Working with User-Defined

What do it event is used to capture the action later of inserted a data on Database?
Thanks

You can use formated search to catch events on a user defined field. You should n't try to create SQL triggers by yourself.
To do a formated search you must create a new SQL query in the Query Editor then save it under s name. Then you go on your UDF and press shift + Alt + F2 and follow the process. Select 'Search By Saved Query' option then choose your query from the list. Check the box 'Auto Refresh when field change', select the right field in your combo box. That should do it.

Similar Messages

Working with user-defined forms in SBO

Hi, newby here.
What is the right way to work with userdefined-forms in SBO?
My add-on adds a button to a system-form (when it is loaded).
User presses the new button, and the following code is executed:
- LoadFromXML("MyForm.xml") ( like the sample code)
- oForm = SBO_Application.Forms.Item("SBOFormEditor_11")
- oForm.visible = true
The user-form is displayed
User presses the OK button on the new user-form, which triggers
- oForm.close()
This works. But a possible disadvantage may be that the form is loaded from XML, each time the user clicks the new button on the system-form.
I would prefer to load the form once, upon starting the add-on. And then display or hide it, by simply turning the oForm.visible-switch on and off. So, when user clicks the OK button: oForm.visible = false.
The problem here is that when the user clicks the close-form button (X), the new form seems to be gone/destroyed/removed.
So, when the user clicks the new button, I need to know how the user exited the new form previously:
If user clicked OK, then I can set the oForm.visible switch on,
but if the user had closed the form, I need to re-load it from XML.
In my experience, if a solution is not pretty, there is usually a better one. But then again...beauty is in the eye of the beholder.
Any comments, or better alternatives, would be appreciated.
Thanks
Erwin

Hi Erwin,
Welcome to the forum.
I don't think I've ever seen an addon which hides its forms until they are needed again but it's an interesting idea. Whereas I can see some advantages, I'd be inclined to always load the form from XML for a few reasons:
1) Most of the time I tend to be working with multiple instances of the same user form (ie the user can open my form multiple times like a lot of the system forms). Keeping track of how many instances of my form are open and whether they are hidden or not is more of a pain than just closing and opening the form.
2) Hidden forms still take up memory on the workstation, although that's probably a minor issue for one or two forms at a time.
3) Unless the form is quite complex (ie large number of controls or lots of comboboxes to populate) the load speed is acceptable.
If your form is quite complex and the user is likely to be opening and closing it regularly then I can see an advantage in hiding the form until it is needed again as this should speed up the response time.
There are ways to stop the user closing your form unless they use the Ok or Cancel buttons:
Re: Menu UID for Minimize/Maximize/Close buttons
Kind Regards,
Owen

Oracle Reports, Working with User defined template

Dear Ones,
I saw the Reports9i online help, there if i want to add my own template to the list of predefined template list , it said to add the template in the following directory:"ORACLE_HOME/REPORT60/ADMIN/TEMPLATE/US"
But I am unable to find this directory in my ORACLE-HOME...Plz help me..
Aijaz

Hi Aijaz,
On Windows installation in my machine, the directory structure mentioned is present. But on Solaris, it is under $ORACLE_HOME/reports60/admin/templates.
Please let me know what exactly the help says.
Also state where you are looking for online help.
Are you using 6i / 9i Reports (because directory structure mentions "REPORT60") but you have mentioned who saw in Reports9i Online help. Please clarify.
Thanks,
Vinod.

Getting Login error while working with User Management

Hi,
I am new to EBS and learning to work with 'User Management'.
I have EBS 11i installed on XP.
I face following error message when try to open any screen in 'User Management' responsibility...
*'This type of function cant be performed without logging into E-Business Suite Home Page'....*
This error is strange for me because i login with SYSADMIN and then choose 'User Management' responsibility.
Thanks in advance for any helpful hint.
Regards,
Sohail.

