Workitem not received in SAP inbox(SBWP)- In SOST status is waiting

Hi Experts,
After executing workflow , I am not getting the workitem in SAP inbox.
I am sending mail using BOR Object type SELFITEM and method SENDTASKDESCRIPTION.
In SOST , status is in waiting  ( Send method - Remote ).
For Send method - via Internet its working fine . Mail is sent to external mail address. But for Send method Remote send requests are in waiting status.
SAPCONNECT job also getting executed every 5 mins in back ground.
SCOT-RML routing exists with Address area * , Node in use check box i, Node supports : connection test, status, trace , Supported address types - R/3 is checked.
Please let me know any other settings has to be done to send  workitem to SAP inbox.
Thanks & Regards,
Priya.

Hello,
"After executing workflow , I am not getting the workitem in SAP inbox."
You are confusing workitems with emails. SENDTASKDESCRIPTION = email.
regards
Rick Bakker
hanabi technology

Similar Messages

  • Workitem not receiving in workflow inbox

    Hi  All
      Workflow working fine in Dev110(development system), but not working in DEV130(Unittesting) . In Dev 130, once workflow is triggered through background proces(WF-BATCH), workitem is showing up in WF outbox... but not showing in WF inbox.
    Please suggest if you have any idea with detialed steps.
    Thanks alot!
    Ravi

    Martin
       when i stated workflow, Yes dialog workite created in DEV110,its howing like this in log details of dev 110.
    Background work item created        
    Execution started automatically     
    Work Item Processing Complete       
              9  Is Special is Associated
            525  Form Number 0000006833 fo
    Dialog work item created            
    but when i start workflow in DEV130,its workflow sucess full, when i go logdetails , its showing
    Background work item created     
    Execution started automatically  
    Work Item Processing Complete    
             9  Is Special is Associat
           175  Is ELL               
           198  Is NCLB              
           349  Decision Taken       
    note: here Iam creating position online form , i am passing specialad values.
    when special find its wants to take decision specied found. configuration everything fine , now already working in 110.
    pls Can u clarify where is the problem , how should i get message to workflow inbox.
    Thanks
    Ravi
    Message was edited by:
            ravi naidu
    Message was edited by:
            ravi naidu

  • SAP inbox forward to user STATUS 'READY'

    Hi Experts
    I have chanllenge with workflow item  from SAP Inbox in Production. I am trying to forward the workflow item to any of the  users from SAP Inbox(SBWP) and when i see the forward workitems its in status "READY".
    i have checked the workflow ID  in TCODE : SWI1...and shows the status as READY.
    i did refresh the buffer SWU_OBUF but the results are same as expliained above.
    can pls know...What would be the problem...
    Thank you,
    pasala.

    >But when the user checks his inbox he does not find the workflow item.
    Which user? A) The one who sent the item, or B) the one who should have received the item?
    If it is the case A, then this is normal. If you forward the work item to someone, it will disappear from sender's inbox. B) If the received doesn't receive the work item (and you are not getting any error message when forwardig), then something is seriously wrong...
    Regards,
    Karri

  • Receive email from outlook to SAP inbox SBWP

    hi,
    I want to send email from my outlook and want to receive it in the SAP system inbox (SBWP). Can anyone please help me.
    Thanks,
    Hiral Soni

    Hiral,
    there's a step-by-step guide in the SAP help:
    http://help.sap.com/saphelp_nw70/helpdata/EN/55/a8b538891b11d2a25a00a0c943858e/frameset.htm
    kr, achim

  • Not able to send mail to SAP Inbox(SBWP)

    When i create a new message in SBWP and send it to SAP Inbox, It is moving to outbox.  When I resubmit this mail , then it move to  SAP Inbox. Please Help me to solve this problem.

    Hi,
    When i create a new message in SBWP and send it to SAP Inbox, It is moving to outbox.
    When ever you send a new message (mail) from the SAP Inbox, Outbox will have a copy, Like sent items in the Outlook.
    When I resubmit this mail , then it move to SAP Inbox. Please Help me to solve this problem. code}
    When creating a new message, If you give the correct User Id in the recipient  it will go correctly. Click Refresh  in the SAP Inbox and check it.
    Regards,
    Surjith

  • Deleted workitems are moving from sap inbox to other inbox

    hi,
    The client is receiving the workitems which are deleted from sap inbox in their inbox. How the issue can be fixed?
    Thanks,

    Hello,
    "The client is receiving the workitems which are deleted from sap inbox in their inbox"
    How are they "deleting" workitems?
    What do you mean by "sap inbox" - the SBWP mail inbox or the SBWP workflow inbox?
    What do you mean by "inbox".
    A bit more clarity, please.
    regards
    Rick Bakker
    Hanabi Technology

  • The work item not coming in SAP inbox ....

