Working with Top Secret

Hi,
Has any one worked with Top Secret Resource Adapter , We want to create , delete , modify accounts in OS/390 mainframe (proabaly) in this project.I was anxious to know if these operations are supported by the Top Secret adapter that comes with Sun IdM,in the Res. ref in the supported actions create , delete , update are not mentioned.
Do I need to extend the adapter's functionality , any ideas will be helpful .
how did you do when it was required
Thanks,
pandu

hi ,
i too working with top-secret, i am using the scripted host adaptor for creating, enable, disable,and modify action in top-secret..
basically working with top-secret is screen scraping.. so we need to write all mainframe command in our actions script..
by using this action script we can create ,enable ,disable and modify account in top-secret..
i have one issue here...i also want to create a log file..which will contain the data coming back from mainframe where we can see our passing command and reply back from mainframe..
i am doing this be using host access.get screen() command..
but i am getting only half of the screen back ...means only half of the data of a back screen is displayed in a log file
do any one try this . if u know then plz reply.......

Similar Messages

Shift not working with top and bottom rows of keys

I have an odd thing happening with my Macbook. I tried making a new account, but that didn't fix it. The problem is that when typing, the top rows of keys QWERTYUIOP and the bottom row of letters ZXCVBNM don't type anything when you combine them with the shift key. I'm not sure what happened to cause this or what to do to troubleshoot it. Any ideas would be appreciated.

Any time that you force Windows to stop instead of letting it shut down normally (sometimes you have to shut it off), you may have lost clusters of data that interfere with the proper operation of Windows. So I suggest you start up and run scandisk and make sure you check the box for fixing problems. The other box doesn't need to be checked unless you suspect bad sectors on the hard drive and it takes a long time so I recommend only checking the one box for finding and fixing errors.
Let us know if this worked and the problem is fixed.
Good luck.

I have Firefox 5.0.1, and a theme I want to download says that it works with Firefox 4.0b9pre - 7.0a1, but at the top it says that it is not available for my platform. What do I do?

I just downloaded Firefox 5.0.1, and one of the themes I want to download and try out says that it works with Firefox 4.0b9pre - 7.0a1. At the top, though, it says that the theme is not available for my platform. It has happened with some other themes as well, but I didn't check what versions they work with. I don't know what this means or what to do about it. The theme is at this link: https://addons.mozilla.org/z/en-US/firefox/addon/bloomind-ft-deepdark-2/

It says:
<blockquote>"Bloomind FT DeepDark 2" is a theme that has been created to transform the look of Firefox 4 for Windows users. It has been specially designed for Seven, but rendering is relatively accurate on XP and Linux (I can t test it on MAC, but for those who would like to try it anyway on that platform, you can force download and install it).</blockquote>
So try to save that file via the right-click context menu.
*http://kb.mozillazine.org/Themes

JK Adobe TV - Top 5 Tips for Working with Vectors in CC

Julieanne Kost has just blogged about her Adobe TV video on working with shapes and paths in Photoshop CC. It's actually not that new to Adobe TV, and has already had a lot of views, but we get a lot of questions here on the subject with CC, and there are some nice little tips in it. I certainly learned a couple of things. :-)
http://blogs.adobe.com/jkost/2014/01/top-5-tips-for-working-with-vectors-in-photoshop-cc.h tml
http://tv.adobe.com/watch/the-complete-picture-with-julieanne-kost/top-5-tips-for-working- with-vectors-in-photoshop-cc/

My apologies, but I really had no interest in a member's "answer", especially one that is so unhelpful. Assuming that you were responding to me (we are the only two commenter's at this point), I would not be inclined to read the Creative Cloud offers since this is something that I am not interested in. I bought the product the first day of offer, I did not rent it....just like I have in all the years past.

I have recently installed Mavericks and since then I have been unable to shut down or log out of my mac. I work with two screens and now I seem to have programmes at the top of both screens which I didn't before. any advice?

I have recently installed Mavericks on my desk top and since then I have been unable to switch off my computer without crashing it. I work with two screen and now I seem to have the menu bar on the second screen as well which I did not have before. Can you please help me?

Dr Bettina, I had similar problems with Mavericks. I installed it on a Mini and a 13" MacBook Pro. I can't speak to your disdplay issues, but I can confirm the inability to logout, shut down, or restarft without a forced, power button shut down. I can also report frequent System Prefs freezes and finder issues, like folder contents taking half a minuite or more to render, or not appearing at all. And while a few Adobe CC apps actually ran faster, InDesign ran like molasses uphill in Decemner.
I tried uninstalling or disabling numerous 3rd party apps and pref panes. I unplugged everything but the keyboard, ran DiskWarrier, repaired permissions, did fsck -f, trashed various preference files, reinstalled the OS... You name it, and I tried it — short of a potion using eye of newt.
After two days of totally hosed productivity, I restored OS 10.8.5 on the Mini so I could actually get some work done. However, I've decided to leave Mavericks on the MBP as a sort of crash dummy, and will install and thoroughly test all updates until stability has been achieved. Then — and only then — will I upgrade the Mini to Mavericks, even if it means waiting 'til a .2 or even .3 update.
Good luck to you...

I live in the country and there is no High speed available, How does Firefox for desk top work with Dial up ???

I live in the country and there is no High speed available, How does Firefox for desk top work with Dial up ??? I have a great dell computer, Dimention 8400. Before I install firefox I want to know for no waste of time for either party..

Unless you enabled Find My iPad on it before it was stolen then there isn't any way to locate it. If you did enable it then you could try locating it either via http://icloud.com on a computer or Find My iPhone on another device - but that will only work if it's connected to a network and the device hasn't already been wiped and/or Find My iPad disabled on it.
If it was stolen then you should report it to the police. You should also change your iTunes account password, your email account passwords, and any passwords that you'd stored on websites/emails/notes etc.
If it was never registered to your account then it won't appear on your support profile : https://supportprofile.apple.com/
The only other ways to find it that I know of (apart from on the actual device) are via the packaging, the backup on a computer's iTunes : http://support.apple.com/kb/HT4061

My track pad stopped working with a single finger/double click when I try to open emails, and when I try to open apps on desk top. If I use two fingers, and then click open, I can open them. Thank You for your help.