Hi,
I face following error message when try to open any screen in 'User Management' responsibility...
*'This type of function cant be performed without logging into E-Business Suite Home Page'....*Please mention the navigation path to reproduce the issue.
Also, please check Apache log files for any errors.
This error is strange for me because i login with SYSADMIN and then choose 'User Management' responsibility.Please see (How to to Define an Application User That Has All The Priviledges in User Management Responsibility options As SYSADMIN User [ID 378262.1]).
Thanks,
Hussein

Personalization Publication with user defined / multiple / discrete values

Hello,
I try to personalize a main report ( with Enterprise XI 12.1.0, Crystal Report XI )
( parameter p_company_code ( as string ), with user defined / multiple / discree and range values )
with dynamic recipients ( Crystal Report ).
For a single value it works.
But I did not find a solution how to set up the values for my parameter p_company_code so that I can start the main report
with the following company codes ( 4711, 4712, 0815-0890 ) for one recipients ( only one report for all this company codes )
Thans for your help
H. Blum

Hi Fabio,
It works as follows.
let's say you have 3 multiple single lines for your cost center variable.
once you are in the folder, select any single value & the layout is ready for planning with the corresponding cost center.
now, select the "Cost center variable row" in the header of the folder within section "Name of Variable" & click on "Trash Can" icon to "Delete Selection" of variable.
this basically deletes all the entered selections (3 entries) & displays for all.
It works this way, because we don't have "resriction of values required by user".
if am not wrong & correct me if am wrong,
overall, this is nothing but equal to "planning level not restricted with any variable".
I just tested this & the flaw in this is that, it is not only displaying for all the initially entered 3 lines but it displays for each & every cost center irrespective of the variable selections.
hope it is clear.

Want to proceed with User defined fuction in Mapping i dont know java

Hi all ,
i dont know Java , i want to proceed with user defined fuction , i have worked with ABAP but not with java , i do want abt some knowledge about it ,
thanks
sridhar

Hi,
Please see the below links ,
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-i
Difference in using java,xslt,message mapping
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-i
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-ii
/people/prasad.ulagappan2/blog/2005/06/29/java-mapping-part-iii
/people/stefan.grube/blog/2006/10/23/testing-and-debugging-java-mapping-in-developer-studio
/people/thorsten.nordholmsbirk/blog/2006/08/10/using-jaxp-to-both-parse-and-emit-xml-in-xi-java-mapping-programs
/people/rahul.nawale2/blog/2006/07/18/java-mapping-an-alternate-way-of-reading-a-csv-file
/people/amol.joshi2/blog/2006/03/10/think-objects-when-creating-java-mappings
XSLT Mapping
/people/prasadbabu.nemalikanti3/blog/2006/03/30/xpath-functions-in-xslt-mapping
/people/sreekanth.babu2/blog/2005/01/05/design-time-value-mappings-in-xslt
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
XSLT Mapping with java enhancement
/people/pooja.pandey/blog/2005/06/27/xslt-mapping-with-java-enhancement-for-beginners
Regards
Chilla..

Retain standard SAP order type after copying with user defined order type

Hello SAP Gurus,
We have a requirement of retaining the standard SAP order types after copying with User defined order types. But the issue is we don't want to see the standard SAP order type such as PM01, PM02 in production system while using transaction like IW31 etc.
Is there anybody who has answer to retain these stanadard SAP order types without deleting from system configuration?
Thanks in advance.
Cheers,
Vaibhav

Vaibhav,
When you F4 on the order type field in IW31 you will get the popup showing the order type list. At the top of this list is a button with a green "+" sign (Insert in personal list).
You can use this button to select your favourite list.
This function is available in most F4 drop-down lists.
However, you cannot set this setting for all users. You will need to write an ABAP program to do this.
PeteA

Problem with user-defined functions in XQuery String

hello
i've a problem with user-defined functions in XQuery String
details are here (the code is not Human-readable via forum's embedded editor ?? strange)
http://docs.google.com/Doc?id=ddqwddsr_21c96d9x
thanks !!

See
michaels> select xmlquery('declare function local:test_function($namecmp as xs:string?, $inputtype as xs:string?) as xs:string?
                    return {$inputtype}
                 local:test_function("1","2")' returning content) o from dual
Error at line 5
ORA-19114: error during parsing the XQuery expression:
LPX-00801: XQuery syntax error at '{'
3                       return {$inputtype}
-                              ^
michaels> select xmlquery('declare function local:test_function($namecmp as xs:string?, $inputtype as xs:string?) as xs:string?
                    $inputtype
                 local:test_function("1","2")' returning content) o from dual
O
2
1 row selected.

