Workitem is using data from old executed workitem.

Hello.
I have a workflow which has a step that will open transaction code PA40 for the user to update an infotype. Some fields will be already defaulted to some values and all the user has to do is to check the values in the fields and click on save.
Lets say I am the user and I execute the workitem in my inbox. PA40 opens, I check the values in the fileds and click on save. The Infotype record is created and I hit F3 to exit out. Doing that the workflow ends and I return to my workflow inbox. I stay in the inbox. Next, a new workflow is started, but with slight different data for the fields in PA40. Refreshing my workflow inbox, I can see the new workitem. When I execute the workitem, transaction PA40 opens, but the values in the fields are the same as the vaues in the previous workitem that I executed, istead of the new values the new workflow was started with. It seems like the values are buffered, or the session that the was created to execute PA40 is still "hanging" with my inbox. Any ideas?
Thanks
Lande

Hi,
Values cannot be buffered if its the same workflow as it a whole new instance...
What is your method like, i mean is it some custom method, if yes are you using coding that is writing to containers...
What happens when you normally process the transaction using PA40 with both the cases 1 by one...
Normally it happens due to issues with Dynamic Action...
Regards
Gautam

Similar Messages

Easiest way to transfer contacts/data from old phone (5) to new (6 and 6 ). I did "back up to this computer" for both phones. After activation (verizon) do I just plug into iTunes? One phone is still using iOS7 (is that a problem?, other is iOS 8.1.

What is the best/safest way to transfer contacts/data from old phones (5) to new (6 and 6 ). I did "back up to this computer" for both phones. After activation (verizon) do I just plug into iTunes? One of the old phones is still using iOS 7, will that be a problem? (the other has iOS 8.1).

The following has instructions on how to transfer to a new iPhone using either iCloud or iTunes: Transfer content from an iPhone, iPad, or iPod touch to a new device - Apple Support

How do i transfer my data from old iphone to new iphone

how do i transfer my data from old iphone to new iphone

You need to sync the data from your old iPhone, to the computer via iTunes. Once the data is on the computer, you then need to sync it to the new iPhone, also via iTunes.
http://www.apple.com/itunes/how-to/#video-sync - this is a link with a short video that teaches you how to sync your iPod / iPhone using iTunes
If you sycn with iCloud, you can also sync some of the data via iCloud. This may not work for all you music, if it was not purchased via iTunes.

Filtering using data from a spreadsheet in WebI

I need to convert a BO6.5 Full client report to a BO XI R3.1 WebI report. The report needs to use data from an Excel spreadsheet to filter data from a universe, and in 6.5 this was achieved by creating a universe for the spreadsheet data and using 'Select Query Results' as an operand returning this data in the report conditions. When we put this report through the conversion wizard the conversion fails.
Are there any other techniques that can be used in WebI that would allow me to use a spreadsheet to filter / join with a query from a 'regular' universe?
Thanks,
Steve Clarke

Thanks for the response! I'd be interested in writing a script for it (I've actually been researching it a bit already). I'm completely new to Javascript (and scripting) but have a fair level of experience with c/c++ so I feel it shouldn't be too bad. I'll ask here for now, just let me know if I should ask a new question on the scripting forum instead.
I've looked at the Acrobat JavaScript API Reference (http://www.adobe.com/content/dam/Adobe/en/devnet/acrobat/pdfs/js_api_reference.pdf) a bit but am having trouble finding a way to read the spreadsheet's data in (I was planning on using a csv file). I found Doc.importTextData(), which can parse a tab delimited file and from the sounds of it fill in the forms automatically (though I would much prefer a c style file interface that lets me write the parsing logic). Every time I try to call importTextData it returns -1 though, which means "Warning: User Canceled File Select". When I call it direct from the JavaScript Debug Console I just get a -1, but when I have it execute when I save I get "NotAllowedError: Security settings prevent access to this property or method.". I did a bit of research on that and modified my script to look like:
Autofill = app.trustedFunction(
    function ()
        app.trustedFunction(importTextData);
        app.beginPriv();
        var result = this.importTextData("test.csv", 0);
        app.endPriv();
        return result;
I've also tried running Acrobat as an administrator, but I still get the same error. I could just not be understanding privileges correctly.
My overall plan was:
    for each row in the spreadsheet
        - read the row in from the file
        - fill out the fields in the PDF using the read data
        - save the file with a new file name.
If there is a better method to do this, just let me know.
Thanks again for your time!

