Working with Right Click Events

I would like to configure the Event Structure to recognize not only mouse down but the differance between left mouse button down and right mouse button down. i.e. I'd like to be able to fire individual events for either left/right mouse buttons.
Does LabView 6.1 support this?
Thanks
TMC

You don't have a separate event for left or right mouse button down but for the mouse down event, you do have the button element. The left button has a value of one and the right button is two. If you put a case structure inside the mouse down event, you should be able to do what you want.

Similar Messages

  • Email Security Plug-in - Doesn't seem to work with right click or save and send

    I've searched the knowledge base but have not located the answer yet.
    We have the Encrypt Message plug-in installed to flag the email [SEND SECURE].  This works very well when in Outlook.  It does not seem to work when right clicking a file to send outside of Outlook or performing Save and Send from within Microsoft Office.  The add-in still shows and users are clicking it and the Send button but the emails are not going securely.  We are on Microsoft2010 on mostly XP machines.
    How can I get Encrypt Message to work in all instances?
    Thank you.
    Starla

    Andreas
    I am getting an error.  See below for what I'm choosing and the response.  let me know if I'm supposed to be trying to download from another area.
    Thanks
    Starla
    Email Security Plug-in - Doesn't seem to work with right click or save and send
    Cisco IronPort Email Security Appliance C370
    Release:IPAS
    Filename: CiscoEmailSecurity_7-2-0-039.exe
      Remove
    Details
    Release
    IPAS
    Filename
    CiscoEmailSecurity_7-2-0-039.exe
    Release Date
    25/Oct/2011
    Description
    Cisco IronPort Email Security Plug-in (Outlook)
    Size
    32541.84375 KB (33322848 bytes)
    Router Checksum
    0x553f
    MD5
    f0c864697d9e1a3e8f5297062943ac50
    Email Security Plug-in - Doesn't seem to work with right click or save and send
    Save the device to 'My Added Devices' list
    More Info
    'My Added Devices' list could be found by: 1. Clicking on 'My Cisco' Tab and expanding
        the 'Added Devices' section. 2. Selecting any task specific product
       selector and clicking on 'My Added
        Devices' in left pane.
    Email Security Plug-in - Doesn't seem to work with right click or save and send
    Set Cisco Notification Alert
    More Info
    All 'Cisco Notification Alerts' list could be found
    by: 1. Clicking on 'My Cisco' Tab and expanding
        the 'Support Notifications' section.
    Cisco service contract information indicates you are not authorized to download software for the following product(s):
    Cisco IronPort Email Security Appliance C170
    Cisco IronPort Email Security Appliance C370
    Cisco IronPort Email Security Appliance C650
    To download software for other product(s), remove the software for the product(s) listed above.
    Or, if you feel this message is in error, please:
    1. Email technical support for 24x7 assistance. To expedite your request, please include the following information:
             User ID (Cisco.com ID used to download software)
             Contact Name
             Company Name
             Contract Number
             Product ID
             Desired Software Release or File Name
    2. Contact your Cisco Representative, Partner or Reseller to ensure product(s) listed above are covered on a service contract. The Partner Locator link may assist in locating your nearest partner.
    3. Associate contracts for those products to your Cisco.com profile using the Instructions found in Profile Manager. After you submit your additional contracts, verification and updates may take up to 6 hours to complete.

  • MY FIREFOX NEW TAB NOT WORKING NIETHER WITH + NOR WITH RIGHT CLICKING ON TAB OR DOUBLE CLICK ON TAB

    MY FIREFOX NEW TAB NOT WORKING NIETHER WITH + NOR WITH RIGHT CLICKING ON TAB OR DOUBLE CLICKING ON TAB

    '''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that temporarily turns off hardware acceleration, resets some settings, and disables add-ons (extensions and themes).
    If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
    *In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
    *In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
    If Firefox is not running, you can start Firefox in Safe Mode as follows:
    * On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac: Hold the '''option''' key while starting Firefox.
    * On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
    ''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    When you figure out what's causing your issues, please let us know. It might help others with the same problem.

  • Right Click Event & Link To

    Hi All,
    What is the use of LinkTo Property in Item Object. What is the advantage of it
    When the Right Click Event Fires. I tried on form  but doesn't work.

