Working with tiff and jpeg?

1. ACR saves changes made to a raw image into the sidecar file, though what is it doing with the tiff or jpeg file that is changed? Where is this saved?
2.what features do you not have if you open tiff or jpeg in ACR? It seems to do everything the same.
Thanks.

The settings are saved as xmp metadata inside the jpeg/tiff. Note that while the settings are saved (and show up in Bridge), the settings are not actually applied until you actually process the images. So other 3rd party viewers won't see the changes. The embedded metadata is done safely and will not impact the file. The xmp metadata is also stored inside of DNG files as well. Only proprietary raw files force the use of sidecar files because ACR/Adobe treats them as read only files (it's not "safe" to write metadata in proprietary raw files since the formats are not documented).
As to limitations, since jpeg/tiff files are already rendered into a color space and gamma, those files are not "linear" and you will be limited in the amount of highlight recovery that can be done. Additionally, since the rendered files already have a white point the white balance is somewhat limited as well. Also, there are limitations to the Lens Corrections because ACR can't apply lens correction built for raw files in jpeg/tiff files. You can still use the manual corrections...

Similar Messages

Working with RAW and JPEG Images in Aperture (2 part question)

I just edited a RAW file and stamped the adjustments into the JPEG file. Then applied some RAW fine tuning to the RAW image. For the life of me I cannot tell the difference between the two images and I will not blow up beyond 8 x 10. So is shooting RAW a waste?
Secondly do JPEG degrade every time you open and close them or only if you open them, edit them and then close?
Thanks

Working on JPGs in Aperture does not degrade JPGs at all because the original JPGs are not ever re-saved, and therefore are not ever re-compressed.
As for shooting RAW vs. JPG - I usually shoot both at the same time using RAW+JPG, I have never ever been in a position where I shot RAW and wished I had shot JPG. I have been in positions where I shot JPG that I wish I had shot RAW.
[Why shoot RAW|http://photo.rwboyer.com/2009/01/why-shoot-raw>
RB

Elements 10 canvas not working with tiff images; works fine with jpegs. What to do?

Elements 10 canvas not working with tiff images; works fine with jpegs. What to do? It does not allow me to add a colored canvas, only a blank canvas.

Perhaps some of the tiffs are already layers.
In other words, since jpegs don't support layers, they all ways open with one locked background layer, but the tiff format does
support layers so the tiffs don't have to have a locked background layer and can already be a regular layer that supports transparency.
For the tiffs you could add a new color fill layer below and use the color you want the enlarged canvas to be.
On pse 10 look at the bottom of the layers panel for the new adjustment of fill layer icon

Trouble importing tiffs and jpegs

I was importing an image into lightroom in 3 different formats: psd, tiff, and jpeg. I got an error message with the tiff and jpeg stating that the image was already in lightroom. The images all had the same name but were different formats. Does lightroom not recognize that the formats are different and therefore different images, or can it only import 1 format of an image? thanks

LR See's the Others as side cars to the one imported. You can put each type into another folder/directory and they will import. The you can put them all in the same folder from with LR.
This behavior is likely to change, because some many have complained about it. It was not supposed to happen between these three file types, but was impimented for RAW +JPEG pairs, as the JPEG was cnsidered a 'preview' sidecar and JPEGs based on prcessing the RAW could be easily exported at anytime. After much bru-ah-ah, this appears that it will change.
Don
Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.9 & Win XP, Pentax *ist D
http://donricklin.blogspot.com/

FaceTime no longer working with Yosemite and IOS 8.1

I have used FaceTime flawlessly for some time with no issue.
After I upgraded to Yosemite on my MacBookAir and IOS8.1 on 5S and iPad air, I've had a problem connecting.
When I get a call, all the devices ring (as they should) but it will not connect on the first device I pick up on. It says connecting
but all the other devices keep ringing and finally it says I have a missed call. The connection does not happen. If I turn off
all devices except one, it will work...... do we have a bug here??

Thank you for responding to my issue. I spent the better part of two hours trying to get this to work. Bluetooth is enabled on all devices. Each computer is set in Preferences/General to allow Handoff. All computers and iPhones are on the same WiFi network. I toggled all of the major settings off and on. Rebooted each of my computers several times. I finally conceded defeat. Then my daughter asked to have a try at it. She worked on the first MBP for about thirty minutes and informed me that she had gotten continuity to work. And indeed, on her MBP late 2012 she is able to use the continuity features in both directions between her computer and her iPhone 6. But it only works with Mail and Safari. I asked how she accomplished this feat. She said she turned off "everything" on her computer and iPhone (WiFi, Bluetooth, "Allow handoff" under Preferences/General) and then rebooted both the iPhone and the computer. She then turned everything back on. This worked for her. So we tried the same thing on my MBP and iPhone 6. Now continuity works partially. Email activity is mirrored on both the MBP and the iPhone regardless of which device initiates the continuity activity. But Safari activity on the computer is mirrored on the iPhone but not in the opposite direction. There is no continuity function for Pages in either direction. The telephone connectivity works fine on all of my devices– 3 MBPs, Mac Pro, iPad Air, 2nd gen iPad and 3rd gen iPad.

