Working with TimeZone variables in UCCx script

Hi Team
I'm wondering if you guys could help me to find out the best way to work with TZ variables in UCCx script.
Because of different countries customer has a branches, I need to setup different TimeZones for each country handled by the same centralized UCCx.
In this post they use Java to work with TZ, however, but I prefer another way to work with TZ variables:
https://supportforums.cisco.com/discussion/11851751/how-make-uccx-holiday-script-timezone-aware
My idea is to work with Time Zone variables in the script, so what I did was to create different TZ variables and each one of the them assigned the proper timezone based on the country, so depending of the Trigger involved (DNIS), I can find witch country this call came from and give the right timezone.
The problem I have is that at the time I want to add or subtract two variables of TZ, I got an error because of the syntax. I've been trying different options, but until now, no luck.
Would you mind you guys who had been working on this let me know what is the right syntax to add or subtract TimeZone variables un UCCx?
Thanking you in advance
Martin

Hi
I've been working on TZ's recently... see this post:
https://supportforums.cisco.com/discussion/12474756/how-check-daylight-saving-within-uccx-script
My approach in the scripts was that basically I allow the department to set their opening hours in the timezone of their choice.
They have a management web page served from CCX that accepts start/end times each day, and a timezone. That all gets stored in XML.
In the script, based on that information I get the current time in whatever timezone is set, and compare that to the XML open/close times.
Similarly for holidays, I get the current date/time in the holiday TZ and compare the holidays to that.
Aaron

Similar Messages

  • I want to work with shared variables. How can I add a remote pc?

    I did an aplication to work with shared variables, but I do not know how add a remote pc. I tried make it in Variable Manager, but Labview showed a error message: "Cannot Connect to Target xxxxxxxx". What can I do?

    Message Edité par JeromeL le 08-28-2007 06:44 AM
    Jérôme LIBBRECHT

  • Working with array variables defined in the BPM process

    Hello,
    I have created an array variable in my process. This array was created based on a custom type that contains 2 strings variables.
    How can I set/get and add new items to this array variable using java code?
    The only thing I know is that, if this was a simple variable I would do something like this:
    DCBindingContainer bc = (DCBindingContainer)FacesContext.getCurrentInstance().getApplication().evaluateExpressionGet(FacesContext.getCurrentInstance(), "#{bindings}", BindingContainer.class);
    JUCtrlAttrsBinding dc = (JUCtrlAttrsBinding) bc.findNamedObject("myVar");
    dc.setInputValue("theValue".toString());
    thank you
    fwu

    Hi
    I've been working on TZ's recently... see this post:
    https://supportforums.cisco.com/discussion/12474756/how-check-daylight-saving-within-uccx-script
    My approach in the scripts was that basically I allow the department to set their opening hours in the timezone of their choice.
    They have a management web page served from CCX that accepts start/end times each day, and a timezone. That all gets stored in XML.
    In the script, based on that information I get the current time in whatever timezone is set, and compare that to the XML open/close times.
    Similarly for holidays, I get the current date/time in the holiday TZ and compare the holidays to that.
    Aaron

  • Working with DIAdem REPORT in DIAdem SCRIPT

    Hello,
    I am working with DIAdem 9.1 Advanced. I would like to create a report with a 2D graph object containing one curve (X,Y1) or (X,Y2). The user has to choose between (X,Y1) and (X,Y2) via a dialog box. I want to generate this report with a VBS script without loading a predefined TDR report.
    I tried the following sample code:
    '1. Load "Example.CSV" from the DIAdem DEMO folder
    '2. Load a new blank report
    Call GraphObjNew("2D-Axis","MyGraph") 'Creates a new 2D-graph object called -MyGraph- in the report
    Call GraphObjOpen("MyGraph")      
      D2AXISSYSTEM     ="one system"
    ' The user selects which channels he wants to plot via a dialog box
    ' If the channel "Sine" is selected, we need to create a new curve on the 2D-graph
    ' Do I need to create a new object for the curve? Which type of object ?
      Call GRAPHObjOpen("2DObj1_Curve1") ' ERROR -Object 2DObj1_Curve1 unknown or not open-
        D2CCHNX          ="[1]/Time"
        D2CCHNY          ="[1]/Sine"
      Call GRAPHObjClose("2DObj1_Curve1")
    Call GraphObjClose("MyGraph") 
    Call PicUpdate
    Is it possible in DIAdem to create dynamically a 2D-graph when we do not know before which channels will be plot?
    Thanks in advance for your answer.
    Matthieu G.
    Eurilogic, France

    Hello Matthieu
    Variable: ObjType
    The terms 2D-curve and 3D-curve are valid keywords for new 2D-curves and 3D-curves and the enumeration terms of the ReportObjType variable for all other objects.
    I attached some topic of the DIAdem 10 help that descibe some variables that correspond to this topic.
    The following script create a 2d-Axis system an a new curve and defines the data for this curve
    Call GraphObjNew("2D-Axis","MyGraph") 'Creates a new 2D-graph object called -MyGraph- in the report
    Call GraphObjOpen("MyGraph")      
      D2AXISSYSTEM     ="one system"
      Call GraphObjNew("2D-curve","MyCurve") 'Creates a new 2D-Curve object called -MyCurve- in the report
      Call GraphObjOpen("MyCurve")
        D2CCHNXNAME      ="[1]/Time"
        D2CCHNYNAME      ="[1]/Sine"
      Call GraphObjClose("MyCurve")
    Call GraphObjClose("MyGraph") 
    Call Picupdate()
    Hope this helps
    Winfried
    Message Edited by winner on 02-27-2006 11:54 AM
    Attachments:
    report.zip ‏18 KB

  • Unable  to work with Workflow Variable through SPML launchProcess Request ?

    Hi,
    I am trying to work with launch process request, which worked well with no error message when I am just using the workflow call through SPML "launchProcess Request " call. But when trying to use any workflow variable then getting exceptions. I don't undertsand about the error message. Is this trying to convert the variable in SIM variable.
    <spml:extendedResponse xmlns:spml='urn:oasis:names:tc:SPML:1:0' xmlns:dsml='urn:oasis:names:tc:DSML:2:0:core' result='urn:oasis:names:tc:SPML:1:0#failure'>
    <spml:operationalAttributes>
    <dsml:attr name='errorMessages'>
    <dsml:value>Couldn't find method get4() in class java.lang.String</dsml:value>
    <dsml:value>java.lang.String.get4()</dsml:value>
    <dsml:value>Missing view id.</dsml:value>
    <dsml:value>Missing view id.</dsml:value>
    <dsml:value>Unable to checkin view, missing view id</dsml:value>
    <dsml:value>XPRESS <get> exception:</dsml:value>
    <dsml:value>Couldn't find method get3() in class java.lang.String</dsml:value>
    <dsml:value>java.lang.String.get3()</dsml:value>
    <dsml:value>Missing view id.</dsml:value>
    <dsml:value>Missing view id.</dsml:value>
    <dsml:value>Unable to checkin view, missing view id</dsml:value>
    <dsml:value>XPRESS <get> exception:</dsml:value>
    <dsml:value>Couldn't find method get2() in class java.lang.String</dsml:value>
    <dsml:value>java.lang.String.get2()</dsml:value>
    <dsml:value>Missing view id.</dsml:value>
    <dsml:value>Missing view id.</dsml:value>
    <dsml:value>Unable to checkin view, missing view id</dsml:value>
    <dsml:value>XPRESS <get> exception:</dsml:value>
    <dsml:value>Couldn't find method get1() in class java.lang.String</dsml:value>
    <dsml:value>java.lang.String.get1()</dsml:value>
    <dsml:value>Missing view id.</dsml:value>
    <dsml:value>Missing view id.</dsml:value>
    <dsml:value>Unable to checkin view, missing view id</dsml:value>
    <dsml:value>XPRESS <get> exception:</dsml:value>
    <dsml:value>Couldn't find method get0() in class java.lang.String</dsml:value>
    <dsml:value>java.lang.String.get0()</dsml:value>
    <dsml:value>Missing view id.</dsml:value>
    <dsml:value>Missing view id.</dsml:value>
    <dsml:value>Unable to checkin view, missing view id</dsml:value>
    </dsml:attr>
    Below is the code I am using .
    LighthouseClient client = new LighthouseClient();
         client.setUser("configurator");
         client.setPassword("configurator");
         String url = "http://xyz:8080/idm/servlet/rpcrouter2";
    client.setUrl(url);
         ArrayList mslist = new ArrayList();
         idlist.add("12345");
         System.out.println("UserList :- "+idlist);
         ExtendedRequest extReq = new ExtendedRequest();
         extReq.setOperationIdentifier("launchProcess");
         extReq.setAttribute("process", "TEST_WF");
         extReq.setAttribute("idList",idlist); //workflow Global variable
         ExtendedResponse res = (ExtendedResponse)client.request(extReq);
         if (res.getResult() .equals(ExtendedResponse.RESULT_SUCCESS))
         System.out.println("Workflow was successfully executed");
              } catch (Exception e) {System.out.println("Error : " + e.getMessage());}
    Please suggest me if I am using anything wrong. Its urgent... it halted my work.
    Regards,
    vinash.

    hi,
    in java code you set variable:
    extReq.setAttribute("my_email", "[email protected]");in express code of your workflow (you also can see it in your debugger if you set a breakpoint a the beginning of your workflow):
    <ref>my_email</ref>

  • How to  define and work with bind-variables without the dialog-box ?

    I want to select different tables with the same bind_variables,
    but do want not fill the bind-variables-dialogbox
    everytime I use the select statements
    because I could simple edit and bind this bind-variables once
    at the first select.
    select col1, col2 into :bind1, :bind2 from mybasictable_10 where col3 = 'ABCD':
    select * from mytable_b where b1 = :bind1 and b2 = :bind2 ;
    select * from mytable_c where c1 = :bind1 and c2 = :bind2 ;
    select * from mytable_d where d1 = :bind1 and d2 = :bind2 ;
    select * from mytable_e where e1 = :bind1 and e2 = :bind2 ;
    it doesn't work and I didn't find that in help,
    how does it work in sql-developer ?
    regards

    david,
    back to the root of my question:
    I do use an 10 years old low-end sql / plsql-tool where I can simple and fast do sql-things like that:
    select col1, col2 into :bind1, :bind2 from mybasictable_10 where col3 = 'for_example_ABCD':
    select * from mytable_b where b1 = :bind1 and b2 = :bind2 ;
    select * from mytable_c where c1 = :bind1 and c2 = :bind2 ;
    select * from mytable_d where d1 = :bind1 and d2 = :bind2 ;
    select * from mytable_e where e1 = :bind1 and e2 = :bind2 ;
    I would like to use oracles SQL-Developer instead of this 'old' tool,
    and want to use my 'old' sql / plsql scripts
    but the SQL-Developer in this matter seems is to much complicate to use,
    I can do complex and big things with sql-dev,
    but not simple using bind-variables ;-)( .

  • Creating a range with Substitution Variables for Report Script

    Is it possible to create a range with substituion varables for use in a report script. For example instead of listing "Jan" "Feb" "Mar" "Apr" in the report script can I use a sub varaible like Jan:Apr that will list them all out?

    while I have not had luck with ranges in report scripts, others have. You could have a substitution variable the is "Jun" "Jul " "Aug" or whatever you want the members to be. and it will replace jusr fine

  • Does "Allow log on locally" work with environment variables?

    This is merely out of curiosity and just because I'm doing some conceptual gambling.
    I'd like to create a GPO having the Allow log on locally set to something like the following list:
    %OWNER%
    BUILTIN\Administrators
    The concept behind this is to prepare the system during OS installation with a value to the OWNER environment variable to allow only the specified user account (apart from the Administrators group, of course) to log on to the system without A) having to
    configure this setting locally on the client and B) having a great range of different GPOs to handle all the user/computer combinations.
    My questions are:
    Does this work at all?
    If it works, what do I need to provide as a value?
    I've already tried to set <user name>, <domain name>\<user name> and
    <user name>@<FQDN> but none of those seem to work.

    Hi,
    Glad to see your problem resolved. Hope your experience could helps other who had same cofusion.
    Roger Lu
    TechNet Community Support

  • Working with slide notes as audio script

    In Captivate v4 if you had more than a few lines of notes that you were to use as your script, you could "detach" the notes and expand the screen prior to starting your audio recording in order to see on one page all notes from which you based your audio.
    I have yet to start any major recording in Captivate v5.5, but from what I see so far - the above option does not exist. It looks as if you get a scroll bar which you must use to see your script once you get to the bottom of the initial available notes screen.
    Are there any workarounds ?
    I would much prefer to see the full script from the start and not have to scroll down during my recording - with the added risk of my mike picking up the mouse clicks.
    Noel

    If you want to use the Slide Notes panel detached, you can just grab it by the tab and drag it off as a floating panel.  However, when you open the Slide Audio dialog, you'll find that the Slide Notes panel cannot be made to sit on top of it.
    My preference is to dock the Slide Notes on the right side of the screen, and just sit the Slide Audio to the left of it so that I can read my voiceover script as well as control the Slide recording.

  • Working with JSON variable

    Hi All,
    I hope someone can give me a steer in the right direction.
    I'm trying and failing to import a variable via an API into Flash via actionscript.
    The API is on some hardware that is sat on my network so I'm using a local IP address in my request.
    Basically if I type the following string into the address bar of Firefox it returns the info I want in the browser window:
    192.168.2.222/rApi/location/100/sensorStats/temperature/instant/
    Currently it returns - 19.87
    In its simplest terms I just want to use Flash to create a dynamic text box that will Display the current temperature.
    I've read so many tutorials and reference materials and so far I've not managed to get anything to do what I want. Most of them are much more complicated than I need.
    Any help would be really appreciated.

