Working with parallel port

Hello
I am intersted in working with the parallel port (LPT1 if I understand correctly) - I want to be able to generate an electric stimulus in the LPT port from the vi: what is the way to do it???
should I use the Out Port.vi to do so???
Lava

Is this option ok also??
Attachments:
Interface_OutPort.vi ‏13 KB

Similar Messages

I have an imac bought late 2013, can i use it as a display for the new mac pro? I also want to use windows 8 on it, would this work with parallels or bootcamp?

I have an imac bought late 2013, can i use it as a display for the new mac pro? I also want to use windows 8 on it, would this work with parallels or bootcamp?

Yes, it supports target display mode. Windows can be run with either Parallels or Boot Camp.

ESR,ID working with 8000 port but not with 50000

Hi experts,
I am working with PI 7.1. I am working with SOAP to ABAP SERVER Proxy scenario. I have downloaded the WSDL from ID and using XMLSPY sent a SOAP request to PI server and I got an error in SXMB_MONI under the Call Adapter step saying CLIENT_RECEIVE_FAILED.
We cross checked the services in SMICM transaction, and we missed the HTTP port 8000 for the parameter icm/servr/port_xx.
Then basis team changed the port 8000 in SMICM for the same parameter and restarted the Java stack.we checked the icm/HTTP/j2ee parameter which is having 50000 port.
Now ESR,ID,SLD,RWB... etc are working with ABAP port 8000 but not with 50000 java port and also I am getting an error in SXI_ CACHE while doing my delta refresh if_http_client receive http_communication_failure : http_communication_failure:ICM_HTTP_CONNECTION_FAILED. Kindly suggest me to resolve this error.
Naveen

Hi,
Re: Architecture of PI 7.1
NW PI 7.1 - ICM is not binding to port 5$$00
from the above two threads it is very clear that from PI 7.1 both the ABAP and J2EE ports are same.
Now we maintained both the ICM and j2ee port as 50000. Now ESR,ID,SLD are working with port 50000.
But in my SOAP to Proxy scenario I am getting the same error. When I try to send request to XI server using Altova xmlspy I am getting following error in SXMB_MONI under Call Adapter
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>400</SAP:P1>
<SAP:P2>ICM_HTTP_CONNECTION_FAILED</SAP:P2>
When i click that HTML error It shows
404 Resource not found
I am getting the following error in CC monitoring .
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessagingException: XIServer:CLIENT_RECEIVE_FAILED
My reciever communication channel is in green status CC monitoring.
I tested my server proxy in my end system which is successfully fetching data.
I am using the following URL format for generating the WSDL from Integration directory.
http://host:port /XISOAPAdapter/MessageServlet?channel=p:s:c
Do we need to maintain the Fully qualified host name in the above URL?
I tried with a test scenario which is an asynchronous communication with the above mentioned URL format. I got a success message in SXMB_MONI.
Since I am using PI 7.1 I tried the following URL also but i this case,the XML spy itself throws error. I couldnt see any messages in SXMB_MONI.
http://host:port/XISOAPAdapter/MessageServlet?senderParty=&sender
Service=FS&interface=IF&receiverParty=&receiverService=TS&interfa
ceNamespace=IFNamespace
I have seen many threads in SDN for this same error but I didn't get an answer for my scenario.
Lakshman and Manjusha
Thanks for the quick responses.
Regards
Naveen
Edited by: naveen perumal on Jul 24, 2009 8:00 PM

I have Win 7 saved (installation file) in My MacBook Pro Licence version. How can i install it on MacBook Pro. After installation how can i make it to work with Parallel desktop or VMware fusion software.

I have Win 7 saved (installation file) in My MacBook Pro Licence version. How can i install it on MacBook Pro. After installation how can i make it to work with Parallel desktop or VMware fusion software. I can buy these softwares.

http://www.simplehelp.net/2009/02/02/how-to-install-windows-7-in-os-x-using-para llels-desktop-a-complete-walkthrough/
http://blogs.parallels.com/consumertech/2011/10/24/install-windows-right-from-wi thin-parallels-desktop-7-guest.html

I have a surfboard sbg6580 modem would it work with air port extreme

do you guys help me with this Question i have

i have a surfboard sbg6580 modem would it work with air port extreme
Yes.

Get Windows Mobile 5 device working with Parallels USB ?

