Working with SD and HD on same time line
Ok here is another one for anyone who can help me. I am editing a project on Final Cut Express 4 and the majority of my video is file SD stuff. I have new elements shot on HDV. My question is the "old" stuff is 4:3 and the HD video is 16:9 is there an effect I can use to make the "old" video look close to the HD video? Letterbox? Obviously I do not want to stretch the SD video.
If you edit in an HD sequence, the SD material will be scaled up greatly and look pillarboxed. If you edit in an SD sequence, the HD material will scale down and be letterboxed.
Similar Messages
-
Apex mixes applications working with two windows at the same time
Hi all, while developing in Apex I have found the following problem:
Working with two different applications at the same time, the browser goes from one to another indistinctly.
To reproduce the problem:
1. Open the same application builder in two different Firefox windows
2. Open a different application in each window (In my case: application 103 in window1 and application 105 in window2)
3. Go to shared components in both windows (window1 first)
- window1 breadcrumbs show: Home > Application Builder > Application 103 > Shared Components
- window2 breadcrumbs show: Home > Application Builder > Application 105 > Shared Components
4. Click in any shared component in window1 (Templates, Authentication Schemes...)
- window1 breadcrumbs show: Home > Application Builder > Application *105* > Shared Components > Templates (Application 105 instead of 103)
Is it a bug? I have read the known issues [[Here]|http://www.oracle.com/technetwork/developer-tools/apex/downloads/apex402knownissues-189793.html] but it does not appear.
Related Data:
Application Express version 4.0.2.00.07
Firefox 3.6.15
SO: Windows XP
The error is not reproduced with IE7. I have not tested any other browser.
Regards,
MolinaIf you tried opening up two pages in the same application each of which modifies the same page items, you would notice the same issue.
This is because, in a session there is only one set of values for page items(or application items) and every parallel call to the same page would update the same bind variables.
Now the development environment or Apex Builder is also an apex application , and when try and open up the pages as you mentioned, they both access the same Application Builder page and sets/resets any existing values for those variables(and maybe cookies too if they are being used) , hence the 'mixing up'.
If that didn't convince you, check the URL of both the pages when you load them, they should show the same page number ( f?p=APP_ID:PAGE_NUMBER syntax). Imagine if the same approach was done with one of your application pages, say an edit form opened from a report with multiple records in multiple tabs like what happened with this case: {message:id=9346663}
So this really isn't a bug in a way, because that is how session states in apex is/was maintained. Ofcourse if they used another kind of development platform for building pages, it may have been avoided, but thats an altogether different point in itself. -
Hi guys,
I bring this problem here may somebody experienced that.
I developed two client side applications(applets) with JDev3.2.3.
Locate them on Apache/Tomcat. There is also a
Index.html file with two links, so when user clicks on
each link the associated application will downloaded
on his/her PC and ready to work. (In index.html I used
JavaScript function window.open(…) to load the applications)
Now please see this scenario:
1-I ran/loaded both application in two separate
browsers(IE5.5). And tried to work with them(minimized
one and work with another). Soon I faced unexpected
frizzing/locking or very slow running on both
applications.
2-Then closed/killed one of them(killed IE). Then
re-executed same application again. The application
loaded with the last activated screen . Seems it never
killed and it was still alive.
3- The only way to successfully working is one by one.
Means execute & work with one, then kill that, and
then execute and work with another. Which is not expected
in the Windows enviroment.
To Debug:
When both applications were running(each on it’s own
IE), I opened the Task Manager and saw there was only
one IEXPLORER.EXE was running, also there was only one
Java VM (a little bird icon) on right-bottom of the
screen.
I believe this causes the problem. Seems they both
running in the same session. Since I opened two
applications in two IE I was expected to see two
IEXPLORER.EXE with two JVM. Am I right? Do you think
so?
Any way, Now I am seeking to find the solution. My
primary mind says probably I should not use
window.open(..) in index.html to load the
applications.
Would appreciate any command on this.Same thing with me! My microphone doesn't even register in anything but ventrilo!
It's dri'ves me NUTS! I bought the card (xfi fatalty) for a really good price, but I almost regret even looking into the soundcard because of this bug. I know Vista is a new operating system..but I figure'd this kind of update should have been noticed MUCH earlier..
Please creative, can you fix this?