    Thanks for the assistance.
    Basically my code works for a web based URL but when I point it to the hardware on the internal network I get the following error:
    Error opening URL 'https://192.168.2.222/rApi/location/100/sensorStats/ceilingTemperature/instant/'
    Error #2044: Unhandled ioError:. text=Error #2032: Stream Error. URL: https://192.168.2.222/rApi/location/100/sensorStats/ceilingTemperature/instant/
              at JSONAPITest_fla::MainTimeline/frame1()

  • Seconds_between doesn't work with variables in SQLScript

    There is a sample procedure:
    create procedure testproc
    language SQLSCRIPT
    as
    l_curtime timestamp;
    l_timedelta integer;
    begin
      select systimestamp into l_curtime from dual;
      select seconds_between(:l_curtime, systimestamp) into l_timedelta from dual;
    end;
    It should return seconds between 2 timestamp values.
    The code returns an error:
    Could not execute 'create procedure testproc language SQLSCRIPT as l_curtime timestamp; l_timedelta integer; begin ...'
    SAP DBTech JDBC: (at 160): inconsistent datatype: line 8 col 10 (at pos 160)
    With «time» and «date» datatypes that's the same. So, seconds_between doesn't work with SQLScript variable (in this example, l_curtime). Is it a normal behaviour or supposed to be a bug?

    Hello,
    I can confirm same behavior - using variable inside seconds_between function leads to error. If you put there static string it is ok.
    Of course you can always create "dummy" table (having 1 row with 1 column) where you will store the result of first call and then you will reference in second. But of course it is not that clean and it will be slower (especially if called many times).
    But I would suggest to wait few more days - there should be SP03 released and everything can be different.
    Tomas