Display of document line items with user defined fields

Hi all,
I have created two user defined fields in CI_COBL structure and they are available on OBC4 screen. I maintained optinal for entry in the screen layout. I posted one document with user defined fields and saved.
Now the document is updated in BSEG table. I then display the document, and it display the doucment
But when i double click on the one of the line items system gives an error that there is some problem in customising and entries missing in Table COBM.
I checked OXK3 and see that in field information for user fields, it says entries maintained in table COBM.
But still i couldnt display my line items in detail.
Any solutions
Thanks in advance
Ram

Yes your are looking at the correct sap note.
Things look pretty straight forward in the notes documentation.
1)Extend the VBKRED structure with the fields you want.
2)Populate thse values in the user exit in program DBKMVF02 in FORM routine USER_EXIT_FUELLEN_XVBKRED.
For extending a standard structure you need to create a zstructuree in se11 first and then append it to the standard structure.
In your case you need to extend VBKRED_EX1 structure rather than VBKRED.
Regards,
ravi

Error erase Queries in Query Manager- The query is used with user-define...

Hello Experts
I have deleted a User Field that had a Formatted Search and now I can not remove it because it is linked according to a UF, the error message is as follows:
"The query is used with user-defined values [Message 952-23]"
There will be a way to resolve this issue???
Thanks in advance

Hi Juan,
I have tried this very limited, but the formid, is this a number in your case?
SELECT * from cshs t0 inner join ouqr t1 on t0.queryid = t1.intrnalkey
where t1.qname = '[%0]'
Running this query I can get the form id that I need to recreate, but I have a feeling you already know the form id, is this correct?
- Is there an error when you try to recreate the form id?
- Will it not let you recreate the same form id because the id is given by the system?
If it is not possible to recreate the form id, please prepare a backup and log a message. Support should be able to correct the entry in table cshs.
Hope it helps.
Jesper

ALV with user-defined buttons on toolbar in wd abap

Hi All,
I have to create an alv with user defined buttons in wd abap on its toolbar.Could any one tell me in detail about it or provide me with any tutorial based on it.
Thanking you all in advance.

DATA: LR_CMP_USAGE TYPE REF TO IF_WD_COMPONENT_USAGE.
DATA: LR_INTF_ALV TYPE REF TO IWCI_SALV_WD_TABLE.
LR_CMP_USAGE = WD_THIS->WD_CPUSE_ALV( ).
IF LR_CMP_USAGE->HAS_ACTIVE_COMPONENT( ) EQ ABAP_FALSE.
LR_CMP_USAGE->CREATE_COMPONENT( ).
ENDIF.
LR_INTF_ALV = WD_THIS->WD_CPIFC_ALV( ).
WD_THIS->M_MODEL = LR_INTF_ALV->GET_MODEL( ).
DATA: LR_FUNCTION TYPE REF TO CL_SALV_WD_FUNCTION.
LR_FUNCTION =
WD_THIS->M_MODEL->IF_SALV_WD_FUNCTION_SETTINGS~CREATE_FUNCTION(
ID = 'ISSUE' ).
DATA: LR_BUTTON TYPE REF TO CL_SALV_WD_FE_BUTTON.
CREATE OBJECT LR_BUTTON.
LR_BUTTON->SET_TEXT( 'Issue/Receive' ).
LR_FUNCTION->SET_EDITOR( LR_BUTTON ).
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/101df93f-4b5c-2910-14aa-9eb0338c2110
Abhi

[All Platforms][Your Music] Make it possible to tag and filter "My Music" with user-defined tags

It would be very nice and convenient to be able to tag and filter "My Music" (playlists, songs, albums and artists) with user-defined tags. I'm sure quite a few users would like to classify their music by genre. Myself, I would like to tag my albums, assigning them to different virtual collections.