    Hi Manish,
    oItem.LinkTo is used for
    1. Labels (StaticText) to get the "white line" that connects the edittext.
    2. Links/Orange Arrow (LinkedButton) to connect them with a edittext. than the Arrow knows where to take
    the value from
    the RightClick Event is in an own EventHandler ! also be sure you enabled it in your EventFilter
    lg David

  • B1DE Right Click Event

    Hi all,
    I am working with B1DE and the Right click Event doesn't fire at all?
    anybody knows why?

    Yes you are correct. This is a bug and it will be fixed
    in the next release of B1DE planned to appear on SDN this month.

  • Create a right click event...

    Hi,
    I want to create a right click event programmatically in my Swing application.
    Can anyone tell me how do I do this? I have the listener and the code that works for my required functionality, but it requires me to right click explicitly. And, I wanted to simulate a right click so that I can execute this part of the code in the listener. Is there any way to do it?
    Thanks in advance...

    I wanted to simulate a right click so that I can execute this part of the code in the listener1) Create a method that can be invoke directly by the listener and your program.
    or
    2a) Create a MouseEvent
    2b) use the dispatchEvent(...) method of the Component class to send the event to the object.

  • Right-Click Event Matrix

    Good Morning
    Experts:
    I have added several options(SAP and Custom) to the Right-Click event.  It works as designed when Right-Clicking on the Matrix.  However, when Right-Clicking anywhere else on the screen, the options are still displayed.
    How can I restrict the options to only be displayed when Right-Clicking on a Matrix?
    Thanks,
    EJD

    Hi Ed,
    The right click event is completely separate event (ie it is not an EventType within the ItemEvent).
    So to code it (C#):
    private void _sboApp_RightClickEvent(ref SAPbouiCOM.ContextMenuInfo EventInfo, out bool BubbleEvent)
         BubbleEvent = true;
         if(EventInfo.FormUID == "MYFORM")
              // Do some stuff
    You also need to have defined the event while initialising the application object:
    this._sboApp.RightClickEvent += new SAPbouiCOM._IApplicationEvents_RightClickEventEventHandler(this._sboApp_RightClickEvent);
    There's an example project in the UI section of the SDK samples (number 22).
    Kind Regards,
    Owen

  • Deactive OLAP functions with right click

    Hi guys,
    I want to deactive "OLAP functions with right click" in thw workbooks to avoid some mis-operations from users. I tried to uncheck it from BEx toolbar (under "Settings") and saved the workbook. But when I reopen the workbook, it becomes active again. Does anyone know how to deactive it forever? Thanks a lot.

    Hello,
    Go to Business Explorer Menu, Select Settings, Uncheck OLAP Function with Right Click and save it as existing workbook.
    I have tried it. It works, when you reopen, it will be still disable..
    Hope it helps.
    San.
    Message was edited by: SAN

  • Right click event of a cell

    Hi friends
    i want to write some code on event that is right click of a cell. is it possible.
    thanks

    Yes, its possible.
    Eventtype = et_RIGHT_CLICK
    BeforeAction = True
    ItemUID = matrixID
    ColUID = columnID
    then in pval.row you will have the row number, where user clicked with right click.

  • Problems with right click in hierarchical tree

    Hi,
    I create a popup menu in a hierarchical tree and want to call this referencing to a node in the tree.
    I can get the node in GET_TREE_NODE_SELECTION but the node need to be selected for this...
    How can I select a node with a right click?? and then call the popup menu??
    Am I clear??
    Why the trigger MOUSE_CLICK doesn't works for right clicks??? I know about the SYSTEM.MOUSE_BUTTON_PRESSED but to use this I need a RIGHT_CLICK_TRIGGER... that I don't know how to call...
    thanks!

    Hi,
    This is a bug(96289), the same as the Base bug 1477977 which has NOT been fixed in Release 9.0.2 (as Oracle anounced) or in any earlier releases.
    Bug 1477977 was currently scheduled for the 1st patchset of Forms 9.0.4
    I don't know if it was fixed. Contact Oracle about that.
    Right now, to achive what you want you must left click to select a node. This means that the use must do a left click and a right click to have an item selected.
    Monica

  • How to Remove "OLAP Functions with right-click" in Workbooks (By VBA?)

