Workitem is not opening in UWL configuraton

Hi,
In my project UWL configuraton has been done newly..
When my workflow is getting triggered an workitem is generated for user decision task(General) and its coming to sap inbox and working fine for approval/reject.
But when the same workitem goes to UWL..its appearing there but when users click on the workitem its not opening...just rendering and wait ... I am unable to understand why the WI is not opening in UWL only while its working fine in sap inbox.
Can anybody what is the reason for that...is it for portal issue? or ADS connection issue or workflow Task issue?
Any help will be appriciable...
Thanks,
Biswajit.

Please do not cross post the same question in multiple forums.

Similar Messages

  • Attachement not opened in UWL for trip requuest approver in workflow:

    Hi All,
    Issue Description:
    Attachment not opening in UWL while send for approval of Travel Request but opening in ECC.
    Issue Object:
    BO: BUS2089 Method: Display
    Created a custom BO: ZBUS2089 and delegated to  standard BUS2089.
    Looked Solutions:
    SAP Note :
    568323 - Travel manager: Services for the object
    596584 - Travel manager - Services for the object II
    But not applicable for this version.
    Brief Description:
      An employee raising a travel request in his login while rising, he attaching the bill scanned copy in the travel request.
    Step: 1 Clicking Create New Travel Request
    By clicking Attachment Button Adding Attachment:
    Attaching a word document
    Trip is saved and send for approval:
    Travel Request for Approval is received in Work item:
    Opening the work item from UWL:
    Now by Clicking the Object and attachment  Employee Trip 0000000079 viewing trip Details
    Now opening the Attachment List:
    Attachment List is displayed:
    Selecting the line item and displaying the attachment by Pressing Display Button:
    Word  Document Not opening.
    But In ECC
    Attached word document is opened:
    Please Provide solution for the Problem.
    Please find the attached document for the Screenshots.

    I'm not sure this is similar to your problem but I had an issue once with opening word documents from the UWL and I think that the problem was that it was opened via ITS and ITS didn't not open word documents. try to set the links to open in winGUI and maybe than they will work.
    In the portal go to:
    Content Administration->Portal Content->Portal Users->Standard Portal Users->Universal Worklist->UWL - Launch SAP Transaction
    Under property category choose 'content - transaction' and set 'SAP GUI Type' to 'SAP GUI for Windows'.
    maybe it will help your problem as well.

  • UWL workitem does not open ISRFormApprove application - isr/PCR - MSS BP

    We have configured the UWL based on the standard UWL config. guide. The standard itemtypes for MSS which launches the ISRFormApprove application (TS91000075) is part of the xml config. This was working properly when the ABAP stack and Java stack were on the same server (xR2DB1). At that time the ISR webdynpro applications were on the same server (xR2DB1). Now the ISR webdynpro applications are on the portal server (xE2DB1). When we try to open the workitem it looks for the application on xR2DB1 instead of xE2DB1. The error we get is
    *********error start
    Service cannot be reached
    What has happened?
    URL http://xr2db1.xx.xx.com:8000/webdynpro/dispatcher/sap.com/pcui_gp~isr/IsrFormApprove call was terminated because the corresponding service is not available.
    Note
         The termination occurred in system xR2 with error code 404 and for the reason Not found.
         The selected virtual host was 0 .
    What can I do?
         Please select a valid URL.
         If you do not yet have a user ID, contact your system administrator.
    ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:xR2DB1_xR2_00-v:0-s:404-r:Notfound
    HTTP 404 - Not found
    Your SAP Internet Communication Framework Team
    *********error end
    If we try to use a system in the portal that points to xE2DB1 we get the following error when trying to register this new webflow system in the UWL admin -
    System SAP_WebDynpro_XSS: Thu Jul 10 12:18:31 EDT 2008
    (Connector) :com.sap.netweaver.bc.uwl.connect.ConnectorException:Thu Jul 10 12:18:31 EDT 2008
    (Connector) :com.sap.mw.jco.JCO$Exception:'ashost' is missing
    Need help understanding how to make the change in configuration so that when an approval  workitem is clicked in the UWL it looks for the ISR applications on the portal server and not on the ECC server.
    Version info:-
    EP7 SP15, NW04s (server = xE2DB1)
    ECC 6.0 (server = xR2DB1)
    MSS BP (mySAP ERP 1.0)
    Thanks in advance for your help.

