Working with XSLD mappiing using Altova map force

i have taken the mapping file which is in .XSL from the import archive and put in Altova map force for further adding certain fields , but it is showing me a error which is UNABLE TO DTERMINE THE SCHEMA TYPE (DTD W3C SCHEMA)
please help me in this
thanking you
sridhar

Sridhar,
If you want to add new fields then first add the fields in your source structure and target structure and reimport the message types both of them in altova so that you will have the schema for them. Then you can do the mapping for these fields. This is what it is complaining about.
Regards,
---Satish

Similar Messages

Working with XSLD mappiing using Altova XML SPY 2007

will any one to give me some inputs regarding the working with SPY XML , i have never worked with it please help me
thanking you
sridhar

Hi;
XML spy is a tool which will help you out in doing XSLT mapping.
But you will have to design your logic by your self
download XML spy from http://www.altova.com/download/xmlspy/xml_editor_enterprise.html
XSLT mapping
/people/prasadbabu.nemalikanti3/blog/2006/03/30/xpath-functions-in-xslt-mapping
Mudit

My Viewsonic monitor won't work with the Imac using the Mini Port to DVI adapter.

My Viewsonic monitor won't work with the Imac using the Mini Port to DVI adapter. I also tried the HDMI to DVI adapter ane the Mac-Mini with same result. The monitor does work on my older Macbook Pro that has the DVI connector. Is it a Software/Driver issue ?

Should be extremely simple, please carefully read Connect multiple displays to your Mac. If you still have problems then it's probably a cable issue that would be resolved by replacing the adapter cable. You should be using this adapter. If you are using a third party adapter that might be your problem!

I am looking for a task app that will work with MS Exchange using SecurID. Any suggestions?, i am looking for a task app that will work with MS Exchange using SecurID. Any suggestions?

My company uses MS Exchange with RSA SecurID. I also have an iphone 5 and i would like a good task app to manage my tasks on the go. The problem is all the task apps ive tried wont work with the SecurID. Any suggestions on a good app which will work with SecurID? thanks

Only two devices on our plan, so not so much an issue. And I have found myself using it much more than I thought I would when we got them (also first smart phones for both of us). Even got my wife to use hers for checking email while we were out of the country (big step forward for her ). I'm very interested in the ApplePay, but will want to wait a bit before diving into it. And since both phones are still in great working order, will likely wait a bit for the upgrade (sometime next year?). Will depend, I suppose, on the kinds of deals we see and what the plans turn out to be for updating my iPad and getting here one.

Help: Working with .MOV files in FCP and forced to RENDER FOR EVERY EDIT

I'm working with .MOV files from my digital camera in Final Cut Pro and every time I make a new edit, I have to render it in order to see it in the canvas.
How do I make it so that I don't have to render every edit in order to see it?
(I've worked with files straight from a DV camera, and editing went fine. I'm assuming it has to do with the .MOV files)

DV Cameras are not the same thing as a Digital camera. Digital cameras offer video on a limited basis and it's usually highly compressed in a non-editing format such as MPEG-2 or similar. NLEs are made to work with video cameras, not still cameras which is why you're having trouble.
That's not to say you can't edit video captured with a digital camera, but you need to know how to prep it for editing. Some digital cameras shoot at odd frame rates and they all use some form of compression that is not typically used in editing. This means that you'll likely need to convert your clips to an editable format first using Compressor.
Andy

How to replace namespace tag with new value using -JAVA MAPPING

Hi Guys,
I need to replace namespace Tag in Target xml with a new value.
For Eg: My namespace Tag is - <ns0:TestHeader xmlns:ns0="http://0020.TestHeader.SS.com">
I want My target xml to have value- <ns0:TestHeader>
How can i achieve it using JAVA mapping?
Can you provide me the code to do so.

Sarjana,
Not well-formed XML is only possible by Java Mapping. Please use below replace logic in Java map.
inputContent.replaceAll("<ns0:TestHeader xmlns:ns0=\"http://0020.TestHeader.SS.com\">", "<ns0:TestHeader>");
Link1, Link2.

