Working with Windows offline files

Hello,
I'm desperately trying to make Adobe bridge and other applications work faster on our company's graphics design team's computer. They work with files off a company NAS drive and loading and saving files is slow. I've enabled Windows offline files for the entire folder containing their work and synchronised it to a test computer; all their files are now also stored locally. However, they're reporting that Bridge loads even slower than before. I'm out of ideas; those files need to be available to all 3 members of our design team but I still need to make loading and working with said files faster.
Does anyone have any ideas or has anyone else tried adobe products with Windows offline files?

You can check some tools mentioned in this URL : http://www.hongkiat.com/blog/backup-and-sync-tools-for-hard-drives/
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Similar Messages

  • Working with Windows sharing files on MAC disk

    Hi
    I use more often the MAC OS, but i need sometimes to work with windows XP because of 3DStudio.
    i'm using Mac disk to save all my files, but since i need to boot in Windows to get more results i can't get acess to the Mac disk! there is any solution? At the moment i'm using parallels!
    i want to know if there is any simple way to share files (read and save) when i'm working in windows boot?
    Thanks
    n.

    *"i want to know if there is any simple way to share files (read and save) when i'm working in windows boot?"*
    Install MacDrive on the Windows install or format the drive as FAT.
    Otherwise, since this forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to Parallels or Boot Camp you should really consider posting your question on the Parallels and Boot Camp forums:
    http://forums.parallels.com
    http://discussions.apple.com/category.jspa?categoryID=237

  • Working with Windows Media Files

    Hoping someone can point me in the right direction. I have a catologue of 55 webinars that have been recorded over the past 3 years for a client. They were archived as wmv. files and the quaility is very good. They have an issue with the title slides and some audio at the end of the presentations and I am looking for a way to edit these files. I have FCP and it not going to work. I am looking for something that hopefully does not have to render the originals on the timeline.
    Does Premiere Elements allow you to edit wmv as a native file format? Or does anyone know of a third party utility that will allow me to do the edits. Thanks.

    Welcome to the forum.
    As you say:
    I have FCP and it not going to work.
    Is it safe to assume that you are on a Mac?
    First, WMV is a format, that is very heavily-compressed  Though PrE on a PC can Import them, there is a lot of processing that is required. I always convert to DV-AVI (on my PC for SD material), and then Import those.
    For a Mac, I am not sure what is required to handle, and convert a WMV to probably a MOV file, but am sure that others can make Mac recs. for this. I do know that on a PC, QuickTime Pro (US $ 29 upgrade/unlock) can do a lot of conversions, but do not know about WMV's on a Mac.
    Wish that I had more useful info, but others will probably to give you some good input for the Mac.
    Good luck,
    Hunt

  • Formatting Mac HDD to work with windows files/applications

    I was thinking of partitioning the hardrive and formatting one partition whatever way I would need to in order to use it like a Windows computer, because I really have no use for my Mac, if I cant get it to run many applications that are windows exclusive. However I would need to send for the Tiger startup disk, and I dont want to pay for it unless I'm sure that this is even possible, and I want to know what I am doing
    Anyway I dont really know that much about macs, so exactly what do I need, and what do I need to do, for it to work with windows/PC files and applications?
    And My Harddrive has a total of 9.5 GB, and only four GB of free space (I dont even have anything on the computer, so I don't know what is taking so much space) is that enough space to do whatever it is i'm talking about?

    virtual PC is pretty slow, I wouldn't really recommend it at this point on an old iMac. maybe for really light duty things. Frankly, you're probably better off just selling, donating or getting rid of it and getting a cheap PC. a cheap PC is a cheap PC, and in my opinion very inferior to the mac, but it will run windows much faster.
    Or just use it as a mac. A mac can do just about anything a windows box can, and is usually more reliable. Files can be read without problems in most cases. Give it a shot.

  • Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click w

    Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
    Thanks.

    Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
    Thanks.

  • TS1538 Ipod Classic will not work with Windows 8. Is there a fix?

    Itunes will not work with Windows 8. I have the latest version of itunes!
    When will the fix be available?
    When I try to Sync my ipod, nothing happens.

    Hi,
    You can download the latest official Firefox here: https://www.mozilla.org/en-US/firefox/new/
    You may also have to install [http://www.oracle.com/technetwork/java/javase/downloads/jre7u9-downloads-1859586.html Java] (choose either Windows x86 Offline or Windows x86 Online), and [http://get.adobe.com/flashplayer/ Flash] (choose the Firefox version and also deselect extras).
    For the Firefox metro version, please see [https://wiki.mozilla.org/Firefox/Windows_8_Integration#Elm_Nightly_Builds this]. You can install and use it along with the other version.

  • TS1538 Does Ipod Nano (3rd gen) not work with Windows 8?

    I have tried all of the uninstall and reinstalls, upgrades, reset of ipod nano, etc.... Cannot get computer or itunes to recognize ipod nano.  Does this device work with Windows 8?