I have a PPC iMac 10.4.11 and will shortly buy a new i Mac. What is the best way to transfer all my HD date from old to new? Thank you!

I have a PPC iMac 10.4.11 and will shortly buy a new i Mac. What is the best way to transfer all my HD date from old to new? Thank you!

Migrating from PPC Macs to Intel Macs:
https://discussions.apple.com/docs/DOC-2295
How to use Migration Assistant:
http://support.apple.com/kb/HT4413?viewlocale=en_US
http://support.apple.com/kb/TS1963
Troubleshooting Firewire target disk mode:
http://support.apple.com/kb/HT1661

Accessing data from old hard drive connected to HP Pavillion 500-242ea

Recently i purchased HP Pavillion 500-242ea ( OS Windows 8.1) as my old pc died.I connected the old hard drive via Usb adaptor kit.The old drive shows up in device manager and file explorer and disk management as F drive but does not show volume. I know the old drive is not full and the drive is working as i can put discs in and they load up.When i click on the old drive-F drive- in file explorer 'Please insert disc' message pops up.Any one know how to access data from old drive which has IDE cable.
Please help need to copy imporatant files from old drive.
Thank you
This question was solved.
View Solution.

Just had to ask, do you know the difference between hard drive and CD/DVD drive? Don't get angry, read this.
You said " I know the old drive .......... is working as i can put discs in and they load up.When i click on the old drive-F drive- in file explorer 'Please insert disc' message pops up.'
All that implies a CD/DVD drive. You can not put a disc into a hard drive.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Transferred data from old I-Pad to I-Pad two, can't get online or e-mail

Just transferred data from old I-Pad to I-Pad two, both Wi-fI 3 G. Can't get online with new I-Pad--but can with old one. Suggestions? Will not use 3G with old one, only with new one. Have mobile-me account.

Hi,
Can't get online with new I-Pad
Try syncing with just the default apps, not apps you have downloaded. Then restart the iPad and see if it makes a difference.
Carolyn

Regarding transfer of data from old pernr to new pernr

Hi Gurus,
here i am with scenario,transfer data from old pernr to new pernr with out using actions type.
it is better can anyone tell me the function module for the above scenario.

Hi, 
What do you mean by new pernr?
Is the employee rejoined the same company in same country? - Then can change the employement status of the employee in IT0000 to active and the load other required data for this use REHIRE action.This will with only old pernr. (there is no new pernr concept. employee is just rejoining the same company in same country)
or if you have to use different pernr, then use to alteast use hiring action to create new pernr. I believe you are doing that . If you need to use old employee data from old pernr, then connect old pernr record with new pernr record using Reference Personnel Id concept of IT0031.
Please read the SAP document on help.sap. and go ahead.
If it is for different country also you can use IT0031.
I can copy paste the text from help,sap but it would look like junk. It better you and read through the document to understand the concept.
Then let me know if you need any help and do provide feedbk.
Good luck 
Thanks,
Amosha
 "Known is a drop & unknown is an OCEAN!"
Edited by: Amosha on Jun 25, 2009 11:42 PM

How to get useful data from request?

Hello.
I am looking for creating a management tool for a web site. All I want is that is there any ready to use API or package or open source project for retrieving user�s information? I just mean that is there any easy to use way in java to get useful data from a client (for example location, his or her system configuration and information �).
Thanks.

