Working with two images
I'm working through "Apple Pro Training Series: Aperture 3". In the book it claims that I can rotate two images at the same time, but I can't get it to work.
First I select the two images:
Then I hit the ] key, but only one of the images rotates:
Do you have *primary only set* ? If so only the primary selection of a multi-selection is acted on.
Similar Messages
-
How can I work with two images at the same time?
I have downloaded Photoshop Elements 10 and I can not find the buttons for Minimize or Reset for the image. If I rightclick the miniature those options are grey. If I open two images so I have two miniatures in the holder and then go to Windows and Images the option Show Overlapping is grey but I can show Side by side. Then I can only shut down the images.
Thanks for help
BibbiOpen the Editor and on the menu bar click:
Edit à Preferences à General
Check the box “Allow Floating documents in Full Edit Mode” and click OK.
-
Is there a way to work with two or more app at the same time on iPhone or iPad
Is there a way to work with two or more app at the same time on iPhone or iPad?
What i am attempting to achieve is to work with at least two app at the same time. For example: select any picture from my albums to attach them in an email. Another example is get data from an app to use it with the calc app. And there are more exaples for it. And for sure I need support for an iPad air. I mencioned the other tablet just to try to be a bit clearer.
-
Can you setup handoff to work with two mac computers on the same network?
I am attempting to setup handoff to work with two computers on the same network. I cannot seem to get it to work. Should I be able to?
I'm not sure but I haven't seen anything on the Apple site that indicates that it would not work. The following troubleshooting documents may help: Get help using Continuity with iOS 8 and OS X Yosemite - Apple Support
Note in particular the Mac models supported. The other thing that occurs to me is that in addition to being on the same network they would have to be within Bluetooth range of each other. -
Apex mixes applications working with two windows at the same time
Hi all, while developing in Apex I have found the following problem:
Working with two different applications at the same time, the browser goes from one to another indistinctly.
To reproduce the problem:
1. Open the same application builder in two different Firefox windows
2. Open a different application in each window (In my case: application 103 in window1 and application 105 in window2)
3. Go to shared components in both windows (window1 first)
- window1 breadcrumbs show: Home > Application Builder > Application 103 > Shared Components
- window2 breadcrumbs show: Home > Application Builder > Application 105 > Shared Components
4. Click in any shared component in window1 (Templates, Authentication Schemes...)
- window1 breadcrumbs show: Home > Application Builder > Application *105* > Shared Components > Templates (Application 105 instead of 103)
Is it a bug? I have read the known issues [[Here]|http://www.oracle.com/technetwork/developer-tools/apex/downloads/apex402knownissues-189793.html] but it does not appear.
Related Data:
Application Express version 4.0.2.00.07
Firefox 3.6.15
SO: Windows XP
The error is not reproduced with IE7. I have not tested any other browser.
Regards,
MolinaIf you tried opening up two pages in the same application each of which modifies the same page items, you would notice the same issue.
This is because, in a session there is only one set of values for page items(or application items) and every parallel call to the same page would update the same bind variables.
Now the development environment or Apex Builder is also an apex application , and when try and open up the pages as you mentioned, they both access the same Application Builder page and sets/resets any existing values for those variables(and maybe cookies too if they are being used) , hence the 'mixing up'.
If that didn't convince you, check the URL of both the pages when you load them, they should show the same page number ( f?p=APP_ID:PAGE_NUMBER syntax). Imagine if the same approach was done with one of your application pages, say an edit form opened from a report with multiple records in multiple tabs like what happened with this case: {message:id=9346663}
So this really isn't a bug in a way, because that is how session states in apex is/was maintained. Ofcourse if they used another kind of development platform for building pages, it may have been avoided, but thats an altogether different point in itself. -
I have recently installed Mavericks on my desk top and since then I have been unable to switch off my computer without crashing it. I work with two screen and now I seem to have the menu bar on the second screen as well which I did not have before. Can you please help me?
Dr Bettina, I had similar problems with Mavericks. I installed it on a Mini and a 13" MacBook Pro. I can't speak to your disdplay issues, but I can confirm the inability to logout, shut down, or restarft without a forced, power button shut down. I can also report frequent System Prefs freezes and finder issues, like folder contents taking half a minuite or more to render, or not appearing at all. And while a few Adobe CC apps actually ran faster, InDesign ran like molasses uphill in Decemner.
