Working with multiple spool work process

We have around 2500 spool request generated every day on an average.we had only 1 spool work process,last week we increased it by 1 and now 2 spool work process there in the system
But we are not getting any help from second spool work process as all spool request are handled by any one at a time and other w/p is in waiting mode.
Is there any way to make both work process work together within sap policy of "Printu2013inu2013orderu2013ofu2013generation"
I created new output device hoping that spool request created for this will go to other but no help
Regards
Shahnas.S

Hi ,
I think we can't manage the spool work process(infact any work process) ,It is SAP internal Mechanisam
Please have a look on
Note 108799 - How many spool work processes for each instance
Regards,
Srini Chapa.

Similar Messages

Working with Multiple Files in Workspace Layout

If I was working with multiple files in the workspace layout, they each used to be available for selection from a tab. Now I can either cascade the files horizontally or vertically - but not have them appear in a tab across the top of the workspace layout.
Does anyone know how to set the workspace to present multiple files in tabs? I have CS3.

Tanya,
This may not help, but the times when that happens to me is when I go too fast and some operations haven't finished. I then try to select a file that hasn't completed and the file I select is in the process of having the data updated. The worst is when it is trying to render as I am doing something.
I hope this helps some.
Mel

Working with multiple layers in CS 3 ?

In order to work with multiple layers in cs3, I first need to open few images to work with,and when I open few images it only shows last image that I opened.Frist images can't be seen in workspace, and when I open new document I can't see not even one photo I opened?

try tapping the F key a few times until you get to the screen mode that allows you to see all image windows.

Does WRT54GP2 work with multiple ViOP providers ?

My question is, Does WRT54GP2 router work with multiple ViOP providers ? Can I use it with a ViOP provider other then Vonage ?
Thanks, John

Yes you definately can , all you need is a VOIP adapter that supports SIP . It's a standard protocol and is supported by all routers and VOIP providers

Reg:working with multiple windows in webdynpro-abap

Hi ,
How can we create multiple windows and how can we link them...
suppose we have 3 fields on first screen .how to move the data from the first screen to second screen..
Thanks & Regards
Suman Puthadi

Hi
As per your Subject you are looking for "working with multiple windows in webdynpro-abap" and for abap there is a different forum. Web Dynpro ABAP
Hope its clear to you...
Even you can read this post when ever you get time Read before posting
Regards
Ayyapparaj

Problem when working with multiple sequences

Dears,
In order to make life easier (I am currently working on a rather long project), I work with multiple sequences, one per chapter.
My problem: I named one sequence "assembly sequences" in order to add the various sequences. I dropped the sequence no 1, then no 2. All works fine, beside that when playing the sequence no 2, I see two black lines on top and bottom of the screen for the all length of the sequence. Which is not the case when I click on the sequence itself and play it independently.
Any idea how to solve this ?
Thanks
Nic

Thanks, what happened is that :
1st sequence is like this : Frame size 720x576 pixels, video rate 25fps, Compressor DV-Pal. And I think it is the one appropriate for me and my country.
2nd sequence is like this : Frame size 720x480 pixels,
video rate 29.97 fps, Compressor DV-DVPRO-NTSC.
I think I should change the second sequence setting, but can I do it after all the work I have done, and continue making a 3rd, 4th and so on ?
Tx for your precious help,
Nicolas

Why is scrolling not working with multiple youtube embeds layed out vertically in a stack on one page?

Why is scrolling not working with multiple youtube embeds layed out in a stack on one page?

