Working with standard interface

I am trying to add audio to a video clip. My problem is this, when I open STP (FCS 2) it opens with the standard interface-audio tracks 1-4 with controls for each track interface has a grey background. When I bring in my video clip the interface changes to a green background (waveform). I want to be able to do my editing in the standard interface. Can't figure out what I'm doing wrong. Can anyone help?
Thanks
Jeff

hey there,
you have posted in the Soundtrack Discussion, not the Soundtrack Pro Discussion. you should post your question there.
good luck

Similar Messages

Does Oracle OSFM work with standard MRP in R12.1?

Hello All,
We are in R12.1.3. I read in the OSFM User Guide that Lot Based Jobs don’t work with ASCP and a comment about OM and Oracle Projects. We are currently using standard MRP. Yesterday i came to know that OSFM will not work with standard MRP. Please let me know if there is a way to make OSFM work with Standard MRP.
We don't have ASCP and are not planning to implement it for this requirement.
Thanks,
Vishnu

Hi,
The static INIT() functions were added to the ORDIMAGE/AUDIO/VIDEO types
in 8.1.7 to make it easier for applications to construct an ORDIMAGE/etc
object. Given a simple table, eg:
CREATE TABLE IMAGES ( ID INTEGER, IMAGE ORDSYS.ORDIMAGE );
In 8.1.7 and later its simply a matter of the following to insert a new row:
INSERT INTO IMAGES VALUES ( 42, ORDSYS.ORDIMAGE.INIT() );
Where ORDSYS.ORDIMAGE.INIT() is simply a static function that returns an
initialized ORDSYS.ORDIMAGE object. Prior to 8.1.7, it was necessary to
use the standard database object type constructor syntax to initialize
an ORDSYS.ORDIMAGE object. For example:
INSERT INTO IMAGES VALUES (
42,
ORDSYS.ORDIMAGE(
ORDSYS.ORDSOURCE( EMPTY_BLOB(), NULL, NULL, NULL, NULL, 0 ),
NULL, NULL, NULL, NULL, NULL, NULL, NULL ) );
Below I've included some PL/SQL functions that you can use with 8.1.6 instead
of having to use the full constructor.
Hope this helps,
Simon
CREATE OR REPLACE FUNCTION ORDIMAGE_INIT RETURN ORDSYS.ORDIMAGE AS
BEGIN
RETURN ORDSYS.ORDIMAGE(
ORDSYS.ORDSOURCE( EMPTY_BLOB(), NULL, NULL, NULL, NULL, 0 ),
NULL, NULL, NULL, NULL, NULL, NULL, NULL );
END;
CREATE OR REPLACE FUNCTION ORDAUDIO_INIT RETURN ORDSYS.ORDAUDIO AS
BEGIN
RETURN ORDSYS.ORDAUDIO(
NULL,
ORDSYS.ORDSOURCE( EMPTY_BLOB(), NULL, NULL, NULL, NULL, 0 ),
NULL, NULL, EMPTY_CLOB(), NULL, NULL, NULL, NULL, NULL, NULL );
END;
CREATE OR REPLACE FUNCTION ORDVIDEO_INIT RETURN ORDSYS.ORDVIDEO AS
BEGIN
RETURN ORDSYS.ORDVIDEO(
NULL,
ORDSYS.ORDSOURCE( EMPTY_BLOB(), NULL, NULL, NULL, NULL, 0 ),
NULL, NULL, EMPTY_CLOB(), NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL );
END;
null

How to upload taxes while working with po interface

Hi 2 all,
While working with PO interface we need to upload bulk of line items as it is working fine..
for every line we have to upload taxes also is it possible to upload taxes with po interface?
Regards
Siva

Now I get Facelets work with my JSPs.
I added the below to my web.xml:
<servlet-mapping>
          <servlet-name>Faces Servlet</servlet-name>
          <url-pattern>*.jsf</url-pattern>
     </servlet-mapping>
     <servlet-mapping>
          <servlet-name>Faces Servlet</servlet-name>
          <url-pattern>/faces/*</url-pattern>
     </servlet-mapping>
I am not clear in understandin what's the significance in using /faces/*. From my understanding the below should work as well. Help me in understanding where I'm goin wrong.
<servlet-mapping>
          <servlet-name>Faces Servlet</servlet-name>
          <url-pattern>*.jsf</url-pattern>
     </servlet-mapping>
     <servlet-mapping>
          <servlet-name>Faces Servlet</servlet-name>
          <url-pattern>*.xhtml</url-pattern>
     </servlet-mapping>
I have a requirement where the page should navigate from a JSP to a .xhtml(facelets page). Please help me out with this.

