Working with ProRez and wide screen 16x9

So I am trying to edit HD down to SD using ProRez. FinalCut won't let me edit my sequence in real time unless I have it set to 720x480 with the Anamorphic check box clicked. The problem with this is that when I export out to quicktime and open it anywhere the video is now squished because quicktime is not recognizing that it's a wide screen file.
If I make my sequence 853x480 it will export just fine but FCP makes me render every clip to have it play in the time line. Anyone else having an experience like this?
I would love to be able to either edit with Square pixels at 853x480 or just have the widescreen work in 720.

http://discussions.apple.com/message.jspa?messageID=9464915#9464915

Similar Messages

  • Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click w

    Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
    Thanks.

    Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
    Thanks.

  • Hi friends, I'm having troubles with my Ipad 2. I was working with it and suddenly the screen distorted. Now it is not possible to get it back to work properly. In fact, the screen is now black and nothing I have done makes the Ipad works again. Thanks

    Hi friends, I'm having troubles with my Ipad 2. I was working with it and suddenly the screen distorted. Now it is not possible to get it back to work properly. In fact, the screen is now black and nothing I have done makes the Ipad works again. Please Help. Thanks in advance.

    I think you should make an Genius Appointment.
    Genius Appointment
    http://www.apple.com/retail/geniusbar/

  • How to declare and work with select-option in screen painter?

    hello there,
    can anybody plz suggest me ,how to declare and work with select-option in screen painter?
    neon

    Hi Blue,
    Please check these threads which will help you a lot..
    module pool programming " to add selection-option on screen"
    Re: Select option in Dialog program screen
    Re: SELECT-OPTIONS in Screen
    Good luck
    Narin

  • Best way to work with interlaced and progressive clips in the same timeline

    I´m shooting with Sony MC-50E camera in 1920x1080, 50i. When importing with Log & Transfer I can work with ProRes 422 files in interlaced mode. I have to mix the footage with video screencapture which is progressive (ProRes 422). The final videos are for web only so it should end up as progressive H264 videos. I´m getting good result if exporting to H264, 1024x576 with deinterlacing enabled, but exporting to full HD gives typical interlaced lines in the picture. How can I avoid this and what is the best solution for working with both interlaced and progressive clips?

    Deinterlace in Compressor using Frame Controls, Best settings. You can reconnect the deinterlaced files to your project, if you've already edited, but you may need to copy and paste the clips in your sequence to a new 25p timeline, then Remove Attributes, Basic Motion.
    When you're ready to export your sequence, use Quicktime Movie, Current Settings, Self-contained. Take that file to Compressor to transcode back to h.264.
    The Apple T.V. preset is very good.

  • PC Webcam works with iChat and iSight

    Before I purchase a web cam for my PC I need to know if it will work with iChat and iSight. Will I need to install any third party software for my mac or PC?

    Hi Gene,
    You will need to make a choice between AIM and Trillian
    The AIM app is free but does not Audio only Chat to iChat users and has a very small pic.
    Trillian costs $25 for the Pro version to Video chat but has a Bigger pic and can do full screen. The Basic version can alos Audio only chat to iChat users. Trillian can also join other IM services.
    More info on setting up AIM on the PC http://www.ralphjohnsuk.dsl.pipex.com/page12.html and the XP Service Pack 2 firewall. The Firewall will need to have Trillain enabled though it as well if you use that.
    Ralph

  • Am I allowed to video-capture my work with LR4 and then publish it?

    Hi,
    I could not find any relieable information on this, so I'm asking it here.
    I want to capture my screen while working with LR4 and later dub it with  my voice to produce video-tutorials. I want these tutorials to be published on my Blog and YouTube or Vimeo. I know that a lot of people do this but I'm not shure if I am allowed to do this. What makes me so uncertain about this is that with Games you normally are not allowed to do this without permission because of copyright-claims of the content shown.
    Any help is appreciated and thanks in advance

    Moving this discussion to the Adobe Acrobat.com Services forum.

