Workitem remains in inbox even after execution

Hi all,
I am facing a problem with the removal of workitem from the inbox. I have searched the net and found that this problem has been faced before by people but I could not get any solution to this.
I have a workitem in the inbox. I click it and execute it. After completion when I return to the inbox, the workitem is still displayed there. A single refresh of the inbox also doesn't work. I need to log off and log on again to the portal in order to see the refreshed list in my inbox.
But the workitem doesn't get removed from the inbox as soon as it is completed. I can even click the same workitem second time and see the same screen again - but this is not reauired as the work is already done.
It seems to be due to some time delay between the synchronization of the ESS and the database.
If anyone has solved this issue before please tell me how I can remove the workitem from my UWL inbox as soon as it is completed.
Points are sure to be awarded for good answers.

Hi Sanghamitra,
Please apply the note 1501377.
Thanks!
Swarnaprakash

Similar Messages

  • Trying to set up iCloud on my MacBook Pro, and I get to the point where it tells me to view my email for further instructions to verify acct, but I have no email in my inbox, even after resending multiple times.

    Trying to set up iCloud on my MacBook Pro, and I get to the point where it tells me to view my email for further instructions on verification of my account, but there is no such email in my inbox, even after submitting multiple requests to resend the email. Any idea what I can do? Mark

    Well, running on a 2006 model.  I did not have a startup disc.  Initially, it booted up on original software in 2006.  Since then, I've upgraded to 10.6 via a box set.  And, since then I think I popped it up to lion. 
    All I have on a disc is snow leopard.  And, I can't get farther than the setup screen due to hard drive.  I'm taking to a apple authorized repair store right now.  We'll see what they tell me .  I'm just going to weigh the cost of repair vs. buying new.
    Another bad, stupid thing is I had no means of backing up my stuff.  So, I might have lost things like music, vids, etc.  we'll see if they can recover.  If the cost is too much for repair I might just forget it and start over with a new system.  Just not sure at this point.

  • Cannot get rid of "inbox" even after using other directions for doing so.

    After being cozened into installing "inbox" on my Mac, I could use "inbox" for nothing.
    My Mac runs OS 10.7.5.
    After installation "Inbox" seized first slot on my Firefox (16.0). Even after I thought I had done EVERYTHING to dump "inbox", "inbox" opens unasked.
    Scrupulously following directions, given in the next box, did not work either.
    Holding down the "option" key promised a safe mode restart, but Firefox would not open in safe mode within a more than reasonable time (10 minutes), nor did anything else appear. I gave up twice after choosing to restart in safe mode.
    Seek unambiguous advice that timely allows ridding my computer of all traces of "inbox" without wrecking anything else.

    See also [[/questions/785267]]
    Try to reset the prefs on the <b>about:config</b> page that refer to inbox.
    *Open the <b>about:config</b> page via the location bar and do a search for <i>inbox</i> via the Search bar at the top of the about:config page.<br />
    *Reset all <i>inbox</i> related prefs that appear bold (user set) via the right-click context menu to their default values.
    Try to reset some preferences to the default with the SearchReset extension:
    *https://addons.mozilla.org/firefox/addon/searchreset/
    Note that the SearchReset extension only runs once and then uninstalls automatically, so it won't show on the "Firefox > Add-ons" page (about:addons).

  • Workitem remaining in inbox.

    Hi,
    There is a workitem which a user processes to post a document. Upon successful completion, the workitem is still remaining in his inbox. It should disappear from the inbox once processing is done. Its not happening. Could anyone pls help me regarding this?
    Thanks in advance.
    Abhishek

    Hi Rob,
    I have checked the workflow log and the template. Yes its true that advance with dialog is set for this step in the wf and this is within a loop.
    But if i check in the workflow log the loop has not been executed even once.
    It is stopping at that task with state as "in process" in the very first pass through the loop.
    Also pls tell me what is the significance of the advance with dialog checkbox being checked?