    Dear Experts:
    After we created workbooks, to prevent end users from using certain BEx functions, we greyed out some "icons"
    on SAP BEx Menu in the workbooks. But now we have one problems: because we also made "Setting" unable on the menu bar, now we are not able to remove one marked selection: "OLAP Functions with right-click". Is there any way we can disable "OLAP Functions with right-click", then users can only use the normal Excel functions in the workbooks??
    Thank you very much and BR
    SzuFen

    Hello,
    Go to Business Explorer Menu, Select Settings, Uncheck OLAP Function with Right Click and save it as existing workbook.
    I have tried it. It works, when you reopen, it will be still disable..
    Hope it helps.
    San.
    Message was edited by: SAN

  • Touchpad left click button works as right click

    Hello All,
    I have this laptop for few yrs now, I have tried to find out a resolution to this issue without success for really long time. I think now I am getting out of patience and need some ones help with this.
    Problem is touch pads left button would work as right click and bring up the context menu.
    I have gone into Control Panel>Mouse and played around with the settings.
    I saw a setting there where I had option to select [Right-handed] or [Left-handed] Whatever I do, it always remains as left handed and right click stays as if it is a left handed setting.
    I have updated the drive. Currently installed
    Driver Version : 17.0.19.0
    Driver Date : 17/10/2013
    Issue is this behavior is not consistent, randomly it decides to work as intended (left click would be left click and right click would popup context/properties menu) and other times it bombs miserable its extremely annoying to suffer this when I have to work on laptop for extended period of hours as it just keeps on happening. Can some one pls help?
    Thanks in advance for taking time to read this

    Hi there:
    A suggestion -
    Do a hard reset first.
    Power on laptop with AC power alone , removing battery.
    Then try reloading BIOS to default settings
    Save, exit, continue loading Windows.
    Shut down.
    Insert battery, power on with both plugged.
    Check.
    Regards
    Visruth
    ++Please click KUDOS / White thumb to say thanks
    ++Please click ACCEPT AS SOLUTION to help others, find this solution faster
    **I'm a Volunteer, I do not work for HP**

  • Disable (all) functions on the block diagram with right-click menu

    Hello to everyone,
    here is one more idea, which I'd like to propose. 
    As for me, it would be useful to have the following: when all components (functions, wires, subVIs, etc.) are selected on the block diagram (like, after ctrl+A), operator could do right-click, and in the menu would appear menu item "Disable everything". After it, all the code could be placed into Disable structure. 
    Of course, I can add Disable structure to block diagram manually, and cover whatever I want, but with right-click menu it would be much faster.
    Also, it can be modified to disable only selected items - then each of them can be placed into separate Disable structure, and, for example, additionaly in the enabled case of Disable structure, corresponding wires will be connected. Sometimes it is needed for testing - just to disable couple functions, and test subVI. Or to disable subVI fully (it's faster, then disable place, where it is called. Especially, if subVI is used in many places).
    It will not make debugging difficult, because anyway Disabled structures are used; such functionallity can just make life a little bit easier...
     

    There is always the File->New... which opens up a new window.  You can have your templates in that window by putting them somewhere (I don't remember where at the moment).
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Sony Ericsson Z550i doesn' t work with Salling Clicker

    Hi,
    I have a Sony-Ericsson Z550i, I downloaded a plug-in to make it work with iSync, but this portable phone doesn' work with Salling Clicker althougth its name is included in the Salling Clicker' s List of phones.
    Is there someone who can suggest me what should I do to make my phone work with Salling Clicker?
    Thank You in advance,
    Alberto

    Why don't you contact the author of Salling Clicker? That's the obvious place to go to for support of a product you've purchased, especially as its not an Apple product.
    http://www.salling.com/support/
    http://www.salling.com/forums/

  • Right Click Event C#

    Hi,
    Is it the right way to use the right click event to delete row in Matrix?
    Could you please give me the template method for right click event?
    Thank you,
    Rune

    private void m_Application_EventRightClick(ref SAPbouiCOM.ContextMenuInfo oContextMenuInfo, out bool BubbleEvent)
                BubbleEvent = true;
                string vm_Column_ID_string = oContextMenuInfo.ColUID;
                string vm_EventType_string = Convert.ToString(oContextMenuInfo.EventType);
                string vm_Form_ID_string = oContextMenuInfo.FormUID;
                string vm_Item_ID_string = oContextMenuInfo.ItemUID;
                Int32 vm_Row_Int32 = oContextMenuInfo.Row;

Maybe you are looking for