  • Site list update not working with TED and Zenworks for Servers

    Product: Zenworks for Desktops 7Sp1 and Zenworks For Server/TED 7Sp1HP5
    Subject: Site list update not working with TED and Zenworks for Servers ,
    all on Linux
    Description: We have an exiting environment with 6 ZfS Servers and now we
    brought up a new Server for another location. I configured all same as on
    the other Server and the new one created all NAL-Apps at the new location.
    But in the Application Site list on the golden App is this Application
    missing. So I clicked on the Link up site list on the Distribution Screen
    in C1. On ApplicationSite list the App from the new location is missing.
    So I removed all and added the new from the new location and now i see all
    in the application site list.When I install an app on the client on the
    new location NAL is connecting alway th the same (wrong location-server
    and i get an msi error 1612 or id=53272 with path=\Wrong serverpath to
    file.
    I looked on the other tab on C1 at the golden app an I see the backlinks
    are going to all other servers without the new one. Software installation
    on other locations are ok
    Regards

    Andreas,
    I forgot to mention that you can also set the loging level on the Distributor and the Subscriber to 6. to do this at the Zenworks Server Management prompt type "setconsolelevel 6" if you want to capture this to the log file ted.log then use "setfilelevel 6"
    Next delete the Distribution from the Subscriber and then re-push the channel.
    What we are looking for here in the log is the creation of the object and the linking information about the gold object. it should look like this (not the failure part ;-))) )
    In this excerpt you will see the entry
    Golden App =
    This should be were the link is to
    You can check this both ways in the Golden App and in the Distributed Application.
    Here is a log from me that shows this info as an example of what you should be looking for.
    2008.05.29 03:35:41 [TED:Work Order In(yourserver.yes.com)] Receiving distribution: Creating new application failed,
    Subscriber Tree Name= YOUR-TREE,
    Subscriber DN = SUBSCRIBER_YOURSERVER.BRN.FL.SUBS.SUBSCRIBERS.ZSM. GRS.CBH,
    Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
    Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
    error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..
    2008.05.29 03:35:41 [TED:Event Processing] Handle Event: Work order IN completed... Creating new application failed,
    Subscriber Tree Name= YOUR-TREE,
    Subscriber DN = SUBSCRIBER_HAVERHI-FLBRN1.BRN.FL.SUBS.SUBSCRIBERS.ZSM.GRS.CBH,
    Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
    Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
    error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..
    2008.05.29 03:35:41 [TED:Event Processing] Received (from haverhi-flbrn1.yesbank.com) Creating new application failed,
    Subscriber Tree Name= YOUR-TREE,
    Subscriber DN = SUBSCRIBER_HAVERHI-FLBRN1.BRN.FL.SUBS.SUBSCRIBERS.ZSM.GRS.CBH,
    Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
    Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
    error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..

  • Working with placeholders and templates in 10gR4

    I am new to 10gR4 features. Can someone help me in working with placeholders and templates in 10gR4. Is there a document available on that?
    This is what is did. I created a primary page which contains a contribution region for list of articles(dynamic list fragment). Next, I created a secondary page (hcsp file) which is designed to create/update new artcicles. I also added a placeholder before the contribution region for this article by name ArticleDetail.
    I was able to add new articles and work with them as usual like in 10gR3.
    But when I tried to access the contents of a particular article using wcm_place_holder service I am not able to see any contents.
    This is the url for the request
    http://hd-pratapm/ucm/idcplg?IdcService=WCM_PLACEHOLDER&siteId=TestSite&dataFileDocName=TESTCONTENTFILE&templateDocName=ArticleDetail
    where the TESTCONTENTFILE is the content id of the article data file and ArticleDetail is the name of the placeholder placed above article contribution region.
    I tried changing the value of templateDocName to content id of the article (TESTCONTENTFILE) and also tried the content id of eondary page file for article, but the same result. I am not able to see anything on the screen.
    Also tried the same with above values with placeholderDefinitionDocName instead of templateDocName parameter but no good.
    Anything wrong I am doing here?
    Regards,
    Pratap