  • [SOLVED] SQLite not working with PHP

    For reasons unknown, I cannot get PHP to work properly with SQLite. I have uncommented the "extension=sqlite.so" in /etc/php/php.ini, ensured that PHP's configuration was being loaded from said file, and made sure PHP was working fine with my server of choice (lighttpd). Unfortunately, it doesn't seem to work, as evidenced by
    Fatal error: Call to undefined function sqlite_open() in test.php on line x
    Which is what PHP spits at me. I've checked lighty's logs and nothing's wrong. PHP's set to send to syslog, so I'm not sure where I could check on that. Here is a quick look at PHP's setup.
    My /etc/php/php.ini:
    [PHP]
    ; About php.ini ;
    ; This file controls many aspects of PHP's behavior. In order for PHP to
    ; read it, it must be named 'php.ini'. PHP looks for it in the current
    ; working directory, in the path designated by the environment variable
    ; PHPRC, and in the path that was defined in compile time (in that order).
    ; The path in which the php.ini file is looked for can be overridden using
    ; the -c argument in command line mode.
    ; The syntax of the file is extremely simple. Whitespace and Lines
    ; beginning with a semicolon are silently ignored (as you probably guessed).
    ; Section headers (e.g. [Foo]) are also silently ignored, even though
    ; they might mean something in the future.
    ; Directives are specified using the following syntax:
    ; directive = value
    ; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
    ; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
    ; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
    ; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
    ; Expressions in the INI file are limited to bitwise operators and parentheses:
    ; | bitwise OR
    ; & bitwise AND
    ; ~ bitwise NOT
    ; ! boolean NOT
    ; Boolean flags can be turned on using the values 1, On, True or Yes.
    ; They can be turned off using the values 0, Off, False or No.
    ; An empty string can be denoted by simply not writing anything after the equal
    ; sign, or by using the None keyword:
    ; foo = ; sets foo to an empty string
    ; foo = none ; sets foo to an empty string
    ; foo = "none" ; sets foo to the string 'none'
    ; If you use constants in your value, and these constants belong to a
    ; dynamically loaded extension (either a PHP extension or a Zend extension),
    ; you may only use these constants *after* the line that loads the extension.
    ; About this file ;
    ; This is the recommended, PHP 5-style version of the php.ini-dist file. It
    ; sets some non standard settings, that make PHP more efficient, more secure,
    ; and encourage cleaner coding.
    ; The price is that with these settings, PHP may be incompatible with some
    ; applications, and sometimes, more difficult to develop with. Using this
    ; file is warmly recommended for production sites. As all of the changes from
    ; the standard settings are thoroughly documented, you can go over each one,
    ; and decide whether you want to use it or not.
    ; For general information about the php.ini file, please consult the php.ini-dist
    ; file, included in your PHP distribution.
    ; This file is different from the php.ini-dist file in the fact that it features
    ; different values for several directives, in order to improve performance, while
    ; possibly breaking compatibility with the standard out-of-the-box behavior of
    ; PHP. Please make sure you read what's different, and modify your scripts
    ; accordingly, if you decide to use this file instead.
    ; - register_long_arrays = Off [Performance]
    ; Disables registration of the older (and deprecated) long predefined array
    ; variables ($HTTP_*_VARS). Instead, use the superglobals that were
    ; introduced in PHP 4.1.0
    ; - display_errors = Off [Security]
    ; With this directive set to off, errors that occur during the execution of
    ; scripts will no longer be displayed as a part of the script output, and thus,
    ; will no longer be exposed to remote users. With some errors, the error message
    ; content may expose information about your script, web server, or database
    ; server that may be exploitable for hacking. Production sites should have this
    ; directive set to off.
    ; - log_errors = On [Security]
    ; This directive complements the above one. Any errors that occur during the
    ; execution of your script will be logged (typically, to your server's error log,
    ; but can be configured in several ways). Along with setting display_errors to off,
    ; this setup gives you the ability to fully understand what may have gone wrong,
    ; without exposing any sensitive information to remote users.
    ; - output_buffering = 4096 [Performance]
    ; Set a 4KB output buffer. Enabling output buffering typically results in less
    ; writes, and sometimes less packets sent on the wire, which can often lead to
    ; better performance. The gain this directive actually yields greatly depends
    ; on which Web server you're working with, and what kind of scripts you're using.
    ; - register_argc_argv = Off [Performance]
    ; Disables registration of the somewhat redundant $argv and $argc global
    ; variables.
    ; - magic_quotes_gpc = Off [Performance]
    ; Input data is no longer escaped with slashes so that it can be sent into
    ; SQL databases without further manipulation. Instead, you should use the
    ; database vendor specific escape string function on each input element you
    ; wish to send to a database.
    ; - variables_order = "GPCS" [Performance]
    ; The environment variables are not hashed into the $_ENV. To access
    ; environment variables, you can use getenv() instead.
    ; - error_reporting = E_ALL [Code Cleanliness, Security(?)]
    ; By default, PHP suppresses errors of type E_NOTICE. These error messages
    ; are emitted for non-critical errors, but that could be a symptom of a bigger
    ; problem. Most notably, this will cause error messages about the use
    ; of uninitialized variables to be displayed.
    ; - allow_call_time_pass_reference = Off [Code cleanliness]
    ; It's not possible to decide to force a variable to be passed by reference
    ; when calling a function. The PHP 4 style to do this is by making the
    ; function require the relevant argument by reference.
    ; - short_open_tag = Off [Portability]
    ; Using short tags is discouraged when developing code meant for redistribution
    ; since short tags may not be supported on the target server.
    ; Language Options ;
    ; Enable the PHP scripting language engine under Apache.
    engine = On
    ; Enable compatibility mode with Zend Engine 1 (PHP 4.x)
    zend.ze1_compatibility_mode = Off
    ; Allow the <? tag. Otherwise, only <?php and <script> tags are recognized.
    ; NOTE: Using short tags should be avoided when developing applications or
    ; libraries that are meant for redistribution, or deployment on PHP
    ; servers which are not under your control, because short tags may not
    ; be supported on the target server. For portable, redistributable code,
    ; be sure not to use short tags.
    short_open_tag = Off
    ; Allow ASP-style <% %> tags.
    asp_tags = Off
    ; The number of significant digits displayed in floating point numbers.
    precision = 14
    ; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
    y2k_compliance = On
    ; Output buffering allows you to send header lines (including cookies) even
    ; after you send body content, at the price of slowing PHP's output layer a
    ; bit. You can enable output buffering during runtime by calling the output
    ; buffering functions. You can also enable output buffering for all files by
    ; setting this directive to On. If you wish to limit the size of the buffer
    ; to a certain size - you can use a maximum number of bytes instead of 'On', as
    ; a value for this directive (e.g., output_buffering=4096).
    output_buffering = 4096
    ; You can redirect all of the output of your scripts to a function. For
    ; example, if you set output_handler to "mb_output_handler", character
    ; encoding will be transparently converted to the specified encoding.
    ; Setting any output handler automatically turns on output buffering.
    ; Note: People who wrote portable scripts should not depend on this ini
    ; directive. Instead, explicitly set the output handler using ob_start().
    ; Using this ini directive may cause problems unless you know what script
    ; is doing.
    ; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
    ; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
    ; Note: output_handler must be empty if this is set 'On' !!!!
    ; Instead you must use zlib.output_handler.
    ;output_handler =
    ; Transparent output compression using the zlib library
    ; Valid values for this option are 'off', 'on', or a specific buffer size
    ; to be used for compression (default is 4KB)
    ; Note: Resulting chunk size may vary due to nature of compression. PHP
    ; outputs chunks that are few hundreds bytes each as a result of
    ; compression. If you prefer a larger chunk size for better
    ; performance, enable output_buffering in addition.
    ; Note: You need to use zlib.output_handler instead of the standard
    ; output_handler, or otherwise the output will be corrupted.
    zlib.output_compression = Off
    ;zlib.output_compression_level = -1
    ; You cannot specify additional output handlers if zlib.output_compression
    ; is activated here. This setting does the same as output_handler but in
    ; a different order.
    ;zlib.output_handler =
    ; Implicit flush tells PHP to tell the output layer to flush itself
    ; automatically after every output block. This is equivalent to calling the
    ; PHP function flush() after each and every call to print() or echo() and each
    ; and every HTML block. Turning this option on has serious performance
    ; implications and is generally recommended for debugging purposes only.
    implicit_flush = Off
    ; The unserialize callback function will be called (with the undefined class'
    ; name as parameter), if the unserializer finds an undefined class
    ; which should be instantiated.
    ; A warning appears if the specified function is not defined, or if the
    ; function doesn't include/implement the missing class.
    ; So only set this entry, if you really want to implement such a
    ; callback-function.
    unserialize_callback_func=
    ; When floats & doubles are serialized store serialize_precision significant
    ; digits after the floating point. The default value ensures that when floats
    ; are decoded with unserialize, the data will remain the same.
    serialize_precision = 100
    ; Whether to enable the ability to force arguments to be passed by reference
    ; at function call time. This method is deprecated and is likely to be
    ; unsupported in future versions of PHP/Zend. The encouraged method of
    ; specifying which arguments should be passed by reference is in the function
    ; declaration. You're encouraged to try and turn this option Off and make
    ; sure your scripts work properly with it in order to ensure they will work
    ; with future versions of the language (you will receive a warning each time
    ; you use this feature, and the argument will be passed by value instead of by
    ; reference).
    allow_call_time_pass_reference = Off
    ; Safe Mode
    safe_mode = Off
    ; By default, Safe Mode does a UID compare check when
    ; opening files. If you want to relax this to a GID compare,
    ; then turn on safe_mode_gid.
    safe_mode_gid = Off
    ; When safe_mode is on, UID/GID checks are bypassed when
    ; including files from this directory and its subdirectories.
    ; (directory must also be in include_path or full path must
    ; be used when including)
    safe_mode_include_dir =
    ; When safe_mode is on, only executables located in the safe_mode_exec_dir
    ; will be allowed to be executed via the exec family of functions.
    safe_mode_exec_dir =
    ; Setting certain environment variables may be a potential security breach.
    ; This directive contains a comma-delimited list of prefixes. In Safe Mode,
    ; the user may only alter environment variables whose names begin with the
    ; prefixes supplied here. By default, users will only be able to set
    ; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
    ; Note: If this directive is empty, PHP will let the user modify ANY
    ; environment variable!
    safe_mode_allowed_env_vars = PHP_
    ; This directive contains a comma-delimited list of environment variables that
    ; the end user won't be able to change using putenv(). These variables will be
    ; protected even if safe_mode_allowed_env_vars is set to allow to change them.
    safe_mode_protected_env_vars = LD_LIBRARY_PATH
    ; open_basedir, if set, limits all file operations to the defined directory
    ; and below. This directive makes most sense if used in a per-directory
    ; or per-virtualhost web server configuration file. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    open_basedir = /srv/http/:/home/:/tmp/:/usr/share/pear/
    ; This directive allows you to disable certain functions for security reasons.
    ; It receives a comma-delimited list of function names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    disable_functions =
    ; This directive allows you to disable certain classes for security reasons.
    ; It receives a comma-delimited list of class names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    disable_classes =
    ; Colors for Syntax Highlighting mode. Anything that's acceptable in
    ; <span style="color: ???????"> would work.
    ;highlight.string = #DD0000
    ;highlight.comment = #FF9900
    ;highlight.keyword = #007700
    ;highlight.bg = #FFFFFF
    ;highlight.default = #0000BB
    ;highlight.html = #000000
    ; If enabled, the request will be allowed to complete even if the user aborts
    ; the request. Consider enabling it if executing long request, which may end up
    ; being interrupted by the user or a browser timing out.
    ; ignore_user_abort = On
    ; Determines the size of the realpath cache to be used by PHP. This value should
    ; be increased on systems where PHP opens many files to reflect the quantity of
    ; the file operations performed.
    ; realpath_cache_size=16k
    ; Duration of time, in seconds for which to cache realpath information for a given
    ; file or directory. For systems with rarely changing files, consider increasing this
    ; value.
    ; realpath_cache_ttl=120
    ; Misc
    ; Decides whether PHP may expose the fact that it is installed on the server
    ; (e.g. by adding its signature to the Web server header). It is no security
    ; threat in any way, but it makes it possible to determine whether you use PHP
    ; on your server or not.
    expose_php = Off
    ; Resource Limits ;
    max_execution_time = 30 ; Maximum execution time of each script, in seconds
    max_input_time = 60 ; Maximum amount of time each script may spend parsing request data
    ;max_input_nesting_level = 64 ; Maximum input variable nesting level
    memory_limit = 32M ; Maximum amount of memory a script may consume (32MB)
    ; Error handling and logging ;
    ; error_reporting is a bit-field. Or each number up to get desired error
    ; reporting level
    ; E_ALL - All errors and warnings (doesn't include E_STRICT)
    ; E_ERROR - fatal run-time errors
    ; E_RECOVERABLE_ERROR - almost fatal run-time errors
    ; E_WARNING - run-time warnings (non-fatal errors)
    ; E_PARSE - compile-time parse errors
    ; E_NOTICE - run-time notices (these are warnings which often result
    ; from a bug in your code, but it's possible that it was
    ; intentional (e.g., using an uninitialized variable and
    ; relying on the fact it's automatically initialized to an
    ; empty string)
    ; E_STRICT - run-time notices, enable to have PHP suggest changes
    ; to your code which will ensure the best interoperability
    ; and forward compatibility of your code
    ; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
    ; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
    ; initial startup
    ; E_COMPILE_ERROR - fatal compile-time errors
    ; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
    ; E_USER_ERROR - user-generated error message
    ; E_USER_WARNING - user-generated warning message
    ; E_USER_NOTICE - user-generated notice message
    ; Examples:
    ; - Show all errors, except for notices and coding standards warnings
    ;error_reporting = E_ALL & ~E_NOTICE
    ; - Show all errors, except for notices
    ;error_reporting = E_ALL & ~E_NOTICE | E_STRICT
    ; - Show only errors
    ;error_reporting = E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR
    ; - Show all errors, except coding standards warnings
    error_reporting = E_ALL
    ; Print out errors (as a part of the output). For production web sites,
    ; you're strongly encouraged to turn this feature off, and use error logging
    ; instead (see below). Keeping display_errors enabled on a production web site
    ; may reveal security information to end users, such as file paths on your Web
    ; server, your database schema or other information.
    ; possible values for display_errors:
    ; Off - Do not display any errors
    ; stderr - Display errors to STDERR (affects only CGI/CLI binaries!)
    ; On or stdout - Display errors to STDOUT (default)
    ; To output errors to STDERR with CGI/CLI:
    ;display_errors = "stderr"
    ; Default
    display_errors = On
    ; Even when display_errors is on, errors that occur during PHP's startup
    ; sequence are not displayed. It's strongly recommended to keep
    ; display_startup_errors off, except for when debugging.
    display_startup_errors = Off
    ; Log errors into a log file (server-specific log, stderr, or error_log (below))
    ; As stated above, you're strongly advised to use error logging in place of
    ; error displaying on production web sites.
    log_errors = On
    ; Set maximum length of log_errors. In error_log information about the source is
    ; added. The default is 1024 and 0 allows to not apply any maximum length at all.
    log_errors_max_len = 1024
    ; Do not log repeated messages. Repeated errors must occur in same file on same
    ; line unless ignore_repeated_source is set true.
    ignore_repeated_errors = Off
    ; Ignore source of message when ignoring repeated messages. When this setting
    ; is On you will not log errors with repeated messages from different files or
    ; source lines.
    ignore_repeated_source = Off
    ; If this parameter is set to Off, then memory leaks will not be shown (on
    ; stdout or in the log). This has only effect in a debug compile, and if
    ; error reporting includes E_WARNING in the allowed list
    report_memleaks = Off
    ;report_zend_debug = 0
    ; Store the last error/warning message in $php_errormsg (boolean).
    track_errors = Off
    ; Turn off normal error reporting and emit XML-RPC error XML
    ;xmlrpc_errors = 0
    ; An XML-RPC faultCode
    ;xmlrpc_error_number = 0
    ; Disable the inclusion of HTML tags in error messages.
    ; Note: Never use this feature for production boxes.
    ;html_errors = Off
    ; If html_errors is set On PHP produces clickable error messages that direct
    ; to a page describing the error or function causing the error in detail.
    ; You can download a copy of the PHP manual from http://www.php.net/docs.php
    ; and change docref_root to the base URL of your local copy including the
    ; leading '/'. You must also specify the file extension being used including
    ; the dot.
    ; Note: Never use this feature for production boxes.
    ;docref_root = "/phpmanual/"
    ;docref_ext = .html
    ; String to output before an error message.
    ;error_prepend_string = "<font color=#ff0000>"
    ; String to output after an error message.
    ;error_append_string = "</font>"
    ; Log errors to specified file.
    ;error_log = filename
    ; Log errors to syslog.
    error_log = syslog
    ; Data Handling ;
    ; Note - track_vars is ALWAYS enabled as of PHP 4.0.3
    ; The separator used in PHP generated URLs to separate arguments.
    ; Default is "&".
    ;arg_separator.output = "&"
    ; List of separator(s) used by PHP to parse input URLs into variables.
    ; Default is "&".
    ; NOTE: Every character in this directive is considered as separator!
    ;arg_separator.input = ";&"
    ; This directive describes the order in which PHP registers GET, POST, Cookie,
    ; Environment and Built-in variables (G, P, C, E & S respectively, often
    ; referred to as EGPCS or GPC). Registration is done from left to right, newer
    ; values override older values.
    variables_order = "GPCS"
    ; Whether or not to register the EGPCS variables as global variables. You may
    ; want to turn this off if you don't want to clutter your scripts' global scope
    ; with user data. This makes most sense when coupled with track_vars - in which
    ; case you can access all of the GPC variables through the $HTTP_*_VARS[],
    ; variables.
    ; You should do your best to write your scripts so that they do not require
    ; register_globals to be on; Using form variables as globals can easily lead
    ; to possible security problems, if the code is not very well thought of.
    register_globals = Off
    ; Whether or not to register the old-style input arrays, HTTP_GET_VARS
    ; and friends. If you're not using them, it's recommended to turn them off,
    ; for performance reasons.
    register_long_arrays = Off
    ; This directive tells PHP whether to declare the argv&argc variables (that
    ; would contain the GET information). If you don't use these variables, you
    ; should turn it off for increased performance.
    register_argc_argv = Off
    ; When enabled, the SERVER and ENV variables are created when they're first
    ; used (Just In Time) instead of when the script starts. If these variables
    ; are not used within a script, having this directive on will result in a
    ; performance gain. The PHP directives register_globals, register_long_arrays,
    ; and register_argc_argv must be disabled for this directive to have any affect.
    auto_globals_jit = On
    ; Maximum size of POST data that PHP will accept.
    post_max_size = 8M
    ; Magic quotes
    ; Magic quotes for incoming GET/POST/Cookie data.
    magic_quotes_gpc = Off
    ; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
    magic_quotes_runtime = Off
    ; Use Sybase-style magic quotes (escape ' with '' instead of \').
    magic_quotes_sybase = Off
    ; Automatically add files before or after any PHP document.
    auto_prepend_file =
    auto_append_file =
    ; As of 4.0b4, PHP always outputs a character encoding by default in
    ; the Content-type: header. To disable sending of the charset, simply
    ; set it to be empty.
    ; PHP's built-in default is text/html
    default_mimetype = "text/html"
    default_charset = "utf-8"
    ; Always populate the $HTTP_RAW_POST_DATA variable.
    ;always_populate_raw_post_data = On
    ; Paths and Directories ;
    ; UNIX: "/path1:/path2"
    include_path = ".:/usr/share/pear"
    ; The root of the PHP pages, used only if nonempty.
    ; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
    ; if you are running php as a CGI under any web server (other than IIS)
    ; see documentation for security issues. The alternate is to use the
    ; cgi.force_redirect configuration below
    doc_root =
    ; The directory under which PHP opens the script using /~username used only
    ; if nonempty.
    user_dir =
    ; Directory in which the loadable extensions (modules) reside.
    extension_dir = "/usr/lib/php/20060613/"
    ; Whether or not to enable the dl() function. The dl() function does NOT work
    ; properly in multithreaded servers, such as IIS or Zeus, and is automatically
    ; disabled on them.
    enable_dl = Off
    ; cgi.force_redirect is necessary to provide security running PHP as a CGI under
    ; most web servers. Left undefined, PHP turns this on by default. You can
    ; turn it off here AT YOUR OWN RISK
    ; **You CAN safely turn this off for IIS, in fact, you MUST.**
    ; cgi.force_redirect = 1
    ; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