My track pad stopped working with a single finger/double click when I try to open emails, and when I try to open apps on desk top. If I use two fingers, and then click open, I can open them. Thank You for your help.

Greetings ascnephew8,
It seems your trackpad isn't working as you expect it to. Have you reviewed the trackpad settings in System Preferences? The following article provides trackpad setting details which may help:
OS X Mountain Lion: Change the way your trackpad works
Thank you for contributing to Apple Support Communities.
Best,
Bobby_D

HDV Video isn't as cheap to work with as it appears.

Ya know something folks? I'm reading so many people shooting some flavor of HDV and becoming dissappointed with it for one reason or another.
I think a lot of it comes from the fact that monitoring externally in HD isn't cheap, shooting it isn't much more than quality DV, but editing it isn't. It's a the big buried "secret" the HDV manufacturers aren't publicizing... why? because HD montors and gear to allow for this monitoring to happen can more than double the cost of shooting the stuff.
So I guess I'm saying that if you intend to go to HD, then consider that you have to also upgrade your editing system to work with it properly. Just today I've read 3 posts in this forum about quality issues with HDV files. Every one of these folks are judging the quality of the image in their Canvas... which isn't designed to let you see all the quality you have no matter what the format... Computer displays aren't designed to work with interlaced video either... they can be adpated to do so, but it's a $1,000 price tag on top of the display itself, and it's not optimal because you can't setup a computer display like you can a pro video monitor.... that's another discussion I guess.
DV was an easy jump from VHS in the low end of video. You could use SD monitors for external viewing and you could use a deck or camera to send an analog signal to it.
This can't be done with HDV... And to see what you have going before delivery you HAVE to monitor your video externally. This can EASILY cost another $3,000 or more to do it. Now the answer is simple... SPEND THE MONEY, or trust that it's looks OK. (Trusting it is less expensive, but scary to say the least - I don't recommend it, but it's better than shooting DV and forgetting HD all together I suppose.
A nice LCD HD TV set would be better than naught... but don't forget the cost of the box or capture card to allow a signal to be sent to it... optimally? the real cost of doing this on a professional level starts at about $6,000... Kona card and Panasonic/sony LCD HD pro monitor, and even then, a professional colorist would tell you it's not good enough.
Jerry

Progressive scan looks better on a computer display, but it doesn't correct for the gamma differences between computer displays driven by computer display cards and monitors... meaning the color won't be spot on. So I'd still recommend that if you want to use a computer display, a decent setup for this would be a 23" Cinema Display and Matrox's MXO to drive it with, which does help with the gamma correction.
I recently reviewed this setup for the COW magazine, and it was pretty good... I compared bars on my CRT to the bars shown on the CD, and they were very close after setting up my Cinema Display to match them as close as I could with my old eyes. Still not as optimal no doubt. As the step up from this, which would be a Panasonic LCD, the 17" is OK, but the 26" is better because you can actually see a pixel for pixel display. AND you can setup these monitors with a blue only button like any pro monitor. (you'd still need the Matrox if you don't have an HD capture card).
Setup from that? a Kona 3 card, Which will cross convert any flavor of HD to uncompressed or what have you... And with a mini converter from them, you can also capture HDV as DVCPROHD or uncompressed HD (which would be lossess). Now were talking about $7,000. Even Panasonic will say it's not good enough for "critical" color correction. Sony's LCD HD pro monitors aren't any better don't think, and they not only cost more, but Sony doesn't tout them as being good enough for "critical color correction". They are talking about an improvement here in that price range in the next gen monitors though... we'll see probably by NAB this year.
If you went this way, and wanted the best of the best, you'd also need a fast disk array to work with uncompressed HD. This will set you back another 5k minimum... Told ya, the "hidden" costs of working in HD are indeed pricey...
I'd recommend the Matrox and a 23" CD for anybody doing prosumer or consumer work.. it's good enough for non critical work done for non broadcast. Broadcast starts with the Matrox and the panny LCD... and big time best in the world? Well NOW we're talking an HD CRT. Sony sells them, and the ones large enough for the job are like $35,000!!!!
Ya know, when you work in the "bleeding edge" it's just not cheap.
This will all get less expensive over time, and the sooner it gets there, the better I'd say.
One thing that really gets my goat is the sheer number of digital formats. I think the Japanese have made this such a confusing thing, and it's all for THEIR benefit. Hey, if there was only one flavor of HD, they couldn't sell 10 video machines for each of the high end edit bays out there. They really got hurt when NLE's came of age, and mulitple deck editing systems went the way of the dodo... I think that's why they make so many different formats, so the pro post houses still have to buy a bunch of machines to satisfy the market. Sony's been losing money hand over fist in Pro video, and I think that the market is just fed up with the price tags they ask for their equipment. Panasonic is leading the way with less expensive gear and bonking Sony pretty bad I think. DVCPROHD is good enough for a lot of shows...
In any event it's content that matters the most by far. You can have the prettiest picture imaginable, but if the content of your show isn't compelling, it's gonna fail. Great content even though it's being shown in less than the best picture quality, will win the awards hands down EVERY TIME.
Sorry, I digressed, but I'm just in the "mood" right now.
Jerry

Will the Apple mini DVI to video adapter work with a macbook? What to Buy?

I went to my local Apple Reseller and asked for a mini dvi to video adapter to use to connect my macbook to a tv using either s-video or the yellow RCA cable. I was told that they only had the one that was for an ibook and Power book and that this would not work with a Macbook. I would need a different one. Is this correct. If so, what do I need? I have looked on the online Apple Store and cannot find anything that fits this description. They only list one type of Mini DVI to tv adapter? I just want to be able to connect my Macbook to a TV.