On another note..is there a sound quality difference between using an x-fi in vista vs xp?
*not meaning to thread jack*
finally..
you should probably close the other thread.. You made two, you know. -
So, I am migrating mailboxes to a 2013 EXC from a 2010 EXC. Both in same subnet on same domain. Firewall on WIndows disabled:
Setup batch move on 2013 box. But users logs are getting
StalledDueToMailboxLock in the status as well as
Transient error MapiExceptionNetworkError has occurred. The system will retry (1/60).
also, The mailboxes eventually migrate over 2-3 days. some quicker some with out error. Error comes up with mailboxes that users do not use. I have a lot of users to migrate and cannot migrate as such a slow pace.
Any Ideas of the error??
RunspaceId : 6c688e69-8ba8-4044-9807-7f56d35be440
MailboxIdentity : bwa.local/BWA/UK/UK User Redirect/Angie Dolan
DistinguishedName : CN=Angie Dolan,OU=UK User Redirect,OU=UK,OU=BWA,DC=bwa,DC=local
DisplayName : Angie Dolan
Alias : adolan
ExchangeGuid : 4c60f493-e5f5-46bb-adf1-9bea9790f5ca
ArchiveGuid :
Status : InProgress
StatusDetail : StalledDueToMailboxLock
SyncStage : CopyingMessages
Flags : IntraOrg, Pull
RequestStyle : IntraOrg
Direction : Pull
IsOffline : False
Protect : False
DoNotPreserveMailboxSignature : True
Priority : Normal
WorkloadType : Local
Suspend : False
SuspendWhenReadyToComplete : False
IgnoreRuleLimitErrors : False
RecipientTypeDetails : UserMailbox
SourceVersion : Version 14.3 (Build 123.0)
SourceDatabase : Mailbox Database 1691384683
SourceServer : CLOUD-EXC-01.bwa.local
TargetVersion : Version 15.0 (Build 775.0)
TargetDatabase : Mailbox Database 0192305397
TargetServer : CLOUD-EXC-02.bwa.local
SourceArchiveDatabase :
SourceArchiveVersion :
SourceArchiveServer :
TargetArchiveDatabase :
TargetArchiveVersion :
TargetArchiveServer :
RemoteHostName :
RemoteGlobalCatalog :
BatchName : MigrationService:b
StartAfter :
CompleteAfter :
RemoteCredentialUsername :
RemoteDatabaseName :
RemoteDatabaseGuid :
RemoteArchiveDatabaseName :
RemoteArchiveDatabaseGuid :
TargetDeliveryDomain :
ArchiveDomain :
BadItemLimit : 0
BadItemsEncountered : 0
LargeItemLimit : 0
LargeItemsEncountered : 0
AllowLargeItems : True
QueuedTimestamp : 3/23/2014 1:06:19 PM
StartTimestamp : 3/23/2014 1:06:27 PM
LastUpdateTimestamp : 3/23/2014 1:25:13 PM
InitialSeedingCompletedTimestamp :
FinalSyncTimestamp :
CompletionTimestamp :
SuspendedTimestamp :
OverallDuration : 00:22:38
TotalFinalizationDuration :
TotalDataReplicationWaitDuration :
TotalSuspendedDuration :
TotalFailedDuration :
TotalQueuedDuration : 00:00:03
TotalInProgressDuration : 00:22:34
TotalStalledDueToCIDuration :
TotalStalledDueToHADuration :
TotalStalledDueToMailboxLockedDuration : 00:13:47
TotalStalledDueToReadThrottle :
TotalStalledDueToWriteThrottle : 00:02:14
TotalStalledDueToReadCpu :
TotalStalledDueToWriteCpu : 00:00:04
TotalStalledDueToReadUnknown :
TotalStalledDueToWriteUnknown :
TotalTransientFailureDuration : 00:01:36
TotalProxyBackoffDuration :
TotalIdleDuration : 00:04:45
MRSServerName :
TotalMailboxSize : 3.534 GB (3,795,059,862 bytes)
TotalMailboxItemCount : 20741
TotalArchiveSize :
TotalArchiveItemCount :
BytesTransferred : 59.82 MB (62,723,648 bytes)
BytesTransferredPerMinute :
ItemsTransferred : 412
PercentComplete : 25
CompletedRequestAgeLimit : 7.00:00:00
PositionInQueue :
InternalFlags : SkipFolderPromotedProperties, WordBreak
FailureCode :
FailureType :
FailureSide :
Message : Informational: The request has been temporarily postponed because the mailbo
is locked. The Microsoft Exchange Mailbox Replication service will attempt t
continue processing the request after 3/23/2014 1:30:13 PM.