    ; every request.
    ; cgi.nph = 1
    ; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
    ; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
    ; will look for to know it is OK to continue execution. Setting this variable MAY
    ; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
    ; cgi.redirect_status_env = ;
    ; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
    ; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
    ; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
    ; this to 1 will cause PHP CGI to fix it's paths to conform to the spec. A setting
    ; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
    ; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
    cgi.fix_pathinfo=1
    ; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
    ; security tokens of the calling client. This allows IIS to define the
    ; security context that the request runs under. mod_fastcgi under Apache
    ; does not currently support this feature (03/17/2002)
    ; Set to 1 if running under IIS. Default is zero.
    ; fastcgi.impersonate = 1;
    ; Disable logging through FastCGI connection
    ; fastcgi.logging = 0
    ; cgi.rfc2616_headers configuration option tells PHP what type of headers to
    ; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
    ; is supported by Apache. When this option is set to 1 PHP will send
    ; RFC2616 compliant header.
    ; Default is zero.
    ;cgi.rfc2616_headers = 0
    ; File Uploads ;
    ; Whether to allow HTTP file uploads.
    file_uploads = On
    ; Temporary directory for HTTP uploaded files (will use system default if not
    ; specified).
    ;upload_tmp_dir =
    ; Maximum allowed size for uploaded files.
    upload_max_filesize = 2M
    ; Fopen wrappers ;
    ; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
    allow_url_fopen = Off
    ; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
    allow_url_include = Off
    ; Define the anonymous ftp password (your email address)
    ;from="[email protected]"
    ; Define the User-Agent string
    ; user_agent="PHP"
    ; Default timeout for socket based streams (seconds)
    default_socket_timeout = 60
    ; Dynamic Extensions ;
    ; If you wish to have an extension loaded automatically, use the following
    ; syntax:
    ; extension=modulename.extension
    ; For example, under UNIX:
    ; extension=msql.so
    ; Note that it should be the name of the module only; no directory information
    ; needs to go here. Specify the location of the extension with the
    ; extension_dir directive above.
    ; Module Settings ;
    [Date]
    ; Defines the default timezone used by the date functions
    ;date.timezone =
    ;date.default_latitude = 31.7667
    ;date.default_longitude = 35.2333
    ;date.sunrise_zenith = 90.583333
    ;date.sunset_zenith = 90.583333
    [filter]
    ;filter.default = unsafe_raw
    ;filter.default_flags =
    [iconv]
    ;iconv.input_encoding = ISO-8859-1
    ;iconv.internal_encoding = ISO-8859-1
    ;iconv.output_encoding = ISO-8859-1
    [sqlite]
    sqlite.assoc_case = 1
    [Pcre]
    ;PCRE library backtracking limit.
    ;pcre.backtrack_limit=100000
    ;PCRE library recursion limit.
    ;Please note that if you set this value to a high number you may consume all
    ;the available process stack and eventually crash PHP (due to reaching the
    ;stack size limit imposed by the Operating System).
    ;pcre.recursion_limit=100000
    [Syslog]
    ; Whether or not to define the various syslog variables (e.g. $LOG_PID,
    ; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
    ; runtime, you can define these variables by calling define_syslog_variables().
    define_syslog_variables = Off
    [mail function]
    ; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
    ;sendmail_path =
    ; Force the addition of the specified parameters to be passed as extra parameters
    ; to the sendmail binary. These parameters will always replace the value of
    ; the 5th parameter to mail(), even in safe mode.
    ;mail.force_extra_parameters =
    [SQL]
    sql.safe_mode = Off
    [ODBC]
    ;odbc.default_db = Not yet implemented
    ;odbc.default_user = Not yet implemented
    ;odbc.default_pw = Not yet implemented
    ; Allow or prevent persistent links.
    odbc.allow_persistent = On
    ; Check that a connection is still valid before reuse.
    odbc.check_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    odbc.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    odbc.max_links = -1
    ; Handling of LONG fields. Returns number of bytes to variables. 0 means
    ; passthru.
    odbc.defaultlrl = 4096
    ; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
    ; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
    ; of uodbc.defaultlrl and uodbc.defaultbinmode
    odbc.defaultbinmode = 1
    [MySQL]
    ; Allow or prevent persistent links.
    mysql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    mysql.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    mysql.max_links = -1
    ; Default port number for mysql_connect(). If unset, mysql_connect() will use
    ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
    ; compile-time value defined MYSQL_PORT (in that order).
    mysql.default_port =
    ; Default socket name for local MySQL connects. If empty, uses the built-in
    ; MySQL defaults.
    mysql.default_socket =
    ; Default host for mysql_connect() (doesn't apply in safe mode).
    mysql.default_host =
    ; Default user for mysql_connect() (doesn't apply in safe mode).
    mysql.default_user =
    ; Default password for mysql_connect() (doesn't apply in safe mode).
    ; Note that this is generally a *bad* idea to store passwords in this file.
    ; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
    ; and reveal this password! And of course, any users with read access to this
    ; file will be able to reveal the password as well.
    mysql.default_password =
    ; Maximum time (in seconds) for connect timeout. -1 means no limit
    mysql.connect_timeout = 60
    ; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
    ; SQL-Errors will be displayed.
    mysql.trace_mode = Off
    [MySQLi]
    ; Maximum number of links. -1 means no limit.
    mysqli.max_links = -1
    ; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
    ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
    ; compile-time value defined MYSQL_PORT (in that order).
    mysqli.default_port = 3306
    ; Default socket name for local MySQL connects. If empty, uses the built-in
    ; MySQL defaults.
    mysqli.default_socket =
    ; Default host for mysql_connect() (doesn't apply in safe mode).
    mysqli.default_host =
    ; Default user for mysql_connect() (doesn't apply in safe mode).
    mysqli.default_user =
    ; Default password for mysqli_connect() (doesn't apply in safe mode).
    ; Note that this is generally a *bad* idea to store passwords in this file.
    ; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
    ; and reveal this password! And of course, any users with read access to this
    ; file will be able to reveal the password as well.
    mysqli.default_pw =
    ; Allow or prevent reconnect
    mysqli.reconnect = Off
    [mSQL]
    ; Allow or prevent persistent links.
    msql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    msql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    msql.max_links = -1
    [OCI8]
    ; enables privileged connections using external credentials (OCI_SYSOPER, OCI_SYSDBA)
    ;oci8.privileged_connect = Off
    ; Connection: The maximum number of persistent OCI8 connections per
    ; process. Using -1 means no limit.
    ;oci8.max_persistent = -1
    ; Connection: The maximum number of seconds a process is allowed to
    ; maintain an idle persistent connection. Using -1 means idle
    ; persistent connections will be maintained forever.
    ;oci8.persistent_timeout = -1
    ; Connection: The number of seconds that must pass before issuing a
    ; ping during oci_pconnect() to check the connection validity. When
    ; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
    ; pings completely.
    ;oci8.ping_interval = 60
    ; Tuning: This option enables statement caching, and specifies how
    ; many statements to cache. Using 0 disables statement caching.
    ;oci8.statement_cache_size = 20
    ; Tuning: Enables statement prefetching and sets the default number of
    ; rows that will be fetched automatically after statement execution.
    ;oci8.default_prefetch = 10
    ; Compatibility. Using On means oci_close() will not close
    ; oci_connect() and oci_new_connect() connections.
    ;oci8.old_oci_close_semantics = Off
    [PostgresSQL]
    ; Allow or prevent persistent links.
    pgsql.allow_persistent = On
    ; Detect broken persistent links always with pg_pconnect().
    ; Auto reset feature requires a little overheads.
    pgsql.auto_reset_persistent = Off
    ; Maximum number of persistent links. -1 means no limit.
    pgsql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    pgsql.max_links = -1
    ; Ignore PostgreSQL backends Notice message or not.
    ; Notice message logging require a little overheads.
    pgsql.ignore_notice = 0
    ; Log PostgreSQL backends Notice message or not.
    ; Unless pgsql.ignore_notice=0, module cannot log notice message.
    pgsql.log_notice = 0
    [Sybase]
    ; Allow or prevent persistent links.
    sybase.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    sybase.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    sybase.max_links = -1
    ;sybase.interface_file = "/usr/sybase/interfaces"
    ; Minimum error severity to display.
    sybase.min_error_severity = 10
    ; Minimum message severity to display.
    sybase.min_message_severity = 10
    ; Compatibility mode with old versions of PHP 3.0.
    ; If on, this will cause PHP to automatically assign types to results according
    ; to their Sybase type, instead of treating them all as strings. This
    ; compatibility mode will probably not stay around forever, so try applying
    ; whatever necessary changes to your code, and turn it off.
    sybase.compatability_mode = Off
    [Sybase-CT]
    ; Allow or prevent persistent links.
    sybct.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    sybct.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    sybct.max_links = -1
    ; Minimum server message severity to display.
    sybct.min_server_severity = 10
    ; Minimum client message severity to display.
    sybct.min_client_severity = 10
    [bcmath]
    ; Number of decimal digits for all bcmath functions.
    bcmath.scale = 0
    [browscap]
    ;browscap = extra/browscap.ini
    [Informix]
    ; Default host for ifx_connect() (doesn't apply in safe mode).
    ifx.default_host =
    ; Default user for ifx_connect() (doesn't apply in safe mode).
    ifx.default_user =
    ; Default password for ifx_connect() (doesn't apply in safe mode).
    ifx.default_password =
    ; Allow or prevent persistent links.
    ifx.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    ifx.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    ifx.max_links = -1
    ; If on, select statements return the contents of a text blob instead of its id.
    ifx.textasvarchar = 0
    ; If on, select statements return the contents of a byte blob instead of its id.
    ifx.byteasvarchar = 0
    ; Trailing blanks are stripped from fixed-length char columns. May help the
    ; life of Informix SE users.
    ifx.charasvarchar = 0
    ; If on, the contents of text and byte blobs are dumped to a file instead of
    ; keeping them in memory.
    ifx.blobinfile = 0
    ; NULL's are returned as empty strings, unless this is set to 1. In that case,
    ; NULL's are returned as string 'NULL'.
    ifx.nullformat = 0
    [Session]
    ; Handler used to store/retrieve data.
    session.save_handler = files
    ; Argument passed to save_handler. In the case of files, this is the path
    ; where data files are stored.
    ; As of PHP 4.0.1, you can define the path as:
    ; session.save_path = "N;/path"
    ; where N is an integer. Instead of storing all the session files in
    ; /path, what this will do is use subdirectories N-levels deep, and
    ; store the session data in those directories. This is useful if you
    ; or your OS have problems with lots of files in one directory, and is
    ; a more efficient layout for servers that handle lots of sessions.
    ; NOTE 1: PHP will not create this directory structure automatically.
    ; You can use the script in the ext/session dir for that purpose.
    ; NOTE 2: See the section on garbage collection below if you choose to
    ; use subdirectories for session storage
    ; The file storage module creates files using mode 600 by default.
    ; You can change that by using
    ; session.save_path = "N;MODE;/path"
    ; where MODE is the octal representation of the mode. Note that this
    ; does not overwrite the process's umask.
    session.save_path = "/tmp"
    ; Whether to use cookies.
    session.use_cookies = 1
    ;session.cookie_secure =
    ; This option enables administrators to make their users invulnerable to
    ; attacks which involve passing session ids in URLs; defaults to 0.
    ; session.use_only_cookies = 1
    ; Name of the session (used as cookie name).
    session.name = PHPSESSID
    ; Initialize session on request startup.
    session.auto_start = 0
    ; Lifetime in seconds of cookie or, if 0, until browser is restarted.
    session.cookie_lifetime = 0
    ; The path for which the cookie is valid.
    session.cookie_path = /
    ; The domain for which the cookie is valid.
    session.cookie_domain =
    ; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
    session.cookie_httponly =
    ; Handler used to serialize data. php is the standard serializer of PHP.
    session.serialize_handler = php
    ; Define the probability that the 'garbage collection' process is started
    ; on every session initialization.
    ; The probability is calculated by using gc_probability/gc_divisor,
    ; e.g. 1/100 means there is a 1% chance that the GC process starts
    ; on each request.
    session.gc_probability = 1
    session.gc_divisor = 1000
    ; After this number of seconds, stored data will be seen as 'garbage' and
    ; cleaned up by the garbage collection process.
    session.gc_maxlifetime = 1440
    ; NOTE: If you are using the subdirectory option for storing session files
    ; (see session.save_path above), then garbage collection does *not*
    ; happen automatically. You will need to do your own garbage
    ; collection through a shell script, cron entry, or some other method.
    ; For example, the following script would is the equivalent of
    ; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
    ; cd /path/to/sessions; find -cmin +24 | xargs rm
    ; PHP 4.2 and less have an undocumented feature/bug that allows you to
    ; to initialize a session variable in the global scope, albeit register_globals
    ; is disabled. PHP 4.3 and later will warn you, if this feature is used.
    ; You can disable the feature and the warning separately. At this time,
    ; the warning is only displayed, if bug_compat_42 is enabled.
    session.bug_compat_42 = 0
    session.bug_compat_warn = 1
    ; Check HTTP Referer to invalidate externally stored URLs containing ids.
    ; HTTP_REFERER has to contain this substring for the session to be
    ; considered as valid.
    session.referer_check =
    ; How many bytes to read from the file.
    session.entropy_length = 0
    ; Specified here to create the session id.
    session.entropy_file =
    ;session.entropy_length = 16
    ;session.entropy_file = /dev/urandom
    ; Set to {nocache,private,public,} to determine HTTP caching aspects
    ; or leave this empty to avoid sending anti-caching headers.
    session.cache_limiter = nocache
    ; Document expires after n minutes.
    session.cache_expire = 180
    ; trans sid support is disabled by default.
    ; Use of trans sid may risk your users security.
    ; Use this option with caution.
    ; - User may send URL contains active session ID
    ; to other person via. email/irc/etc.
    ; - URL that contains active session ID may be stored
    ; in publically accessible computer.
    ; - User may access your site with the same session ID
    ; always using URL stored in browser's history or bookmarks.
    session.use_trans_sid = 0
    ; Select a hash function
    ; 0: MD5 (128 bits)
    ; 1: SHA-1 (160 bits)
    session.hash_function = 0
    ; Define how many bits are stored in each character when converting
    ; the binary hash data to something readable.
    ; 4 bits: 0-9, a-f
    ; 5 bits: 0-9, a-v
    ; 6 bits: 0-9, a-z, A-Z, "-", ","
    session.hash_bits_per_character = 5
    ; The URL rewriter will look for URLs in a defined set of HTML tags.
    ; form/fieldset are special; if you include them here, the rewriter will
    ; add a hidden <input> field with the info which is otherwise appended
    ; to URLs. If you want XHTML conformity, remove the form entry.
    ; Note that all valid entries require a "=", even if no value follows.
    url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
    [MSSQL]
    ; Allow or prevent persistent links.
    mssql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    mssql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    mssql.max_links = -1
    ; Minimum error severity to display.
    mssql.min_error_severity = 10
    ; Minimum message severity to display.
    mssql.min_message_severity = 10
    ; Compatibility mode with old versions of PHP 3.0.
    mssql.compatability_mode = Off
    ; Connect timeout
    ;mssql.connect_timeout = 5
    ; Query timeout
    ;mssql.timeout = 60
    ; Valid range 0 - 2147483647. Default = 4096.
    ;mssql.textlimit = 4096
    ; Valid range 0 - 2147483647. Default = 4096.
    ;mssql.textsize = 4096
    ; Limits the number of records in each batch. 0 = all records in one batch.
    ;mssql.batchsize = 0
    ; Specify how datetime and datetim4 columns are returned
    ; On => Returns data converted to SQL server settings
    ; Off => Returns values as YYYY-MM-DD hh:mm:ss
    ;mssql.datetimeconvert = On
    ; Use NT authentication when connecting to the server
    mssql.secure_connection = Off
    ; Specify max number of processes. -1 = library default
    ; msdlib defaults to 25
    ; FreeTDS defaults to 4096
    ;mssql.max_procs = -1
    ; Specify client character set.
    ; If empty or not set the client charset from freetds.comf is used
    ; This is only used when compiled with FreeTDS
    ;mssql.charset = "ISO-8859-1"
    [Assertion]
    ; Assert(expr); active by default.
    ;assert.active = On
    ; Issue a PHP warning for each failed assertion.
    ;assert.warning = On
    ; Don't bail out by default.
    ;assert.bail = Off
    ; User-function to be called if an assertion fails.
    ;assert.callback = 0
    ; Eval the expression with current error_reporting(). Set to true if you want
    ; error_reporting(0) around the eval().
    ;assert.quiet_eval = 0
    [COM]
    ; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
    ;com.typelib_file =
    ; allow Distributed-COM calls
    ;com.allow_dcom = true
    ; autoregister constants of a components typlib on com_load()
    ;com.autoregister_typelib = true
    ; register constants casesensitive
    ;com.autoregister_casesensitive = false
    ; show warnings on duplicate constant registrations
    ;com.autoregister_verbose = true
    [mbstring]
    ; language for internal character representation.
    ;mbstring.language = Japanese
    ; internal/script encoding.
    ; Some encoding cannot work as internal encoding.
    ; (e.g. SJIS, BIG5, ISO-2022-*)
    ;mbstring.internal_encoding = EUC-JP
    ; http input encoding.
    ;mbstring.http_input = auto
    ; http output encoding. mb_output_handler must be
    ; registered as output buffer to function
    ;mbstring.http_output = SJIS
    ; enable automatic encoding translation according to
    ; mbstring.internal_encoding setting. Input chars are
    ; converted to internal encoding by setting this to On.
    ; Note: Do _not_ use automatic encoding translation for
    ; portable libs/applications.
    ;mbstring.encoding_translation = Off
    ; automatic encoding detection order.
    ; auto means
    ;mbstring.detect_order = auto
    ; substitute_character used when character cannot be converted
    ; one from another
    ;mbstring.substitute_character = none;
    ; overload(replace) single byte functions by mbstring functions.
    ; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
    ; etc. Possible values are 0,1,2,4 or combination of them.
    ; For example, 7 for overload everything.
    ; 0: No overload
    ; 1: Overload mail() function
    ; 2: Overload str*() functions
    ; 4: Overload ereg*() functions
    ;mbstring.func_overload = 0
    ; enable strict encoding detection.
    ;mbstring.strict_encoding = Off
    [FrontBase]
    ;fbsql.allow_persistent = On
    ;fbsql.autocommit = On
    ;fbsql.show_timestamp_decimals = Off
    ;fbsql.default_database =
    ;fbsql.default_database_password =
    ;fbsql.default_host =
    ;fbsql.default_password =
    ;fbsql.default_user = "_SYSTEM"
    ;fbsql.generate_warnings = Off
    ;fbsql.max_connections = 128
    ;fbsql.max_links = 128
    ;fbsql.max_persistent = -1
    ;fbsql.max_results = 128
    [gd]
    ; Tell the jpeg decode to libjpeg warnings and try to create
    ; a gd image. The warning will then be displayed as notices
    ; disabled by default
    ;gd.jpeg_ignore_warning = 0
    [exif]
    ; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
    ; With mbstring support this will automatically be converted into the encoding
    ; given by corresponding encode setting. When empty mbstring.internal_encoding
    ; is used. For the decode settings you can distinguish between motorola and
    ; intel byte order. A decode setting cannot be empty.
    ;exif.encode_unicode = ISO-8859-15
    ;exif.decode_unicode_motorola = UCS-2BE
    ;exif.decode_unicode_intel = UCS-2LE
    ;exif.encode_jis =
    ;exif.decode_jis_motorola = JIS
    ;exif.decode_jis_intel = JIS
    [Tidy]
    ; The path to a default tidy configuration file to use when using tidy
    ;tidy.default_config = /usr/local/lib/php/default.tcfg
    ; Should tidy clean and repair output automatically?
    ; WARNING: Do not use this option if you are generating non-html content
    ; such as dynamic images
    tidy.clean_output = Off
    [soap]
    ; Enables or disables WSDL caching feature.
    soap.wsdl_cache_enabled=1
    ; Sets the directory name where SOAP extension will put cache files.
    soap.wsdl_cache_dir="/tmp"
    ; (time to live) Sets the number of second while cached file will be used
    ; instead of original one.
    soap.wsdl_cache_ttl=86400
    ; available extensions
    ;extension=bcmath.so
    ;extension=bz2.so
    ;extension=calendar.so
    ;extension=curl.so
    ;extension=dba.so
    ;extension=dbase.so
    ;extension=exif.so
    ;extension=ftp.so
    ;extension=gd.so
    extension=gettext.so
    ;extension=gmp.so
    ;extension=iconv.so
    ;extension=imap.so
    ;extension=json.so
    ;extension=ldap.so
    ;extension=mcrypt.so
    ;extension=mhash.so
    ;extension=mime_magic.so
    ;extension=mysql.so
    ;extension=mysqli.so
    ;extension=ncurses.so
    ;extension=odbc.so
    ;extension=openssl.so
    ;extension=pdo.so
    ;extension=pdo_mysql.so
    ;extension=pdo_odbc.so
    ;extension=pdo_pgsql.so
    ;extension=pdo_sqlite.so
    ;extension=pgsql.so
    ;extension=posix.so
    ;extension=pspell.so
    extension=session.so
    ;extension=shmop.so
    ;extension=snmp.so
    ;extension=soap.so
    extension=sockets.so
    extension=sqlite.so
    ;extension=sysvmsg.so
    ;extension=sysvsem.so
    ;extension=sysvshm.so
    ;extension=tidy.so
    ;extension=xmlrpc.so
    ;extension=xsl.so
    ;extension=zip.so
    extension=zlib.so
    ; Local Variables:
    ; tab-width: 4
    ; End:
    I've attempted enabling pdo.so and pdo_sqlite.so as well, with no results, making sure to stop lighty and flush all of its processes before checking again.
    `php-cgi -m | grep sqlite` does not return anything, either.
    The extensions directory (/usr/lib/php/20060613) exists on my system and contains sqlite.so, as expected.
    I have no clue what's going on here and would greatly appreciate any help offered.
    Last edited by xelados (2009-09-23 04:02:22)