As it happens, I just bought the mini-DVI to video connector for my wife's Macbook (C2D) yesterday. I am in Australia (which is a PAL country), but I didn't see anything on the device or the packaging which indicated it as being PAL-specific. In fact, in Display Preferences when it is connected to the Mac and TV and in use, the panel relating to the TV output (which is shown by the Mac on the TV screen) is where you select between PAL-50Hz and NTSC-60Hz, so I'd guess it is a single worldwide device, rather than their being separately-manufactured PAL and NTSC variants of the connector.
Anyway, on the back of the top cardboard part of the packaging is a picture of the connectors (because you cannot really see the pins in the Mini-DVI connector itself when packaged, due to an opaque plastic "keeper" over the end of the plug).
To reconfirm what is said above, the pin configuration on the mini-DVI port on the MacBook and what you need on the Mini-DVI connector is a horseshoe or "U" shape. I don't remember if any specific model of Mac is listed, but I believe as long as it is that U-shaped connector you'll be fine with the same connector kit.
The "mini-VGA to video" connector is not what you want for a MacBook; mini-VGA is not "U"-shaped inside, but rather two rows of pins in "II" configuration (even though the outside dimensions of mini-VGA and mini-DVI look very similar).
ted.h.
Mac Mini (Pro Duo) and MacBook (C2D) Mac OS X (10.4.8)

How I got my 2011 MacBook Pro (17") to work with the UML290 without any 'hackery'

Frustrated and fed up with waiting for Verizon to finally fully support an operating system that is almost two and a half years old now, I decided to experiment and play around with things myself. Here is what I learned:
For some reason, the "dial your number" network hack that people got working didn't work for me. I set up everything as the tutorials all said (GRPS (GSM/2G), APN to "vzwinternet", dial your phone number, user name is [email protected], password is vzw, CID 3, etc). It just would not work for me. Maybe it's becasue I had my UML290 hooked up to a Windows 7 box that updated the firmware, which may have rendered this 'hack' inept. I don't know; all I know as that, despite trying to get this method to work for several days, I was never able to get it to work.
There was no way, as far as I could see, to force the Verizon Access Manager (VZAM) software to run in 32bit mode as you can with most other programs. Typically, you can hilight a program, press CMD+I and select a checkbox to run an app in 32bit mode, but no such option existed for VZAM (for whatever reason).
Finally, I found a workaround to get the modem working until Verizon gets their act together and makes VZAM work with 64bit OS X. Here's how:
Completely power off your computer.
Depress and hold the "3" key and the "2" key (at the top of your keyboard) at the same time BEFORE pressing the power button.
Press the power button while continuing to hold the "3" key and the "2" key.
Continue to hold the "3" key and the "2" key until the login prompt comes up.
Log in as normal (you may have to remove a bunch of characters from the password field; just CMD+A and delete what's in there and type your password as usual).
After following the steps above, you should have forced your Mac to run in 32bit mode. Run VZAM as normal and you should have no trouble connecting to the 4G/3G network.
Note: This measure is TEMPORARY, and will force OS X to load the 32bit kernel instead of the default 64bit kernel (if your MacBook is set up to use the 64bit kernel by default). This change will be undone at your next restart provided you do not hold down the "3" key and the "2" key.
Note: If you used previously posted "dial-up" methods to get your modem working on your Mac, you will need to undo the 'damage' to your settings that that workaround caused. Please see my post here (post 14) for detailed instructions on how to do so.
Note: This is a temporary solution that carries with it some down sides:
True 64bit support offers higher levels of security than 32bit.
You will likely be unable to use more than 3GB of of memory as a 32bit OS cannot, by nature, address that much RAM.
Please let me know if you have any problems. I can't promise I can help, but I'll do my best.

Hey, it's a simple fix that should give most people what they want until there is full VZW support: the ability to use their card with the VZAM software. I didn't see anyone else offering that suggestion... If you don't want to use it, you don't have to.
At the very least, this does seem to prove the theory that this is an issue with the 32/64bit compatability that some have refuted.

I bought Aperature and PS from a university store, not under my apple username, now it won't let me update it to work with Yosemite because it isn't hooked to my username. how do i fix it and get the upgrade

A few years ago or so i bought Aperture and Photoshop (the whole kit and caboodle) from a university subsidized store (my husband worked there and buying programs like those two, the whole Microsoft office Suite, all kinds of things) at a very significant discount, i think we paid 25$ for Photoshop vs the 400$ it was selling for on the open market.
Yesterday i upgraded most of my laptops to Yosemite (one of them I'm sure was the one that had Aperture on it, a 17in MacBookPro, its about 2 years old now, but at the time i bought it it was the highest computer apple had on the regular floor, I'm sure i could have added some stuff to customize it for extra, but basically we are talking top of the line computer. I recently just required a 2012 MackBook Air with also fairly heavy specs from a family member that was upgrading (I'm not sure why, i know they couldn't possibly be using this thing for anything beyond its capacity, its basically new, and they aren't 3D animation rendering and needed a "quicker" one).
I was very happy with the upgrade, and now it does work much more seamlessly with my iPads and my iPhone, but the whole reason i uploaded it was to work on pictures, adjust them, change the size and then print them out to include in jewelry, and Yosemite won't let me use Aperture at all, when i click to upgrade it (in the bar all it has basically old icon with a (no sign or ghost busters like sign over it) i click on it and it says, you did not buy this with your apple account name and i could not upgrade it. But it just made me click ok, and did not give me any info on how to upgrade it. i do physically own it, or my husband does, I'm not sure to whom it is registered, but sholdnt i still make it able to work with this new operating system, even if not through regular "software updates" it used to always be asking me to upgrade "word" and i got that in the same way, so what is the issue and what do i do to get it to work on this new system?