FailureTimestamp :
IsValid : True
ValidationMessage :
RequestGuid : 55c14015-1bca-48eb-bb79-25b480464bfb
RequestQueue : Mailbox Database 0192305397
Identity : bwa.local/BWA/UK/UK User Redirect/Angie Dolan
DiagnosticInfo :
Report : 3/23/2014 1:06:19 PM [CLOUD-EXC-02] '' created move request.
3/23/2014 1:06:26 PM [CLOUD-EXC-02] The Microsoft Exchange Mailbox
Replication service 'CLOUD-EXC-02.bwa.local' (15.0.775.35 caps:3F) is
examining the request.
3/23/2014 1:06:26 PM [CLOUD-EXC-02] Connected to target mailbox 'Primary
(4c60f493-e5f5-46bb-adf1-9bea9790f5ca)', database 'Mailbox Database
0192305397', Mailbox server 'CLOUD-EXC-02.bwa.local' Version 15.0 (Build
775.0).
3/23/2014 1:06:26 PM [CLOUD-EXC-02] Connected to source mailbox 'Primary
(4c60f493-e5f5-46bb-adf1-9bea9790f5ca)', database 'Mailbox Database
1691384683', Mailbox server 'CLOUD-EXC-01.bwa.local' Version 14.3 (Build
123.0).
3/23/2014 1:06:27 PM [CLOUD-EXC-02] Request processing started.
3/23/2014 1:06:27 PM [CLOUD-EXC-02] Source mailbox information:
Regular Items: 17941, 3.509 GB (3,767,437,011 bytes)
Regular Deleted Items: 2435, 26.34 MB (27,622,851 bytes)
FAI Items: 365, 0 B (0 bytes)
FAI Deleted Items: 0, 0 B (0 bytes)
3/23/2014 1:06:27 PM [CLOUD-EXC-02] Mailbox signature will not be preserved
for mailbox 'Primary (4c60f493-e5f5-46bb-adf1-9bea9790f5ca)'. Outlook client
will need to restart to access the moved mailbox.
3/23/2014 1:06:29 PM [CLOUD-EXC-02] Stage: CreatingFolderHierarchy. Percent
complete: 10.
3/23/2014 1:06:36 PM [CLOUD-EXC-02] Initializing folder hierarchy from
mailbox 'Primary (4c60f493-e5f5-46bb-adf1-9bea9790f5ca)': 370 folders total.
3/23/2014 1:06:36 PM [CLOUD-EXC-02] Folder creation progress: 0 folders
created in mailbox 'Primary (4c60f493-e5f5-46bb-adf1-9bea9790f5ca)'.
3/23/2014 1:06:53 PM [CLOUD-EXC-02] Folder hierarchy initialized for mailbox
'Primary (4c60f493-e5f5-46bb-adf1-9bea9790f5ca)': 369 folders created.
3/23/2014 1:06:53 PM [CLOUD-EXC-02] Stage: CreatingInitialSyncCheckpoint.
Percent complete: 15.
3/23/2014 1:07:58 PM [CLOUD-EXC-02] Initial sync checkpoint progress: 0/370
folders processed. Currently processing mailbox 'Primary
(4c60f493-e5f5-46bb-adf1-9bea9790f5ca)'.
3/23/2014 1:07:59 PM [CLOUD-EXC-02] Transient error MapiExceptionNetworkErro
has occurred. The system will retry (1/60).
3/23/2014 1:08:31 PM [CLOUD-EXC-02] The Microsoft Exchange Mailbox
Replication service 'CLOUD-EXC-02.bwa.local' (15.0.775.35 caps:3F) is
examining the request.
3/23/2014 1:08:31 PM [CLOUD-EXC-02] Connected to target mailbox 'Primary
(4c60f493-e5f5-46bb-adf1-9bea9790f5ca)', database 'Mailbox Database
0192305397', Mailbox server 'CLOUD-EXC-02.bwa.local' Version 15.0 (Build
775.0).
