Workitem ID and task ID

Hello ,
In sxi_monitor for process (BPM) in workflow log there are two different Column
1)Workitem ID
2)Task ID
what are these two

Hi Sunil,
Workitem ID:
Workitem will be triggered to execute any specific action to be performed by the Agent Assigned. For exampl Approval or decision work item .
Work item holds up the workflow. When the workflow sends a mail (usually as a background step) it continues with the process immediately after transmitting the mail. When a work item is generated, the workflow will not continue until the work item has been processed.
TASK ID:
System displays an overview of the database tasks and information about the current status of each individual task.And these tasks r represented in theform od task ids.
Procedure for displaying task details:
1.Select a task.
2.Choose Edit Task Details.
Analyze the display of the task details.
Regards,
Vinod.

Similar Messages

Workitem and Task ID

Hello ,
In sxi_monitor for process (BPM) in workflow log there are two different Column
1)Workitem ID
2)Task ID
what are these two

Work item ID
Internal, unique ID of a work item.It can be called Instance ID also of a particaular task or workflow.
The ID is assigned internally (in the system) and has no other meaning.
Task ID
Internal and unique identification for the task.The identification is set automatically when a task
is created and is made up of a 2 digit identification code for the task type (T , TS, WF, WS)
and an 8 digit number.
<inappropriate content removed by moderator>
Thanks
Yogesh Sharma
Edited by: Mike Pokraka on Jul 1, 2008 4:41 PM

What is the diffrence between business Activity and task?

Hi plz explain business activity and task
Madhavi

Hi Venkat Mallela,
Sorry to say this, but you must stop rewarding your own threads. A user registered today (10/25//2007) and posted many threads and always rewarded you as thread completed. I dodn't think it is a coincidence.
If every SDN member starts playing this dirty trick, then there is no meaning to use SDN. SDN is for the people who share their good project experiences by helping other members by answering the issue.
As I mentioned before, I should take up this issue with SAP officials if this happens again.
Not only you, some other members were also recently started practicing the same trick, which is not a good thing.
Hope you understood the voice of other forum members like me.
Thanks,
Paul Kondaveeti

How to remove the Options and Task from the toolbar

In the FLM portal initially we can see 'Options' in the menu bar after we log in. Below it there is 'Tasks' and 'Reports'. on clicking 'Tasks' and new menu bar 'Tasks' can be seen, under which 'New Tasks' option is there. When we click on 'New Forms' it shows the list of forms and when we select the desired form it opens the interactive form.
My problem is when this form is opened on the header the 'Options' and 'Tasks' bar can be seen, under which the adobe menu bar comes (Print, Save, Zoom etc.) . This 'Options' and 'Tasks' how to remove from the interactive forms page.
Edited by: NIKHILKUMAR POOJARI on Feb 13, 2009 4:24 PM

Dear Mano,
By using Authorizations you can remove the Drag and Relate Menu
Goto Administration ---> System Initialization -
> Authorization -
> General Authorization
General -
> Drag & Relate -
> No authorization
Regarding Authorizations, click the below link to get details
[Define Authorizations|https://websmp205.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_HIER_KEY=701100035871000437965&_OBJECT=011000358700000481572006E&_SCENARIO=01100035870000000183&]
Regards,
Bala

Error enabling "Mail, Contacts, Calendars, and Tasks with Outlook" in iCloud 3.0 Control Panel

Unable to enable option “Mail, Contacts, Calendars, and Tasks with Outlook” under iCloud 3.0 Control Panel.
Get following error when clicking checkbox to enable it under iCloud 3.0 Control Panel.
"Setup can't continue because Outlook isn't configured to have a default profile. Check your Outlook settings and try again."
Have tried the following:
Uninstalled / reinstalled iCloud 3.0 control panel
Removed all mail accounts from Outlook 2013 except MS account
Confirmed Outlook was chosen for “Always uses this profile” under Control Panel – Mail (MicroSoft Outlook 2013) – show profiles
Still get the same error when trying to enable the option under iCloud 3.0 Control Panel
PC is running Windows 8.1 (64 bit)
Outlook 2013 was just installed on the PC as part of new Office 2013 installation

Two more things:
First, sorry for the bad spelling, grammar, and all of that. English isn't my first language and I'm so frustrated at this point I'm not paying any attention to it. Sorry!
Second, after trying to repair again the icloud 3.0 through the Control Panel of Windows, guess what? It made Offce to crash again! Now I will have to install it again.
=(

Week view and task list solutions? Solved: a way to sync notes to Mac.

