Working with video clips with 5.1 audio

Someone has sent me a video file which has 5.1 audio.  I'm going bonkers trying to figure out how to mute individual channels in this file.  My final project will be stereo and I may not want the audio from the rear channels in my final mix.  I can't figure out what search terms will lead me to the answer in the Premiere help file.  Can anyone help me with this one?
J. D.

You should be able to right click your source file and select Modify->Audio Channels
And then enable or disable channels you'd like to use:
Please note that this can only be done BEFORE use of clip.
Hope that helps!

Similar Messages

  • How can I keep my audio track, delete a short segment of video, and reinsert a new video clip, without changing the audio with the way it lines up with the original video?

    How can I keep my audio track, delete a short segment of video, and reinsert a new video clip, without changing the audio with the way it lines up with the original video?

    If you have either iMovie 09 or iMovie 11 you can do this easily using the Cutaway feature.
    Go to iMovie/Preferences and make sure that the Advanced Tools are enabled.
    Now you jut drag and drop the 2nd clip onto hte first clip at the frame where you want the Cutaway to start. A popup menu will appear. Choose Cutaway.
    Here is a good Tutorial.
    If you have iMovie 08, let me know. There is a way to do it, but it is more complex.

  • Media Encoder CC hangs when working with 96/24 audio

    Title says it all! Has anyone else had this problem with Media Encoder CC? I just upgraded from CS5.5 to CC, and there were no issues with encoding 96/24 audio with CS5.5. I can reduce the audio files to 48/16 and theres no issue, but all the asset files for audio are in 96/24 and I'd of course rather work with the high resolution audio. I've tried searching the interwebz on the issue but can't find anything specific to the audio causing Encoder to hang. Thanks!

    Thomas Nord wrote:
    Update: We have discovered an issue where you can get this behavior if the source is a Premeire Pro sequence whose sample rate doesn't match that of the clips in that sequence. The solution is to match the sample rate of your sequence to that of your clips. Please let me know if this does not resolve your issue.
    Thanks,
    Tom
    I had some 96/16 audio from an H4n recorder. AME just sat there. Also had the same problem exporting directly from PPro without using AME. Just sat there, no error, just nothing.
    Changed the final sequence samples to 96kHz sampling and problem solved. That's a real bummer, since Adobe definitely pushes the sort of "edit anything" mantra a lot, and having to tailor sequence settings to a recently added audio clip is a step in the wrong direction. Glad to know it CAN be fixed, since these renders need to happen, but need that one patched up.

  • Line-in not working with Xfi extreme audio pci-e

    Hi,
    im trying to play my xbox360 on my computer, the video with my winfast dtv000T is ok, but whenI try to get the sound by connecting the xbox360 sound in one of the two mic/line-in I get nothing (tried in K!TV, Winfast PVR, DScaler). Im running XP SP3. I can use teamspeak with the mic but I dont know why when I try to use the line in for sound capture its not working at all (its working with my onboard soundcard, but I prefer my xfi). I connect my xbox to the blue female jack 3.5.
    here are my settings:
    Output:
    ? <img alt="Output part2" height="43" width="34" src="http://img247.imageshack.us/img247/7683/output2zb0.png" title="Output part2"><img alt="output part" height="29" width="247" src="http://img20.imageshack.us/img20/404/outputpi2.png" title="output part">
    Input:
    <img alt="Line-in" height="434" width="562" src="http://img208.imageshack.us/img208/277/lineinwn2.png" title="Line-in">?
    I dont know what to do :/
    anyone have an idea what is causing this ?
    thx in advance

    Under applications there is this version: [url="http://forums.creative.com/t5/forums/replypage/board-id/soundblaster/message-id/#">Creative Console Launcher 2.40.09?[/url]
    My line-in worked as this is the entertainment mode that?you can turn on your Line-in under the mixer tab. Problem is, when I play my guitar there is quite a latency that is unbearable (.05) for a guitarist. I don't know if this should bother your application for it.

  • Does X-Fi MB3 work with GeForce HDMI audio device?

    If I buy http://software.store.creative.com/s...106-21569.aspx, will it work with my GTX 760's HDMI audio device which I'm connecting to my receiver?

    Funny fact: Today, after a reboot, the card worked again... Dunno why... But it does...

  • Which apps work with the new audio copy/paste feature?

    I just installed the update to GarageBand for iPad and tried to use it with apps that support Sonoma's AudioCopy technology (Molten, BassLine). I could not get the copied tracks to paste into GarageBand. Has anyone come across iPad music apps that actually work with this new feature?

    In nano studio you need to open the TRG-16 instrument, and click on EDIT button in the bottom left. Then select the pad you want to use to trigger the audio you are about to paste. On the edit screen that follows, press the sample load button, and on the sample load screen you find the paste button.  Pressing this should reveal a list of samples on the clipboard, select one, hit paste and you should be done!  Hope that helps!