Wow that was really quick, thank you so much. Im not sure at all which version it was because i said it was around 4 years ago he bought it. I know it isn't under his username, since he's a PC person (ugh) so i know its probably registered to one of our actual names. isn't there some way to look it up since we did register it, because I'm not even sure where the disks are from when we bought it (we've moved a lot and also have two storage lockers, i know i would have kept it with other disks) but my cd rom drive is actually broken on my computer as well ( i think it got stepped on and is now squished and won't eject or run disks.)
So is there anyway they can look up that its registered to one of our names since we did register it when we bought and installed it, or do i really have to find the disk with some sort of proof of purchase (i know there would be no receipt after all this time)
either way, ill do what you suggested to the best of my abilities and thank you so much for answering my questions, i can't even open the program as its incompatible and find out the info from that) so I'm in a bit of a pickle and your response was so thorough and it didn't seem to be posted long enough to even write a well researched response, thanks, all the best,
sarucia

I am unable to get Thunderbird to work with my exchange email account

I have tried a heap of different configurations including using ExQuilla with no success. I will provide the insrtuctions I received for accessing my account using outlook.
I hope you can help, as I find Thunderbird a great platform, and really don't want to go back to Outlook.
*Note – the instruction at step 5 is fairly important. It is easy to miss it and hit “check name”. Don’t – It’ll piss you off no end.
Let me know how you go.
Using Outlook via the Internet
If you are using Microsoft® Office Outlook® 2003, you can connect to the computer running Windows® Small Business Server through the Internet using the feature called RPC over HTTP. This means you can remotely access your server e-mail account from the Internet when you are working outside your organization's firewall. You do not need security-related hardware or software (such as smart cards or security tokens), and you do not have to establish a virtual private network (VPN) connection to the server.
Comparing RPC over HTTP and Outlook Web Access
When using RPC over HTTP to access your mailbox, you get the full functionality of Outlook 2003. For example, you can work offline, use Microsoft Office Word 2003 as your e-mail editor, and easily organize your mailbox.
To use Outlook via the Internet
Ensure that the following requirements have been met on the client computer:
Verify that the computer is running Microsoft Windows XP Service Pack 1 or later
• Click Start, right-click My Computer, and then click Properties.
The version of the operating system and service pack is displayed under System. If you do not see a service pack version, there is no service pack installed.
Verify that Windows update Q331320 is installed on the computer (not required if you are running Windows XP Service Pack 2 or later)
1. Click Start, click Control Panel, and then open Add or Remove Programs.
2. Under Currently installed programs, search for the item Windows XP Hotfix (SP2) Q331320.
3. If the item is not present, go to the Microsoft Web site (http://go.microsoft.com/fwlink/?LinkId=18651) and follow the instructions to download and install it.
Verify that the computer is running Outlook 2003 or later
1. Open Outlook.
2. Click the Help menu, and then click About Microsoft Office Outlook. The version number appears at the top of the box.
Verify that the computer trusts the certificate used by the server
1. Open Internet Explorer, and then in the address bar type:
https://vpn.alaea.asn.au/remote
• If the certificate is trusted, a certificate warning does not appear. In this case, continue with step 1 under Ensure that you have an Outlook profile configured for the server.
• If the certificate is not trusted, a warning appears. Click View Certificate, click Install Certificate, and then follow the instructions.
Ensure that you have an Outlook profile configured for the server
1. Click Start, and then click Control Panel.
• If you are viewing Control Panel in the default Category view, switch to Classic view, and then double-click Mail.
• If you are viewing Control Panel in Classic view, double-click Mail.
2. In the Mail Setup dialog box, click Show Profiles. If your profile appears in the list, select your profile, click Properties, click E-mail Accounts, select View or change existing e-mail accounts, and then click Next. If your profile does not appear, open Outlook and follow the instructions to create a profile before proceeding.
• If Microsoft Exchange Server does not appear in the list, the existing profile is not associated with a Microsoft Exchange Server e-mail account. Click Cancel, and then click Close. Continue with step 3 to add a profile.
• If there is an existing Microsoft Exchange Server profile, continue with step 3 under Configure the computer for RPC over HTTP.
3. Click Add. The New Profile dialog box appears.
4. In the Profile Name box, type a name for the new profile, and then click OK. The E-mail Accounts dialog box appears.
5. Under E-mail, select Add a new e-mail account, and then click Next. The Server Type dialog box appears.
6. Click Microsoft Exchange Server, and then click Next.
7. Continue with step 4 under Configure the computer for RPC over HTTP.
Configure the computer for RPC over HTTP
1. Click Start, and then click Control Panel.
• If you are viewing Control Panel in the default Category view, switch to Classic view, and then double-click Mail.
• If you are viewing Control Panel in Classic view, double-click Mail.
2. In the Mail Setup dialog box, click E-mail accounts, click View or change existing e-mail accounts, and then click Next.
3. In the E-mail accounts dialog box, click Microsoft Exchange Server, and then click Change.
4. In the Microsoft Exchange Server box, type the local name of the Exchange server:
alaea-sbs1.alaea.alaea.asn.au
5. In the User Name box, type the user name that you use to log on to the Remote Web Workplace. Do not click Check Name.
6. In the Exchange Server settings page, click More Settings.
7. On the Connection tab, under Exchange over the Internet, select Connect to my Exchange mailbox using HTTP, and then click Exchange Proxy Settings. The Exchange Proxy Settings dialog box appears.
8. Under Use this URL to connect to my proxy server for Exchange, type the following URL:
vpn.alaea.asn.au
9. Select Connect using SSL only, and then select Mutually authenticate the session when connecting with SSL.
10. In the Principal name for proxy server box, type the following text:
msstd:vpn.alaea.asn.au
11. Select On slow networks, connect using HTTP first, then connect using TCP/IP.
12. Under Proxy authentication settings, select Basic Authentication.
13. Click OK, and then click OK again. Click Next, and then click Finish. Click Close.
14. In the Mail dialog box, if Always use this profile is selected, choose the newly configured profile.
15. Open Outlook and type your Windows Small Business Server user name (in the format ALAEA\user name) and password. You can now work with your Outlook mailbox.

Sheesh. That looks hard. I think it will fall over at this point:
"Connect to my Exchange mailbox using HTTP" 'cos Thunderbird uses only the regular email protocols: POP, IMAP and SMTP.
Here (at work) we have in the past have had IMAP and SMTP enabled on our Exchange server so Thunderbird could then connect just like to any other regular internet-based service.
With the change here to outlook365/outlook 2010 I've had to switch to using DavMail which lets Thunderbird talk to the mail server using OWA.
I haven't (seriously) tried Exquilla. Whilst I have great respect for its author and some of his other add-ons, I saw no reason to use an add-on that required payment when DavMail works for free.