Working with executing query using IExecution

Dear EP friends,
i am trying to executing a query using IQuery, but i am getting com.sapportals.connector.metadata.CapabilityNotSupportedException
exception.
As i digged the error, i found IQuery is deprecated and i need to use IExecution from https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/javadocs/nw04/sp12/j2ee engine/deprecated-list.html
how to work with IExecution??
thanx in advance
regards
kantha

Hi Laxmi,
were you able to do this?? I have exactly the same problem.
Please let me know if you have already done this.
Regards,
NArahari

Is the MacBook Air recommended for working with RAW photographs using Aperture or Lightroom and perhaps Photoshop?

Is the MacBook Air recommended for working with RAW photographs in Aperture and Photoshop, or do I need a more powerful MacBook ? The relative lack of weight of the AIr is what attracts me to it.

For doing Photography with RAW files in either Aperture or Photoshop, the new MacBook Air is fine, but for Photoshop CS6 some of the filters and plugins really need a better graphics card and plenty of RAM.
You'll also want an external disk if you are going to be doing lots of shooting.
Summary:
Yes, you can use an air but you'll want external storage and at least 8GB of ram.
Or go MacBook Pro with 16GB ram with the 650M card.

Is there a download for Mavericks to work with Epson printer using EFI Fiery 4.5Xpress?

Working with OS 10.9.1, we've purchased the Fiery 4.5 Xpress software for the Epson Stylus Pro 4900, when trying to send a PDF to the printer, I keep getting a "Not supported" error. Is there a patch to fix this incompatibility?

Not from Apple. It would have to come from Epson. Consult their tech support.

How do I go back to the last version in the 9 series? I need my Norton toolbar, but it doesn't work with FF10. I tried the forcing, but that doesn't work. All my logons are stored in Norton.

Windows 7 ultimate edition, Dell Studio XPS PC.
I used Norton utilities, and store all my logons and passwords int he identity safe. With Foxfire 10, my identity safe has disappeared. I tried the routine of forcing add-ons to work and it still doesn't.

Norton generally releases an update within a few hours of a new Firefox version and they did so yesterday
*http://community.norton.com/t5/Norton-Internet-Security-Norton/Firefox-10-Support-for-Norton-Toolbar/td-p/648241
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.org/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.org/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.org/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*'''''Next Generation Java Plug-in for Mozilla browsers''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

Does the Bone tool work with strokes created using the pencil or line tools?

I have a working bone rig in a document(CS4) that I created using a SINGLE pencil stroke, and applying the armature to it. Object drawing was off and it was a single piece with no part being a symbol. This was accomplished TWICE for two stick figure arms.
However, when I tried the same thing in a new document, I couldn't apply bone to the pencil stroke or the line stroke. After going back into the earlier document(where it was still functional) I tried creating a new armature using the exact same technique. But this time Flash wouldn't allow it.
Having failed every additional attempt, I'm wondering if Flash may have glitched somehow the first time, allowing this to work when, typically, it doesn't. Or could I have possibly missed a step somewhere that caused it to fail each attempt at a recreation.

I agree, it is sometimes difficult to click the sweet spot. Here are 3 suggestions:
Pay close attention to the cursor icon. It will change when you're over an anchor or direction point.
Try turning on "Smart Guides". They can be a nuisance, but sometimes they're helpful.
Use the "Convert Buttons" on the Options bar. They may take a bit longer but they're full-proof, plus, you can convert or delete multiple selected points simultaneously using this method.

CSV link doesn't work with popup created using window.showModalDialog

From a data maintenance page, I allow users to view an audit trail of changes in a window which pops up using the window.showModalDialog method.
In the popup page I have a download to CSV file link. When the link is clicked nothing happens.
If I change the method to window.open the CSV link works fine.
Any ideas?

Thank you so much for your suggestions.
I selected Convert RoboHelp Edited topics to HTML in both projects and recompiled them.
I tested with Firefox 3.6 and 5.0.1 with the same maddening result: None of the linked topics popped up. Text pop-ups and See Also links continue to work. Everything works in Internet Explorer.
The errors continue to be the same ones: "Permission dennied to access property 'whname'" and "Permission denied to access property 'document'".
My next step is to test it from a server, but that, of course, requires others to assist.
Have you heard of such a problem before? Do you have any other suggestions?