    After the last update which installed PHP 5.3.0, I'm having a similar problem. PHP fails to recognize any extensions which I've defined in php.ini. PHP itself works just fine, so I'm sure this problem is related to the update of PHP.
    Here's my php.ini:
    [PHP]
    ; About php.ini ;
    ; This file controls many aspects of PHP's behavior. In order for PHP to
    ; read it, it must be named 'php.ini'. PHP looks for it in the current
    ; working directory, in the path designated by the environment variable
    ; PHPRC, and in the path that was defined in compile time (in that order).
    ; The path in which the php.ini file is looked for can be overridden using
    ; the -c argument in command line mode.
    ; The syntax of the file is extremely simple. Whitespace and Lines
    ; beginning with a semicolon are silently ignored (as you probably guessed).
    ; Section headers (e.g. [Foo]) are also silently ignored, even though
    ; they might mean something in the future.
    ; Directives are specified using the following syntax:
    ; directive = value
    ; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
    ; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
    ; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
    ; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
    ; Expressions in the INI file are limited to bitwise operators and parentheses:
    ; | bitwise OR
    ; & bitwise AND
    ; ~ bitwise NOT
    ; ! boolean NOT
    ; Boolean flags can be turned on using the values 1, On, True or Yes.
    ; They can be turned off using the values 0, Off, False or No.
    ; An empty string can be denoted by simply not writing anything after the equal
    ; sign, or by using the None keyword:
    ; foo = ; sets foo to an empty string
    ; foo = none ; sets foo to an empty string
    ; foo = "none" ; sets foo to the string 'none'
    ; If you use constants in your value, and these constants belong to a
    ; dynamically loaded extension (either a PHP extension or a Zend extension),
    ; you may only use these constants *after* the line that loads the extension.
    ; About this file ;
    ; This is the recommended, PHP 5-style version of the php.ini-dist file. It
    ; sets some non standard settings, that make PHP more efficient, more secure,
    ; and encourage cleaner coding.
    ; The price is that with these settings, PHP may be incompatible with some
    ; applications, and sometimes, more difficult to develop with. Using this
    ; file is warmly recommended for production sites. As all of the changes from
    ; the standard settings are thoroughly documented, you can go over each one,
    ; and decide whether you want to use it or not.
    ; For general information about the php.ini file, please consult the php.ini-dist
    ; file, included in your PHP distribution.
    ; This file is different from the php.ini-dist file in the fact that it features
    ; different values for several directives, in order to improve performance, while
    ; possibly breaking compatibility with the standard out-of-the-box behavior of
    ; PHP. Please make sure you read what's different, and modify your scripts
    ; accordingly, if you decide to use this file instead.
    ; - register_long_arrays = Off [Performance]
    ; Disables registration of the older (and deprecated) long predefined array
    ; variables ($HTTP_*_VARS). Instead, use the superglobals that were
    ; introduced in PHP 4.1.0
    ; - display_errors = Off [Security]
    ; With this directive set to off, errors that occur during the execution of
    ; scripts will no longer be displayed as a part of the script output, and thus,
    ; will no longer be exposed to remote users. With some errors, the error message
    ; content may expose information about your script, web server, or database
    ; server that may be exploitable for hacking. Production sites should have this
    ; directive set to off.
    ; - log_errors = On [Security]
    ; This directive complements the above one. Any errors that occur during the
    ; execution of your script will be logged (typically, to your server's error log,
    ; but can be configured in several ways). Along with setting display_errors to off,
    ; this setup gives you the ability to fully understand what may have gone wrong,
    ; without exposing any sensitive information to remote users.
    ; - output_buffering = 4096 [Performance]
    ; Set a 4KB output buffer. Enabling output buffering typically results in less
    ; writes, and sometimes less packets sent on the wire, which can often lead to
    ; better performance. The gain this directive actually yields greatly depends
    ; on which Web server you're working with, and what kind of scripts you're using.
    ; - register_argc_argv = Off [Performance]
    ; Disables registration of the somewhat redundant $argv and $argc global
    ; variables.
    ; - magic_quotes_gpc = Off [Performance]
    ; Input data is no longer escaped with slashes so that it can be sent into
    ; SQL databases without further manipulation. Instead, you should use the
    ; function addslashes() on each input element you wish to send to a database.
    ; - variables_order = "GPCS" [Performance]
    ; The environment variables are not hashed into the $_ENV. To access
    ; environment variables, you can use getenv() instead.
    ; - error_reporting = E_ALL [Code Cleanliness, Security(?)]
    ; By default, PHP suppresses errors of type E_NOTICE. These error messages
    ; are emitted for non-critical errors, but that could be a symptom of a bigger
    ; problem. Most notably, this will cause error messages about the use
    ; of uninitialized variables to be displayed.
    ; - allow_call_time_pass_reference = Off [Code cleanliness]
    ; It's not possible to decide to force a variable to be passed by reference
    ; when calling a function. The PHP 4 style to do this is by making the
    ; function require the relevant argument by reference.
    ; - short_open_tag = Off [Portability]
    ; Using short tags is discouraged when developing code meant for redistribution
    ; since short tags may not be supported on the target server.
    ; Language Options ;
    ; Enable the PHP scripting language engine under Apache.
    engine = On
    ; Enable compatibility mode with Zend Engine 1 (PHP 4.x)
    zend.ze1_compatibility_mode = Off
    ; Allow the <? tag. Otherwise, only <?php and <script> tags are recognized.
    ; NOTE: Using short tags should be avoided when developing applications or
    ; libraries that are meant for redistribution, or deployment on PHP
    ; servers which are not under your control, because short tags may not
    ; be supported on the target server. For portable, redistributable code,
    ; be sure not to use short tags.
    short_open_tag = Off
    ; Allow ASP-style <% %> tags.
    asp_tags = Off
    ; The number of significant digits displayed in floating point numbers.
    precision = 14
    ; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
    y2k_compliance = On
    ; Output buffering allows you to send header lines (including cookies) even
    ; after you send body content, at the price of slowing PHP's output layer a
    ; bit. You can enable output buffering during runtime by calling the output
    ; buffering functions. You can also enable output buffering for all files by
    ; setting this directive to On. If you wish to limit the size of the buffer
    ; to a certain size - you can use a maximum number of bytes instead of 'On', as
    ; a value for this directive (e.g., output_buffering=4096).
    output_buffering = Off
    ; You can redirect all of the output of your scripts to a function. For
    ; example, if you set output_handler to "mb_output_handler", character
    ; encoding will be transparently converted to the specified encoding.
    ; Setting any output handler automatically turns on output buffering.
    ; Note: People who wrote portable scripts should not depend on this ini
    ; directive. Instead, explicitly set the output handler using ob_start().
    ; Using this ini directive may cause problems unless you know what script
    ; is doing.
    ; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
    ; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
    ; Note: output_handler must be empty if this is set 'On' !!!!
    ; Instead you must use zlib.output_handler.
    ;output_handler =
    ; Transparent output compression using the zlib library
    ; Valid values for this option are 'off', 'on', or a specific buffer size
    ; to be used for compression (default is 4KB)
    ; Note: Resulting chunk size may vary due to nature of compression. PHP
    ; outputs chunks that are few hundreds bytes each as a result of
    ; compression. If you prefer a larger chunk size for better
    ; performance, enable output_buffering in addition.
    ; Note: You need to use zlib.output_handler instead of the standard
    ; output_handler, or otherwise the output will be corrupted.
    zlib.output_compression = Off
    ;zlib.output_compression_level = -1
    ; You cannot specify additional output handlers if zlib.output_compression
    ; is activated here. This setting does the same as output_handler but in
    ; a different order.
    ;zlib.output_handler =
    ; Implicit flush tells PHP to tell the output layer to flush itself
    ; automatically after every output block. This is equivalent to calling the
    ; PHP function flush() after each and every call to print() or echo() and each
    ; and every HTML block. Turning this option on has serious performance
    ; implications and is generally recommended for debugging purposes only.
    implicit_flush = Off
    ; The unserialize callback function will be called (with the undefined class'
    ; name as parameter), if the unserializer finds an undefined class
    ; which should be instantiated.
    ; A warning appears if the specified function is not defined, or if the
    ; function doesn't include/implement the missing class.
    ; So only set this entry, if you really want to implement such a
    ; callback-function.
    unserialize_callback_func=
    ; When floats & doubles are serialized store serialize_precision significant
    ; digits after the floating point. The default value ensures that when floats
    ; are decoded with unserialize, the data will remain the same.
    serialize_precision = 100
    ; Whether to enable the ability to force arguments to be passed by reference
    ; at function call time. This method is deprecated and is likely to be
    ; unsupported in future versions of PHP/Zend. The encouraged method of
    ; specifying which arguments should be passed by reference is in the function
    ; declaration. You're encouraged to try and turn this option Off and make
    ; sure your scripts work properly with it in order to ensure they will work
    ; with future versions of the language (you will receive a warning each time
    ; you use this feature, and the argument will be passed by value instead of by
    ; reference).
    allow_call_time_pass_reference = Off
    ; Safe Mode
    safe_mode = Off
    ; By default, Safe Mode does a UID compare check when
    ; opening files. If you want to relax this to a GID compare,
    ; then turn on safe_mode_gid.
    safe_mode_gid = Off
    ; When safe_mode is on, UID/GID checks are bypassed when
    ; including files from this directory and its subdirectories.
    ; (directory must also be in include_path or full path must
    ; be used when including)
    safe_mode_include_dir =
    ; When safe_mode is on, only executables located in the safe_mode_exec_dir
    ; will be allowed to be executed via the exec family of functions.
    safe_mode_exec_dir =
    ; Setting certain environment variables may be a potential security breach.
    ; This directive contains a comma-delimited list of prefixes. In Safe Mode,
    ; the user may only alter environment variables whose names begin with the
    ; prefixes supplied here. By default, users will only be able to set
    ; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
    ; Note: If this directive is empty, PHP will let the user modify ANY
    ; environment variable!
    safe_mode_allowed_env_vars = PHP_
    ; This directive contains a comma-delimited list of environment variables that
    ; the end user won't be able to change using putenv(). These variables will be
    ; protected even if safe_mode_allowed_env_vars is set to allow to change them.
    safe_mode_protected_env_vars = LD_LIBRARY_PATH
    ; open_basedir, if set, limits all file operations to the defined directory
    ; and below. This directive makes most sense if used in a per-directory
    ; or per-virtualhost web server configuration file. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    ; open_basedir = /srv/http/:/home/:/tmp/:/usr/share/pear/
    ; This directive allows you to disable certain functions for security reasons.
    ; It receives a comma-delimited list of function names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    disable_functions =
    ; This directive allows you to disable certain classes for security reasons.
    ; It receives a comma-delimited list of class names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    disable_classes =
    ; Colors for Syntax Highlighting mode. Anything that's acceptable in
    ; <span style="color: ???????"> would work.
    ;highlight.string = #DD0000
    ;highlight.comment = #FF9900
    ;highlight.keyword = #007700
    ;highlight.bg = #FFFFFF
    ;highlight.default = #0000BB
    ;highlight.html = #000000
    ; If enabled, the request will be allowed to complete even if the user aborts
    ; the request. Consider enabling it if executing long request, which may end up
    ; being interrupted by the user or a browser timing out.
    ; ignore_user_abort = On
    ; Determines the size of the realpath cache to be used by PHP. This value should
    ; be increased on systems where PHP opens many files to reflect the quantity of
    ; the file operations performed.
    ; realpath_cache_size=16k
    ; Duration of time, in seconds for which to cache realpath information for a given
    ; file or directory. For systems with rarely changing files, consider increasing this
    ; value.
    ; realpath_cache_ttl=120
    ; Misc
    ; Decides whether PHP may expose the fact that it is installed on the server
    ; (e.g. by adding its signature to the Web server header). It is no security
    ; threat in any way, but it makes it possible to determine whether you use PHP
    ; on your server or not.
    expose_php = Off
    ; Resource Limits ;
    max_execution_time = 120 ; Maximum execution time of each script, in seconds
    max_input_time = 120 ; Maximum amount of time each script may spend parsing request data
    ;max_input_nesting_level = 64 ; Maximum input variable nesting level
    memory_limit = 128M ; Maximum amount of memory a script may consume (32MB)
    ; Error handling and logging ;
    ; error_reporting is a bit-field. Or each number up to get desired error
    ; reporting level
    ; E_ALL - All errors and warnings (doesn't include E_STRICT)
    ; E_ERROR - fatal run-time errors
    ; E_RECOVERABLE_ERROR - almost fatal run-time errors
    ; E_WARNING - run-time warnings (non-fatal errors)
    ; E_PARSE - compile-time parse errors
    ; E_NOTICE - run-time notices (these are warnings which often result
    ; from a bug in your code, but it's possible that it was
    ; intentional (e.g., using an uninitialized variable and
    ; relying on the fact it's automatically initialized to an
    ; empty string)
    ; E_STRICT - run-time notices, enable to have PHP suggest changes
    ; to your code which will ensure the best interoperability
    ; and forward compatibility of your code
    ; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
    ; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
    ; initial startup
    ; E_COMPILE_ERROR - fatal compile-time errors
    ; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
    ; E_USER_ERROR - user-generated error message
    ; E_USER_WARNING - user-generated warning message
    ; E_USER_NOTICE - user-generated notice message
    ; Examples:
    ; - Show all errors, except for notices and coding standards warnings
    ;error_reporting = E_ALL & ~E_NOTICE
    ; - Show all errors, except for notices
    ;error_reporting = E_ALL & ~E_NOTICE | E_STRICT
    ; - Show only errors
    ;error_reporting = E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR
    ; - Show all errors, except coding standards warnings
    error_reporting = E_ALL
    ; Print out errors (as a part of the output). For production web sites,
    ; you're strongly encouraged to turn this feature off, and use error logging