I would like to know if labview can works with hp82335b interface

I would like to know if labview can works with hp82335b interface for instruments data aquisitions

Hi,
on following link: http://ftp.agilent.com/pub/mpusup/pc/old/hp_over.html
they say:
"The 82335 will not work under National Instruments Labview in any way, shape, or form. In general, it will not work on any product that doesn't specify that it does work.
There are no plans for any improvements to this product and no engineering resources on it."
In case this is true, you will go into trouble with
your card using LabVIEW.
Regards
wha

Working with Standard mappings of product content

Hi,
Let me know any one worked with the (_MDMProductSetMsg,_ProductRelationSetMsg) standard mapping(s) for importing Taxonomy table data in to product repository..
Thanks,
Rupesh K

Tom has step by step here:
http://www.fcpbook.com/Video5.html
The subclips should behave like a regular clip.
If you experience flakey behaviour with FCE, trash the FCE Preferences.
When I view the subclip in the canvas and mark in and out positions
I hope you mean the Viewer where you mark in/out points otherwisw it won't work as expected.
Mark an in/out in the Viewer then drag the Viewer clip onto the Insert Canvas Overlay or Overwrite depending on the type of edit required.
Al

Mainstage not working with audio interface

Hi,
I'm having problems in using Mainstage with my audio interface, a Tascam US-600.
Mainstage does not receive any input signals when I connect a microphone or a guitar into the Tascam and use it with Mainstage. I selected the audio interface as audio input and tried with all the inputs (from 1 to 6) that the channel strip let me select. For the audio output, when I select the built-in output I can not hear nothing; when I select the Tascam outputs, I can hear just the NON-PROCESSED sounds.
I don't know what to do, because I realized these other facts:
     - Mainstage works with a MIDI device directly connected to the Mac with a MIDI-USB cable;
     - The Tascam, as written above, receive the input signals. Using it with GarageBand it gives me no problems, with the same instruments (both                microphones, guitars and the audio interface) and connections!
     - Also if it gives me problems with feedbacks and noises, the built-in microphone seems to work with Mainstage - at least MS recognise input signals.
Thanks in advance for your answers and sorry for my English if it's not so smooth.
Francesco

dmriveratre wrote:
The problem is that since the MacBook only has two USB ports, I am having to use a USB hub. <snip>
When I quit Mainstage and unplug the USB hub and only using either both interfaces, or one interface and the midi controller, it works fine.
Hi
Is the Hub a powered one or ?
Sounds like you need a better (powered?) one
CCT
edit
Could be an overall power limitation if everything is bus powered? Can you use external PSU's for any of the kit?

Work with RS232 interface

Hi all!
I want to sent commands on specific RS232 devices (on local machine, NOT WITH SERVER devices).
While searching , find some discussion about it, here says - you can communicate it with Cirrus for example. So, im never worked with Cirrus.
Please tell me, how I can communicate with local machine COM ports .
So if its possible, show me instructions for start work with Cirrus ( inital knowledge)
Thank.

If it has an RS-232 interface, you should be able to do it..
It may simply send an id-tag when it is in proximity.. The proximity simply sends enery to a coil (transformer) which activates the chip to transmit a small RF signal containing the badge id.