How do I get fios to work with my new desktop w/ Windows Media Center

Can someone please help me I have "fios".TV and internet 1HDSTB + 1HDDVR with multi room dvr Home media mgr.how do I get fios to work with my new desktop HP Pavillion m9715f**(specs below)**w/ Windows Media Center or did I just throw away my money?
also equipted is 47" Samsung 850series 1080p 120hertz HD LCD TV + 36" Samsung 560series 1080p 60hertz HD LCD TV and 19"Samsung 950b LCD Monitor
** computer specs**
Product number NZ017AA
Introduction date 30-Jun-2009
Country/region sold in: United States,Canada
Hardware Base processor
Phenom-9650 (A) 2.3 GHz (95W) 3600 MHz HyperTransport 3.0 Socket, AM2+
Chipset AMD 780G
Motherboard Manufacturer: MSI Motherboard Name: MS-7548 HP/Compaq motherboard name: Aspen-GL8E
Power supply 300W
Memory
Component Attributes Memory Installed 8 GB Maximum allowed 16 GB (4 x 4 GB) (64-bit OS)
4 GB* (4 x 1 GB) (32-bit OS)
*Actual available memory may be less Speed supported PC2-6400 MB/sec Type 240 pin, DDR2
Hard drive750 GB SATA 3G (3.0 Gb/sec)7200 rpm
Blu-ray player & SuperMulti DVD burner with LightScribe Technology drive
This Blu-Ray Disc DVD drive introduces a player that reads Blu-ray Disc format enabling you to watch high-definition Blu-ray Disc movies. NOTE: This drive does not include high-definition write capability.
Formats/Disc types Write speeds Read speeds Storage capacity Blu-ray Disc BD-ROM SL NA up to 6X up to 25 GB BD-ROM DL NA up to 4.8X up to 50 GB BD-R SL not supported up to 6X up to 25 GB BD-R DL not supported up to 4.8X up to 50 GB BD-RE SL not supported up to 2.3X up to 25 GB BD-RE DL not supported up to 2X up to 50 GB HD DVD not supported DVD DVD-ROM SL NA up to 16X up to 4.7 GB DVD-ROM DL NA up to 8X up to 8.5 GB DVD+R SL up to 16X up to 12X up to 4.7 GB DVD+R DL up to 4X up to 8X up to 8.5 GB DVD+RW SL up to 8X up to 10X up to 4.7 GB DVD+RW DL not supported DVD-R SL up to 16X up to 12X up to 4.7 GB DVD-R DL up to 4X up to 8X up to 8.5 GB DVD-RW SL up to 6X up to 10X up to 4.7 GB DVD-RW DL not supported DVD-RAM up to 5X up to 5X up to 4.7 GB CD CDROM NA up to 40X up to 700 MB CDR up to 40X up to 40X up to 700 MB CDRW up to 24X up to 40X up to 700 MB CD-DA NA up to 32X up to 700 MB Video CD NA up to 10X up to 700 MB
Wireless Wireless LAN 802.11 b/g
Video Graphics Radeon HD4350
512 MB DDR2 memory
I/O Ports: HDMI, VGA, single-link DVI
Television Hauppauge ATSC/NTSC TV tuner card with FM tuner
Sound/Audio High Definition 8-channel audio
ALC 888S chipset
Network (LAN) Integrated 10/100/1000 Base-T networking interface
Memory card reader
Contains an Infrared receiver for remote control
Supports the following cards:
Compact Flash I
Compact Flash II
IBM Microdrive
Secure Digital (SD)
mini-SD
MultiMediaCard (MMC)
Reduced size MultiMediaCard (RS-MMC)
MultiMediaCard Plus (MMC plus)
MultiMediaCard Mobile (MMC mobile)
Memory Stick
Memory Stick Pro
Memory Stick Duo
Memory Stick Pro Duo
SmartMedia
xD Picture Card (xD = extreme digital)
External I/O ports
I/O ports on the front panel
Port type Quantity 15-in-1 (4 slot) with IR Receiver One USB Two Headphone One Microphone One Audio L-R One S-video in One Composite video in One
I/O ports on the back panel
Port type Quantity PS/2 (keyboard, mouse) Two S/PDIF out (coaxial) One VGA One (disabled due to the installation of a graphics card) DVI-D One USB Four 1394a One LAN One Audio (side speaker out, rear speaker out, center/subwoofer-out , line-in, line-out, microphone) One Each
Expansion slots
Slot type Quantity PCI Express x16 One (None available) PCI Express x1 Three (Two available)
Drive bays
Bay type Quantity 5.25" Two (One available) 3.5" Two (One available) Personal Media Drive One (One available) Pocket Media Drive One (One available)
Keyboard and mouse HP multimedia keyboard HP PS/2 optical mouse
Remote Control USB infrared remote control,Remote control expansion card with IR ports,IR emitter cable to transmit codes to a set top box

Based on what you've posted, your computer does not have the right tuner. You need a QAM tuner to record locals from FiOS, or a CableCard tuner to record all local and cable channels from FiOS.
QAM tuners to record local channels only
This requires Windows Vista or Windows 7
Hauppauge WinTV-HVR-2250
SiliconDust HDHomeRun (info on a sale)
CableCard tuner to record local and cable channels
This requires Windows 7 + one CableCard from Verizon for $3.99/mo
ATI TV Wonder Digital PC CableCard Tuner (records one channel at a time) -- $200-$250 on ebay
Ceton MOCUR tuner (records four channels at a time) -- coming in early 2010 for $400-$600
Make sure your computer has Windows 7 Home Premium (or better) installed. That's necessary to support CableCard tuners.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.