    We were able to resolve our issue.
    On our portal system we had to change the configuration of the system definition for the backend to use the WAS for the portal.
    System Configuration > System Landscape
    Pick your system definition
    Property Category: Web AS
    Description, Hostname, Path should be set appropriately for the portal.
    Ex:
    Desc: Arbitrary
    Hostname: portal_host_name:port
    Path: /webdynpro/dispatcher

  • Task not opening in UWL

    Hi
    I am receiving my workitems on portal in UWL. When I try to open any task ( SAP transaction is called) a error comes
    "Work item executed". if you try to reopen it then error comes "You are not a receiver of the work item".
    The UWL log displayed:
    External user [USSAGGARK] of external system [SAP_ECC_HumanResources] not mapped to a portal use
    External user [US1047] of external system [SAP_ECC_HumanResources] not mapped to a portal user
    Empty or null time zone value from backend
    External user [WF-BATCH] of external system [SAP_ECC_HumanResources] not mapped to a portal user
    Invalid timestamp 0 from backend system (for user 5841)
    Please help me to fix it.
    Thanks
    Vishal kapoor

    Hi Vishal
    I think task registration is needed when you are calling a WD (ABAP/java) screen . But in my case a SAP transaction is getting called. it has worked fine on other sites in the past without registration.
    If its working in other system check the configuration and compare both the system are identical. Then it will work. I guess the SAP transaction if you are calling without task registration then you atleast you need to do XML re-registration in portal. Take your task number and talk to EP team to do the XML re-registration in portal. I think it will give some clue.
    Regards
    vijay

  • WD application is not opening in UWL for custom workflow

    Hi,
    I have created entries in SWFVISU, and webflow connecter also has entries for my custom task .
    I can see work item in UWL but as soon as I click on workitem I am not able to see application or workitem .
    Kindly check screenshot.
    Regards,
    Vijay

    Hi Vijay,
    As prashanth said please activate the services in the SICF and generate the error once again and check the log in nwa-->trouoble shooting-->logs and traces -->developer traces and check the error their.
    Regards,
    Anil

  • Workitem does not open

    I have implemented workflow for releasing blocked invoice.In quality it is working perfectly fine but in production ,though the agent is receiving the workitem in his inbox but he is not able to open that work item. I have checked all things each and every thing has been transported from quality to production.I have also verified that the agent receiving the work item has the authorization for opening that item(TCode-MIR4). I am not able to find out where the problem is and how I can rectify it.

    Hi,
    Once the user clicks to execute the workitem does he get a message saying "No Administrator foound for the task"? If yes then go to the menu Settings->Workflow Settings->Refresh Organizational environment. It will work. If you get any other message let us know. We might be able to troubleshoot better.
    Hope this helps,
    Sudhi

  • Attachment Does Not Open in UWL

    Hi,
    Using a Background Method i have attached a '.PDF' attachment to the workflow. When open in r3 the Attachment works fine and it opens in PDF reader. But when the same thing is tried through portal, it say the file could not be found.
    Kindly Help.
    Thanks,
    Prashant Singhal

    Thanks A. Lavorenz
    after implement the SAP notes i followed your advice and now I can open attachments.
    Goto transaction SICF:
    a) goto EXTERN ALIASES
    b) add /default_host/sap/bc/contentserver
    c )add a user with password
    Very important the user must be a  type "system"
    Claudia Cerulli

  • Tasks not opening in UWL through LR script

    Hi,
    I am trying to script a scenario in SAP NW Portal. The scripted scenario looks like:
    1) VUser.init() section: A user logs in to the portal.
    2) VUser.run() section: The User performs few steps in the portal (UWL - WD Java).
    3) VUser.end() section: The user logs out.
    The intention is to achieve the following scenario during its run time:
    A user logs in, then perform actions defined in VUser.action() section in iterations and at last of the load test, the user logs out.
    Issue: The first iteration is always happening successfully but the second iteration always fails.
    Please help me in resolving the issue.
    Thanks & regards,
    Ankit
    PS:
    If I put all the transaction in VUser.action(), all the iterations pass.