Looking for an app that works with Mac and iPhone that will set calendar reminders of birthdays in contacts.

Looking for an app that works with Mac and iPhone that will set calendar reminders of birthdays in contacts.

Hi ron1098,
Try my application Dates to iCal. it runs on the Mac, but you can sync the calendar to your iOS device.
See more about Dates to iCal here. It is £4 shareware with a 2 week demo.
Best wishes
John M
As I sell software on my site and ask for donations, the Apple Support Communities Use Agreement requires that I state that I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Handoff not working with Yosemite and iOS 8

I have three Macbook Pros in my household. Two are mid 2012 models and the other a late 2012 model. Each is supposed to support the handoff feature of Yosemite and ios8. Everything seems to work properly between my daughter's late 2012 MBP and her iPhone 6. But on the other two MBPs in our family the continuity feature does not work on either of them. Receiving and sending calls works fine. But the continuity does not work even though all three MBPs and all three iPhone 6 are on the same wifi network.
I've tried all the suggestions that I could find. Toggling off and on the various settings on the MBPs and the iPhones.
John

Thank you for responding to my issue. I spent the better part of two hours trying to get this to work. Bluetooth is enabled on all devices. Each computer is set in Preferences/General to allow Handoff. All computers and iPhones are on the same WiFi network. I toggled all of the major settings off and on. Rebooted each of my computers several times. I finally conceded defeat. Then my daughter asked to have a try at it. She worked on the first MBP for about thirty minutes and informed me that she had gotten continuity to work. And indeed, on her MBP late 2012 she is able to use the continuity features in both directions between her computer and her iPhone 6. But it only works with Mail and Safari. I asked how she accomplished this feat. She said she turned off "everything" on her computer and iPhone (WiFi, Bluetooth, "Allow handoff" under Preferences/General) and then rebooted both the iPhone and the computer. She then turned everything back on. This worked for her. So we tried the same thing on my MBP and iPhone 6. Now continuity works partially. Email activity is mirrored on both the MBP and the iPhone regardless of which device initiates the continuity activity. But Safari activity on the computer is mirrored on the iPhone but not in the opposite direction. There is no continuity function for Pages in either direction. The telephone connectivity works fine on all of my devices– 3 MBPs, Mac Pro, iPad Air, 2nd gen iPad and 3rd gen iPad.

I like the idea of auto back-up for my new iMac, Ipad and PC Netbook, particularly if I can access all files and data stored on any device. But I have a Conceptronic router. Will Time Capsule work with this and how?

I like the idea of auto back-up for my new iMac, Ipad and PC Netbook, particularly if I can access all files and data stored on any device. But I have a Conceptronic router.
1. Will Time Capsule work with this and how?
2. Can my printer USB be plugged in and then shared between the devices?
3. Can I create a network and how?
4. What happend when a visitor logs onto my existing wireless router?
I'm new to Macs (well a returning user having started with Mac Plus!!) and not very technical. Any help / advice will be much appreciated.
Ray

The key to what you seem to want to do is to be able to get Apple's Time Capsule router to "join" the network that your Conceptronic router. I believe that works with some third-party routers, but I've never seen a list of those that work in such a configuration and I have no experience with Conceptronic equipment.
You might be better off with a Network-Attached Storage (NAS) device instead of a Time Capsule.

I am considering buying an iPad 3. I have an iMac with OSX 10.6.8. On the iMac I have many photos and work with iPhoto and Photoshop Elements on the computer. Can I interchange or transfer photos and other work from the iMac to the iPad? How?

I am considering buying an iPad 3. I have an iMac with OSX 10.6.8. On the iMac I have many photos and work with iPhoto and Photoshop Elements on the computer. Can I interchange or transfer photos and other work from the iMac to the iPad? How?

velma Monreal wrote:
I am considering buying an iPad 3. I have an iMac with OSX 10.6.8. On the iMac I have many photos and work with iPhoto and Photoshop Elements on the computer. Can I interchange or transfer photos and other work from the iMac to the iPad? How?
Yes you can. In iPhoto create a Album with the photos you want in it. You can drag them from your Events folder. In iTunes with your iPad connected go to Photos by cliking on your iPad. You can then select the album or events you want.