I tried uninstalling or disabling numerous 3rd party apps and pref panes. I unplugged everything but the keyboard, ran DiskWarrier, repaired permissions, did fsck -f, trashed various preference files, reinstalled the OS... You name it, and I tried it — short of a potion using eye of newt.
After two days of totally hosed productivity, I restored OS 10.8.5 on the Mini so I could actually get some work done. However, I've decided to leave Mavericks on the MBP as a sort of crash dummy, and will install and thoroughly test all updates until stability has been achieved. Then — and only then — will I upgrade the Mini to Mavericks, even if it means waiting 'til a .2 or even .3 update.
Good luck to you... -
I bought my macbook pro on August 2011 at an apple store, with the Intel i7. However mirrorring in not working with two of my Apple TVs. These Apple TVs are 2nd and 3rd generation loaded with the latest software. I can succesfully transmit from my itunes on my Macbook pro to both Apple TVs, but I can not see the airplay icon on the taskbar. Can someone help?
About AirPlay and Airplay Mirroring
AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). For non-qualifying Macs you can try using Air Parrot.
Several Apple Articles Regarding AirPlay
Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
How to set up and configure AirPort Express for AirPlay and iTunes
About AirPlay Mirroring in OS X Mountain Lion
iTunes 10- About playing music with AirPlay
Troubleshooting AirPlay and AirPlay Mirroring
Using AirPlay -
Works with two component iu in the same PDA
HI:
I have two componentes IU in Mobile 7.1 patch07 for handhelds.
I need to access a view from one componente iu to another view of another componente iu.
Can I work with two componet iiu n the same PDA and have communication from one to another?
Best Regards.
Maria ElenaHI:
There any way to configure the main menu of SAP Mobile 7.1 where you have applications that are deployed in the PDA?
De esta manera podría crear más de un componente dentro de una aplicación y poder tener más de un link en el menu principal
Best regards
Maria Elena -
Why does final cut x not recognize the sharp PN- K321 monitor ( European version ) as output video monitor, and premiere yes?
Working with two cinema display and PN- K321 and I can not preview the output video at 4K by DisplayPort, whereas with premiere and after effects I have no problemsLook, you can build an HD DVD with an SD movie, just as you can build an SD DVD with an HD movie. This is not a bug, it is most likely user error. Apple will not be addressing it.
Just start over, and ensure you are building an SD DVD by bringing up the inspector for the disc (click on the background in the Graphical tab).
Make sure SD DVD is selected:
(If you do the same thing on your ill fated project, you'll see that HD DVD is selected)
Build your DVD and you'll be fine.
Patrick
P.S. You will need to google HD DVD and Blu-Ray if you want to understand the difference between the formats. The reason that DVDSP included HD DVD was that its format was similar to SD DVD's. Blu-Ray is something else entirely. -
trying to cut away from one video clip to a second one, while keeping the original sound track, works with still images imported from iPhoto, but cant get the video to drag/drop. please help thanks
simonjacobson wrote:
Drag clip over target, green plus sign appears.........clip appears at front of video, no menu option appears,
OK that sounds correct. Just to clarify, when the sign appears, as you release the mouse button (or whatever you are using), no menu pops up but the clip immediately positions itself:
at the front of the target clip, OR
at the very beginning of your project
Not sure where I'm heading here, just trying to get the complete picture.
I di it once, but not again, do i need to double click/right click or something?
No, there is no double-click or right-click involved at all. Just drag and drop, then select from the pop-up menu. You should be able to repeat this with no issues. I've also tested dropping video onto a still picture - the cutaway works on that as well.
Something is definitely not working correctly - strange! Quit iMovie, then try deleting the preference file as I described in my last post. Quitting and relaunching iMovie might even fix it. Also, try restarting your Mac - that sometimes helps.
John -
Crash While Working With an Image Sequence
So I am working with an image sequence in my timeline and every time I touch that clip (either to render it or move it) Premiere crashes.
I am working on an iMac with 32 GB of Ram with OS X 10.10.3 installed. I recently upgraded from Premiere Pro CS6 to CC and since
then I am unable to work with it.