Flash Player does not work with Standard User, but will work when browser is "Run as Administrator"

I don't understand why this is happening, but Flash Player will not work when a Standard User is using the browser. It will only work when the browser is run as an administrator. Any way to fix this? I've tried to uninstall, and reinstall the player, and it still wouldn't work.
The user is on Windows 7, 64-bit. Using IE 10.
Flash not working for Standard User - YouTube

Any update to provide at all here guys? Again, in my situation, it's very much rights-related as a standard user doesn't even report that the flash player exists when testing it on the Adobe Flash Version Detection website (despite it showing up in Control Panel and under Add/Remove Programs). I've already tried giving the C:\Windows\System32\Macromed and files/subfolders appropriate permissions for the standard user and still nothing. If I either give the user in question full local admin rights or logon as the domain admin, then the Adobe Flash Version Detection website says Flash is installed and Flash works fine.
Thoughts???

Problem while working with Standard KM Layoutset

Hi All,
We are facing a typical problem with KM layout sets.
Few of the standard layout sets are not working
like NewsBrowser.
When we navigate into the folder of the iview it throughs error
403
The requested operation is forbidden for this resource.
We navigate to the layout set link under
System admin>Km adminstration>Content managment-->User Interface (here we get warning Invalid areas Settings)
--> Setting(here we get a warning Invalid topics layout set)
Please help us in this regards.
Sai

Hello Sai,
I seriously doubt that the layout set is the reason you're getting a 403 Forbidden error, are you sure this pccMimesSelector layout set is the one being used by your iview? You can check this in the properties of the iview in the PCD.
It's more likely the error is in fact caused by some authorisation issues with the content you are trying to view? So where is this content stored? What type of repository? If it's a CM repository then what's the persistence mode? Does the issue happen for all users, even admin users? What permissions do you have defined for the affected users on these resources? If you browse to the resources that should be displayed in this iview from Content Admin > KM Content are you able to access them without issues? Do you have anonymous access enabled on your system?
It would be a good idea to have a look at the default trace file when you reproduce this issue to see if there is anything relevant traced.
It's not a good idea to go deleting layout sets, especially SAP delivered layout sets, as these could be used in various different locations and this would most likely lead to further inconsistencies.
Regards,
Lorcan.

How to make in/out Port vis work with COM interface under different windows versions?

Hello!
I know that the accessHW is necessary for it, so I downlaoded the
this file from the homepage of NI, but there are always some problems
with it.
My program should get the the voltage impulse between
the pins DTR and RTS of a COM interface. After
I installed accessHW under winNT, the voltage between them changed
automatically from 0 mV to about 24 mV , and program
worked well . But this way does not work under Win98 and Win2000,
and this voltage is always 0 so that the device can not make any voltage
impulse.
Could someone give me a software solution for it? Thanks!
P.S:The version of the labview I use is 6.1.
Le

You shouldn't depend on a voltage difference between the tow pins unless you need something like 24 volts and not 24 millvolts. All of the signal lines are referenced to ground and the signal lines usually swing between -3 to -12 and +3 to +12 volts. If you truly saw a 24 millivolt difference between two signal leads, then all that means is that they are both at the same logic state. A difference of 24 millivolts is not much and has to do with the UART in your computer and not accessHW I believe though maybe what happened is that the difference is 24mv when both are logic "1" and less when logic "0" or vice versa. If your device requires power from the serial port, then what you'll have to do is control the signal lines in your program and I
would recomend VISA to do that instead of inport/outport. And check the voltage requirements of your device. If this is a device you designed, it should be designed for the lower voltages on new pc's and laptops. In other words, I would depend on 3 volt signals instead of 12. There are numerous references to either RS-232 or EIA-232 on the web. I think a review of the electrical specifications is needed.

Working with standard DV subclips

Greetings.
Since purchasing an HDV camera a couple of years ago most of my editing has been on HD clips. Now though, I am doing a project on an older DV camera and am noticing some differences that I can't explain and was hoping for some help.
I imported a long clip and then used the Mark DV stops in the time code to mark the clip. I then reviewed the master clip and created subclips from the markers for those clips that I intended to use.
One thing I have noticed that I am perplexed by:
When I view the subclip in the canvas and mark in and out positions, I can't drag the clip from the canvas to the timeline (trying to do so moves the video within the frame). Instead I have to drag the clip from the list to the timeline. Is this because of the way in which I created the subclip or does it have to do with the standard DV format vs. HDV that I usually use?
Thanks in advance for any help.