3/23/2014 1:08:31 PM [CLOUD-EXC-02] Connected to source mailbox 'Primary
(4c60f493-e5f5-46bb-adf1-9bea9790f5ca)', database 'Mailbox Database
1691384683', Mailbox server 'CLOUD-EXC-01.bwa.local' Version 14.3 (Build
123.0).
3/23/2014 1:08:33 PM [CLOUD-EXC-02] Relinquishing job because the mailbox is
locked. The job will attempt to continue again after 3/23/2014 1:13:33 PM.
3/23/2014 1:13:36 PM [CLOUD-EXC-02] The Microsoft Exchange Mailbox
Replication service 'CLOUD-EXC-02.bwa.local' (15.0.775.35 caps:3F) is
examining the request.
3/23/2014 1:13:37 PM [CLOUD-EXC-02] Connected to target mailbox 'Primary
(4c60f493-e5f5-46bb-adf1-9bea9790f5ca)', database 'Mailbox Database
0192305397', Mailbox server 'CLOUD-EXC-02.bwa.local' Version 15.0 (Build
775.0).
3/23/2014 1:13:37 PM [CLOUD-EXC-02] Connected to source mailbox 'Primary
(4c60f493-e5f5-46bb-adf1-9bea9790f5ca)', database 'Mailbox Database
1691384683', Mailbox server 'CLOUD-EXC-01.bwa.local' Version 14.3 (Build
123.0).
3/23/2014 1:13:38 PM [CLOUD-EXC-02] Request processing continued, stage
CreatingInitialSyncCheckpoint.
3/23/2014 1:13:39 PM [CLOUD-EXC-02] Initial sync checkpoint progress: 0/370
folders processed. Currently processing mailbox 'Primary
(4c60f493-e5f5-46bb-adf1-9bea9790f5ca)'.
3/23/2014 1:13:47 PM [CLOUD-EXC-02] Initial sync checkpoint completed: 354
folders processed.
3/23/2014 1:13:47 PM [CLOUD-EXC-02] Stage: LoadingMessages. Percent complete
20.
3/23/2014 1:14:34 PM [CLOUD-EXC-02] Messages have been enumerated
successfully. 20738 items loaded. Total size: 3.535 GB (3,795,484,545 bytes)
3/23/2014 1:14:34 PM [CLOUD-EXC-02] Stage: CopyingMessages. Percent complete
25.
3/23/2014 1:14:34 PM [CLOUD-EXC-02] Copy progress: 0/20738 messages, 0 B (0
bytes)/3.535 GB (3,795,484,545 bytes), 12/370 folders completed.
3/23/2014 1:16:45 PM [CLOUD-EXC-02] Transient error MapiExceptionNetworkErro
has occurred. The system will retry (1/60).
3/23/2014 1:17:17 PM [CLOUD-EXC-02] The Microsoft Exchange Mailbox
Replication service 'CLOUD-EXC-02.bwa.local' (15.0.775.35 caps:3F) is
examining the request.
3/23/2014 1:17:17 PM [CLOUD-EXC-02] Connected to target mailbox 'Primary
(4c60f493-e5f5-46bb-adf1-9bea9790f5ca)', database 'Mailbox Database
0192305397', Mailbox server 'CLOUD-EXC-02.bwa.local' Version 15.0 (Build
775.0).
3/23/2014 1:17:17 PM [CLOUD-EXC-02] Connected to source mailbox 'Primary
(4c60f493-e5f5-46bb-adf1-9bea9790f5ca)', database 'Mailbox Database
1691384683', Mailbox server 'CLOUD-EXC-01.bwa.local' Version 14.3 (Build
123.0).
3/23/2014 1:17:17 PM [CLOUD-EXC-02] Relinquishing job because the mailbox is
locked. The job will attempt to continue again after 3/23/2014 1:22:17 PM.
3/23/2014 1:22:39 PM [CLOUD-EXC-02] The Microsoft Exchange Mailbox
Replication service 'CLOUD-EXC-02.bwa.local' (15.0.775.35 caps:3F) is
examining the request.
3/23/2014 1:22:39 PM [CLOUD-EXC-02] Connected to target mailbox 'Primary
(4c60f493-e5f5-46bb-adf1-9bea9790f5ca)', database 'Mailbox Database
0192305397', Mailbox server 'CLOUD-EXC-02.bwa.local' Version 15.0 (Build
775.0).