AIR-LAP1242G-E-K9 do not work with AIR-CT5508-K9 while AIR-LAP1142N-E-K9 do

Hello,
we do have a site where we need to deploy AIR-LAP1142N-E-K9 and AIR-LAP1242G-E-K9 APs. We have two AIR-CT5508-K9 controllers with SW version                  6.0.188.0.
AIR-LAP1142N-E-K9s work okay, as expected, we do not have any problems with them.
However AIR-LAP1242G-E-K9s do not, there is a problem with establishing CAPWAP tunnel with the controller.The AP is seen on the controller for a while, with 0 time up-time, cannot change any settings on the AP via controller, and after a while it disapears from the controller, apears again and this repeats.
The APs and controllers are connected to the LAN campus.
Controllers via two 1G links configured as Etherchannel to WS-C6506-E VSS switch with s72033-ipservicesk9_wan-vz.122-33.SXI1.bin on it.
APs to WS-C3750G-48PS with c3750-ipbasek9-mz.122-50.SE2.bin on it. 3750 is connected to the C6505 via two 1G links configured as Etherchannel.
Below I copied the log I captured on 1242 and the controller. Highlighted ones are the ones which I think might bring a clue.
I performed some troubleshooting steps.
- As we have some other controllers available over WAN, I tested the 1242 AP with 2100, 4400 and also with the same model AIR-CT5508-K9 with SW version                  6.0.188.0 over WAN and this worked always okay.
- I wanted to be sure that I eliminate any kind of out of sequence packet issue, so I brought down all redundancy L2 links so that the L2 path from the AP to the controller was only through one leg links.
- I also brought the second controller down to eliminate potential issue with having two of them up.
- The AP gets its IP from DHCP configured on the C6506 switch, I am always able to ssh to AP, so the IP connectivity does not seem to be an issue.
- I have more 1242s, all behave in the same way. I also connected them to some other 3750 switches we have in the campus, always the same.
- As this seems to be maybe a kind of ssl issue, I tried to play with controller settings, like enabling Accept... options under Security/AP Policy,but this did not help.
- I also tried to reboot the controller, no improvement.
- The APs came from the factory, so in the beginning everything was factory default in them. They were always able to download the image from the controller in the very initial phase. I still do have some of them untouched, so I can perform any troubleshooting steps with the fresh one.
I can reproduce this, can also send debugging logs if needed.
Any idea on what could be wrong is highly appreciated.
Thank you.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
This Discussion has been converted into document:- https://supportforums.cisco.com/docs/DOC-23054
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
AIR-LAP1242G-E-K9 10.0.13.28 log
*Mar 1 00:00:05.922: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed
*Mar 1 00:00:07.536: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot1 1Radio 0
*Mar 1 00:00:07.672: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP event log (contains, 304 messages)
*Mar 1 00:00:09.809: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up
*Mar 1 00:00:09.874: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1240 Software (C1240-K9W8-M), Version 12.4(21a)JA2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Mon 02-Nov-09 18:42 by prod_rel_team
*Mar 1 00:00:09.874: %SNMP-5-COLDSTART: SNMP agent on host wuen4028 is undergoing a cold start
*Mar 1 00:00:09.964: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Mar 1 00:00:09.967: bsnInitRcbSlot: slot 1 has NO radio
*Mar 1 00:00:10.191: %SSH-5-ENABLED: SSH 2.0 has been enabled
*Mar 1 00:00:10.191: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:00:10.430: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar 1 00:00:10.818: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up
*Mar 1 00:00:11.212: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar 1 00:00:18.315: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned DHCP address 10.0.13.28, mask 2 55.255.255.0, hostname wuen4028
*Mar 1 00:00:28.988: Logging LWAPP message to 255.255.255.255.
*Mar 1 00:00:31.456: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
*Mar 1 00:00:31.495: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:00:32.457: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Mar 1 00:00:32.457: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255.255 started - CLI initiated
*Mar 1 00:00:38.810: %CAPWAP-3-ERRORLOG: Did not get log server settings from DHCP.
*Mar 1 00:00:47.811: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER
*Mar 1 00:00:56.812: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-LWAPP-CONTROLLER
*Mar 1 00:01:07.815: %CAPWAP-3-ERRORLOG: Selected MWAR 'wuen4001'(index 0).
*Mar 1 00:01:07.815: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Feb 11 07:52:24.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.0.13.5 peer_port: 5246
*Feb 11 07:52:24.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
*Feb 11 07:52:25.441: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.0.13.5 peer_port: 5246
*Feb 11 07:52:25.443: %CAPWAP-5-SENDJOIN: sending Join Request to 10.0.13.5
*Feb 11 07:52:25.443: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
*Feb 11 07:52:25.445: %CAPWAP-3-ERRORLOG: Unencrypted non-discovery CAPWAP Control Message from 10.0.13.5
*Feb 11 07:52:25.445: %CAPWAP-3-ERRORLOG: Invalid AC Message Type 4.
*Feb 11 07:52:25.445: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
*Feb 11 07:52:25.445: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 10.0.13.5
*Feb 11 07:52:30.441: %CAPWAP-5-SENDJOIN: sending Join Request to 10.0.13.5
*Feb 11 07:52:30.442: %CAPWAP-3-ERRORLOG: Unencrypted non-discovery CAPWAP Control Message from 10.0.13.5
*Feb 11 07:52:30.443: %CAPWAP-3-ERRORLOG: Invalid AC Message Type 4.
*Feb 11 07:52:30.443: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
*Feb 11 07:52:30.443: %CAPWAP-3-ERRORLOG: Failed to process unencrypted capwap packet from 10.0.13.5
*Feb 11 07:52:47.644: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
*Feb 11 07:53:23.999: %DTLS-5-SEND_ALERT: Send WARNING : Close notify Alert to 10.0.13.5:5246
*Feb 11 07:53:24.000: %CAPWAP-3-ERRORLOG: Selected MWAR 'wuen4001'(index 0).