    ; instead (see below). Keeping display_errors enabled on a production web site
    ; may reveal security information to end users, such as file paths on your Web
    ; server, your database schema or other information.
    ; possible values for display_errors:
    ; Off - Do not display any errors
    ; stderr - Display errors to STDERR (affects only CGI/CLI binaries!)
    ; On or stdout - Display errors to STDOUT (default)
    ; To output errors to STDERR with CGI/CLI:
    ;display_errors = "stderr"
    ; Default
    display_errors = On
    ; Even when display_errors is on, errors that occur during PHP's startup
    ; sequence are not displayed. It's strongly recommended to keep
    ; display_startup_errors off, except for when debugging.
    display_startup_errors = Off
    ; Log errors into a log file (server-specific log, stderr, or error_log (below))
    ; As stated above, you're strongly advised to use error logging in place of
    ; error displaying on production web sites.
    log_errors = Off
    ; Set maximum length of log_errors. In error_log information about the source is
    ; added. The default is 1024 and 0 allows to not apply any maximum length at all.
    log_errors_max_len = 1024
    ; Do not log repeated messages. Repeated errors must occur in same file on same
    ; line until ignore_repeated_source is set true.
    ignore_repeated_errors = Off
    ; Ignore source of message when ignoring repeated messages. When this setting
    ; is On you will not log errors with repeated messages from different files or
    ; source lines.
    ignore_repeated_source = Off
    ; If this parameter is set to Off, then memory leaks will not be shown (on
    ; stdout or in the log). This has only effect in a debug compile, and if
    ; error reporting includes E_WARNING in the allowed list
    report_memleaks = Off
    ;report_zend_debug = 0
    ; Store the last error/warning message in $php_errormsg (boolean).
    track_errors = Off
    ; Disable the inclusion of HTML tags in error messages.
    ; Note: Never use this feature for production boxes.
    ;html_errors = Off
    ; If html_errors is set On PHP produces clickable error messages that direct
    ; to a page describing the error or function causing the error in detail.
    ; You can download a copy of the PHP manual from http://www.php.net/docs.php
    ; and change docref_root to the base URL of your local copy including the
    ; leading '/'. You must also specify the file extension being used including
    ; the dot.
    ; Note: Never use this feature for production boxes.
    ;docref_root = "/phpmanual/"
    ;docref_ext = .html
    ; String to output before an error message.
    ;error_prepend_string = "<font color=ff0000>"
    ; String to output after an error message.
    ;error_append_string = "</font>"
    ; Log errors to specified file.
    ;error_log = filename
    ; Log errors to syslog.
    error_log = syslog
    ; Data Handling ;
    ; Note - track_vars is ALWAYS enabled as of PHP 4.0.3
    ; The separator used in PHP generated URLs to separate arguments.
    ; Default is "&".
    ;arg_separator.output = "&"
    ; List of separator(s) used by PHP to parse input URLs into variables.
    ; Default is "&".
    ; NOTE: Every character in this directive is considered as separator!
    ;arg_separator.input = ";&"
    ; This directive describes the order in which PHP registers GET, POST, Cookie,
    ; Environment and Built-in variables (G, P, C, E & S respectively, often
    ; referred to as EGPCS or GPC). Registration is done from left to right, newer
    ; values override older values.
    variables_order = "GPCS"
    ; Whether or not to register the EGPCS variables as global variables. You may
    ; want to turn this off if you don't want to clutter your scripts' global scope
    ; with user data. This makes most sense when coupled with track_vars - in which
    ; case you can access all of the GPC variables through the $HTTP_*_VARS[],
    ; variables.
    ; You should do your best to write your scripts so that they do not require
    ; register_globals to be on; Using form variables as globals can easily lead
    ; to possible security problems, if the code is not very well thought of.
    register_globals = Off
    ; Whether or not to register the old-style input arrays, HTTP_GET_VARS
    ; and friends. If you're not using them, it's recommended to turn them off,
    ; for performance reasons.
    register_long_arrays = Off
    ; This directive tells PHP whether to declare the argv&argc variables (that
    ; would contain the GET information). If you don't use these variables, you
    ; should turn it off for increased performance.
    register_argc_argv = Off
    ; When enabled, the SERVER and ENV variables are created when they're first
    ; used (Just In Time) instead of when the script starts. If these variables
    ; are not used within a script, having this directive on will result in a
    ; performance gain. The PHP directives register_globals, register_long_arrays,
    ; and register_argc_argv must be disabled for this directive to have any affect.
    auto_globals_jit = On
    ; Maximum size of POST data that PHP will accept.
    post_max_size = 128M
    ; Magic quotes
    ; Magic quotes for incoming GET/POST/Cookie data.
    magic_quotes_gpc = Off
    ; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
    magic_quotes_runtime = Off
    ; Use Sybase-style magic quotes (escape ' with '' instead of \').
    magic_quotes_sybase = Off
    ; Automatically add files before or after any PHP document.
    auto_prepend_file =
    auto_append_file =
    ; As of 4.0b4, PHP always outputs a character encoding by default in
    ; the Content-type: header. To disable sending of the charset, simply
    ; set it to be empty.
    ; PHP's built-in default is text/html
    default_mimetype = "text/html"
    ;default_charset = "iso-8859-1"
    ; Always populate the $HTTP_RAW_POST_DATA variable.
    ;always_populate_raw_post_data = On
    ; Paths and Directories ;
    ; UNIX: "/path1:/path2"
    ;include_path = ".:/usr/share/pear"
    ; The root of the PHP pages, used only if nonempty.
    ; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
    ; if you are running php as a CGI under any web server (other than IIS)
    ; see documentation for security issues. The alternate is to use the
    ; cgi.force_redirect configuration below
    doc_root =
    ; The directory under which PHP opens the script using /~username used only
    ; if nonempty.
    user_dir =
    ; Directory in which the loadable extensions (modules) reside.
    extension_dir = "/usr/lib/php/modules/"
    ; Whether or not to enable the dl() function. The dl() function does NOT work
    ; properly in multithreaded servers, such as IIS or Zeus, and is automatically
    ; disabled on them.
    enable_dl = Off
    ; cgi.force_redirect is necessary to provide security running PHP as a CGI under
    ; most web servers. Left undefined, PHP turns this on by default. You can
    ; turn it off here AT YOUR OWN RISK
    ; **You CAN safely turn this off for IIS, in fact, you MUST.**
    ; cgi.force_redirect = 1
    ; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
    ; every request.
    ; cgi.nph = 1
    ; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
    ; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
    ; will look for to know it is OK to continue execution. Setting this variable MAY
    ; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
    ; cgi.redirect_status_env = ;
    ; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
    ; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
    ; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
    ; this to 1 will cause PHP CGI to fix it's paths to conform to the spec. A setting
    ; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
    ; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
    ; cgi.fix_pathinfo=1
    ; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
    ; security tokens of the calling client. This allows IIS to define the
    ; security context that the request runs under. mod_fastcgi under Apache
    ; does not currently support this feature (03/17/2002)
    ; Set to 1 if running under IIS. Default is zero.
    ; fastcgi.impersonate = 1;
    ; Disable logging through FastCGI connection
    ; fastcgi.logging = 0
    ; cgi.rfc2616_headers configuration option tells PHP what type of headers to
    ; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
    ; is supported by Apache. When this option is set to 1 PHP will send
    ; RFC2616 compliant header.
    ; Default is zero.
    ;cgi.rfc2616_headers = 0
    ; File Uploads ;
    ; Whether to allow HTTP file uploads.
    file_uploads = On
    ; Temporary directory for HTTP uploaded files (will use system default if not
    ; specified).
    ;upload_tmp_dir =
    ; Maximum allowed size for uploaded files.
    upload_max_filesize = 128M
    ; Fopen wrappers ;
    ; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
    allow_url_fopen = On
    ; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
    allow_url_include = Off
    ; Define the anonymous ftp password (your email address)
    ;from="[email protected]"
    ; Define the User-Agent string
    ; user_agent="PHP"
    ; Default timeout for socket based streams (seconds)
    default_socket_timeout = 10
    ; Dynamic Extensions ;
    ; If you wish to have an extension loaded automatically, use the following
    ; syntax:
    ; extension=modulename.extension
    ; For example, under UNIX:
    ; extension=msql.so
    ; Note that it should be the name of the module only; no directory information
    ; needs to go here. Specify the location of the extension with the
    ; extension_dir directive above.
    ; Module Settings ;
    [Date]
    ; Defines the default timezone used by the date functions
    ;date.timezone =
    ;date.default_latitude = 31.7667
    ;date.default_longitude = 35.2333
    ;date.sunrise_zenith = 90.583333
    ;date.sunset_zenith = 90.583333
    [filter]
    ;filter.default = unsafe_raw
    ;filter.default_flags =
    [iconv]
    ;iconv.input_encoding = ISO-8859-1
    ;iconv.internal_encoding = ISO-8859-1
    ;iconv.output_encoding = ISO-8859-1
    [sqlite]
    ;sqlite.assoc_case = 0
    [xmlrpc]
    ;xmlrpc_error_number = 0
    ;xmlrpc_errors = 0
    [Pcre]
    ;PCRE library backtracking limit.
    ;pcre.backtrack_limit=100000
    ;PCRE library recursion limit.
    ;Please note that if you set this value to a high number you may consume all
    ;the available process stack and eventually crash PHP (due to reaching the
    ;stack size limit imposed by the Operating System).
    ;pcre.recursion_limit=100000
    [Syslog]
    ; Whether or not to define the various syslog variables (e.g. $LOG_PID,
    ; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
    ; runtime, you can define these variables by calling define_syslog_variables().
    define_syslog_variables = Off
    [mail function]
    ; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
    ;sendmail_path =
    ; Force the addition of the specified parameters to be passed as extra parameters
    ; to the sendmail binary. These parameters will always replace the value of
    ; the 5th parameter to mail(), even in safe mode.
    ;mail.force_extra_parameters =
    [SQL]
    sql.safe_mode = Off
    [ODBC]
    ;odbc.default_db = Not yet implemented
    ;odbc.default_user = Not yet implemented
    ;odbc.default_pw = Not yet implemented
    ; Allow or prevent persistent links.
    odbc.allow_persistent = On
    ; Check that a connection is still valid before reuse.
    odbc.check_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    odbc.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    odbc.max_links = -1
    ; Handling of LONG fields. Returns number of bytes to variables. 0 means
    ; passthru.
    odbc.defaultlrl = 4096
    ; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
    ; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
    ; of uodbc.defaultlrl and uodbc.defaultbinmode
    odbc.defaultbinmode = 1
    [MySQL]
    ; Allow or prevent persistent links.
    mysql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    mysql.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    mysql.max_links = -1
    ; Default port number for mysql_connect(). If unset, mysql_connect() will use
    ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
    ; compile-time value defined MYSQL_PORT (in that order).
    mysql.default_port =
    ; Default socket name for local MySQL connects. If empty, uses the built-in
    ; MySQL defaults.
    mysql.default_socket =
    ; Default host for mysql_connect() (doesn't apply in safe mode).
    mysql.default_host =
    ; Default user for mysql_connect() (doesn't apply in safe mode).
    mysql.default_user =
    ; Default password for mysql_connect() (doesn't apply in safe mode).
    ; Note that this is generally a *bad* idea to store passwords in this file.
    ; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
    ; and reveal this password! And of course, any users with read access to this
    ; file will be able to reveal the password as well.
    mysql.default_password =
    ; Maximum time (in seconds) for connect timeout. -1 means no limit
    mysql.connect_timeout = 60
    ; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
    ; SQL-Errors will be displayed.
    mysql.trace_mode = Off
    [MySQLi]
    ; Maximum number of links. -1 means no limit.
    mysqli.max_links = -1
    ; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
    ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
    ; compile-time value defined MYSQL_PORT (in that order).
    mysqli.default_port = 3306
    ; Default socket name for local MySQL connects. If empty, uses the built-in
    ; MySQL defaults.
    mysqli.default_socket =
    ; Default host for mysql_connect() (doesn't apply in safe mode).
    mysqli.default_host =
    ; Default user for mysql_connect() (doesn't apply in safe mode).
    mysqli.default_user =
    ; Default password for mysqli_connect() (doesn't apply in safe mode).
    ; Note that this is generally a *bad* idea to store passwords in this file.
    ; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
    ; and reveal this password! And of course, any users with read access to this
    ; file will be able to reveal the password as well.
    mysqli.default_pw =
    ; Allow or prevent reconnect
    mysqli.reconnect = Off
    [mSQL]
    ; Allow or prevent persistent links.
    msql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    msql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    msql.max_links = -1
    [OCI8]
    ; enables privileged connections using external credentials (OCI_SYSOPER, OCI_SYSDBA)
    ;oci8.privileged_connect = Off
    ; Connection: The maximum number of persistent OCI8 connections per
    ; process. Using -1 means no limit.
    ;oci8.max_persistent = -1
    ; Connection: The maximum number of seconds a process is allowed to
    ; maintain an idle persistent connection. Using -1 means idle
    ; persistent connections will be maintained forever.
    ;oci8.persistent_timeout = -1
    ; Connection: The number of seconds that must pass before issuing a
    ; ping during oci_pconnect() to check the connection validity. When
    ; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
    ; pings completely.
    ;oci8.ping_interval = 60
    ; Tuning: This option enables statement caching, and specifies how
    ; many statements to cache. Using 0 disables statement caching.
    ;oci8.statement_cache_size = 20
    ; Tuning: Enables statement prefetching and sets the default number of
    ; rows that will be fetched automatically after statement execution.
    ;oci8.default_prefetch = 10
    ; Compatibility. Using On means oci_close() will not close
    ; oci_connect() and oci_new_connect() connections.
    ;oci8.old_oci_close_semantics = Off
    [PostgresSQL]
    ; Allow or prevent persistent links.
    pgsql.allow_persistent = On
    ; Detect broken persistent links always with pg_pconnect().
    ; Auto reset feature requires a little overheads.
    pgsql.auto_reset_persistent = Off
    ; Maximum number of persistent links. -1 means no limit.
    pgsql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    pgsql.max_links = -1
    ; Ignore PostgreSQL backends Notice message or not.
    ; Notice message logging require a little overheads.
    pgsql.ignore_notice = 0
    ; Log PostgreSQL backends Noitce message or not.
    ; Unless pgsql.ignore_notice=0, module cannot log notice message.
    pgsql.log_notice = 0
    [Sybase]
    ; Allow or prevent persistent links.
    sybase.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    sybase.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    sybase.max_links = -1