  • PM order status remains as PCNF even after completion confirmation & TECO

    Hi,
    For some of the PM orders we created, the order status is till in PCNF and operation status in MCNF.
    We have done the following also
    1) Completion confirmation done for all operations
    2) "Fincal confirmation" and "No remaining work" tabs checked for all operation confirmations
    3) TECO is done
    But still the operations are in mCNF-Manual confirmation status and hence the order is is in PCNF.
    Please let me know how to change the order status from PCNF to CNF.

    Please check any Sub operation confirmation is pending or ? if so please do ( IW41 )
    Riyaj
    Edited by: riyajmaner on Feb 24, 2012 5:08 PM

  • Run time error in FMBB after execution of RGZZGLUX GETWA_NOT_ASSIGNED FM

    Hello Experts,
    We have activated funds management in Development it is working fine without any issues. Transported same changes to Quality system and executed Program RGZZGLUX.
    Issue: Run time error in FMBB transaction code even after execution of program RGZZGLUX. similar error in funds center group also.
    Category               ABAP Programming Error
    Runtime Errors         GETWA_NOT_ASSIGNED
    ABAP Program           SAPLFMBD_DATABASE_ACCESS
    Application Component  PSM-FM-BCS-BU
    Date and Time          10.06.2014 13:28:36
    Short text
        Field symbol has not yet been assigned.
    Requirement:  Please let us know how to solve this issue
    we have checked note:0000939958 - and changed Inactive status for tables FMIT, FMIP and FMIA, but no use, when we run program RGZZGLUX, it has deactivated this tables again.
    Regards,
    Chalapathi

    Hello Shyam / Javed,
    Thank you for your inputs.
    I have solved issue, now it is working fine.
    Activated EA-PS and included into transport request. executed program RGZZGLUX.
    Note used to solve issue :0000908007
    Regards,
    Chalapathi

  • Code continue to execute in same servlet even after request forwarded.

    Hi
    I have forwarded flow of execution in first line of my servlet.
    request.getRequestDispatcher("xx.jsp").forward(req,res);
    my class looks like:
    servlet
    line 1: request.getRequestDispatcher("xx.jsp").forward(req,res);
    line 2: some code
    line 3: some code
    Now what happens that even after execution of line 1........ line2 and 3 gets executed.
    But after execution of line 3 flow is forwarded to xx.jsp.
    How can i avoid execution of line 2 and 3.
    Please comment
    Thanks
    Edited by: money321 on Mar 5, 2009 9:06 AM

    Hi,
    Had this issue when I was a java newbie :)
    just place a return statment
    servlet
    line 1: request.getRequestDispatcher("xx.jsp").forward(req,res);
    return;
    line 2:  some code
    line 3:  some code
    }&lt;br&gt;

  • Messages remain in inbox after being deleted or moved to other folders

    Spent 2 hours yesterday cleaning out my in box, deleting and filing emails, only to find everything right back where it was? I have an exchange account and have never had this happen. Nothing has changed with anything on account or computer.

    I should mention that the transferred message also remains in my Inbox even if I delete it from my Inbox after having transferred it to another mailbox. Once I "delete" it from the Inbox, it will turn gray (from black), and will disappear if I hit Apple-L to "Hide Deleted Messages." But it will be right back again in the Inbox, as black as ever, the next time I return from another mailbox to the Inbox, even if I have chosed "Erase all Deleted Messages" in the meantime.
    This is very annoying. I'll sure appreciate help.
    Thank you.

  • Execution does not end even after all records updated..

    Hi,
    I have plsql code like :
    declare
    begin
    for x in ( select .......) loop -- about 4000 times
    for y in ( select ............) loop -- about 50 times
    end loop;
    -- some code goes here to manipulate clob data
    -- like creating free temp clobs - use - then free them
    -- Update statement that update some table using clob values.
    insert into tablex values(sysdate);
    commit;
    end loop;
    end;
    Here I can monitor from other window howmany records are inserted into tablex and howmany updated in update statement by...
    select count(1) from tablex;
    After 50 mins i can see that all records are updated but...
    plsql code does not end its execution it continues even after all records are updated..untill i have to kill the session or let be run for long time.. :(
    I can not understand why this it is not ending execution..
    What could be the problem ...