Dashland plug in does not seem to work with my mac using version 33.1

I've followed instructions on uninstalling and then reinstalling the dashland plug in of my Mac using version 33.1. I just upgraded to 33.1 and Dashland is not working at all. Is there a workaround? Could I use the older version 33.0 until there is a bug fix with Dashland?

Several users have reported an issue with Dashlane according to comments on their Facebook page (note I do not use this software myself). However, this does not appear to be a Firefox issue, so you should contact Dashlane to see how you can get this problem resolved:
* http://support.dashlane.com/
* http://support.dashlane.com/customer/portal/emails/new

X41, X61 will they work with Teamviewer if used as a tablet only?

Hi, Can a PC remote access and control a X41 or X61 Tablet when its off the keyboard base using Teamviewer? Do they operate on special XP tablet editions or XP normal version? Is there a way to get them to work just by touch only? Thank you in advance. regards
Solved!
Go to Solution.

I have used this machine, a non tablet SL510 running Windows 7 to remote control an X200T running Windows 8.1 with the screen folded down to cover the keyboard. It works fine using Teamviewer. I haven't tried the other way round.
I could possibly test later with an X60T, if that would help, but I don't have one running XP - they are on Linux or W7 or 8.
I don't know about the X41T, but my understanding is that the X60/61T 's came with either XP tablet edition or Vista Business. I have seen some X60T's with Vista Basic stickers, and know of one running Vista Business that has the Basic sticker on the top. Unfortunately, the description part of the COA sticker is totally unreadable, so don't know what version that indicates.

Can't get Tomcat to work with a servlet using JDBC

Hi there! I'm running ubuntu 7.04 with Java 1.5 and Tomcat 5. Standard installation of both. I wrote a very simple servlet that just tries to connect to a mysql DBMS and I get this(stack trace):
com.mysql.jdbc.SQLError.createCommunicationsException(SQLError.java:1070)
com.mysql.jdbc.ConnectionImpl.createNewIO(ConnectionImpl.java:2103)
com.mysql.jdbc.ConnectionImpl.<init>(ConnectionImpl.java:718)
com.mysql.jdbc.ConnectionImpl.getInstance(ConnectionImpl.java:298)
com.mysql.jdbc.NonRegisteringDriver.connect(NonRegisteringDriver.java:282)
java.sql.DriverManager.getConnection(DriverManager.java:525)
java.sql.DriverManager.getConnection(DriverManager.java:171)
Search.doGet(Search.java:21)
javax.servlet.http.HttpServlet.service(HttpServlet.java:689)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:585)
org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:243)
java.security.AccessController.doPrivileged(Native Method)
javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:272)
org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:161)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:245)
org.apache.catalina.core.ApplicationFilterChain.access$0(ApplicationFilterChain.java:177)
org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:156)
java.security.AccessController.doPrivileged(Native Method)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:152)
org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118)
org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
java.lang.Thread.run(Thread.java:595)Do you have any idea where the problem is? Normal desktop application can connect to the DBMS flowlessly.

Not sure this will help, but here goes:
I looked through your stack trace for a phrase that is relatively unique and summarizes the problem. I then google searched on it.
Here is what I googled on:
com.mysql.jdbc.NonRegisteringDriver.connect(NonRegisteringDriver.java
I found this that might be of help:
http://dev.mysql.com/doc/refman/4.1/en/connector-j-usagenotes-troubleshooting.html#qandaitem-19-4-5-3-7
In that document I found this:
"The error probably indicates that you are using a older version of the Connector/J JDBC driver (2.0.14 or 3.0.x) and you are trying to connect to a MySQL server with version 4.1x or newer. The older drivers are not compatible with 4.1 or newer of MySQL as they do not support the newer authentication mechanisms.
It is likely that the older version of the Connector/J driver exists within your application directory or your CLASSPATH includes the older Connector/J package.
Also, the word 'NonRegisteringDriver' above indicates your JDBC (which is a driver_ is a non registering type.
I suggest you hit the MySql home page and see if you can download a newer driver.

Working with XSLD mappiing using Altova map force

Similar Messages

Maybe you are looking for