    ;sybase.interface_file = "/usr/sybase/interfaces"
    ; Minimum error severity to display.
    sybase.min_error_severity = 10
    ; Minimum message severity to display.
    sybase.min_message_severity = 10
    ; Compatibility mode with old versions of PHP 3.0.
    ; If on, this will cause PHP to automatically assign types to results according
    ; to their Sybase type, instead of treating them all as strings. This
    ; compatibility mode will probably not stay around forever, so try applying
    ; whatever necessary changes to your code, and turn it off.
    sybase.compatability_mode = Off
    [Sybase-CT]
    ; Allow or prevent persistent links.
    sybct.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    sybct.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    sybct.max_links = -1
    ; Minimum server message severity to display.
    sybct.min_server_severity = 10
    ; Minimum client message severity to display.
    sybct.min_client_severity = 10
    [bcmath]
    ; Number of decimal digits for all bcmath functions.
    bcmath.scale = 0
    [browscap]
    ;browscap = extra/browscap.ini
    [Informix]
    ; Default host for ifx_connect() (doesn't apply in safe mode).
    ifx.default_host =
    ; Default user for ifx_connect() (doesn't apply in safe mode).
    ifx.default_user =
    ; Default password for ifx_connect() (doesn't apply in safe mode).
    ifx.default_password =
    ; Allow or prevent persistent links.
    ifx.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    ifx.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    ifx.max_links = -1
    ; If on, select statements return the contents of a text blob instead of its id.
    ifx.textasvarchar = 0
    ; If on, select statements return the contents of a byte blob instead of its id.
    ifx.byteasvarchar = 0
    ; Trailing blanks are stripped from fixed-length char columns. May help the
    ; life of Informix SE users.
    ifx.charasvarchar = 0
    ; If on, the contents of text and byte blobs are dumped to a file instead of
    ; keeping them in memory.
    ifx.blobinfile = 0
    ; NULL's are returned as empty strings, unless this is set to 1. In that case,
    ; NULL's are returned as string 'NULL'.
    ifx.nullformat = 0
    [Session]
    ; Handler used to store/retrieve data.
    session.save_handler = files
    ; Argument passed to save_handler. In the case of files, this is the path
    ; where data files are stored.
    ; As of PHP 4.0.1, you can define the path as:
    ; session.save_path = "N;/path"
    ; where N is an integer. Instead of storing all the session files in
    ; /path, what this will do is use subdirectories N-levels deep, and
    ; store the session data in those directories. This is useful if you
    ; or your OS have problems with lots of files in one directory, and is
    ; a more efficient layout for servers that handle lots of sessions.
    ; NOTE 1: PHP will not create this directory structure automatically.
    ; You can use the script in the ext/session dir for that purpose.
    ; NOTE 2: See the section on garbage collection below if you choose to
    ; use subdirectories for session storage
    ; The file storage module creates files using mode 600 by default.
    ; You can change that by using
    ; session.save_path = "N;MODE;/path"
    ; where MODE is the octal representation of the mode. Note that this
    ; does not overwrite the process's umask.
    session.save_path = "/www/sessions"
    ; Whether to use cookies.
    session.use_cookies = 1
    ;session.cookie_secure =
    ; This option enables administrators to make their users invulnerable to
    ; attacks which involve passing session ids in URLs; defaults to 0.
    session.use_only_cookies = 1
    ; Name of the session (used as cookie name).
    session.name = ServerSessionIdentifier
    ; Initialize session on request startup.
    session.auto_start = 0
    ; Lifetime in seconds of cookie or, if 0, until browser is restarted.
    session.cookie_lifetime = 0
    ; The path for which the cookie is valid.
    session.cookie_path = /
    ; The domain for which the cookie is valid.
    session.cookie_domain =
    ; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
    session.cookie_httponly = 1
    ; Handler used to serialize data. php is the standard serializer of PHP.
    session.serialize_handler = php
    ; Define the probability that the 'garbage collection' process is started
    ; on every session initialization.
    ; The probability is calculated by using gc_probability/gc_divisor,
    ; e.g. 1/100 means there is a 1% chance that the GC process starts
    ; on each request.
    session.gc_probability = 1
    session.gc_divisor = 30
    ; After this number of seconds, stored data will be seen as 'garbage' and
    ; cleaned up by the garbage collection process.
    session.gc_maxlifetime = 3600
    ; NOTE: If you are using the subdirectory option for storing session files
    ; (see session.save_path above), then garbage collection does *not*
    ; happen automatically. You will need to do your own garbage
    ; collection through a shell script, cron entry, or some other method.
    ; For example, the following script would is the equivalent of
    ; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
    ; cd /path/to/sessions; find -cmin +24 | xargs rm
    ; PHP 4.2 and less have an undocumented feature/bug that allows you to
    ; to initialize a session variable in the global scope, albeit register_globals
    ; is disabled. PHP 4.3 and later will warn you, if this feature is used.
    ; You can disable the feature and the warning separately. At this time,
    ; the warning is only displayed, if bug_compat_42 is enabled.
    session.bug_compat_42 = 0
    session.bug_compat_warn = 1
    ; Check HTTP Referer to invalidate externally stored URLs containing ids.
    ; HTTP_REFERER has to contain this substring for the session to be
    ; considered as valid.
    session.referer_check =
    ; How many bytes to read from the file.
    session.entropy_length = 0
    ; Specified here to create the session id.
    session.entropy_file =
    ;session.entropy_length = 16
    ;session.entropy_file = /dev/urandom
    ; Set to {nocache,private,public,} to determine HTTP caching aspects
    ; or leave this empty to avoid sending anti-caching headers.
    session.cache_limiter = none
    ; Document expires after n minutes.
    session.cache_expire = 0
    ; trans sid support is disabled by default.
    ; Use of trans sid may risk your users security.
    ; Use this option with caution.
    ; - User may send URL contains active session ID
    ; to other person via. email/irc/etc.
    ; - URL that contains active session ID may be stored
    ; in publically accessible computer.
    ; - User may access your site with the same session ID
    ; always using URL stored in browser's history or bookmarks.
    session.use_trans_sid = 0
    ; Select a hash function
    ; 0: MD5 (128 bits)
    ; 1: SHA-1 (160 bits)
    session.hash_function = 1
    ; Define how many bits are stored in each character when converting
    ; the binary hash data to something readable.
    ; 4 bits: 0-9, a-f
    ; 5 bits: 0-9, a-v
    ; 6 bits: 0-9, a-z, A-Z, "-", ","
    session.hash_bits_per_character = 6
    ; The URL rewriter will look for URLs in a defined set of HTML tags.
    ; form/fieldset are special; if you include them here, the rewriter will
    ; add a hidden <input> field with the info which is otherwise appended
    ; to URLs. If you want XHTML conformity, remove the form entry.
    ; Note that all valid entries require a "=", even if no value follows.
    ;url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
    [MSSQL]
    ; Allow or prevent persistent links.
    mssql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    mssql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    mssql.max_links = -1
    ; Minimum error severity to display.
    mssql.min_error_severity = 10
    ; Minimum message severity to display.
    mssql.min_message_severity = 10
    ; Compatibility mode with old versions of PHP 3.0.
    mssql.compatability_mode = Off
    ; Connect timeout
    ;mssql.connect_timeout = 5
    ; Query timeout
    ;mssql.timeout = 60
    ; Valid range 0 - 2147483647. Default = 4096.
    ;mssql.textlimit = 4096
    ; Valid range 0 - 2147483647. Default = 4096.
    ;mssql.textsize = 4096
    ; Limits the number of records in each batch. 0 = all records in one batch.
    ;mssql.batchsize = 0
    ; Specify how datetime and datetim4 columns are returned
    ; On => Returns data converted to SQL server settings
    ; Off => Returns values as YYYY-MM-DD hh:mm:ss
    ;mssql.datetimeconvert = On
    ; Use NT authentication when connecting to the server
    mssql.secure_connection = Off
    ; Specify max number of processes. -1 = library default
    ; msdlib defaults to 25
    ; FreeTDS defaults to 4096
    ;mssql.max_procs = -1
    ; Specify client character set.
    ; If empty or not set the client charset from freetds.comf is used
    ; This is only used when compiled with FreeTDS
    ;mssql.charset = "ISO-8859-1"
    [Assertion]
    ; Assert(expr); active by default.
    ;assert.active = On
    ; Issue a PHP warning for each failed assertion.
    ;assert.warning = On
    ; Don't bail out by default.
    ;assert.bail = Off
    ; User-function to be called if an assertion fails.
    ;assert.callback = 0
    ; Eval the expression with current error_reporting(). Set to true if you want
    ; error_reporting(0) around the eval().
    ;assert.quiet_eval = 0
    [COM]
    ; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
    ;com.typelib_file =
    ; allow Distributed-COM calls
    ;com.allow_dcom = true
    ; autoregister constants of a components typlib on com_load()
    ;com.autoregister_typelib = true
    ; register constants casesensitive
    ;com.autoregister_casesensitive = false
    ; show warnings on duplicate constant registrations
    ;com.autoregister_verbose = true
    [mbstring]
    ; language for internal character representation.
    ;mbstring.language = Japanese
    ; internal/script encoding.
    ; Some encoding cannot work as internal encoding.
    ; (e.g. SJIS, BIG5, ISO-2022-*)
    ;mbstring.internal_encoding = EUC-JP
    ; http input encoding.
    ;mbstring.http_input = auto
    ; http output encoding. mb_output_handler must be
    ; registered as output buffer to function
    ;mbstring.http_output = SJIS
    ; enable automatic encoding translation according to
    ; mbstring.internal_encoding setting. Input chars are
    ; converted to internal encoding by setting this to On.
    ; Note: Do _not_ use automatic encoding translation for
    ; portable libs/applications.
    ;mbstring.encoding_translation = Off
    ; automatic encoding detection order.
    ; auto means
    ;mbstring.detect_order = auto
    ; substitute_character used when character cannot be converted
    ; one from another
    ;mbstring.substitute_character = none;
    ; overload(replace) single byte functions by mbstring functions.
    ; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
    ; etc. Possible values are 0,1,2,4 or combination of them.
    ; For example, 7 for overload everything.
    ; 0: No overload
    ; 1: Overload mail() function
    ; 2: Overload str*() functions
    ; 4: Overload ereg*() functions
    ;mbstring.func_overload = 0
    ; enable strict encoding detection.
    ;mbstring.strict_encoding = Off
    [FrontBase]
    ;fbsql.allow_persistent = On
    ;fbsql.autocommit = On
    ;fbsql.show_timestamp_decimals = Off
    ;fbsql.default_database =
    ;fbsql.default_database_password =
    ;fbsql.default_host =
    ;fbsql.default_password =
    ;fbsql.default_user = "_SYSTEM"
    ;fbsql.generate_warnings = Off
    ;fbsql.max_connections = 128
    ;fbsql.max_links = 128
    ;fbsql.max_persistent = -1
    ;fbsql.max_results = 128
    [gd]
    ; Tell the jpeg decode to libjpeg warnings and try to create
    ; a gd image. The warning will then be displayed as notices
    ; disabled by default
    ;gd.jpeg_ignore_warning = 0
    [exif]
    ; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
    ; With mbstring support this will automatically be converted into the encoding
    ; given by corresponding encode setting. When empty mbstring.internal_encoding
    ; is used. For the decode settings you can distinguish between motorola and
    ; intel byte order. A decode setting cannot be empty.
    ;exif.encode_unicode = ISO-8859-15
    ;exif.decode_unicode_motorola = UCS-2BE
    ;exif.decode_unicode_intel = UCS-2LE
    ;exif.encode_jis =
    ;exif.decode_jis_motorola = JIS
    ;exif.decode_jis_intel = JIS
    [Tidy]
    ; The path to a default tidy configuration file to use when using tidy
    ;tidy.default_config = /usr/local/lib/php/default.tcfg
    ; Should tidy clean and repair output automatically?
    ; WARNING: Do not use this option if you are generating non-html content
    ; such as dynamic images
    tidy.clean_output = Off
    [soap]
    ; Enables or disables WSDL caching feature.
    soap.wsdl_cache_enabled=1
    ; Sets the directory name where SOAP extension will put cache files.
    soap.wsdl_cache_dir="/tmp"
    ; (time to live) Sets the number of second while cached file will be used
    ; instead of original one.
    soap.wsdl_cache_ttl=86400
    ; available extensions
    ;extension=bcmath.so
    ;extension=bz2.so
    ;extension=calendar.so
    ;extension=curl.so
    ;extension=dba.so
    ;extension=dbase.so
    ;extension=exif.so
    ;extension=ftp.so
    extension=gd.so
    extension=gettext.so
    ;extension=iconv.so
    ;extension=imap.so
    ;extension=json.so
    ;extension=ldap.so
    extension=mcrypt.so
    ;extension=mime_magic.so
    extension=mysql.so
    ;extension=mysqli.so
    ;extension=ncurses.so
    ;extension=odbc.so
    extension=openssl.so
    extension=pdo.so
    extension=pdo_mysql.so
    ;extension=pdo_odbc.so
    ;extension=pdo_pgsql.so
    ;extension=pdo_sqlite.so
    ;extension=pgsql.so
    ;extension=posix.so
    ;extension=pspell.so
    extension=session.so
    ;extension=shmop.so
    ;extension=snmp.so
    ;extension=soap.so
    extension=sockets.so
    ;extension=sqlite.so
    ;extension=sysvmsg.so
    ;extension=sysvsem.so
    ;extension=sysvshm.so
    ;extension=tidy.so
    ;extension=xmlrpc.so
    ;extension=xsl.so
    ;extension=zip.so
    extension=zlib.so
    ; Local Variables:
    ; tab-width: 4
    ; End:
    Some more info:
    [root@Taurine etc]# php-cgi -m
    [PHP Modules]
    cgi-fcgi
    Core
    ctype
    date
    dom
    ereg
    fileinfo
    filter
    gettext
    hash
    libxml
    mbstring
    mysql
    mysqlnd
    openssl
    pcre
    PDO
    pdo_mysql
    Reflection
    session
    SimpleXML
    sockets
    SPL
    standard
    tokenizer
    xml
    xmlreader
    xmlwriter
    zlib
    [Zend Modules]
    [root@Taurine etc]# php-cgi -v
    PHP 5.3.0 with Suhosin-Patch (cgi-fcgi) (built: Sep 16 2009 13:55:34)
    Copyright (c) 1997-2009 The PHP Group
    Zend Engine v2.3.0, Copyright (c) 1998-2009 Zend Technologies
    [root@Taurine etc]# cd /usr/lib/php/modules/
    [root@Taurine modules]# ls -alh
    totalt 3,2M
    drwxr-xr-x 2 root root 4,0K 16 sep 13.57 .
    drwxr-xr-x 4 root root 4,0K 16 sep 13.57 ..
    -rwxr-xr-x 1 root root 27K 16 sep 13.57 bcmath.so
    -rwxr-xr-x 1 root root 21K 16 sep 13.57 bz2.so
    -rwxr-xr-x 1 root root 25K 16 sep 13.57 calendar.so
    -rwxr-xr-x 1 root root 51K 16 sep 13.57 dba.so
    -rwxr-xr-x 1 root root 52K 16 sep 13.57 exif.so
    -rwxr-xr-x 1 root root 46K 16 sep 13.57 ftp.so
    -rwxr-xr-x 1 root root 11K 16 sep 13.57 gettext.so
    -rwxr-xr-x 1 root root 37K 16 sep 13.57 iconv.so
    -rwxr-xr-x 1 root root 1,2M 16 sep 13.57 imap.so
    -rwxr-xr-x 1 root root 35K 16 sep 13.57 json.so
    -rwxr-xr-x 1 root root 43K 16 sep 13.57 mysql.so
    -rwxr-xr-x 1 root root 109K 16 sep 13.57 mysqli.so
    -rwxr-xr-x 1 root root 110K 16 sep 13.57 openssl.so
    -rwxr-xr-x 1 root root 98K 16 sep 13.57 pdo.so
    -rwxr-xr-x 1 root root 24K 16 sep 13.57 pdo_mysql.so
    -rwxr-xr-x 1 root root 286K 16 sep 13.57 phar.so
    -rwxr-xr-x 1 root root 26K 16 sep 13.57 posix.so
    -rwxr-xr-x 1 root root 9,8K 16 sep 13.57 shmop.so
    -rwxr-xr-x 1 root root 356K 16 sep 13.57 soap.so
    -rwxr-xr-x 1 root root 46K 16 sep 13.57 sockets.so
    -rwxr-xr-x 1 root root 355K 16 sep 13.57 sqlite.so
    -rwxr-xr-x 1 root root 15K 16 sep 13.57 sysvmsg.so
    -rwxr-xr-x 1 root root 8,3K 16 sep 13.57 sysvsem.so
    -rwxr-xr-x 1 root root 11K 16 sep 13.57 sysvshm.so
    -rwxr-xr-x 1 root root 79K 16 sep 13.57 xmlrpc.so
    -rwxr-xr-x 1 root root 79K 16 sep 13.57 zip.so
    Last edited by nullvoid (2009-09-22 17:39:47)