    Hi,
    Here it is.....
    declare
    v_text_data TableA.text_data%type;
    v_clob clob;
    type dummyclob_t is table of clob index by binary_integer;
    dummyclob dummyclob_t;
    v_str varchar2(255) := 'ddfsajfdkeiueimnrmrrttrtr;trtkltwjkltjiu4i5u43iou43i5u4io54urnmlqwmreqwnrewmnrewmreqwnm,rewqnrewqrewqljlkj';
    begin
    select data bulk collect into dummyclob from sfdl_clob; -- five rows containing clob data upto 1MB
    for x in (select object_id
    from TableA
    where object_type = 'STDTEXT' ) loop
    dbms_lob.createtemporary(v_text_data,TRUE);
    for y in (select '<IMG "MFI_7579(@CONTROL=' || ref_id || ',REF_ID=' || ref_id || ').@UDV">' temp_data
    from TableB
    where object_id = x.object_id) loop
    v_text_data := v_text_data ||
    case
    when trunc(dbms_random.value(0,7)) = 0
    then chr(10)
    else v_str
    end ||
    y.temp_data;
    end loop;
    select text_data into v_clob from TableA where object_id = x.object_id for update;
    if v_text_data is not null then
    dbms_lob.append(v_clob,v_text_data);
    end if;
    dbms_lob.append(v_clob,dummyclob(trunc(dbms_random.value(1, 6))));
    dbms_lob.freetemporary(v_text_data);
    insert into xyz values (sysdate);
    commit;
    end loop;
    end;
    Thanks for your time..:)
    Rushang.

  • Photos remain in wrong iPhoto list even after being moved?

    +Mike G.+
    +Posts: 297+
    +Registered: 15-Nov-2004+
    + Photos remain in wrong iPhoto list even after being moved?+
    +Posted: 29-Jan-2009 16:56 +
    Hi,
    +Has anyone else had this problem? Any workarounds?+
    +I have a number of pictures that just show up in the wrong place in Places' list view, but I cannot seem to move them. For example, a photo will show up as being in state X in city Y when it was actually taken at a "Place" in state A, city B. So I click on the photo, hit command-i, type in the name of a place in A/B, and hit done. (Pressing command-i again shows the new name and a pin in the correct place.) However, the photo still shows up when I select state X and city Y from the places browser. This persists even after restarting iPhoto.+
    +Any ideas?+
    +iMac (Mid-2007) Mac OS X (10.5.6)+
    +Mike G.+
    +Posts: 297+
    +Registered: 15-Nov-2004+
    + Re: Photos remain in wrong iPhoto list even after being moved?+
    +Posted: 16-Sep-2009 16:30 in response to: Mike G. +
    +Does not seem to be an issue with the latest version of iPhoto.+
    Im not sure why this has been closed as it is an issue for me as well,
    eg, Trafalgar Square photos appear in the London Eye pushpin, but when checking the photos individually they are correct.
    I am fully up to date with my software and this issue only appears to have raised itself on the latest version of iphoto (8.1 (415))
    Removing the locations and re-adding them does not fix the issue you just end up with the same result or a different mixture of incorrect pictures in the push pins.
    Message was edited by: Carn

    The best way to get assistance on the forum is to provide a clear and detailed description of the problem and report any steps you've already taken to solve the issue and anything that resulted therefrom.
    Im not sure why this has been closed as it is an issue for me as well,
    It's been closed because the User who had this issue found a solution. Only the person who creates the thread can close it. This person had no idea you even existed, let alone that you might have a similar issue. I'm sure if he had he'd have left it open, just waiting for you to come along.
    Is not a resolving answer to the issue and appears to be a very narrow minded approach to resolving issues!
    Let's see. Someone has an issue. They create a thread on the forum. They find a solution. They mark the thread as answered. This is narrow minded?
    Regards
    TD

  • Hi tutor,my system preferences remains in hang and it does not respond even after force quit.May i have a advice la

    my sytem preferences remains in hang and is not responding even after force quit,may i have suggestion la