Hi,
I have installed windows XP with parallels and I plugged my phone into the USB port but, it detects with the operating system but active sync cannot connet to it.
Has anyone got it working ?
I have a HTC wizard.
Thanks

Thank you for the tip. I found the fix on this page: http://forums.parallels.com/thread2743.html
It should work to get any WM5 device working.
Hope this helps lots of you.

Comms with parallel port

Hi
I am trying to send a command to a printer via the parallel port, but am having no joy. I have set the BIOS printer port setting to 'Bidirectional', and created a small test program as attached.
I need to send an <ESC>A, 10 (hex), <ESC>Z in order to stop the printer during a print run, and an <ESC>A, 11 (hex), <ESC>Z to restart the printer. I have used the functions found in the example, but maybe I'm misunderstanding the functionality of the functions?
Attachments:
Test LPT1 commands for prn stop-start.vi ‏68 KB

Hi Alan,
I was working on a windows 2000 sending a signal to the parallel port using a Out Port.VI and it worked fine because the format of the computer was a 378 like you have in your program; however, when i tried to use this program in a windows vista, this didnt work because the format of the parallel port of this computer was BD00-BD07, which is not written in 16 bit like your program. In order to solve this problem, i used VISA Write and it would automatically send the signal to the parallel port. Try using VISA and you shouldnt have any problems. I will send you an example VI so you can see how i used it. I also modified your VI using VISA instead of using Out Port.vi. It has an error because part of the file is missing but this should get you started. If you have any questions dont hesitate to ask.
Guillermo Naranjo
Attachments:
UsingVISA.vi ‏11 KB
Modified Test LPT1 commands for prn stop-start.vi ‏19 KB

Can't get the Kodak 5100 printer to work with air port

Any one know how to get the Kodak 5100 to work from air port on this Time Capsule. I have tried all the other things I have read but this thing will not print. I run a network diagnostics and it tells me server failed. And the way I feel Apple can take the Time Capsule back, so many problems took two days to get it up and running. Did Apple make this peice of junk.

i couldn't be happier with my TC, really.
+I have tried all the other things I have read but this thing will not print+
well, what have you tried?
did you delete your printer from the printer list (- sign), and re-add it (+ sign)?
+so many problems took two days to get it up and running+
was the user error, or TC's fault? you got it working, so it doesn't sound like it was TC.

Is there a Labview Chroma6310 driver that works with serial port instead of GPIB?

The driver that I have downloaded from NI site is based on GPIB, I need to run it via serial port. I don't have GPIB board. I am pretty new in NI world. How easily can I convert the GPIB driver to serial port (ASRL)? Has anybody already done this? Any help on this is highly appreciated.
Best regards,
Farsh

I haven't looked at the driver and I'm not familiar with the instrument but the conversion should be pretty simple. If it uses VISA for the GPIB communication, the conversion is already done. VISA works with both GPIB and serial - just use the name of the serial port as the VISA reference name. This would be ASRL1 or Com1. If it's an older driver with the traditional GPIB calls, then replace every instance of GPIB Write and GPIB Read with VISA Write and VISA Read. You might also have to add some line terminator like CR/LF to every write. There are a lot of instrument drivers that are compatible with both serial and GPIB. The HP34970 is one that comes to mind. You might want to look at it to see how to do it yourself.

Problems with Parallel Port on Reboot

Hi,
I use labview to drive my stepper motor connected to the parallel port
on my Win98 machine. The motor takes a step for every clock pulse sent
out on a particular pin on the port.
Although my problem is not directly related to labview, I was hoping to
get a solution. Every time I reboot my computer (at least once a day,
it seems) the computer sends a series of clock pulses to the port,
moving my motor several hundred steps. I cannot tell if it's a regular
series of pulses or just random noise.
Is there a way to disable the lpt port or otherwise prevent spurious
noise being sent out to my motor when rebooting my machine? Or when
labview is not running?
Thanks,
Scot

Windows likes to check for plug-n-play devices when it boots up. You may want to set up a relay/interlock gating system that only allows pulses to reach the motor driver when one digital line is high and another other digital line is low.
-Jim

HP Laswe Jet printer with parallel port cable

My dear, dear printer has served me 14 years. It has a parallel port and is a HP Laser Jet 4 L printer. Where can I get the right cable to connect this printer to USB port on my Mac mini?
Thanks for your help,
Tonta

There are plenty of sources on the Internet that sell a Parallel to USB Printer Adapter Cable. Take a look here.
http://www.emtcompany.com/catagories/usb-to-parallel-adapters.htm?gclid=CJT21fy- xJACFQdEFQodLDBAWg
David

How do I configure Time Capsule to work with 8 port unmanaged switch?