3/23/2014 1:22:39 PM [CLOUD-EXC-02] Connected to source mailbox 'Primary
(4c60f493-e5f5-46bb-adf1-9bea9790f5ca)', database 'Mailbox Database
1691384683', Mailbox server 'CLOUD-EXC-01.bwa.local' Version 14.3 (Build
123.0).
3/23/2014 1:22:39 PM [CLOUD-EXC-02] Request processing continued, stage
LoadingMessages.
3/23/2014 1:22:40 PM [CLOUD-EXC-02] Messages have been enumerated
successfully. 20738 items loaded. Total size: 3.535 GB (3,795,484,545 bytes)
3/23/2014 1:22:40 PM [CLOUD-EXC-02] Stage: CopyingMessages. Percent complete
25.
3/23/2014 1:22:40 PM [CLOUD-EXC-02] Copy progress: 0/20738 messages, 0 B (0
bytes)/3.535 GB (3,795,484,545 bytes), 12/370 folders completed.
3/23/2014 1:24:41 PM [CLOUD-EXC-02] Transient error MapiExceptionNetworkErro
has occurred. The system will retry (1/60).
3/23/2014 1:25:13 PM [CLOUD-EXC-02] The Microsoft Exchange Mailbox
Replication service 'CLOUD-EXC-02.bwa.local' (15.0.775.35 caps:3F) is
examining the request.
3/23/2014 1:25:13 PM [CLOUD-EXC-02] Connected to target mailbox 'Primary
(4c60f493-e5f5-46bb-adf1-9bea9790f5ca)', database 'Mailbox Database
0192305397', Mailbox server 'CLOUD-EXC-02.bwa.local' Version 15.0 (Build
775.0).
3/23/2014 1:25:13 PM [CLOUD-EXC-02] Connected to source mailbox 'Primary
(4c60f493-e5f5-46bb-adf1-9bea9790f5ca)', database 'Mailbox Database
1691384683', Mailbox server 'CLOUD-EXC-01.bwa.local' Version 14.3 (Build
123.0).
3/23/2014 1:25:13 PM [CLOUD-EXC-02] Relinquishing job because the mailbox is
locked. The job will attempt to continue again after 3/23/2014 1:30:13 PM.
ObjectState : NewHow Many CAS Servers do you have?
Did you changed the web.config file of MRS on both exchange 2010 and 2013 CAS servers?
http://thoughtsofanidlemind.com/2010/12/03/tweaking-the-mailbox-replication-service-configuration-file/
Question:
How much time does it takes for 100 MB mailbox to move from 2010 to 2013?
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com Twitter:
LinkedIn:
Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose. -
Working with mutiple windows at the same time
I'm using a rtm which selects various vi's, I want each of the vi's to up-date with data all the time as they are selected. The problem is that, as each one is selected the others stop receiving data. I have to highlight each one again I have tried to use Globals but this isn't working to well. Any idea's with examples would be handy
If you call the VIs statically in the same loop when they are selected then data flow will prevent anything from happening until the one already running has stopped.
If you want them to run in parallell you'll have to call them so that they do not stop the data flow from calling the others...that means calling them in separate loops or dynamically using an invoke node with the wait until finished flag set to false.
MTO -
How can I work with two images at the same time?
I have downloaded Photoshop Elements 10 and I can not find the buttons for Minimize or Reset for the image. If I rightclick the miniature those options are grey. If I open two images so I have two miniatures in the holder and then go to Windows and Images the option Show Overlapping is grey but I can show Side by side. Then I can only shut down the images.
Thanks for help
BibbiOpen the Editor and on the menu bar click:
Edit à Preferences à General
Check the box “Allow Floating documents in Full Edit Mode” and click OK.
-
Working on a project with 5 movies at the same time andone movie project will not open I can see it and play it but can't open to work on it or share or copy it, what should I do?
WHat version of iMovie?
ANd for iPad or iPhone?
Are you having issues opening a video you took on the device?
OR an issue opening a project you previously created? -
Recording Video and Audio at Same time with simultaneous sync
I want to record a keyboard performance into garageband and at the same time record the playing of that performance with my video camera. Then I want to create a movie using the music from garageband and the video from the camera. I was thinking that if I can sync the video and audio when I'm recording the session, then that part is taken care of. Or, maybe this is easier than I think it is?