Here is the error log I keep getting:
Process: Adobe Premiere Pro CC 2014 [839]
Path: /Applications/Adobe Premiere Pro CC 2014/Adobe Premiere Pro CC 2014.app/Contents/MacOS/Adobe Premiere Pro CC 2014
Identifier: com.adobe.AdobePremierePro
Version: 8.2.0 (8.2.0)
Code Type: X86-64 (Native)
Parent Process: ??? [1]
Responsible: Adobe Premiere Pro CC 2014 [839]
User ID: 501
Date/Time: 2015-04-18 16:36:11.311 -0700
OS Version: Mac OS X 10.10.3 (14D136)
Report Version: 11
Anonymous UUID: 06821F38-EC27-D4F0-775A-7CB2D2257EE6
Time Awake Since Boot: 3900 seconds
Crashed Thread: 24 Dispatch queue: opencl_runtime
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000008It seems to happen when I am not using any tools. When I have a photo open for any purpose.
It occurs with no input. I fix it by zooming back to where I was.
I am not working with a tablet. I am not working with a mouse.
I will need to look up these preferences. I did not know they existed.
Thanks.
Duane -
Hey guys, got a new question for you. I'm working with grey images from an old newspaper in the 40's in photoshop, originally the format was working gray - dot gain 20%. My question is since this is a gray image with no cmyk to be found, what would you suggest would be the ideal format so that when these images are sent to the printer they will come out looking good? Thanks in advance guys.
JasonWhat I'm doing for JPEGs:
72 ppi at current size
144 ppi at half size
215 ppi at 1/3 size
288 ppi at 1/4 size
and even lower if I can get the images that small, but these are intended for a small brochure so I figure they will be okay at around 1 inch wide per placed image in indesign. -
Working with two or more tables in Numbers
Working with two or more tables in Numbers
It is possible to write numbers or names in Table 1 B-2, B-3, B-4, B-5, B-6 etc. and automatically copy in Table 2 only B-2, B-4, B-9, B23 etc.
What do I need to do???
Thanks for the helpThe table on the left is named "Source" and on the right "Destination":
In the table "Destination" on the right:
B2=Source :: B2
select B2 and fill down -
I am working with two computers in my profession (Mac/PC). I want to download testversions, lets say Premiere Elements 13, for Mac and PC using my adobe login. Is this possible?
Sure. Elements is cross-platform, anyway.
Mylenium -
When working with aRGB images, what changes must be made when printing?
Working in the Adobe RGB color space requires that all components in the chain (camera, software, monitor, printer) be able to handle aRGB. When printing from Photoshop Elements, what changes (if any) need to be made at printing time?
Thanks Michel.
I knew about the "more options" dialog box and use it regularly to set
ICC profiles for my Canon Pro9500 Mark II printer, ensuring also that
"Photoshop Elements manages colors". I could have asked the question
better perhaps: "When working with aRGB images, how can I set both an
ICC printer profile for a specific paper and ensure that printer uses
the aRGB color space?". As far as I can tell, you can set an aRGB
profile (either in Photoshop or at the level of the printer), but you
can't use both the aRGB profile and an ICC paper profile at the same
time. I am assuming that you can't set an ICC profile for the paper in
Photoshop Elements and at the same time use the printer's aRGB driver.
Is that right?
Craig.
Maybe you are looking for
-
Open Dialog box on button click using Visual Webpart
Hi, I am trying to create New Item,Edit Item & Delete Item button in Visual web part.On clicking on the button it should open the corresponding custom form on dialogue box.I don't want to create any button in the ribbon.I just want to create UI page
-
ADF & Spring: Application Module
Hi! Im testing a mix of ADF and Spring. I create an Bean in the Spring Context that is an ApplicationModule <bean id="myAM" class="oracle.jbo.client.Configuration" factory-method="createRootApplicationModule"> <constructor-arg><value>mypkg.myAM</valu
-
Hello, i am trying to setup an AP521 in Standalone mode using CCA. But i am prompted to give a username and password. Do somebody knows ???????? I've checked every where on Cisco website with no result. Thanks for your help
-
Whats a good tutorial site for starting with Flash?
I have searched far and wide all over the internet and I can't seem to find any good tutorial sites on how to make nice text animations, example, making something sparkle, or making the text spin. If any of you could help it would be appreciated imme
-
Migrating schemas - Different tablespace names on source and destination
Hi, I am migrating database schemas with exp/imp from 8i on Solaris to 9i on Linux and also from one 9i on Linux to another 9i on another Linux machine. The tablespaces and schemas (empty) already exist in the destination, so the schemas now need to