    HI Arvind
    Try a piece of code to get all the tasks in your task list.
    QueryResult result = itemManager.getItemsForItemType(uwlContext,ItemType.UWL_ITEM_TASK, null, null);
    SO in result, you'll get all the task available.
    Thanks
    Puneet

  • Work items are not visible under UWL in portal ?

    Hi,
    We are upgrading from SRM 5.0 to SRM 7.0.
    We have observed one issue here. Workitems are not visible in UWL in portal.
    But workitems are available in SAP inbox. i.e SBWP.
    Completed items we can see in UWL.
    Could you please let me know any idea on this.
    Regards
    Venkatesh P
    Edited by: Venkatesh Padarti on Dec 9, 2010 8:28 AM
    Edited by: Venkatesh Padarti on Dec 9, 2010 8:29 AM

    Hi Venkatesh,
    Can you please share the solution? Which base URL was wrong and where did you correct that?
    Your help is really appreciated.
    I had post the same question at SRM workflow - work Item is not being displayed If you want to reply there. I will definitely, reward with points too.
    Thanks,
    Bhavik

  • Web Dynpro Application is not openeing from Portal UWL

    Hi,
    I have developed a WD application which is integrated in the portal. This WD application navigates through several levels of approval by triggering the workflow. Initially USER will create the request launching the WD application from portal and upon clicking the SUBMIT button -> Workflow will be triggered and Work item will be sent to Approver UWL list in the Portal.
    Link will be displayed in the UWL list and upon clicking that link WD application need to be opened where the details will be displayed and can approve the request by clicking on APPROVE button.
    Here, We have created a PFCG role which can be assigned to USER to access the WD application to create the request from portal. But for Approvers, we have not assigned any such roles except UWL role.
    Workflow is working fine, Workitem is displayed in Approvers UWL but when they click on the link -> WD Application is not opening. Configuration in SWFVISU is done.
    I think we are missing some roles which need to be assigned to Approvers. We cross checked by assigning SAP_ALL profile to the Approers and found WD application is getting opened and everything is working fine. But we are not supposed to give SAP_ALL in the PRD.
    Please help what are the other roles that need to be assigned to Approvers.
    Thanks,
    Bharath.

    did you try by assigning pfcg roles to approvers along with Uwl?
    Regards
    Srinivas

  • Workflow task on UWL does not open in new window

    Hi,
    Some of the workflow tasks in my UWL do not open up in a new window when i click on them. I notice that these tasks are not even hyperlinked (underlined). Instead, when i click on the line, a small pop up shows to options: Forward and Resubmit. Therefore i am not able to approve / reject these workitems.
    Whereas there are some other work items which open up in a new window on click.
    Is this problem related to workflow configuarion (perhaps enabling the WF for portal) or is it something to do with UWL configuration?
    Appreciate your help.
    thanks
    zubair

    Hi Paul,
    I face the same problem, any findings so far?
    Thanks!
    Best regards,
    Sandra

  • Workitems are not getting displayed in UWL

    Hi All,
             We have deployed ESS/MSS Business packages in our system. Also configured UWL to display workitems in portal. But when testing leave request, leave request workitems are not getting displayed in portal as UWL. Any help on this will be appreciated.
    Thanks,
    Krish.