    Have you had a chance to look at this troubleshooting page? It may be of some help: What to do if iPod can't be updated because the firmware file was corrupt or not found

  • BT not working with Windows 7

    I am not able to synch my Pearl 8130 with Windows 7 RC 64 bit version.  The BT works just fine with XP SP3 but so far I have not been able to get it to work with Windows 7.  The BT option is greyed out although I have run the add new hardware wizard several times.  Works OK with USB connection to synch but no go with BT synch as yet.
    I would appreciate any help or suggestions that you may have.  Microsoft says it's a BB issue.
    Details:
    BT device is a Logitech USB dongle for cordless desktop pro 5000.  Dongle is listed in devices in Window 7 and keyboard/mouse works fine.  I am using BB Desktop 5.0  which I just upgraded from 4.7.   The upgrade had no effect on the performance in XP or Win 7.
    Thanks in advance,
    M

    Hi,
    Based on your description, what’s the error massage when standard users access these mapped .exe files. Besides, we need to make sure that standard users have enough permissions
    to access these .exe files. We can also check Event Viewer to see if some error events were logged.
    In addition, we can also run cmd command gpresult/v to see if some software restriction policy is applied.
    Best regards,
    Frank Shen

  • Does the trial version of pse13 work with windows 8.1

    Can someone please tell me if the trial version of pse13 will work with windows 8.1?  I've been trying to download and continue to get error message that "The file archive part is missing."  I have pse 7 and would like to upgrade but want to try it first.

    Yes it will work. Try from this link. Select the appropriate Windows or Mac version and click the download button.
    https://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us&PID=2159997 #

  • What versions will work with Windows ME?

    I currently have Firefox 1.something on my aging Windows ME system. My e-mail provider recently upgraded and consequently, I need to be using at least verion 2.0 of Firefox. I downloaded the newest version, but get an error after the files have been extracted and the setup starts to run. Which version(s) of Firefox will work with Windows ME and from where can I download that version?

    The last version that works with Windows ME is Firefox 2.0.0.20 available from ftp://ftp.mozilla.org/pub/mozilla.org/firefox/releases/2.0.0.20/win32/en-US/

  • Working with bootstrap css file after opening the browser

    working with bootstrap css file after opening the browser when i came back on working on bootstrap my computer started hanging and opning new tabs  and showing message " A caused the program to stop working correctly.Windows will close thoe program and notify you if  solution is available"

    Hi Geetha,
    1.) button problem:
    i don't know how you open the form - when you do it with a XML file maybe you packed the wrong XML file into your addon installer.
    2.) the flickering can be a problem of formatted searches or interacting with other addons.
    when addon a. changes a field it can be that addon b. does something because of the event from addon a.
    the same can happen when you have formatted searches that do something when a field changes.
    ok - that are my last tipps for this day
    good night
    David

  • Software available for working with large video files?

    Hello,
    I'm working in PP CS6. I was wondering if there are any workarounds or 3rd party plugins/software that
    make working with really large video files easier and faster?
    Thanks.
    Mark

    Hi Jeff,
    Thanks for helping. This is the first time I shot video with my Nikon D5200. It was only a 3 minute test clip
    set at the highest resolution, 1920x1080-60i. I saw the red line above the clip in PP CS6 and hit the enter
    key to render the clip.
    It took almost 18 minutes or so to render the clip. This is probably normal but I was wondering if there is
    a way to reduce the file size so it doesn't take quite as long to render. I just remember a few years back
    that when the Red camera was out, guys were working with really huge files and there was a program
    from Cine something that they used to reduce the file size and make it more manageable when editing.
    I could be mistaken. I've been out of the editing look for a few years and just getting back into it.
    Thanks.
    Mark
    Here's my PC's components list you asked for:
    VisionDAW 4U 8-Core Xeon Workstation
      2 Intel QUAD-Core Xeon 5365-3.0GHz, 8MB, 1333MHz Processors
      16GB 667MHz Fully Buffered Server Memory Modules (2x2GB)
      Microsoft® Windows® Windows 7 Ultimate (x64)
      WDC 250GB, Ultra ATA100, 7200 rpm, 8MG Buffer Main OS HD
      2 WWDC 750GB, SATA II, 7200 RPM, 16MB Buffer HD (Raid 0)
      2 WDC 750GB, SATA II, 7200 rpm, 16MG Buffer HD (Samples)
      2 WDC 1TB Enterprise Class, SATA II, 7200 RPM, 32MB Buffer Hard Drive
      MOTU 24 I/O (main) / MOTU 2408mk3 (slave)
      Plexor PX-800A 18X Dbl. Layer DVD+/-RW Optical Drive
      Buffalo BuRay Drive (External) BR-816SU2 
      Front Panel USB Acess
      Integrated FireWire (1394a) interface
      Thermaltake Toughpower 850W Power Supply
      3xUAD1 Universal Audio Cards
      NVIDIA QUADRO FX 1800 / Memory 768 MB GDDR3
      CUDA Parallel Processor Cores / 64
      Maximum Display Resolution Digital @60Hz = 2560x1600
      Memory Interface 192Bit
      Memory Bandwidth (GB/sec) / 38.4 GB/sec
      PCI-Express, DUAL-Link DVI 1
      Digital Outputs 3 (2 out of 3 active at a time)
      Dual 25.5" Samsung 2693HM LCD HD Monitors