Updated: 2015-07-23Hello and thanks for the feedback!
A similar idea has also been suggested here:
https://community.spotify.com/t5/Live-Ideas/Your-Music-Grouping-or-Sorting-by-Tags/idi-p/744947
Add your kudos and comments there please! ;)

Notification with user defined type results in PLS-00306: wrong number..

I created a user defined type TLogMessage:
CREATE OR REPLACE TYPE TLogMessage AS OBJECT
module VARCHAR2(4000),
severity NUMBER,
message VARCHAR2(4000)
I also created a multi-consumer queue using this type as payload.
My callback procedure in the package PK_SYST_LOGMESSAGE is defined as follows:
     PROCEDURE DefaultLoggerCallback(
          context          RAW,
          reginfo          SYS.AQ$_REG_INFO,
          descr          SYS.AQ$_DESCRIPTOR,
          payload          RAW,
          payload1     NUMBER
Finally, I registered the callback procedure as follows:
          DBMS_AQADM.ADD_SUBSCRIBER(
               queue_name      => QUEUE_NAME,
               subscriber      => SYS.AQ$_AGENT(
                                        name => 'default_logger',
                                        address => NULL,
                                        protocol => NULL
          DBMS_AQ.REGISTER(
               SYS.AQ$_REG_INFO_LIST(
                    SYS.AQ$_REG_INFO(
                         name          => QUEUE_NAME || ':default_logger',
                         namespace     => DBMS_AQ.NAMESPACE_AQ,
                         callback     => 'plsql://MTDX.PK_SYST_LOGMESSAGE.DefaultLoggerCallback',
                         context          => HEXTORAW('FF')
               1
However, when I put a message in the queue using this procedure:
     PROCEDURE LogMessage(
          pModule          VARCHAR2,
          pSeverity     NUMBER,
          pMessage     VARCHAR2
     IS
          vMessage               TLogMessage;
          vEnqueueOptions          DBMS_AQ.ENQUEUE_OPTIONS_T;
          vMsgProperties          DBMS_AQ.MESSAGE_PROPERTIES_T;
          vMessageHandle          RAW(16);
     BEGIN
          vMessage := TLogMessage(module => pModule, severity => pSeverity, message => pMessage);
          vEnqueueOptions.visibility := DBMS_AQ.IMMEDIATE;
          vMsgProperties.correlation := pModule;
          vMsgProperties.priority := -pSeverity;
          -- Enqueue the message to all subscribers
          DBMS_AQ.ENQUEUE(
               queue_name               => QUEUE_NAME,
               enqueue_options          => vEnqueueOptions,
               message_properties     => vMsgProperties,
               payload                    => vMessage,
               msgid                    => vMessageHandle
     EXCEPTION
          WHEN no_subscribers THEN
               -- No subscribers on the queue; ignore
               NULL;
     END;
I can see the message in the queue, by querying the queue view. I can also see that Oracle tried to call my callback procedure, because in the trace file I see the following:
*** 2009-02-13 08:52:25.000
*** ACTION NAME:() 2009-02-13 08:52:24.984
*** MODULE NAME:() 2009-02-13 08:52:24.984
*** SERVICE NAME:(SYS$USERS) 2009-02-13 08:52:24.984
*** SESSION ID:(609.3387) 2009-02-13 08:52:24.984
Error in PLSQL notification of msgid:4F7962FEDD3B41FA8D9538F0B38FCDD1
Queue :"MTDX"."LOGMESSAGE_QUEUE"
Consumer Name :DEFAULT_LOGGER
PLSQL function :MTDX.PK_SYST_LOGMESSAGE.DefaultLoggerCallback
: Exception Occured, Error msg:
ORA-00604: Fout opgetreden bij recursief SQL-niveau 2.
ORA-06550: Regel 1, kolom 7:
PLS-00306: Onjuist aantal of type argumenten in aanroep naar 'DEFAULTLOGGERCALLBACK'..
ORA-06550: Regel 1, kolom 7:
PL/SQL: Statement ignored.
So.. how many parameters does Oracle expect, and of what type? Is there any way to find out? What is wrong with my code?