Tom has step by step here:
http://www.fcpbook.com/Video5.html
The subclips should behave like a regular clip.
If you experience flakey behaviour with FCE, trash the FCE Preferences.
When I view the subclip in the canvas and mark in and out positions
I hope you mean the Viewer where you mark in/out points otherwisw it won't work as expected.
Mark an in/out in the Viewer then drag the Viewer clip onto the Insert Canvas Overlay or Overwrite depending on the type of edit required.
Al

HELP! Safari will not work with "standard user" via airport card in my mini

Hello, I am successfully connecting with safari via an airport card in my mini mac. I am the administrator of the osX. However no other "user" can connect to the internet via safari. What am I doing wrong? When a standard user clicks on the "internet connect icon" the 2wire224 is an aption but no internet page will connect. Help!!!!!!! ISP has gone as far as they can in helping me.

Hello, I have tried to solve via internet connect - no help. All of a sudden, since I made the post, the 2wire24 selection is now requiring a keychain password to get on. And sometimes my wep password. I know all these but don't want to have to use them and or give them out to my standard users. Any other suggestions or help?

Correct password doesn't work with Mail interface, but works with web interface.

Mail claims "The POP server “mail.nykayak.com” rejected the password for user “valerie”, yet when I log in through the web interface the password works. All other accounts work. Has anyone experienced this and found a solution?

Mackie, Welcome to the discussion area!
On your iMac G3, go to the AirPort menu and select the network name. It will prompt you automatically for the correct type of wireless encryption password.
I wouldn't trust selecting an option from Internet Connect.
In AirPort Admin Utility, what type of wireless encryption have you enabled? If it is WPA2 the iMac G3 won't be able to connect.
Also ensure that your AirPort Extreme base station (AEBS) is configured to work in an 802.11b compatible mode. The iMac G3 is only 802.11b.

How to work with standard forms

hi all,
when i execute the print programs for standard forms , it is not giving output?
i hv modified form MEDRUCK (ex: uploaded LOGO)
can i create a new program or modify a standard program for the form.

Hi Praveen,
If u want to change the layout of the standard form, copy the form and modify the layout. Depending on the layout, if there are any subsequent changes to be made in the print program. Then modify the copied program. We can assign this new program to the copied form using NACE.
Secondly, we cant execute a print program. In case u want to test the layout/program for MEDRUCK, go to ME23n and check the print preview from there.
Reward points if helpful....

Does the iPod Classic work with USA SPEC interfaces

I am very intrested in purchasing a iPod Classic and a USA SPEC PA11-CHR iPod interface to connect the iPod to the factory radio in my truck. The problem is that nobody seems to know if the new iPod Classic will work with this interface, not even USA SPEC. Does anyone have any experiece with this? I have heard that the new iPod Nano's work with this interface, but not like they should. Any info on the Classic and its compatability with this interface would be greatly appreciated.

I'm currently using an integration system from NEO car audio in my Mazda 3(which I'm sure all our integration kits are some variation of the same exact unit), not a cheep upgrade either. And I'm having the same lockout issues, "connected to accessory". I somehow managed to bypass it once, and get back to the main menu, but have yet to do it since that one accidental time. The system worked PERFECT with my 60G 5th gen. Apple should have made it a little more clear that they were going to attempt to control every aspect of our lives once we purchased the new ipod. Hey look, guess since they started using PC parts they thought it would be ok to become just like Windows "you will do it our way or not at all"
I will return my 160g classic as well, and go back to my 60g Video. I may consider buying the 160 again later down the road, once Apple has stopped taking what ever drugs they are on that’s impaired their judgment to the point of stupidity. They even disabled the video out, you have to purchase their "NEW" video cable in order to hook the classic up to your tv or av system.
MORE THAN UPSET!!!
Apple get a grip! If you start down this road, you will loose the large following that has taken YEARS for you to gather. Are you sure you want to start this now?

Working with standard interface

Similar Messages

Maybe you are looking for