  • How to setup a whisper prompt in UCCX Script?

    Guys
    I need some help here.
    We have a cisco UCCX setup which was designed and implemented by a vendor. They had the script written. I want to modify that to have a whisper prompt for the agents to hear something before they start their talk.
    Is there something that anyone can guide me to tell me what actually has to be done on a script to input this whisper message. I have a prompt for that. But don't know where and what to start with.
    Any help is much appreciated.

    @Gergely : For your first question, the answer it yes. The agent should hear that recording before he does go the customer call.
    But the second note what you sent, I don't think that is correct. Because UCCX script supports that. I have pasted a sample below which a whisper prompt works in one of our UCCX script. See below.
    Correct me If I am wrong.

  • Help with bind variables

    Hello I'm new to .net and I'm trying to work with bind variables
    I keep getting the ORA-01036: illegal variable name/number error.
    here's my code, can somebody help me out and show me what am I doing wrong?
    Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
    Dim drLocation As OracleDataReader = getSCLocation("SOMEBODY")
    End Sub
    Private Function getSCLocation(ByVal contactName As String) As OracleDataReader
    Dim drLocation As OracleDataReader
    Dim connString As String = ConfigurationManager.ConnectionStrings("scConnString").ConnectionString
    Dim conn As New OracleConnection(connString)
    conn.Open()
    Dim queryString As String = "select a.location, a.location_name from locationm1 a where a.primary_contact_dept in (select b.dept from contactsm1 b where b.contact_name = p_contactName)"
    Dim p_contactName As New OracleParameter
    p_contactName.OracleType = OracleType.VarChar
    p_contactName.Value = contactName
    Dim cmdLocation As New OracleCommand(queryString, conn)
    cmdLocation.Parameters.Add(p_contactName)
    drLocation = cmdLocation.ExecuteReader(CommandBehavior.CloseConnection)
    Return drLocation
    End Function
    Thanks
    Peter

    never mind i got it by playing around with it
    had to change the way to start the bind variable
    Dim p_contactName As New OracleParameter("p_contactName", OracleType.VarChar)
    p_contactName.Size = 140
    p_contactName.Value = contactName

  • Keymapping problem when working with emacs and openbox

    I have an apple keyboard and I had to do some remapping of the keys to make the mod-4 key the first key to the left of the space bar for when working with Emacs.  The below script worked fine when I was using the dwm window manager, but after switching to openbox I have found that instead of swapping keycodes between the option and command keys, only the command key seems to be working since the initial openbox command-space doesn't work when pressing option-space.
    One odd thing I noticed, was on the new setup when I click run `showkey` and press the option and command keys I get 56 and 125 respectively, but these keys don't work at all when inserting them into the below script instead of the 64 and 133.
    I must admit I created the script below by continually tweaking it until it worked so there could be a much better way of doing it.
    //.xmodmap
    ### capslock => ctrl
    xmodmap -e "clear Lock"
    xmodmap -e "add Control = Caps_Lock"
    ### switch alt and command
    xmodmap -e "keycode 64 = Alt_L"
    xmodmap -e "keycode 133 = Meta_L"
    ### remap of mod 4
    xmodmap -e "clear Mod4"
    xmodmap -e "add Mod4 = Super_L"
    ** Update:  The Alt key is not being swapped with the command key, but is not just a duplicate.  So no M-x can be done by both Alt-x and Command-x
    Last edited by iso (2011-02-19 19:21:01)

    java -cp "E:\Java Programmes\class" mygame.server.Server

Maybe you are looking for

  • Why can't I be in a group chat with an android user?

    I have the iphone 5 and I am not able to participant in group chats if there is an android user involved. I will not even see the messages that are sent. For example, there is a group chat with another iphone 5 user, an iphone 4s user, and an android

  • ISight/new intel mini mic problem

    Hi, I've got an iSight camera that I've been using on a just retired eMac. I just purchased a new intel mini and I've been trying to set up ichat. However, the microphone won't work at all on the new computer. The video seems to be ok but no sound. S

  • Account balance different whether stated from FS10N or ZCAL

    Hello everyone, This is a slightly difficult issue I propose to you. This is about an account balance whose value is different whether it is stated from FS10N or stated with an other transaction, ZCAL. After some investigations, the gap comes from th

  • How to open downloads

    How can i view downloads

  • Third-party apps crash on launch: iPad 1 iOS 4.3.5

    I just started experiencing this problem today. I was at meeting taking notes using Evernote, and put my iPad 1 to sleep. An hour later, I tried retrieving my notes, and the app would being to open, but then suddenly closed. It continue to do this, e