  • Inserting video clip and have both audios at once

    Hi everyone, hopefully somone can help answer my question.  My friend has a video blog and the person who used to do all of his technical stuff is no longer with him, so he's trying to figure it all out, and I figured I'd try to help him.
    In iMovie, does anyone know how to insert a video clip into the main video clip and have the inserted video being shown on the screen but the audio of both videos playing at the same time, with no break in continuity of the main video's audio?  Then, how to transition from the inserted video with both audios playing at the same time back to just the main video, again with no breaks in audio continuity?  I know it's possible on FinalCut Pro, because that is what his tech person used, but for some reason that program freezes my friend's computer, so he's stuck with iMovie for now.
    Any help would be greatly appreciated!  Thanks!

    Thanks for your reply devbear11.  You ALMOST got what I was asking for.  I'm sorry if my wording is confusing, lol.  Everything you said is great, EXCEPT that  I want to KEEP the audio on the inserted video in ADDITION to the audio on the original clip.  So to break it down....
    - Main video clip is playing.
    - Segue into the inserted video clip.  Have the screen be showing the inserted video clip and have it be playing it's own audio, WITHOUT interrupting the audio of the original/main video.
    - Inserted video clip plays on the screen and you hear both the audio of the inserted video clip in addition to whatever my friend is saying on the main audio....To give you an example, my friend blogs about figure skating.  So he will be discussing a competition and the screen is showing him at his desk talking about the different skaters.  While he is discussing a certain skater, he may input a clip of their performance and you will see and hear them skating to their music, but still be able to hear him discussing it uninterrupted in the background.
    - Once the inserted clip ends, the video switches back to my friend at his desk, with his commentary uninterrupted.
    Am I making sense? lol

  • Can PP make a video clip find its matching audio and pull it.

    I have a SEQ that i created. I made 2 copies of the same seq.
    Then i used the copy to ad the razamataz.
    Then i unlinked the audio and exported that to an aiff.
    I opened the aiff in soundtrack. Doctered it a bit and exported an aiff file from there.
    I reimported that aiff and put it back on the TL .It matched flawlessly.
    Then the client all of a sudden wants me to add another clip.
    When i open up PP the original seq was no where to be found.
    So is it possible to use the clip on the TL to pull the audio back to at least 1 clip at a time?
    Can premier ad that audio clip back to the TL (w/ handles) or am i just simply facing a replace clip and re-edit the video situation?

    Its not a large project.  38 clips, 9 SEQs, 14 composition elements, 4 audio elements
    I am gonna chalk it up to operator error why the original is gone.
    I think this is a straight up 'replace clips' and copy grade situation. Then i gotta reclean the audio.
    I did figure out that the fastest way to replace the audio clip was to 'reveal in 'project' , load to source monitor and pull the audio stream.
    Maybe CS6 will have the ability to "replace audio/video clip with original source" comand or something to that effect.
    Thanks for your responses.

  • PC Suite-video clips have no no audio

    Hi there
    Please help me with PC SUITE!
    My PC plays my video clips on pc suite that are on my phone fine however they do not have any audio. Iv put the sound right up on both pc suite and computer but still nothing!?
    What do i do???

    Have you taken the videoclip yourself with your phone ? Please tell the phone model nr and PC suite version at least. YOu are making it impossible to help you since you provide no data.

  • Video Clips get pushed by Audio Clips

    When I add an audio clip to my CC timeline it always pushes my video clips down.  Why is this happening?  It even happens when I lock my video clips.  I'm sure it's something simple but I can't figure it out.  Thanks.

    shooternz, I shouldn't have been so presumptious to assume that you should just run to my flickr page and download it.  I hope you didn't take it that way.  I understand your limited time for all of these picky questions.  If there is a better way to get that large detailed screen cap to you, let me know.  I don't know if the Flickr route was appropriate or not.  I'm not sure I would like it if someone just told me to download a big pic from Flickr out of the blue so I applogize if I crossed an ettiquete line.  That wasn't my intention.  Thanks for even considering it.  I don't get the feelilng that my issue is a bug as it's so consistent across all of the targeting/untargeting and sync lock/sync unlock toggling.  It's probably something silly I'm doing and I thought I was fairly competent with Premiere CC.

  • Video clip won't follow Audio clip on timeline

    Hi,
    When i drag a clip onto the timeline, the video clip for example ends up on track V1 and the audio on A1 and A2. So far so good. But when I want to drag my video clip to track V2, one would expect the audio clip to move to A3 and A4. This does NOT happen. The audio clips are still on track A1 and A2. Does anyone have a solution for this?