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click w

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks.

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks.

Internal Microphone not working with Quicktime and some other apps, yet it does for Skype.

Internal Microphone not working with Quicktime and some other apps, yet it does for Skype.
Microphone works fine with Quictime on another mac, so I do know how to use it. The one where it is not working (A) had an external microphone and camera attached earlier, and indeed it does work with that external microphone, but not with the internal microphone selected; and (B) had RealPlayer installed previously.
Any suggestions, please?

Hi,
Download Audio driver from here.
Intructions how to install it in Vista/Win7.
Extract this driver with Winrar.
Open Device manager and expand the Sound, video and game controllers section.
Right click on Either the High Definition Audio Device if you have the generic Microsoft drivers, or the Conexant High Definition SmartAudio 221 if you have older Conexant drivers and choose "Update Driver Software..."
Click Browse my computer for driver software, then click "Let me pick from a list of device drivers on my computer"
Click "Have Disk..." then Browse to the folder where the drivers were extracted .......\V64 for 64-bit Vista/Win7. Click OK.
Select one of the "Conexant High Definition SmartAudio 221" models in the list, there will be multiple identical entries.
Click Next, and you're done.
I'm not sure which one from the list will work for You.
This drivers weren't test. So if You will try them and it will work for You let us now about.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Device not working with Log and Transfer in FCP

I am trying to get some footage off my camera into final cut pro, but Final Cut Pro does not recognise my device when I try to use Log & Transfer
The camera is question is a Cannon Legria FS20, here is a link
http://www.canon.co.uk/ForHome/Product_Finder/Camcorders/flash_memory/LEGRIAFS20/
I have looked around but can't seem to find any plug-ins to get it to work with Final Cut Pro, does anyone know any way I can get it to work with Log and Transfer
Upon inspecting the hard drive, it saves video files in .MOD format with an .MOI file (which i assume is a metadata file
How can I get it so that my device works with log and transfer?
Thanks

Hi -
I did a little Google searching for information on your camera and it appears that it is a Standard Definition Camera that records in the MPEG-2 format.
Log and Transfer only works with High Definition material.
You will need to convert your video clips into a format that will work with FCP.
I know nothing about working in PAL, but you want to download an free application called MPEG Streamclip from
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
This application will convert your MPEG-2 files into a format that you can use directly in FCP.
Once you have converted the files to Apple DV-PAL, with the correct frame rate (25fps?) and field dominance you can either simply drag the converted files into FCP or import them using File > Import.
Hope this helps.
MtD

HT4437 The airplay on my i pad works with music and pictures but I cannot get it to work with safari and mirroring. Does anyone know what I could be doing wrong? Thanks!!

The airplay on my i pad works with music and pictures but I cannot get it to work with safari and mirroring. Can someone help me to get things working? Thanks!

As an IT person, I can put my hands up to the same difficulty. Then on double clicking on Home button, find AirTV symbol amongst Music control
Solved my problem having spent hours looking for a complicated answer. Well done Apple for hiding it so well.
Brian

Dear Apple's people, please note that "Lightning to 30 pin Adapter" don't work with iPhone5 and iPhone5s "Base Dock" !!!!

Dear Apple's people, please note that "Lightning to 30 pin Adapter" don't work with iPhone5 and iPhone5s "Base Dock" !!!!

Ho comprato un adattatore originale Apple "lighitning to 30 pin adapter" per poter usare i mei vecchi cavi dell'iPhone4 con il nuovo iPhone5.
Se collego l'adattatore (con il vecchio cavo delliPhone4) direttamente all'iPhone5 , tutto funziona.
Ma se collego l'adattatore (con il vecchio cavo delliPhone4) all'iPhone5 tramite la "base dock" , l'adattatore non viene riconosciuto e non funziona.
Pensando che l'adattatore fosse rotto, ho riprovato con altri identici adattatori originali, ma il risultatato è lo stesso.
Quindi penso che potrebbe essere un errore di progettazione della base dock che supporta unicamente la connessione diretta tramite un cavo lighning e non supporta la connessione se in mezzo c'è l'adattatore !!

I want to ask that i have passed my 10th and i am doing diploma in Mechanical Engineering. So i want to work with apple and wants to lean more from them. So how i can this company as a studying student?

I want to ask that i have passed my 10th and i am doing diploma in Mechanical Engineering. So i want to work with apple and wants to lean more from them. So how i can this company as a studying student?

[http://support.mozilla.com/en-US/kb/Managing+file+types]

Working with tiff and jpeg?

Similar Messages

Maybe you are looking for