    Hello,
    have created some new users and done with the leave request, it comes to backend inbox, but not
    visible in portal. Re-configured UWL, but still the task not coming( leave request). For other users it is > coming?
    Where have you created these users? Many times it is not enough to create new users in a backend system. You will have to create them in the data source which is used by the UME of your portal or to map this data source with the system where you have created your new users
    You can see what data source your portal is using by going to
    Portal --> System Administration --> System Configuration --> UME Configuration --> Data Source
    If this Data Source doesn´t contain your new users, then UWL wouldn´t be able to show their items.
    Here you can check if your user is contained in the data source:
    Portal --> User Administration --> choose the right data source --> put in the username --> search
    Please check if your users are correctly created.
    Regards,
    Iris

  • SRM7.0 Workitem is not showing in Manager WorkOverview(UWL)

    Hi Experts,
                       Work items are not showing in Manager->Work Overview->Task though it is available in SAP inbox for SRM 7.0.
    Regarding UWL configuration i have done bellow things:
    1. Created a system connector with SAP_SRM Alias
    2. Registered it.
    But the workitem is not showing in the Manager WorkOverview task tab.
    One more thing, when i checked the system connection (SAP Web AS Connection) form System Landscape, i got error message saying...
    6. The Web AS ping service https://saprst00.freescale.net:1443/sap/bc/ping was not pinged successfully. If the ping service is not activated on the Web AS, you can try to call the ping service manually.
    7. An HTTP/S connection to https://saprst00.freescale.net:1443/webdynpro was not obtained successfully; this might be due to a closed port on the Firewall
    I think may be this is one of the reason why work item is not appearing in the manager tab.
    Please guide me how can i solve  above issues..
    Thanks & Regards,
    Sambaran Chakraborty

    Hi Masa,
                      I have checked the SAP inbox with transaction SWI5, and for the particular user(with admin right) there is a Task TS10008126 with work item id 6407635.
    Now when i checked in the transaction SWI1 with the above work item id it shows the below information..
    ID:  6407635
    Work item type: Dialog Step
    Language: English
    Work item text: Approve shopping cart of JUDY SYDIONGCO with value 1,000.00 USD
    Creation date: 11/30/2010
    Creation time: 13:12:52
    Task: TS10008126
    Task Text: Approval of shopping cart
    Status: READY
    Priority: 9 Lowest
    Work flow id: 6407627
    Agent: No Agent Available
    Workflow:  6407629
    Administrator:
    Creator:  FLOWITEM  0000064076290000000109000000
    So from those information how can i check for correct approval.? as the workitem is available for the approver sap inbox(SWI5)........ and there is no Webflow connector error.
    Masa as i said i am also getting connection test failure error.. so is thre any chance due to this work items are not showing ?
    Thanks,
    Sambaran Chakraborty

  • PO Approval Items Workitems are not removed from the Universal Worklist UWL

    Hi,
    Certain of our purchase orders require approval, they are sent to the relevant approver via workflow to their SAP inbox (SBWP) and universal worklist.
    When the user executes the workitem (Approve or Reject) The workitem should be removed from the universal worklist and SBWP when refreshed.
    The problem we experiencing is that the Workitems are not removed from the UWL after they have been executed. The SBWP is behaving correctly and the items are removed.
    It is not all the workitems that have this problem, only certain ones - but there is no pattern.
    Thanks for the help.

    Hi,
    The user B approved the PR accessing the transaction SBWP or via PR transaction directly?
    If via PR transaction directly, then your workflow needs a Wait Event step.
    Regards,
    Kleber

  • Adobe interactive form(ABAP WD)size is increasing & not opening from EP UWL

    Hello All,
    Adobe interactive form (ABAP WD) size is increasing after cleansing data from MDM and the form is not opening from portal UWL.
    Same application is working fine in Dev and Qa environment. In dev and QA the form size is around 150 KB after cleansing data from MDM. Some reason in production it is more than 2 MB. FYI - We have multiple app servers in production.
    /Padmanaban

    Hi Babi,
    In the adobe form layout library Use the Submit(which internally means submit to SAP) button from the Webdynpro Native category.
    Only this button action can connect adobe to web dynpro.
    Whenever we click on this particular button the event will be trigger in the ONsubmit event of interactive form UI element in the webdynpro.There we can write our abap code.Hope this will help you.
    Regards,
    Simi A  M
    Edited by: amsimi on Mar 22, 2011 11:37 AM

Maybe you are looking for