    I tried something different and I am getting the response but the content is not html.
    This is what I tried
    http://hd-pratapm/ucm/idcplg?IdcService=WCM_PLACEHOLDER&dataFileDocName=TESTARTICLE&templateDocName=TESTARTICLE
    and I got the response which is xml data. I think it is the contributed data file for TESTARTICLE.
    What we are looking for is the html text for presenting the article directly on external sites. The documentation for WCM_PLACEHOLDER says that it should get html directly. I am not able to get it.
    This is the snippet of code of articleDetails.hcsp secondary page
    ================================================================================================
    <!--SS_BEGIN_SNIPPET(fragment1,2)--><!--$ssFragmentInstanceId="fragment1", ssIncludeXml("SS_FRAGMENTS_PLAIN", "fragments/fragment[@id='NavMultiHorizontal']/snippets/snippet[@id='2']/text()")--><!--SS_END_SNIPPET(fragment1,2)-->
    </p>
    <p> </p>
    <p><!--$wcmPlaceholder("QtelArticleDetail")--></p>
    <p>
    <!--SS_BEGIN_OPENREGIONMARKER(region1)--><!--$SS_REGIONID="region1"--><!--$include ss_open_region_definition --><!--SS_END_OPENREGIONMARKER(region1)-->
      <!--SS_BEGIN_ELEMENT(region1_element6)--><!--$ssIncludeXml(SS_DATAFILE,region1_element6 & "/node()")--><!--SS_END_ELEMENT(region1_element6)-->  </p>
    <p><!--SS_BEGIN_ELEMENT(region1_element2)--><!--$ssIncludeXml(SS_DATAFILE,region1_element2 & "/node()")--><!--SS_END_ELEMENT(region1_element2)--> </p>
    <p><!--SS_BEGIN_ELEMENT(region1_element3)--><!--$ssIncludeXml(SS_DATAFILE,region1_element3 & "/node()")--><!--SS_END_ELEMENT(region1_element3)--></p>
    <p><!--SS_BEGIN_ELEMENT(region1_element4)--><!--$ssIncludeXml(SS_DATAFILE,region1_element4 & "/node()")--><!--SS_END_ELEMENT(region1_element4)--></p>
    <p><!--SS_BEGIN_ELEMENT(region1_element5)--><!--$ssIncludeXml(SS_DATAFILE,region1_element5 & "/node()")--><!--SS_END_ELEMENT(region1_element5)-->
    <!--SS_BEGIN_CLOSEREGIONMARKER(region1)--><!--$include ss_close_region_definition --><!--SS_END_CLOSEREGIONMARKER(region1)-->
    ================================================================================================
    Can you please suggest what else needs to be done in order to get html repsonse from WCM_PLACEHOLDER service.
    Regards,
    Pratap

  • NB200 Windows 7 Fn key not working with ESC and F1 to F8 keys

    I recently bought a Toshiba NB200-136 and everything worked fine.
    Flash cards on top/bottom of the screen work with Space, ESC and F1 to F8 keys, the rest of function buttons work without showing the cards. Lately the cards stopped showing and I cannot use the Fn + Space, ESC, F1-F8 keys (there's just no reaction), though the rest of buttons work with Fn and the LED is always lit when the Fn is pressed.
    I reset Flash Cards, checked and changed their settings few times and they work only if I choose 'Allow the mouse to bring up the cards' option. Even then they don't appear when I press Fn and the functions work only when I click one of the cards.
    The problem appeared after (though I'm not sure if immediately) such situation:
    I clicked Start -> Shut down and closed the lid. When I opened it the next morning I saw an empty list of programs that wouldn't shut down (it happens quite often, but it's off top). I clicked 'Cancel' or 'Force shut down' but it didn't work so I pressed the Power Button for 5 secs to turn the computer off. I noticed the Fn problem after turning it on and it didn't disappear after resets.
    I think the problem appeared before but disappeared after reset so I ignored it.
    I'll be thankful for your help.