    Hi experts,
    I am doing PR realese workflow.It is moved to quality server from development. In quality it is activated and showing no error.When a PR is created  mail is send to approver and the workflow is waiting for his approval. But the work item is not available in his SAP inbox. Even he is getting the remainder mails.But the work item is not available in his business workplace(SBWP).I cross checked user ids of approvers. But still its not working ....the mails are sent to approvers external mail ID.....
    Is there any configurations to make for making the SBWP active ?????
    Pls anyone give me a solution for  this problem...
    Thanks & regards,
    Jayaraj

    Hello,
    The best solution would be to take your mouse, move your cusror to the top part of your screen, and click on the "Before you ask (here are many workflow answers)" thread. If you've tried everything that is proposed there then please reply to this thread explaing what you have tried.
    Cheers,
    P.

  • Work item text not visible in SAP inbox

    Hi All,
    I have used standard task in custom workflow.
    On triggering task, workitem text maintained for workitem is not triggered under title colum in SAP inbox.Instead, workitem name is  visible in Inbox.
    Can you please guide how workitem text would be triggered?
    Thanks.

    Hi,
    Workitem text is associated with definition of task.
    There is no need to trigger it and it will be populated in the workitem created as part of the task.
    .Instead, workitem name is visible in Inbox.
    Inbox???
    You mean UWL.
    Cheers,
    Raja.D

  • Can we keep Decision workitem in two users SAP inbox after canel action ?

    I have a requirement like "  Decision workitem is going to two SAP Users Inbox , when one user opens the work item and choose the cancel and keep workitem in inbox in that case also its disappering in other user's SAP Inbox"
    is there any way to keep the work item in both users inbox when one person selects CANCEL AND KEEP WORKITEM IN INBOX ?
    Please give me your input.
    Thanks and Regards,
    veerabrahmam

    Rick Bakker wrote:
    Hello,
    >
    > Is this in SBWP or UWL?
    >
    > This seems to be the SAP standard in some scenarios. You could have the workflow test for Reserved and unreserve it but then what happens if it was reserved on purpose.
    >
    > regards
    > Rick Bakker
    > hanabi technology
    Hi Rickk ,
    it is SBWP
    it is intresting to see that case if one of approver reserves it for the purpose of evaluating later.
    the thing is our onsite  consultant asked like  is it possible to keep the decision in the two approvers SAP Inbox  after selecting cancel and keep workitem in the inbox.
    is that possible ?

  • SAP inbox-SBWP

    Hi all,
    I have activated WS 20000317-   BUS2038   CREATED,    BUS2038   INPROCESSAGAIN & WS 65400037     QMSM      RESPONSIBLEISCHANGED in configuration for notification workflow .My requirement is to send the notification automatically to the concerned person i.e person responsible field in notification screen .Now when I am checking in SAP inbox there are so many notifications of different types like breakdown , general & also preventive request which I have scheduled through background job i.e IP30 in workflow , overdue entries & incorrect entries group .
    Can anybody pl tell me why all these notifications are coming as these are not sent by anyone? Also what does these workflow, overdue entries & incorrect entries mean in SAP inbox?
    rgds
    rajib

    BUS2038-Created (WS 20000317) Work flow would be triggered at the creation of any notification in the SAP System. That is why whenever a notification is created either through IP30 or manually, the work flow would be triggered. The point to ponder here is that the notifications listed in the particular User inbox should have the same Person Responsible as the User. If not then there must be a problem as you have customized it to be emailed to the appropriate Person Responsible.
    The Over Due Entries are those entries for which deadline has been missed. Suppose the notification was to be performed on High Priority basis with start and end date specified. Now the person responsible does not complete the notification in the time specified in the notification then the notification would be moved from inbox to Overdue Entries.
    Incorrect Entries are those entries for which a correction is needed. There is either no Person Responsible given or the Person Responsible does not correspond to a user, any correction regarding the receiver of the email message.
    Regards...