Hi ,
This is a sort of performance issue , because your program takes more than the max time set for the program to execute in foreground.
There are many stuff in program which will hamper your performance.
I will list down a few
1. SELECT *
FROM konp
INTO CORRESPONDING FIELDS OF TABLE konp_itab
FOR ALL ENTRIES IN a363_itab
WHERE knumh EQ a363_itab-knumh
in this statement you are using for all entries a363_itab , but before this statement you are not checking if the table has any entry or not , please do remember that for all entries has this characterstic , that if you internal table does not contain any record , then all the records are selected from the database table. So in this case if you table a363_itab is empty , so what you want is no data must be seelcted from table konp , but what will happen is all the records in KONP will be seelcted.
2. While retreiving data you are using seelct * even though you do not require all the fields , an example is
<b>SELECT *
FROM mkpf
INTO CORRESPONDING FIELDS OF TABLE mkpf_itab
FOR ALL ENTRIES IN mseg_itab
WHERE mblnr EQ mseg_itab-mblnr.</b>
in this your internal table contains only 2 fields
<b>mblnr LIKE mkpf-mblnr, "Number of Material Document
bldat LIKE mkpf-bldat, "Document Date in Document</b> , but to get these 2 fields you are selecting all the fields of the table.
3. In select you are using into corresponding fields of table , it is not a good practice., so please avoidd it.
Please understand that you must try to reduce the access to your database tables and try to keep it minimal , because this same thing may happen becasue data in DEV is very less compared to the volume of data in production , so a program working in DEV will take much more time in PRD if not written properly and may result in timeouts , as in your case.
Please try to make chanegs to the prorgam and see if it works.
In case you have more queries , please do revert back.
Regards
Arun
*Reward points if replay is helpful

Maintain performance while working with multiple shape layers (~50 )

Hey guys, I've been working on some projects lately where I need to animate a lot of shape layers cascading, arraying, with various animation properties. When I get to the point of using 30-60 or so shape layers, and they're all doing some kind of scale, position, etc. animations, my computer slows to a complete crawl. This then forces me into using a single shape layer and the repeater functions. These can work well sometimes, and don't hamstring the flexibility too much, UNTIL you need to incorporate varying colors. At that point, I usually switch my shape layers to masks and place a layer below with varying colors as needed. The shape animations then reveal those colors, but this doesn't work for a complex object that in itself requires many colors. Sooo...
What kind of workflows do you all have for working with multiple semi-complex objects at once? I figure I must be missing something, because this has gotten really limiting. Is everyone just working with 256GB of RAM?
FYI, my computer specs are:
2 x 2.66 GHz 6-Core Intel Xeon
32 GB 1333 MHz DDR3 ECC
ATI Radeon HD 5870 1024 MB
OS X 10.9.4 (13E28)
Thanks!!

Pre-comping can speed up your previews if you are using disk cache, but nothing will speed up your first ram preview or a ram preview after a keyframe change except a better optimized system. All it takes to slow things down is one effect or a footage file that causes AE to start consuming memory and processor power.
As a test I just created a gradient filled rectangle, added rotation keyframes, duplicated the layer so I have 64 copies on my Mac Mini and tried a ram preview compared with the same comp with only 1 layer. Almost no difference in the time it took to preview 10 seconds. Threw in a scale transform for all layers and again, not much difference between one shape layer and 64. To make things much harder I change the rectangle to a Polystar and animated everything in the Polystart transform properties, set up a composition with 128 duplicates and a comp with one layer. 2.5 seconds for a ram preview at quarter rez for a single layer, 10 seconds for a ram preview for 128 layers. That's more than acceptable to me for a two year old Mac Mini with 16 gb of ram. Increasing the zoom factor to 50% with Resolution set to Auto doubled the ram preview time which was still acceptable.
This makes me wonder what else is going on in your composition. Any effects or other things going on? Have you optimized your system for maximum performance? There are links with suggestions for doing that all over this site as well as the Adobe recommendations found here: Optimizing After Effects Performance

When working with multiple artboards, are there separate layers panels for each artboard?

Just started working with multiple artboards in ai but have read nothing about the layers panel, whether you use one layers panel for all the artboards or if the layers panel is duplicated so there is one for each artboard.