Ok, found it... I had defined the last parameter of the callback procedure as 'payload1' (that is: 'payload-ONE') instead of 'payloadl' ('payload-ELL'). It all works like a charm now.
What a way to waste two whole days!

Problems with User Defines Mapping Objects - Dynamic Configuration

We have a mapping object that takes data passed in from R3 and does an HTTP Post to another system using a URL and file name that is passed from the header record. We had a consultant set this up for us last year and in creating the new one we just pretty much copied what he did. The problem is, it is not working for us. We have the url and file name, we pass it to the user defined code that is supposed to pass it to the url and file name in the configuration. The java code looks like this:
public String getPcurlOut(String pcurl,Container container){
String ourSourceFileName = "START";
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
if (conf != null) {
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","Directory");
conf.put(key, pcurl + ".xml");
ourSourceFileName = conf.get(key);
} else {
ourSourceFileName = "conf == null";
Basically we want to pass a url and file name to our communication channel based on values that come from our file in R3
It is almost exactly like the one that works. Can anyone help with this?
Thanks
Mike
Message was edited by:
Michael Curtis

Hi Michael
Basically we want to pass a url and file name to our communication channel based on values that come from our file in R3
--> This means you have file as a sender adapter.
Check adapter specific message properties in sender adapter.
Please refer this blog , it is really worth.
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Also
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","Directory")
Try writing this as
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName")
Regards

View Object with User Defined Type input

I am trying to use a View Object with a query that requires a user defined object as an input parameter.
I have the query working with a PreparedStatement, but would like to use a View Object.
When I use the PreparedStatement, I prepare the user defined type data like this:
// get the data into an object array
Object[] wSRecObjArr = wSRec.getObjectArray();
// set up rec descriptor
StructDescriptor WSRecDescriptor = StructDescriptor.createDescriptor("WS_REC",conn);
// populate the record struct
STRUCT wSRecStruct = new STRUCT(WSRecDescriptor,conn,wSRecObjArr);
Then I can use this in the PreparedStatement like this:
OraclePreparedStatement stat = null;
ResultSet rs = null;
stat = (OraclePreparedStatement)conn.prepareStatement("Select test_pkg.test_function(?) FROM DUAL");
stat.setSTRUCT(1, wSRecStruct);
rs = stat.executeQuery();
I would like to do the same process with a View Object instead of the PreparedStatement.
My question is "How do I create the input objects"?
I obtain the View Object from the Application Module using findViewObject(). I don't actually have a connection object to pass into the StructDescriptor.createDescriptor method.
I have tried just using Java Object Arrays (Object[]) to pass the data, but that gave an error:
oracle.jbo.SQLStmtException: JBO-27122: SQL error during statement preparation.
Any help or pointers are greatly appreciated.
Thank you.
Edited by: 942120 on May 1, 2013 8:45 AM
Edited by: 942120 on May 1, 2013 8:46 AM
Edited by: 942120 on May 1, 2013 9:05 AM
Edited by: 942120 on May 1, 2013 9:06 AM

Custom domains are the way to go.
When I try to pass custom domains that represent my user defined types - it works.
However, one of the functions requires a table of a user defined type be passed in.
I tried creating a domain of the table type. It forces me to add a field during creation (in JDEV), so I tried adding a field of type Array of Element of the domain representing the user defined type.
I populate the table by setting the field I created, but the table is empty in PL/SQL (TEST_TAB.COUNT = 0).
I also tried passing the oracle.jbo.domain.Array object, but that produced an error:
java.sql.SQLException: ORA-06553: PLS-306: wrong number or types of arguments in call
I also tried passing Object[], but that produced an error:
oracle.jbo.SQLStmtException: JBO-27122: SQL error during statement preparation.
How do I properly create, and pass an domain that represents a table of a user defined type?
When I use a OraclePreparedStatement, I can pass a oracle.sql.ARRAY using stat.setARRAY.
Thank you for the help you have provided, and any future advice.
JDEV 10.1.2.3
JDBC 10.2.0.5
Edited by: 942120 on May 13, 2013 7:13 AM
Edited by: 942120 on May 13, 2013 7:16 AM

Working with User-Defined

Similar Messages

Maybe you are looking for