I've been using a Palm Tungsten T5 for years and routinely rely on the Palm's Calendar week view feature and task list. The week view is indispensable to see where I can fit in appointments. Are there any ways to achieve the same functionalities on the iPhone, whether using built-in iPhone apps or third party apps? The task list would have to include item priorities, due dates, alarms, and ideally repeating events.
I have found a way to sync notes from the iPhone to my Mac using MarkSpace's The Missing Sync for iPhone; notes are synced to the MarkSpace "notebook" application, where you can edit the notes (and copy and paste) and sync them back to the iPhone. This doesn't sync notes with any Apple applications, though.
If I could solve the week view and task list omissions, I could see my way to replace my Palm with an iPhone. (And when ePocrates releases a full suite for the iPhone, I'll be all set.) But in the absence of these, I'll have to keep using a Palm.

I'm in the same boat, unfortunately.
As a life long Palm-User the PIM-functionalities of iCal can only be described as "rudimentary". It is nowhere near DateBk6 for example. And I would be just fine if it would come close to say 50% of it's functionality. Right now it's at about 25%.
- no repeating tasks?
- no tasks+calendar in one view?
- no week view?
- no icons for event/task categories?
Come on Apple, such a great device with the amazing screen resolution, horizontal view etc. and you are not taking opportunity of it and get beat by 10 year old PDA's?

I just installed Icloud on my Iphone and PC (all versions as required) I checked mail, caledar and task. Outlook shows an Icloud calendar but none of the events that are on my phone calendar. Email is not syncing from phone to pc either. What do i do?

I just installed Icloud on my Iphone and PC (all versions of updates as required). I checked mail, calendar and tasks to be synced.The Outlook calendar shows an I cloud calendar but none of the events on my phone calendar. Email from the phonre and pc are not syncinh wither. The phone shows an Icloud inbox. What do I do to get items to sync?.

deltajane wrote:
My iphone4 and my ipad mini were synced to my computer, but now I don't seem to be able to see all of my content nor my photo stream. I did see everything there several weeks ago, so I know it worked. How do I access those from my computer. I can't find how to sign on.
This is the article that will assist with this part of your post:
http://support.apple.com/kb/ht4486
deltajane wrote:
I signed on to iCloud, but it only shows the icons for Mail, Contacts, Calendar, Notes, Reminders, Find Phone, Numbers, Pages and Keynotes. Where's everything else ?
What you've outlined in this part of the post is all that icloud stores for you outside of the backup. If you want to restore from the icloud backup you will then have for all practical purposes a carbon restoration back to your device if you restore from the icloud backup.
deltajane wrote:
I want to delete photos that are on my iphone, by doing so from the computer, not my phone.
Syncing your device with itunes will then enable you to remove whatever photos you wish to remove from your device deleting them with the computer and not the iphone.

How can I set the parameters of global channels and tasks previously created inside my application?

Hi everyone !
Before proceeding to the description below I think it´s important to say that I´m using NI USB-6008 as DAQ device and the driver used is DAQmx 7.5.
I´m currently developing an application into which I intend to be able to have complete control of the DAQ device being used, i.e, I´ll be able to create, delete and change the configuration of global channels and tasks previously created, among other things.
To achieve the ends specified above I´ve already developed two vis, one to create global channels and the other to create tasks, and these two are doing a fine job. After this, I thought I came to the easy part ... I think I couldn´t be far for the truth! I thought that everything I should do was to specify which channel or task I´d like to configure and then use a property node to get the results I wanted, but it´s not working ...there are some DAQmx property nodes I thought I could use to do it but I didn´t find a way to change the configuration of the global channels, and none of these property nodes seemed to work, i.e, although the simple vis used to test them ran the chosen parameters didn´t alter at all, after each execution I used MAX to see if they had changed, and to my chagrin they hadn´t.
Can anybody lend me a hand with this problem? As always, any help would be deeply appreciated !