  • Speed up Illustrator CC when working with large vector files

    Raster (mainly) files up to 350 Mb. run fast in Illustrator CC, while vector files of 10 Mb. are a pain in the *blieb* (eg. zooming & panning). When reading the file it seems to freeze around 95 % for a few minutes. Memory usage goes up to 6 Gb. Processor usage 30 - 50 %.
    Are there ways to speed things up while working with large vector files in Illustrator CC?
    System:
    64 bit Windows 7 enterprise
    Memory: 16 Gb
    Processor: Intel Xeon 3,7 GHz (8 threads)
    Graphics: nVidia Geforce K4000

    Files with large amounts vector points will put a strain on the fastest of computers. But any type of speed increase we can get you can save you lots of time.
    Delete any unwanted stray points using  Select >> Object >> stray points
    Optimize performance | Windows
    Did you draw this yourself, is the file as clean as can be? Are there any repeated paths underneath your art which do not need to be there from live tracing or stock art sites?
    Check the control panel >> programs and features and sort by installed recently and uninstall anything suspicious.
    Sorry there will be no short or single answer to this, as per the previous poster using layers effectively, and working in outline mode when possible might the best you can do.

  • Working with converted .mov files in Premiere Elements 2

    I recently got a digital camera that records .mov clips with H.264 technology. I use it for back up when Im having problems with my regular camcorder. Of course I can work with these .mov files in QuickTime Pro with no problem. But in order to work with them in Premiere Elements 2, it appears I have to export it into the .avi format first. After exporting in QuickTime Pro, when I bring the new .avi file up into Premiere Elements, the color quality is retained, but much of the resolution is lost. Its very pixelated. I understand that .avi and .mov work differently in the way information is stored avi in chunks and mov in streams, but Im wondering if there is a way I can work around this. The reason why I got QuickTime Pro initially was to be able to convert my finished .avi videos made in Premiere Elements 2 into MPEG-4 files using the H.264 codec for better quality. And Im doing that all the time now with no problem. So I am wondering if when I reconvert the .mov clip thats been converted into .avi back into mpeg-4, will the resolution be restored? That is part of my question. The other part is regarding the initial conversion process. Are there settings in QuickTime Pro for converting .mov to .avi with as little loss in resolution as possible? The manual doesnt address this issue specifically. Any ideas or suggestions? OS is Windows XP Media Center edition, computer Sony Vaio dual processor. Thanks, Judy

    Hi again Steve. I'm so embarrassed. After my initial reply to your message I went to the Adobe site to see if they even made Premiere for Mac and learned they don't. I also read a review in Wired that says Premiere 6 is just as good if not better than iMovie which they say has actually been downgraded. I'm using Premiere 2, so I thought I might consider upgrading. Then I watched "Steve's Story" and realized it was you. (Your daughter is a cutie! Adobe must love you.) So my question is this: Would my problem be solved by simply upgrading to Premiere 4? If I do that, would it be compatible with regard to catalog integration with Photoshop Elements 4 or would I have to upgrade to Elements 6? If I upgraded the whole package would my current Photoshop Elements 4 catalog transfer with all tags intact? This is vital for me to know because I rely on them heavily. I realize that I would be skipping a version in the upgrade. Is that possible? Does that matter? Please read my reply to Bill because it explains why I want to use those particular .mov files. Another question for you. I use your excellent book a lot. If I upgrade will it become useless? Finally, since you're the expert, let me tell you what I'm really aiming for and get your advice. I need to start composing my own musical soundtracks to my videos. I want to do it as I'm viewing the timeline. Therefore, I know I need to invest in a midi-capable keyboard or controller and software. The problem is that there are few controllers compatible with Windows XP Media Center Edition. I am told I would need to disable the XP Media Center registry keys for anything to work which wouldn't matter because I don't use Media Center features anyway (like TV hookup, media player, etc.). But messing with the registry sounds a little complex and dangerous to me. There's got to be an easier way. Do you have any advice or recommendations? Can you point me to any helpful resources? Now you see why I want a Mac? Everyone says all this kind of stuff would be so much easier with a Mac. Problem is I have a limited budget and would like to make the most with what I have. I hope I haven't overtaxed you with my questions. Thanks for your patience! Judy

  • TS4062 hi can somebody help me... itunes does not accept the iphone 4s but i already have the version 64 bit to work with windows 7 64 bit,  the computer recognizes the phone but itunes sais i need 64 bit itunes.... please is there something im missing...

    hi can somebody help me... itunes does not accept the iphone 4s but i already have the version 64 bit to work with windows 7 64 bit,  the computer recognizes the phone but itunes sais i need 64 bit itunes. please is there something im missing... thanks

    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
    If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

Maybe you are looking for