Is there a way to do this so that I can use the garageband record performance and have it synced to the video on the camera?
I don't want to use the audio from the video camera because the performance that is captured in Garageband will be much better and I can do editing of the individual notes in GB.
In the end, I just want to make a movie and/or podcast of the performance.
I'm a newbie regarding this, but I did search the forums and couldn't find anything specific. Mostly it was about importing video into GB3 and then syncing new audio. I'll basically have audio and video from the same performance in two separate locations and I want to bring them together perfectly in Garageband.
Thanks for any help you can provide.
Powerbook G4 - DVI Mac OS X (10.4.9)Okay. I got the video and audio all together. I told you I'd link to it when it was up.
http://www.youtube.com/watch?v=FxssYpUNJm8
There's also a copy of it at http://www.myspace.com/bonjimmy/
And as a quick side comment, even though I uploaded the same video to both YouTube and MySpace, the MySpace version is much better. YouTube must do something to the video after it's uploaded.
What I learned doing this project:
I recorded the video first (which gave me the sequencing of the piano performance) and then I dubbed the audio in later. However, there wasn't a good way to sync the video and the prerecorded piano, so there are some spots where the dubbed audio vocal isn't accurate to the video. I'm not sure what the pros do for this. I was hoping I'd remember how I sang for the video but when a couple weeks go by before re-doing the audio, it's about impossible. I tried, though.
I remember working with an old 4-track and smpte to a sequencer a long time ago. With the way it is now, it's pretty cool that you can record digitally and mix and match and everything falls together perfectly as long as you have a place to match the video and the audio. It's pretty cool.
What else???
Does anyone have suggestions that would have made it better? Also, if you have suggestions on my performance or whatever, I'd love comments, but you can do that on the linked page.
Thanks again for all your help. (The point of the video is because I'm thinking about getting back out there and doing some more playing... I'm looking for a band or something else interesting...)
Powerbook G4 - DVI Mac OS X (10.4.10) -
1. Working with DV and HDV in the same project 2. importing music error
1. I am working on a project that was shot with both HD and DV footage. What is the best way to work with both types of files on the same time line so that I can compress them to DV format video?
2. Also, I am having a problem importing music files into Premier. The error message pops up and says that it has an error compiling movie.I am not sure what setting i need to change to get this to work. I am working with MP3 files like I have done with past projects but nothing seems to work. Please help.i "I have never worked with with soundbooth but i changed the file type to WAV but had to use IMA ADPCM for the Audio options because I could not save the uncompressed type."
Ellis,
How did you "change" the MP3 - what program did you use? You might want to explore Soundbooth, as Aanarav suggests. It works well with PP & Encore.
[EDIT] I use Audition, but think Soundbooth would be a good choice, as it is bundled in the Production Studio CS3.
Many folk have problems with MP3 files, for whatever reason. You should be able to convert to PCM WAV from any number of good conversion programs.
I use a fair number of MP3's in PP and have never had any trouble. Some others have never been so lucky.
Hunt -
I like the idea of auto back-up for my new iMac, Ipad and PC Netbook, particularly if I can access all files and data stored on any device. But I have a Conceptronic router.
1. Will Time Capsule work with this and how?
2. Can my printer USB be plugged in and then shared between the devices?
3. Can I create a network and how?
4. What happend when a visitor logs onto my existing wireless router?
I'm new to Macs (well a returning user having started with Mac Plus!!) and not very technical. Any help / advice will be much appreciated.
RayThe key to what you seem to want to do is to be able to get Apple's Time Capsule router to "join" the network that your Conceptronic router. I believe that works with some third-party routers, but I've never seen a list of those that work in such a configuration and I have no experience with Conceptronic equipment.
You might be better off with a Network-Attached Storage (NAS) device instead of a Time Capsule. -
I purchased Adobe photoshop elements II and Adobe premiere elements II. They are both on one disc. My computer crasded and I had to reload Windows. I only have one serial number and it only works with photoshop II. The same serial number will not work for Premiere. I dont have any other serial numbers. What do I do???
Static_Unit
I am getting a bit concerned about what is happening in your situation. Yesterday you posted your question in at least two different forums, one of them being here in the Premiere Elements Forum.