This is what I want to end up with.
cable modem
Time Capsule
wireless network 8 port unmanaged switch TRENDnet TEGS80G
entertainment center(TV, xbox 360, dvd, apple tv, ect...)
I have been using the above setup with an E3000 router in place of the time capsule without any problems, and was expecting to just be able to switch out the E3000 for the time capsule and keep right on rolling. At the moment, without the switch plugged in, using the time capsule as a stand alone wireless router, everything works as intended. However, I don't want to have every device in the house pulling off of wireless. Whenever I plug my switch in I lose internet connectivity. I assume this is because both the switch and the Time Capsule are trying to direct traffic and creating a conflict. I have attempted to disable the NAT in the Airport Utility and this is what happens.
Where do I go from here, or am I heading in completely the wrong direction?

Unfortunately, you are on the wrong track, heading in the wrong direction at the moment.
We need to learn whether you have a simple modem or a modem/router.
This will determine whether the Time Capsule is to be configured in router mode to provide DHCP and NAT services for the network......or if your "modem" is already doing this.....the Time Capsule needs to be configured in Bridge Mode.
So, I suggest that you disconnect the switch from the Time Capsule for now, and power everything off except the modem, Time Capsule and the computer you are using to configure the Time Capsule, and get things working correctly first. Then, devices can be added one at a time to verify proper operation.
If this seems to make sense to you, and you want to move forward, please post back with the make and model number of your cable modem.

Internet not working on Mac side, but works with Parallel Desktop

I recently uninstalled Parallel desktop and noticed my internet on my mac stopped working, the diag said internet and server failed with red lights
I then reinstalled Parallel, and the internet works, but only with windows
I have a macbook pro '13 10.6.8
Any suggestions?? This is driving my crazy !!
Thanx

Yeah... good post & kinda unApplelike in it's obscurity!

Firewire 400 camera doesn't work with 800 port on iMac

I have a firewire 400 camera that i'm using for a project and one firewire 800 slot on my iMac (Late 2009).
When I plug the camera in, nothing responds no matter what I do - tried resetting the PRAM and SMC.
Compare this to my older iMac (Late 2007) which has both firewire 800 and 400 ports. I plug it in and it pops up using the underlying Quicktime controller api on either the 800 or 400 port no problem.
So I figured after trying to install a firewire camera library (libdc1394) which I need for my project which didn't work, that it must be a hardware issue, so I took it to the Apple store. The genius at the store booted the OS (Lion) from a firewire drive via 400 to 800 cable (no external power to the f/w drive was used) and then using the spare 400 slot on the hard drive, he plugged (daisy chaining) in my camera and it loaded!
So this suggested 2 things - my OS is corrupt or my card can't read straight from my device but why a hard drive in between would change this is beyond me.
I came home and installed OS X on to an external USB hard drive and loaded up from it - so this is a fresh version of Lion, there should be no software issues.
Plug the camera in to the I/O board of the iMac but load the OS from the external USB hard drive - nothing happens, the profiler doesn't detect anything at all.
On a side note, I installed XP and Ubuntu Linux and they also can't detect it, which further suggests its the device or I/O board when interfacing directly with this camera. I've tried providing the devices with external power, daisy chaining 2 cameras, using a usb hub....nothing works.
Just for good measure, I tried to boot Lion off the external USB on my older iMac and again, it worked no problem, which to me really narrows it down to the hardware.
Can anyone work out this mystery? Driving me nuts!
I feel like perhaps the port is a bit dodgy and when the genius daisy chained it, it worked better, but no idea why.
Someone said I should get a firewire 400 to usb adaptor - I actually can't find any...do they even exist?

Maybe something in Apple's quick assist will hlp
http://support.apple.com/kb/HT1151

S4 will not work with Aux port?

Headphone jack works on S4 but will not work connected to aux port in my car. Other devices work connected to it.

windyhill28 We want you to have a fully functioning device. Are you using the cable that came with the phone? Have you tried tried different cables?
Sheritah_vzw
Follow us on Twitter
@VZWSupport

Working with parallel port

Similar Messages

Maybe you are looking for