I don't really understand your problem, but I've had headaches with managing a GUI before (as many programmers have, I'm sure).
My best advice, if the scheme your using to build and manage a GUI is too confusing for you, the programmer, to easily understand/manage, change the scheme. Even if this means recoding a good deal of your program (though, hopefully, you've kept the GUI as seperate from your functional code as possible) it should be worth it.
Perhaps a clearer explination of your problem would help better illustrate your problem?
-Rejun

How do icloud and itunes match work with multiple libraries?

How do icloud and itunes match work with multiple libraries?

This forum is for troubleshooting compatibility issues between Macs and Windows, not iTunes. You'll probably want to repost your question in the iTunes discussions:
http://discussions.apple.com/category.jspa?categoryID=150

Airplay not working with ipad3 but works with ipod touch 3rd gen works

Just recieved my apple tv 3rd gen (refirbushed) got it connected to my wifi and check out a few things and was working just fine. Then I tried to use the airplay function on my ipad 3 and it started to connect then the circle spins and error message appears. After which it messes up the wifi and nothing can connect to it, not ATV, not ipad, not touch, or other 2 laptops until it is reset. Did this a couple of times same result. Finally tried different tv farther away from router, same result. Lastly I tried touch, airplay worked with multiple apps. Retried the ipad, everything broke same as before. Please Help.
Last iOS on all.
D-Link DIR-635 - nWireless capable
MAC Address filtering on.
Home Sharing on.

Turn off the address filtering, and see what happens...
Using AirPlay
http://support.apple.com/kb/HT4437
Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS4215

How does Creative Cloud for teams work with staff who work in two locations ie in the office/home

How does Creative Cloud from teams work with staff who work in two locations i.e. in the office and home?

There is no difference please be aware that each login is provided with two activations however. If you wish to have a computer at both work and home activated though that is perfectly fine as long as your employer is ok with using company software at home.

The "new" hotmail no longer works with safari, but works with firefox. Hmm.

The "new" hotmail no longer works with safari, but works with firefox. Hmm. i find this very convenient being a microsoft product. anybody else wonder why this new version happens to not be safari compatible? does anybody know if it works on the PC version of safari? if not, i find this to be a blatant move on microsofts part to bias the safari browser (especially since its basicly new on the window platform). forcing safari/hotmail users to "have" to use another browser to access their hotmail accounts.

I have been successfully using Hotmail and Gmail with Safari for a long time. For roughly the past month, that relationship is rocky at best. At times, one of the following actions suddenly opens Hotmail, but it is a short-lived solution:
(a) Hotmail directly
(b) Hotmail Home>Hotmail
(c) Sign up to Windows Hotmail
(d) Deletion of prescribed cookies, resetting, etc. - made no difference
Both Firefox and Opera work fine with Hotmail - especially Opera is very fast.
In addition, Safari and Gmail does not work with Attachments, but otherwise Gmail is OK.
I suspect I have to wait for a Safari fix because in my case I do not wish to abandon Hotmail, and Safari is a given. I would think that Safari would want to stay competitive with the two biggies, Hotmail and Gmail, which must have large numbers of users.
I certainly would appreciate any other suggested fixes.

Elements 10 canvas not working with tiff images; works fine with jpegs. What to do?

Elements 10 canvas not working with tiff images; works fine with jpegs. What to do? It does not allow me to add a colored canvas, only a blank canvas.

Perhaps some of the tiffs are already layers.
In other words, since jpegs don't support layers, they all ways open with one locked background layer, but the tiff format does
support layers so the tiffs don't have to have a locked background layer and can already be a regular layer that supports transparency.
For the tiffs you could add a new color fill layer below and use the color you want the enlarged canvas to be.
On pse 10 look at the bottom of the layers panel for the new adjustment of fill layer icon

My new I phone 4s does not ring when someone calls. Speakers works with music, it works with headphones, it works with the ringtones in the setting mode but it does not ring when is in normal mode...Please HELP!!!!

Speakers works with music, it works with headphones, it works with the ringtones in the setting mode but it does not ring when is in normal mode...Please HELP!!!!

Try a different ringtone.
Reset or restart the device.

Working with multiple spool work process

Similar Messages

Maybe you are looking for