*Feb 11 07:53:24.000: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Feb 11 07:52:24.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.0.13.5 peer_port: 5246
*Feb 11 07:52:24.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
*Feb 11 07:52:24.001: %DTLS-5-PEER_DISCONNECT: Peer 10.0.13.5 has closed connection.
*Feb 11 07:52:24.001: %DTLS-5-SEND_ALERT: Send WARNING : Close notify Alert to 10.0.13.5:5246
*Feb 11 07:52:24.002: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 3 combination.
*Feb 11 07:52:24.123: %CAPWAP-3-ERRORLOG: Dropping dtls packet since session is not established.
wuen4028#
AIR-CT5508-K9 10.0.13.5 log
*Feb 11 09:00:54.824: %DTLS-3-HANDSHAKE_FAILURE: openssl_dtls.c:2171 Failed to c
omplete DTLS handshake with peer 10.0.13.28
                                           *Feb 11 08:59:53.798: %DOT1X-3-MAX_EA
P_RETRIES: 1x_auth_pae.c:2862 Max EAP identity request retries (3) exceeded for
client 00:1f:3b:93:dd:4f
*Feb 11 08:59:51.197: %DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:2862 Max EAP ident
ity request retries (3) exceeded for client 00:c0:a8:e1:b1:71
--More-- or (q)uit
*Feb 11 08:59:21.212: %RRM-3-RRM_LOGMSG: rrmChanUtils.c:292 RRM LOG: Airewave Di
rector: Could not find valid channel lists for 802.11bg
*Feb 11 08:58:39.766: %DTLS-3-HANDSHAKE_FAILURE: openssl_dtls.c:2171 Failed to c
omplete DTLS handshake with peer 10.0.13.28
                                           *Feb 11 08:57:06.131: %RRM-3-RRM_LOGM
SG: rrmChanUtils.c:292 RRM LOG: Airewave Director: Could not find valid channel
lists for 802.11bg
*Feb 11 08:56:24.504: %DTLS-3-HANDSHAKE_FAILURE: openssl_dtls.c:2171 Failed to c
omplete DTLS handshake with peer 10.0.13.28
                                           *Feb 11 08:55:09.693: %DOT1X-3-MAX_EA
P_RETRIES: 1x_auth_pae.c:2862 Max EAP identity request retries (3) exceeded for
client 00:1f:3b:93:dd:4f
*Feb 11 08:54:51.040: %RRM-3-RRM_LOGMSG: rrmChanUtils.c:292 RRM LOG: Airewave Di
rector: Could not find valid channel lists for 802.11bg
*Feb 11 08:53:56.493: %DOT1X-3-MAX_EAP_RETRANS: 1x_ptsm.c:426 Max EAP retransmis
sions exceeded for client 00:1f:3b:93:dd:4f
*Feb 11 08:53:34.497: %DTL-3-OSARP_DEL_FAILED: dtl_arp.c:1380 Unable to delete a
n ARP entry for 10.0.13.28 from the operating system. ioctl operation failed
*Feb 11 08:52:35.936: %RRM-3-RRM_LOGMSG: rrmChanUtils.c:292 RRM LOG: Airewave Di
rector: Could not find valid channel lists for 802.11bg
*Feb 11 08:52:26.492: %DOT1X-3-MAX_EAP_RETRANS: 1x_ptsm.c:426 Max EAP retransmis
sions exceeded for client 00:1f:3b:93:dd:4f
*Feb 11 08:50:07.680: %DOT1X-3-MAX_EAP_RETRANS: 1x_ptsm.c:426 Max EAP retransmis
sions exceeded for client 00:1f:3b:93:e6:57
*Feb 11 08:48:37.458: %DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:2862 Max EAP ident
ity request retries (3) exceeded for client 00:1f:3b:93:e6:57
*Feb 11 08:47:37.438: %DOT1X-3-MAX_EAP_RETRANS: 1x_ptsm.c:426 Max EAP retransmis
sions exceeded for client 00:1f:3b:93:e6:57
*Feb 11 08:47:34.438: %DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:2862 Max EAP ident
ity request retries (3) exceeded for client 00:16:44:1d:0f:53
*Feb 11 08:46:32.422: %DOT1X-3-MAX_EAPOL_KEY_RETRANS: 1x_ptsm.c:407 Max EAPOL-ke
y M3 retransmissions exceeded for client 00:16:44:1d:0f:53
*Feb 11 08:46:06.790: %DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:2862 Max EAP ident
ity request retries (3) exceeded for client 00:1f:3b:95:61:bd
*Feb 11 08:46:06.789: %DOT1X-3-ABORT_AUTH: 1x_bauth_sm.c:447 Authentication abor
ted for client 00:1f:3b:95:61:bd
*Feb 11 08:46:06.210: %DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:2862 Max EAP ident
ity request retries (3) exceeded for client 00:1f:3b:93:e6:57
*Feb 11 08:45:34.304: %DOT1X-3-MAX_EAP_RETRIES: 1x_auth_pae.c:2862 Max EAP ident
ity request retries (3) exceeded for client 00:1f:3b:95:61:bd
*Feb 11 08:45:34.303: %DOT1X-3-ABORT_AUTH: 1x_bauth_sm.c:447 Authentication abor
ted for client 00:1f:3b:95:61:bd
*Feb 11 08:45:01.298: %RRM-3-RRM_LOGMSG: rrmChanUtils.c:292 RRM LOG: Airewave Di
rector: Could not find valid channel lists for 802.11bg
*Feb 11 08:44:38.076: %SIM-3-PORT_UP: sim.c:9547 Physical port 2 is up!.
*Feb 11 08:44:38.037: %SIM-3-PORT_UP: sim.c:9547 Physical port 1 is up!.
--More-- or (q)uit
*Feb 11 08:44:38.009: %SYSTEM-3-FILE_READ_FAIL: nvstore.c:422 Failed to read con
figuration file 'cliWebInitParms.cfg'
*Feb 11 08:44:37.980: %SYSTEM-3-FILE_READ_FAIL: nvstore.c:422 Failed to read con
figuration file 'rrcEngineInitParms.cfg'
*Feb 11 08:44:37.980: %CNFGR-3-INV_COMP_ID: cnfgr.c:2105 Invalid Component Id :
Unrecognized (81) in cfgConfiguratorInit.
*Feb 11 08:44:37.928: %SYSTEM-3-FILE_READ_FAIL: nvstore.c:422 Failed to read con
figuration file 'rfidInitParms.cfg'
*Feb 11 08:44:37.915: %SYSTEM-3-FILE_READ_FAIL: nvstore.c:422 Failed to read con
figuration file 'dhcpParms.cfg'
*Feb 11 08:44:37.903: %SYSTEM-3-FILE_READ_FAIL: nvstore.c:422 Failed to read con
figuration file 'bcastInitParms.cfg'
*Feb 11 08:44:37.834: %SYSTEM-3-FILE_READ_FAIL: nvstore.c:422 Failed to read con
figuration file 'rrmInitParms.cfg'
*Feb 11 08:44:27.331: %SYSTEM-3-FILE_READ_FAIL: nvstore.c:422 Failed to read con
figuration file 'apfInitParms.cfg'
*Feb 11 08:44:27.226: %MM-3-MEMBER_ADD_FAILED: mm_dir.c:903 Could not add Mobili
ty Member. Reason: IP already assigned, Member-Count:1,MAC: 00:00:00:00:00:00, I
P: 0.0.0.0
*Feb 11 08:44:27.023: %SYSTEM-3-FILE_READ_FAIL: nvstore.c:422 Failed to read con
figuration file 'mmInitParms.cfg'
*Feb 11 08:44:27.013: %SYSTEM-3-FILE_READ_FAIL: nvstore.c:422 Failed to read con
figuration file 'aaaapiInitParms.cfg'
*Feb 11 08:44:27.011: %SYSTEM-3-FILE_READ_FAIL: nvstore.c:422 Failed to read con
figuration file 'pemInitParms.cfg'
*Feb 11 08:44:26.898: %SYSTEM-3-FILE_READ_FAIL: nvstore.c:422 Failed to read con
figuration file 'dot1xInitParms.cfg'
*Feb 11 08:44:26.868: %SYSTEM-3-FILE_READ_FAIL: nvstore.c:422 Failed to read con
figuration file 'capwapInitParms.cfg'
*Feb 11 08:44:26.718: %SYSTEM-3-FILE_READ_FAIL: nvstore.c:422 Failed to read con
figuration file 'spamInitParms.cfg'
*Feb 11 08:44:25.650: %SSHPM-3-FREAD_FAILED: sshpmlscscep.c:1395 Error reading f
ile /mnt/application/lscca_pem.crt
*Feb 11 08:44:06.435: %SYSTEM-3-FILE_READ_FAIL: nvstore.c:422 Failed to read con
figuration file 'sshpmInitParms.cfg'