Hi Giovani,
There is a developer zone tutorial that discussus some advanced data acquisition features including programmatic saves of NI-DAQmx tasks, global channels, and scales. This tutorial also includes an example program.
I wrote a short program that creates tasks in MAX. Whenever I wanted to change a part of the task, I would just change that feature in the example program. Take a look at the examples and please let me know if you have any further questions.
Regards,
Hal L.
Attachments:
create task example.vi ‏33 KB

N86 no longer syncs with Outlook Calendar and Task

I have been having much troubles with syncing my N86 (recently updated to 30.009 firmware) to my Outlook 2003 with Ovi Suite 2.1.1.1.
At first, the Contacts kept duplicating themselves. I have about 1000 contacts in my Outlook, but Ovi Suite (and my N86 device) ends up sometimes with 1800 contacts -- of which 800 are duplicates. This is very annoying and time consuming to clean up of course. I have discovered that the problem is somehow linked to Ovi.com. I have since turned off syncing to Ovi.com and only keep my N86 device in sync with Outlook and Ovi Suite. But that wasn't before I had to basically delete all my contacts from the N86 device and from Ovi Suite, followed by a sync to Outlook.
Around this same time, I have noticed that my N86 device was missing appointments that I had entered into Outlook 2003. I discovered that the N86 device no longer syncs to Outlook through Ovi Suite. I keep getting the error message "Sync Canceled -- Could not sync calendar items and tasks. Plug the USB cable into your device again or connect via Bluetooth. Then sync again." I did reconnect my N86 device but the same error message shows each time. Basically, Ovi Suite has stopped syncing Calendar items with my N86 device now.
Can anyone suggest what might have gone wrong? Has anyone else experienced this problem? What can I do to get my calendar items back into my device?
- Kin

Hi Tickles,
Could you be more specific about your issue.
Which operating system do u use?
Are you trying to connect thru cable or thru Bluetooth?
Go to OVI suite -> help -> About nokia OVI suite -> System information. Paste the information...
Regards
Regards,
Diwa
If you like my post, kindly acknowlege the same by giving a kudos to me

In which table we can find the relationship between Role id and Task id

Hi Experts,
In which table we can find the relationship between Role id and Task id in Cprojects.
Thanks
Subhaskar

Hi Subhaskar,
Apart from DPR_ENTITY_LINK , you can also get it from table DPR_PART.
Please go through the below link
http://wiki.sdn.sap.com/wiki/display/PLM/cProjectstablesin+SAP
I hope this will help you.
Regards,
Rahul

Container element in task item text and task description inconsistent

We use the purchase order release workflow 20000075: Workflow for release of purchase order
The container element Release indicator (&_WI_Object_Id.ReleaseIndicator&) is used in the PO release effected task TS20000168 in work item text (title) and task desription (body text).
When we release the PO a workflow notification is send to the PO creator, the title text shown Release indicator = Z (released) and task body text shown release indicator = Z (same).
However, we do a cancel (undo) to the release of the PO, now when we view the same workflow nofication again the task work item text (title) shown Release indicator = Z (released) and task body text shown release indicator = X (blocked) -latest status.
In this scenario the title text does not updated with the latest release indicator value, the task body text does. Task work item title text and task body text is inconsistent for the release indicator. When we view the workflow notification at this point is confused with the release indicator Z and X (approved in task tile and Blocked in task body text).
Please help how to resolve this issue, any way to make the body text release indicator does not change once the notification is generated??

This is very weird!!!!! I will suggest you to check the binding such that the PO Object is binded from Workflow to Task and viceversa.
Thanks
Arghadip

Getting Process Instance Information and Task Properties in a process

Iam using WebLogic8.1 Integration BPM feature. I've designed a Worklist based application.
In the business process, i've to call a java class method from the business process
which takes the process instance and task related properties (viz. the task id,
task name, the current actor etc.). How could i supply these values from within
a business process.
Regards
Raja V.

You can get the task infromation by calling the task control method TeskInfo getTaskInfo()
"raja v" <[email protected]> wrote:
>
Iam using WebLogic8.1 Integration BPM feature. I've designed a Worklist
based application.
In the business process, i've to call a java class method from the business
process
which takes the process instance and task related properties (viz. the
task id,
task name, the current actor etc.). How could i supply these values from
within
a business process.
Regards
Raja V.

What is difference btw project Assignment, Resource Assignment and task Assignment.

Hi,
I am new project accounting Module .
what is difference btw project Assignment, Resource Assignment and task Assignment.