    Any time that you force Windows to stop instead of letting it shut down normally (sometimes you have to shut it off), you may have lost clusters of data that interfere with the proper operation of Windows. So I suggest you start up and run scandisk and make sure you check the box for fixing problems. The other box doesn't need to be checked unless you suspect bad sectors on the hard drive and it takes a long time so I recommend only checking the one box for finding and fixing errors.
    Let us know if this worked and the problem is fixed.
    Good luck.

  • How to work with DTR  and CBS?

    Hi
    I have designed one web dynpro application. Now I want to work on this application through DTR. Means i want to do versioning and all. How to work with DTR..? I have gone through lot of blogs and help available in SDN but i am unable to understand how to work with it.
    One more thing how to work with CBS. How to configure CBS. I have NWDS latest version 7.0.7. In window perspective i am unable to find JDI. can any one please explain me if u have worked on this with example
    If possible can any one send me the screen shots how to work with these ?
    Best Regards
    Ravi Shankar B

    Hi Ravi
    For you to work with DTR and CBS, firstly u will have to configure JDI on server.
    To configure the NWDI, please go through the links given below:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/07/f6bc3d42f46c33e10000000a11405a/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/71/0369404c65587ee10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/43/26b84d6c823f66e10000000a11466f/frameset.htm
    In Nutshell, following steps will be performed:
    1) logon to Portal Devinf.
    2) click on CMS
    3) Go to landscape configurator
    4) create domain
    5) create tracks and add Software components in that track
    6) runtime systems ( dev/qa etc are configured
    7) in the transport studio, all the files listed are checked in through check - in tab.
    8) they move to developement tab.
    Once all these things are done, in your NWDS:
    1) Setting the devbox host name and server port in Window -> Preferences -> SAP
    J2EE Engine
    2) Setting Portal URL in Window -> Preferences -> JDI -> DC Pool and ping server,
    to check whether server is getting accessed from NWDS.
    3) Once server is set, login to DTR and go to DTR perspective. Create a client there, by doing a right click and filling up the required details.
    4) In the DC perspective, in the Local DCs view, perform import configuration.
    5) the dev track is not configured
    6) Under this, after logging into DTR, now you can create your project, check them in and create new versions.
    Thanks & regards,
    Anupreet

  • Working with NTSC and PAL

    Hey,
    So I'm editing a live concert and the director wanted to work with iPhones and DSLRs so I asked them to all film in 30fps (as iPhones only do NTSC at 30fps) but they forgot and now I have to edit with 25fps (PAL) and 30fps. I've multi-camed the four 25 files (so the project is in and got a decent cut but now I'm trying to sync the two 30 files to the project. I've thrown them in the timeline and applied Rate Conform but it's reading the 30 files as 24s so it's applying a "24 to 25" conversion instead of a "30 to 25" conversion resulting in it being even worse out of sync...
    How do I manually tell Rate Conform that the files that I want to conform to 25 are 30 not 24?
    Also, is there any chance I can add the two 30 files to the multicam to make it easier to cut? Can I just add them or will I have to start the multicam file over again?
    Cheers!

    … I guess, I'm a bit lost in translation ....
    1) adding 25fps material to a 30fps timeline AND 'conform speed' will speed-up this clips, NOT make'em synch! to add 'any' fps to a project, FCPX will care, to keep a second = a second - independently of fps. Or, in other words: clips are synch automatically. 'conform speed' is e.g. to create slowmo by conforming  60fps reecording to a 24fps timeline ......
    2) what makes you believe iPhone is 30fps? iOS devices offer a 'variable' fps, under low light conditions, the fps can drop down to 18fps, 15fps .... worse: vary within a clip, weird stuff like 21.67fps! I'm not surprised, FCPX identifies iPhone recordings as 24fps - most probably they ARE 24
    3) before import to FCPX, I would 'convert' iPhone recordings with Mpeg Streamclip to a 'steady' clic; open recordings, repair timecode, export as prores/30fps
    (and, just to mention: frame-rate ≠ NTSC/PAL ; and iPhone can not record in NTSC nor in PAL ......)