Thanks for such quick response and suggestions.
Yes, I seem not to to be 100% perfect as for the list of troubleshooting steps I took.
I had already tried the two commands you mentioned. I tried again, this time with some other 1242, but these do not help.
Yes, I was already thinking that this could be in theory a licensing issue. The controller is bougth with 25 licenses.
In the beginnign I had one 1142 on it and tried to enable 1242s which did not work. Now I have five 1142s on it, as this worked okay, I guess it could not be a licensing issue.
I think that I can see in the log files that the machines communicate to each other, L2 or L3 paths seem to be working okay. I forgot to mention that I am using option 43 on the DHCP server, so the AP clearly finds its way to the controller. What's more both APs and the controllers are in the same VLAN, so they are in the same broadcast domain.
Below is sho ver from the AP. The AP seems to have Certificate type - manufacture installed, so I guess there should not be a problem with the certificate, especially knowing that the AP works with other controllers over WAN.
My guess these messages seen on AP especially "Invalid event 38 & state 3 combination" might tell us what's wrong.
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman";
mso-ansi-language:#0400;
mso-fareast-language:#0400;
mso-bidi-language:#0400;}
*Feb 11 07:52:24.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
*Feb 11 07:52:24.001: %DTLS-5-PEER_DISCONNECT: Peer 10.0.13.5 has closed connection.
*Feb 11 07:52:24.001: %DTLS-5-SEND_ALERT: Send WARNING : Close notify Alert to 10.0.13.5:5246
*Feb 11 07:52:24.002: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 3 combination.
*Feb 11 07:52:24.123: %CAPWAP-3-ERRORLOG: Dropping dtls packet since session is not established.
Cisco IOS Software, C1240 Software (C1240-K9W8-M), Version 12.4(21a)JA2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Mon 02-Nov-09 18:42 by prod_rel_team
ROM: Bootstrap program is C1240 boot loader
BOOTLDR: C1240 Boot Loader (C1240-BOOT-M) Version 12.4(13d)JA, RELEASE SOFTWARE (fc2)
AP9caf.ca00.1c78 uptime is 17 minutes
System returned to ROM by power-on
System image file is "flash:/c1240-k9w8-mx.124-21a.JA2/c1240-k9w8-mx.124-21a.JA2"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AIR-LAP1242G-E-K9    (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory.
Processor board ID FCZ135082GH
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
LWAPP image version 6.0.188.0
1 FastEthernet interface
1 802.11 Radio(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 9C:AF:CA:00:1C:78
Part Number                          : 73-11479-01
PCA Assembly Number                  : 800-30493-01
PCA Revision Number                  : A0
PCB Serial Number                    : FOC13484GYY
Top Assembly Part Number             : 800-29589-03
Top Assembly Serial Number           : FCZ135082GH
Top Revision Number                  : A0
Product/Model Number                 : AIR-LAP1242G-E-K9
Configuration register is 0xF
AP9caf.ca00.1c78#

Full screen auto-hide feature does not work with Adobe Acrobat Reader add-on 11.0.0.379 in Firefox 17.01.

"Full screen" menu item and its keyboard short cut F11 stop working with Acrobat Reader. The Firefox top edge border does not hide once you have moved around in the Acrobat document. Therefore it is not possible to display PDF documents in a true full screen mode within Firefox. The auto-hide full screen mode works nicely with other Firefox windows, so apparently the Acrobat Reader add-on breaks the feature. Windows 7 64-bit.

From the JS API Reference of the print method:
Non-interactive printing can only be executed during batch, console, and menu
events.
Outside of batch, console, and menu events, the values of bUI and of interactive are ignored
and a print dialog box will always be presented.

Working with Top Secret

Similar Messages

Maybe you are looking for