    While I know of no way to move both the audio and video tracks up or down together, I can offer two ways get them on the desired tracks in the first place:
    when dragging, hover the mouse over the track you want to the clip to land on
    In the Timeline, set Source Patching to the desired tracks, then use the Insert or Overlay command instead of drag-n-drop.
    Once a clip is in a sequence on the "wrong" track, as far as I'm aware you're stuck moving the audio and video separately. I encourage you to submit a feature request: www.adobe.com/go/wish (and that's not just a canned suggestion; I'd love to have a shortcut for doing this!)

  • Working with Multi Channel Audio

    i've recently been getting into backing videos for live band performances, and have been trying to work out how to assign audio tracks to multichannel outputs, specifically i want to have a stereo music track with a mono (or stereo) click track. Any ideas??

    i've recently been getting into backing videos for live band performances, and have been trying to work out how to assign audio tracks to multichannel outputs, specifically i want to have a stereo music track with a mono (or stereo) click track. Any ideas?Not exactly sure what you are looking for here. Multichannel outputs are normally assigned as part of the A/V creation/conversion process. However, individual/combined audio track/streams can be reassigned using the "Properties > Audio Settings" option in QT Pro. If you are referring to the switching of multiple audio tracks (mono, stereo, 5.1, etc), this capability can be programmed using the "Properties > Other Settings" option for the various associated audio and/or video tracks involved. Switching is accomplished using the QT Player "Choose Language..." View menu option during/before playback. (Note: iTunes and iPod players do not include an option for switching to alternate tracks and players like VLC use arbitrary track identifications while the QT Player uses "Languages" for reference.)

  • X-Fi Extreme Audio PCIe Driver doenst work with Vista - HD Audio Device is installed automati

    Hey,
    after trying for hours this forum is my last hope. For about a year my PC worked more or less fine with Vista Business und the Soundblaster Extreme Audio PCIe (if you ignore the not working line in).
    But today the driver vanished for no reason. Instead of the Creative Driver an Vista HD Audio Device was installed. I still got sound but the overall sound quality got really bad.
    So i tried reinstalling the Soundcard using the Driver CD. There were no error messages but after a reboot there was still the HD
    Audio Device. I downloaded the new driver from the creative HP: Same effect. I tried updating the HD Device, i tried deleting the Device. I even tried deleteing the the internal Driverfiles but after that I just got the problem that I had no audio device at all.
    I don't think the card is broken because i get sound using the HD Driver.
    Has anyone any idea what i can do to fix this

    Funny fact: Today, after a reboot, the card worked again... Dunno why... But it does...

  • Help! Nokia 8600 not working with my Ford audio bl...

    I've got a problem connecting my Nokia 8600 Luna to the Ford Audio on my Ford S-Max 2006 via bluetooth. Whenever I try to bond between the two bluetooth products, I get a "Bonding Failed" message on the Ford CD player display and "unable to bond to bluetooth device" on the phone.
    I've asked around some Ford S-Max forums and I'm told that I may need to wait for a Nokia Firmware update for the 8600 and keep my fingers crossed that this will contain and update which will make the two devices compatible. Is this true? Its very frustrating as I have an old Nokia 6230 which works fine on the Ford Audio and I have to switch to using this on long drives! The bluetooth on the smax was an expensive option and the Nokia 8600 ain't cheap either and now I feel like they've both been a waste of money! Please help me Nokia community.

    I don't know whether a firmware upgrade would help. You were lucky with the 6230, it had excellent compatibility with a wide variety of car kits. The 8600 is compatible with relatively few.
    Ford are factory-fitting some cars with a car kit developed on their behalf by Nokia - if yours is this system, then a list of compatible phones is on the web site (I can't give you a direct link because they use flash presentation pages in the web site, but start here: http://www.nokia.co.uk/A4221246 and work your way through car > car integration > Ford.
    The problem with factory-fit car kits is that the car manufacturers get one of the phone/car kit manufacturers to develop kits for them, but they usually don't maintain the relationship so the car kit falls behind as new phones are developed.

  • Audio not working on video clips in nokia multimed...

    hey,
    i ahd down loaded pc suit software from side but while playing the vedio cilps on pc the message is comming
    "the audio codec required to play the selacted files is missing the file can not be played properly.check nokia pcsuit faq from www.nokia.com/pcsuit/faq/."
    the pc on which i have net is not having speaker but the other pc where i had run this software is having speaker but the same message is comming their their i dont have net connection and i had run the same downloaded software
    please help

    I need the file extension, cannot help if I don't have that. I gave you instructions how to check the video format in PC.
    Locate the video in PC and by the way, if the video is still in your phone, copy it first to PC and then play it.

  • Getting the voice generator to work with my m-audio keyboard

    when i try to change to the voice generator, it says "missing: mixed choir".
    does anyone know where i can find this mixed choir and where to install it to once i get it?

    http://www.bulletsandbones.com/GB/GBFAQ.html#Audionotmidi

Maybe you are looking for