Project Assignment, Resource Assignment refers to the resource management part and Task assignment is basically the work assignment to the resource.
An assignment/requirement is created in PJR for create demand for the resource requirement of the project and when the resource is aligned he can be assigned to the task in the work plan.
Refers to the top down approach in this case.
Additionally a resource can be assigned to the work plan and a assignment can be created to get the resource allocated to the project.
Refers to the bottom up approach in this case

BlackBerry Link and syncing Contacts, Calendar and Tasks with stand-alone desktop installation of Outlook 2010?

I have used Blackberries in business since the beginning. Fantastic products!
Sadly after spending the better part of Feb 6th transitioning from Torch to Z10 I have had to abandon the effort and request an RMA number to return the Z10.
Here is why:
"Link" appears to be focussed on syncing documents and media like content such as music and movies but does not, from what I can tell, sync Outlook Contacts, Calendar entries or Tasks. I have never bothered putting music or movies on a BB... never had the time to fuss with such... however, I use, edit and sync my Contacts, Calendar and Tasks between my Torch and my desktop PC every day... as in EVERY day!
From a review of postings on various forums there does not appear to be a solution in the works to this problem and the trend appears to be to use a Cloud based email or service to host such "PIM" information and then sync the handheld to the Cloud repository. This method MAY be suitable for some forms of info but it is not suitable to post such personal info on the cloud... it needs to stay on the desktop and in the handheld device, both of which are password protected and looked after carefully.
This is an odd situation, BB (RIM) cut their teeth on pages, emails, BBM and great cell calls, mainly in a business environment. Many small business users live and die on their BB. They do not run Exchange Server... they run Outlook stand alone on a desktop. To remove this functionality from the Z10 (BB10 overall perhaps) seems at best to be a serious oversight.
I wish BB the best with the Z10 and hope to see it do well. For me, I had to make a choice between the efficiency and effectiveness of syncing Outlook Contacts, Calendar and Tasks with the Torch, or hand feeding and maintaining thousands of constantly changing entries into what is undoubtedly a more powerful and wonderful looking Z10. Efficiency and effectiveness won over brawn and beauty. The Torch is back on line... It's a tool... a really great tool! Tomorrow it will process a hundred emails, numerous SMS messages, a few BBM's, keep me on time and feed me a bunch of useful phone numbers and addresses as it has for a couple of years now. It will also spend an hour or so teathered to my laptop at a remote location where there is cell coverage but no internet. It will NOT display any movies, tweats, twits, or facebook stuff that I won't have time to look at anyway. The fast, powerful, shiny Z10 is heading in an RMA bag back to Telus.
I have a sort of sick feeling in my gut and hope to be able to sync again in the future!

my feelings and my situation excatly

Admin and Task servers as one in the same

I open up the Remote Desktop software, and select 1 computer from the list. I then click on the "Install" icon and drag a .pkg file inside of the "Packages" area. I check off the radio button that says "Run this task from: The Task Server on this computer" and click the "Install" button.
I get a progress bar that runs infinitley and a message that says "The targetd computer, "<computer name>", is currently idle. It doesn't matter if the computer is up and running, or if it is offline. It says the same thing regardless and never installs the package.
If I decide not to "Run this task from: The Task Server on this computer" and instead "Run this task from: This application" then it works prefectly. I just can't seem to install from the local task server, which means I have to wait until this machine is online before I can manually run it, which means there's a problem with the way I set up the Task server.
Does anyone have any idea what's wrong with my installation? I have gone into "Remote Desktop -> Preferences -> Task Server" and made sure "Use Task Server on this computer" was selected, and it is. I am NOT using 2 different serial number for 2 different and separate copies of ARD3 for both an Admin + Task Server. I am, however, expecting the Task Server and Admin Server to run as one in the same. If this is not possible then perhaps the Documentation needs updating? From http://images.apple.com/server/docs/ARDTaskServer.pdf I read: "You can run the Task Server on either the administrator computer or a dedicated remote computer. The default Task Server is the administrator computer on which you installed Remote Desktop.". This means the Admin and Task Servers can run as one in the same, no? Please let me know if this is incorrect.

Update: Please refer to the post with the title of "Possible to run both an Admin Server and Task server from the same host?". Basically the answer to this problem is that there isn't one. I've called apple support and it's been confirmed that an Admin server and Task server CANNOT be run from the same installation on the same host. I suppose you could say the answer is to buy another license of ARD3 and run it in a separate host, but for some of us this isn't an option - especially for a very small startup.

Workitem ID and task ID

Similar Messages

Maybe you are looking for