If you dump all the data from request (see the javadoc, and especially the "header methods" ) you'll see the data you can get are quite simple.
The only thing you can try to rely on are ;
- the IP address from the sender (when reversed to DNS, you can sometime use the tld to locate the country it comes from. Yet, you'll get many .com name, so it's not that significant. it may also give you the IAP used). Note that if the user is using a proxy, it's the proxy IP that you'll collect
- the User-Agent header : from this, you can guess the OS and the browser used
- the Referer header : usefull to get where your user comes from (where they found a link to your site)
- the Cookie header : if you're using a servlet container with session id stored in cookie, you should see the Cookie header appear on the second request to your site. That helps finding out wether your user accep cookie or not (from a server point).
Besides these, i don't think you can get any other useful data without asking your users on a form. Note that it's the client that decides to send Referer, User-Agent or Cookie headers. Those are not mandatory to the Http Protocole and some browser allow their user to fool their content (butmore than 90% of the widespread browsers don't)

Is that possible to transfer data from old apple id to new apple id becoz my old apple id is not working

Is that possible to transfer data from old apple id to new apple id becoz my old apple id is not working.

Merging of Apple ID accounts is not possible.

How to use data from standard view in Web dynpro for ABAP

Hello:
I have to create an Abap Web Dynpro, and I must use data from a standard view in the new one. Does anybody know what do I have to do?
Thank you and have a happy new year.

Hi Rodrigo,
Firstly, list the Standard component under Component Usage of the Component which you are creating in your View.
Second, In the Custom Component, view, goto context, and try to add the node from the Standard component in to your view.
NOTE: The second step requires a Node in component controller of the Standard Component.
Finally, Now in your view, get the data from that and map the data.
NOTE: To do this, I think you need to call your Standard WDA first and then only your node contains data and it will be passed.
I hope it is helpful.
Regards,
Shashikanth. D

New ipad I set up try to sync w ITunes gives me 2 choices set up as new iPad or use backup from old iPad

New ipad I set up now try to sync w ITunes gives me 2 choices 1 - set up as new iPad 2 - use backup from old iPad. I only want to sync it. What do I do?
Judy

You might want to try removing they email account and setting it back up again

I am attempting to have cells use data from a selective month from the year before so that I can show actual from the prio. years each month.

I am attempting to have cells use data from a selective month from the year before so that I can show actual from the prio. year each month. I need to create a spreedsheet using the the Acutlas from the year-to-date and from last year-to-date, but need to report each month.

Hi Tony,
Answering your question would be easier given a screen shot of the source table and one of what you want the summary table to look like.
Is the data you want for each month in a single cell o the source table, or does the summary table need to collect February's data (for example) from several cells and do some math with those numbers before presenting them on the summary table?
Regards,
Barry

How to backup data from old droid to turbo?

The turbo is not listed for new devices. How do you backup data from old droid to new turbo?

To start your backup: Sign in to your Google Account from your old Droid phone and do the following:
1. Go to Settings, Personal, Backup and reset, and.
select both Backup my data and Automatic restore.
2. Go to Settings, Personal, Accounts & Sync,
and select your Google account.
3. Select all of the option boxes listed, to ensure that
all available data is synced. After backing up your information, you will be able to set-up and sign in to your regular Google account from your new Turbo and all of your information can be transferred to the Turbo.

Have a combobox pre-filled using data from database

What would be a recommended method to have a combobox
pre-filled using data from database?

You can load an Array with the data returned from your
database and bind to that array as the dataProvider for the
comboBox.
[Bindable]
private var myArrayDP:Array = new Array();
//Load the array with your returned data.
<mx:ComboBox dataProvider="{this.myArrayDP}">
</mx:ComboBox>
Using an ArrayCollection however is often better if you want
changes to the dataProvider to automatically reflect in the
ComboBox.

Workitem is using data from old executed workitem.

Similar Messages

Maybe you are looking for