Don't Have Serial Number for Premiere, Only Photoshop?
Wherever you posted, the reply was to contact Adobe via its Adobe Chat. It is the only one who can sort out this matter for you.
In the thread cited above I offered to help you with the difficulties that you were having visualizing the Adobe Chat in its web page. I was waiting for your follow up on that in the above thread. Instead, I find your same question in a new Adobe Premiere Elements Forum thread this afternoon with no refer the prior threads or prior recommendations given you.
I will also mention again...when you buy the Photoshop Elements and Premiere Elements bundled in one packaging and with installation files for each on the same installation disc, each program has its own serial number. The Photoshop Elements serial number does not work for Premiere Elements and vice versa. The serial numbers are on labels on a box which houses the installation disc envelope(s). So, if you purchased both programs and found the Photoshop Elements serial number, then the Premiere Elements serial number should be in a label right underneath the label with the serial number for Photoshop Elements. I recall writing this in your yesterday's thread on this matter.
The moderator will no doubt be along shortly to close or delete this thread. So, just in case, please bookmark your yesterday's thread cited above so that we can continue this communication which is trying to help you.
Thanks.
ATR -
Bluetooth seems like working since last week and at the same time I can't manage the Wi-Fi
Bluetooth seems like working since last week and at the same time I can't manage the Wi-Fi. I have already restored.
This entire thing is a hair over four months old, I don't think it should be acting up this much. Plus, this problem happens only once out of every 40 or 50 times I start this thing up. It's very infrequent, but it's there, and it just bothers me, I guess.
That said, I would try reinstalling, but I wouldn't be able to tell if it'd worked unless the problem never cropped up again in a long, long time. Sadly I also don't have access to my OSX discs at the moment (I'm out of the country). -
FCPX 10.0.7 collapses when working with 25p and 23,98p clips in the same timeline.
Did anybody reported this? never happened to me in previous versions.
It seems to be solved when transcoding the 25p clips to 23,98p (both Canon EOS 5dMKII clips)
But *** it must work!
ThanxFCPX 10.0.7 collapses when working with 25p and 23,98p clips in the same timeline.
Did anybody reported this? never happened to me in previous versions.
It seems to be solved when transcoding the 25p clips to 23,98p (both Canon EOS 5dMKII clips)
But *** it must work!
Thanx -
I have lost the remote that was paired. I bought another remote, but the procedure to pair the new one does not work. I suspect the the AT will work with only one remote at-a-time and i have to unpair the first before pairing the second. If this is true, how do I unpair? If not, what can I do?
I was premature in posting the question. I found the answer in andother posting, and it was successful.
Thanks, and sorry for the false alarm. -
Hello, my itunes app is getting shut down every time I want to open it.
I don't know if it's related but ever since I downloaded the last two updates. I tryed reparing the file and uninstalling and installing several times. Still, is not working. I work with music and need my itunes up and running. Does anybody know how to fix this?Hi Vero Torres,
If you are having issues with iTunes unexpectedly quitting on launch after on your Windows machine, you may find the troubleshooting steps outlined in the following article helpful:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Regards,
- Brenden
Maybe you are looking for
-
Attaching files to individual parts in a 3D model.
Hi, I am trying to find out if it is possible to create an attachment in adobe 3D to allow an end-user to highlight a specific part in a model and from there be able to select from a list of related attachments, such as data sheets, word documents et
-
Iphone not working with itunes
Just got an Iphone 3gs. Downloaded itunes but when i plug the phone in it says "this iphone cannot be used because the required software is not installed. Run the itunes installer toi remove itunes and install the 64 bit version." The version i have
-
Value is displayed as -* for some cells though it has value
Hello I have one report in which I am displaying amount for each cost center (Hierarchy has been activated for cost center) In report, for some cells it is displaying correct values for amount but for some cells it is displaying -* but when I select
-
7.7 won't install for me
I'm assuming I need to install the 7.7 software because the CD my Mini I-pod came with in 2005 isn't working and I need my computer to recognize my I-pod. 7.7 is the softwware that would replace the CD the Ipod came with? Correct? I tried installing
-
I'm a little unsure which forum to post this in but I guess an abapper is the most likely to know the answer to this. When we create a new Business Partner it creates a new record in table CDPOS with an indicator of 'I' (for Insert) - this is what we