\DomainName\Root\Home\UserName. Other files like TXT, JPG or PDF are not affected.
What makes the thing really weird is the fact, that the behavior described above can absolutely change after client machine being rebooted, suddenly everything becomes very fast and this condition can revert back again just after the next
reboot.
Considerations until now:
1. This has nothing to do with the file size. Even tiny files are affected.
2. AD Sites are configured correctly and the client workstations see themselves in the correct sites.
3. This is not an Office issue. If I map my folder target not as DFS, but directly as shared network drive
\\ServerName\Root\Home\UserName , everything functions as expected
What makes me suspicious: when using f.e. TCPView to monitor connections, I can see, that each time I make any operation on an office file, there will be a connection established to one of the domain controllers, sometimes to remote ones,
located in other countries. But on the other side, even if the connection is established to the nearest DC, operations are still very very slow!
Just forget to say. All clients are Windows 7
Thanks to all who respond.

Dear all,
sorry for the delayed reply. The problem has been solved now and since September 19<sup>th</sup>. everything is functioning as expected.
What was done:
Deleted replication targets excepting the initial ones
Carefully recreated folder targets
Deleted and recreated replication groups
Disabled SNP features on both namespace servers
Created EnableTCPA registry entry
Checked that the following Updates are installed
http://support.microsoft.com/kb/2688074
http://support.microsoft.com/kb/2647452
Concering Office File validation KB2553065 - This Update was already declined on our WSUS server
Kind Regards
Eduard

Working with RAW files in iPhoto 5.0.4 and Elements 4.0.1

I take photos in RAW mode and download them to iPhoto. When I try to edit the photo in iPhoto, the picture is a tiny little file that is impossible to enlarge with any sort of clarity. Also, the word "RAW" does not appear anywhere on the iPhoto window like I read it is supposed to.
When I drag the file to Photoshop Elements, I get an editing window that has none of the tools usually associated with JPEG files. I get a separate window in which I can darken or lighten the image, that's it.
Clearly, I'm doing something wrong. No one in their right mind would ever use RAW if this is how it works.
Any ideas?

Hi Jack!
If you're new working with RAW files, your right, it just doesn't make sense. RAW <imho> is a bit overrated. One thing you will need to keep in mind when shooting in RAW, is you will still need to take a well exposed image. What RAW files will allow are CHANGES in all areas of the image v. JPEG which may allow you to ADJUST a few settings in the image. My only suggestion would be to kepp playing around with PSE until you get the hang of it, it is an excellent image editing software. But realize, a well exposed JPEG and RAW file are hard to tell apart...
Personally, I do not directly download RAW files through iPhoto but will create a folder and download to here, and simply drage folder to iPhoto to import (which are then 'converted' into JPEG files). This way I have the original RAW images safely located outside of iPhoto as well as in iPhoto. You should set Elements as your choice of application to edit files inside iPhoto.
Good luck, Rick
Good link: http://www.elementsvillage.com/forums/ and just for fun: http://www.photoshopcosmetics.com/index.php

Working with Large files in Photoshop 10

I am taking pictures with a 4X5 large format film camera and scanning them at 3,000 DPI, which is creating extremely large files. My goal is to take them into Photoshop Elements 10 to cleanup, edit, merge photos together and so on. The cleanup tools don't seem to work that well on large files. My end result is to be able to send these pictures out to be printed at large sizes up to 40X60. How can I work in this environment and get the best print results?

You will need to work with 8bit files to get the benefit of all the editing tools in Elements.
I would suggest resizing at resolution of 300ppi although you can use much lower resolutions for really large prints that will be viewed from a distance e.g. hung on a gallery wall.
That should give you an image size of 12,000 x 18,000 pixels if the original aspect ratio is 2:3
Use the top menu:
Image >> Resize >> Image Size

Unexpected problem: uncaught exception when working with audio files in Soundtrack Pro

Hey,
Whenever I double click an audio file in the timeline to work on it, I end up getting the Error message: "Unexpected problem: uncaught exception" and Soundtrack Pro eventually crashes. Also, this happens when I try to work with audio files in the file editor. I have Leopard and am using Logic Studio 8. Any insight would be much appreciated. Thanks
Matt

Didnt know how to remove the original clip from the STP arrange window - or whatever it's called in STPro. So I could go no further in my perverse science experiment.
It also appeared that I could only import an aif but not a wav?
I gave up on STPro and did what I needed to do in Logic, which I use regularly.
Thank you for folowing up on this.
PS. I used to use an old PowerPC version (1.0.3) of STPro and loved the way it visually showed the change in the waveform when you added each efffect. It appears that the new version (3.0.1) does not allow you to do this anymore? You can render or flatten the effects to see the final waveform, but then you are dead in the water and cant make changes?
Im such a newbie at STPro that I am probably not using it right?

Help: Working with .MOV files in FCP and forced to RENDER FOR EVERY EDIT

I'm working with .MOV files from my digital camera in Final Cut Pro and every time I make a new edit, I have to render it in order to see it in the canvas.
How do I make it so that I don't have to render every edit in order to see it?
(I've worked with files straight from a DV camera, and editing went fine. I'm assuming it has to do with the .MOV files)

DV Cameras are not the same thing as a Digital camera. Digital cameras offer video on a limited basis and it's usually highly compressed in a non-editing format such as MPEG-2 or similar. NLEs are made to work with video cameras, not still cameras which is why you're having trouble.
That's not to say you can't edit video captured with a digital camera, but you need to know how to prep it for editing. Some digital cameras shoot at odd frame rates and they all use some form of compression that is not typically used in editing. This means that you'll likely need to convert your clips to an editable format first using Compressor.
Andy

Working with Multiple Files in Workspace Layout

Similar Messages

Maybe you are looking for