    Hello: Welcome to Apple Support Communities!
    Could you specify the Mac OS X version and also what computer you
    are using it on, with some detail? Some of these kinds of issues, while
    they may seem the same across various years of OS X, can have
    different causes and also different cures.
    With that information, someone may be capable of researching a reply
    most suited to try & see if it works in your computer + OS X system.
    One idea, which may/may not help, would be to start the computer
    from its most recent OS X DVD install disc, unless it has OS X 10.7
    or Later, where there is a Recovery partition on the HDD to boot from.
    Then use Disk Utility> repair disk, while there, also repair permissions.
    Thanks.
    Good luck & happy computing!

  • SMS Inbox full, even after deleted tons of messages.

    It says my SMS inbox is full even after I deleted TONS of conversations. What should I do!? I already did reset all settings.
    Help please! =(

    for some reason it has to do with the iOS5 update that was released yesterday that I upgraded my 3gs phone on before buying a 4s today.  i've been frustrated with it but just figured it out or at least got mine to work. 
    i had spent a good bit of today deleting messages thinking that would do it.  i spoke to AT&T (clueless) where I got my new 4s phone today and did some research here on apple's website and was put on hold by an apple rep for an hour today.  from googling i found that your phone supposedly holds 75,000 messages but it must be less than that or have a different way of calculating it than you might think.  here's why.
    you have more messages than you think.  a lot of my conversations went back to 2008.  there was one person in particular that i had exchanged a good number of messages with but i wanted to keep those so after deleting messages all day and getting nowhere i decided to figure out how to export SMS messages that i wanted to save.  there is an app called SMS Export and that did the trick.  I ran it and was suprised to see that after all of my deleting today i still had 61,000 messages.  so i exported this one person I had exchanged 20,000 messages with and deleted her messages from my phone leaving me with 41,000.  i restarted my phone and when it booted back up the new texts starting flowing through, 17 in all missed today. 
    back in business!

  • Can we remain in the same state even after clicking submit button?

    Hello All,
    Can we remain in the same stage even after clicking submit button? Also it should remain in the same stage only when certain conditions are met. For eg:
    Condition : In Stage1, CustomFieldA default value is 'No'. To pass from Stage1 to Stage2 the CustomFieldA value should be made to yes.
    Scenario 1 : CustomFieldA value is 'No', and I click on Submit .
    Expected Result : should remain in the same stage
    Is above result achievable in PS 2013? I am creating workflow in Visual Studio 2012, so can I handle this in the workflow?
    Please help.

    The above answer was proved wrong, so please follow this link to get the answer.
    http://social.msdn.microsoft.com/Forums/en-US/8c75d74d-1ea6-4273-96cd-e70f5a5688fc/how-to-remain-in-the-same-stage-even-after-clicking-submit-button?forum=project2010custprog

  • When ever I customize the toolbar the open new tab sign that is the + sign near the lastly opened tab in the tab bar disappears and it remains so even after restarting Firefox.

    When ever I customize the toolbar, the open new tab sign that is the + sign near the lastly opened tab in the tab bar disappears and it remains so even after restarting Firefox. This happens only after updating to the new version 4.0.1 it never happened in the older versions 3.x.xx- checked it thrice. Thought it could be a bug and i didn't know where to report also don't have time and patience to search for the appropriate page so i'm reporting here for improving my favorite browser.

    You can find the New Tab button showing as a '+' on the Tab bar.<br />
    You can open the Customize window and drag the New Tab button from the Tab bar on another toolbar and it will become a regular toolbar button like the New Tab button that you have in Firefox 3 versions.<br />
    If you want the New Tab button at the far right end of the Tab bar then place a flexible to the left of it.<br />
    *New tab toolbar button: https://addons.mozilla.org/firefox/addon/new-tab-toolbar-button/

  • How to delete all my personal messages from my iphone..... even after deleting from inbox it is available in the search iphone option that is siri

    how to delete all my personal msg from my iphone..... even after deleting it fom inbox it is available in the siri option

    As stated in your first post, restore your phone as new.

Maybe you are looking for