  • PO workflow mail not sent to SAP Inbox

    Hi All,
    I have created a standard PO workflow WS20000075 , Task TS20000166 and in SPRO i have maintained Object type as "US"(user) and agent is maintained.No agent determination rule is maintained for the task.
    When i create and Save PO, system is not triggering workflow to my SAP Inbox.
    When i test the workflow using SWDD by giving PO number and release code, i am getting mail to my SAP Inbox
    What setting i am missing to trigger the workflow to my SAP Inbox as soon as i save my PO.

    Hi,
    I have verified the setting is SWDD -Basic data, event linkage and binding exists
    The event to workflow container details are given below
    &_EVT_OBJECT&                             &PURCHASE ORDER&
    &RELEASECODE&                            &RELEASECODE&
    &_EVT_CREATOR&                          &_WF_INITIATOR&
    Please let me know what setup is missing to trigger the workflow automatically

  • Agent is determining properly but workitem is not coming in sap inbox.

    Hello Expert,
                            In my workflow agent is determining properly. i have seen from workflow log.
    but the workitem(approval mail) is not coming into agents workflow inbox.the problem is happening in production.
    same workflow is running successfully in development. means workitem is coming in agents workflow inbox.
    i don't have authorization in  T CODES SCOT SO16 so I can check and suggest something.
    I want to ask that is it any config issue or something else.
    is there any other way so i can cross check.
    please help.
    thanks raj.

    Hi Rajib,
    Check in the workflow log in production for the user decision task what error message it displays. If it is stuck due to missing agents, then there is a possibility that you missed to transport the agent assignment for the workflow task. Check if the same was included in the customizing task that is transported.
    Also check if the buffer refresh was done after the changes were imported in the production system using transaction SWU_OBUF.
    Regards,
    Saumya

  • SAP inbox(SBWP) workitem should remains in INBOX

    Dear Experts,
                         I have created a workflow. I want to forward its workitem to someone else. But when I open the task, workitem comes to the outbox; and outbox don't have the forward option.
    My requirement is that; workflow should remains in the inbox when it is being opened and then user forward this workitem after displaying it and send to anyone as per his requirements using forward button.
    Regards,
    Sohail

    When you click/open the work item, it gets completed. That's why it is in the outbox. Completed work items cannot be forwarded (basically nothing can be done for them anymore). Most likely your step/task has been built in a wrong way. I have no idea what your step is supposed to do, but in 99% cases, when you have a dialog step in a workflow, there is e.g. some button that need to be pressed in order to complete the work item - for example "Approve" or something like that (depending on what kind of workflow process you are dealing with). And if you don't press that button, the work item will stay in your inbox. Steps shouldn't be completed just by clicking/opening the work item.
    You need to tell more details about your step. What is it doing (what happens when you click the work item)? Or perhaps you can share the code of the method that gets executed in the task?
    Regards,
    Karri

  • Items not visible in SAP inbox

    Hi,
    We have one workitem which is related to 'Deadline Reached'.  We can see 5 agents for this work items.
    But customer is saying that it is visible only for 1 user, rest 4 can not see.
    Even they can not see the 'Deadline Reched' folder in their inbox. We initially thought user could have Reserved he work items but t
    he does not.
    What can be the reason , please do let us know and how to rectify this.
    Regards,
    Sandeep Garg

    Hello,
    Look in the workflow log (SWI1) and/or in SWI5 to see what happened.
    What has probably happened is that one user has Reserved it. Then he is the only one who can see it.
    An Administrator can "replace" (un-reserve) the workitem via SWIA.
    regards
    Rick Bakker
    hanabi technology

  • HTTP messages not received by SAP PI system

    hi all,
    We are using SFDC integration , where we are receiving message using HTTP Sender CC. But these messages are not seen in sxmb_moni. How can we check if the messages are reaching SAP PI . What are the settings needed for HTTP communication in SAp pi. Please help.
    Regards,
    Vinithra

    Hello,
    You may need to turn on synch logging in ie. To do this type tcode sxmb_adm, then go to Integration Engine Configuration -> F9 (edit config) -> set LOGGING_SYNC to 1
    Hope this helps,
    Mark

Maybe you are looking for