  • FaceTime no longer working with Yosemite and IOS 8.1

    I have used FaceTime flawlessly for some time with no issue.
    After I upgraded to Yosemite on my MacBookAir and IOS8.1 on 5S and iPad air, I've had a problem connecting.
    When I get a call, all the devices ring (as they should) but it will not connect on the first device I pick up on.  It says connecting
    but all the other devices keep ringing and finally it says I have a missed call.  The connection does not happen.  If I turn off
    all devices except one, it will work...... do we have a bug here??

    Thank you for responding to my issue.  I spent the better part of two hours trying to get this to work.  Bluetooth is enabled on all devices. Each computer is set in Preferences/General to allow Handoff.  All computers and iPhones are on the same WiFi network.  I toggled all of the major settings off and on.  Rebooted each of my computers several times. I finally conceded defeat.  Then my daughter asked to have a try at it.  She worked on the first MBP for about thirty minutes and informed me that she had gotten continuity to work.  And indeed, on her MBP late 2012 she is able to use the continuity features in both directions between her computer and her iPhone 6.  But it only works with Mail and Safari.  I asked how she accomplished this feat.  She said she turned off "everything" on her computer and iPhone (WiFi, Bluetooth, "Allow handoff" under Preferences/General) and then rebooted both the iPhone and the computer.  She then turned everything back on.  This worked for her.  So we tried the same thing on my MBP and iPhone 6.  Now continuity works partially. Email activity is mirrored on both the MBP and the iPhone regardless of which device initiates the continuity activity.  But Safari activity on the computer is mirrored on the iPhone but not in the opposite direction.  There is no continuity function for Pages in either direction.  The telephone connectivity works fine on all of my devices– 3 MBPs, Mac Pro, iPad Air, 2nd gen iPad and 3rd gen iPad.

  • Looking for an app that works with Mac and iPhone that will set calendar reminders of birthdays in contacts.

    Looking for an app that works with Mac and iPhone that will set calendar reminders of birthdays in contacts.

    Hi ron1098,
    Try my application Dates to iCal. it runs on the Mac, but you can sync the calendar to your iOS device.
    See more about Dates to iCal here. It is £4 shareware with a 2 week demo.
    Best wishes
    John M
    As I sell software on my site and ask for donations, the Apple Support Communities Use Agreement requires that I state that I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • Handoff not working with Yosemite and iOS 8

    I have three Macbook Pros in my household.  Two are mid 2012 models and the other a late 2012 model.  Each is supposed to support the handoff feature of Yosemite and ios8.  Everything seems to work properly between my daughter's late 2012 MBP and her iPhone 6.  But on the other two MBPs in our family the continuity feature does not work on either of them.  Receiving and sending calls works fine.  But the continuity does not work even though all three MBPs and all three iPhone 6 are on the same wifi network.
    I've tried all the suggestions that I could find.  Toggling off and on the various settings on the MBPs and the iPhones.
    John

    Thank you for responding to my issue.  I spent the better part of two hours trying to get this to work.  Bluetooth is enabled on all devices. Each computer is set in Preferences/General to allow Handoff.  All computers and iPhones are on the same WiFi network.  I toggled all of the major settings off and on.  Rebooted each of my computers several times. I finally conceded defeat.  Then my daughter asked to have a try at it.  She worked on the first MBP for about thirty minutes and informed me that she had gotten continuity to work.  And indeed, on her MBP late 2012 she is able to use the continuity features in both directions between her computer and her iPhone 6.  But it only works with Mail and Safari.  I asked how she accomplished this feat.  She said she turned off "everything" on her computer and iPhone (WiFi, Bluetooth, "Allow handoff" under Preferences/General) and then rebooted both the iPhone and the computer.  She then turned everything back on.  This worked for her.  So we tried the same thing on my MBP and iPhone 6.  Now continuity works partially. Email activity is mirrored on both the MBP and the iPhone regardless of which device initiates the continuity activity.  But Safari activity on the computer is mirrored on the iPhone but not in the opposite direction.  There is no continuity function for Pages in either direction.  The telephone connectivity works fine on all of my devices– 3 MBPs, Mac Pro, iPad Air, 2nd gen iPad and 3rd gen iPad.

Maybe you are looking for