Workitem stays in InProcess state

Hi Everybody,
I have created a custom workflow to send mail with PDF as attachment.I have an activity step which is creates calls the method of my custom BO and in the method I am calling a function module wherein I have all the code to Create a smartform and store it as an PDF in my C drive...
When I test the method in SWUD transaction it works fine but when I run the workflow the activity step stays in process and there is no error ...The required binding seems to be in place.
I am absolutely clueless regarding how to solve the problem ...So any help on this...
Thanks,
Narsingh

Hi,
Thanks for your reply,
But I am able to run the method without any problem in SWUD transaction...I tried the same thing in CRM 4.0 there also I am having the same problem.. workitem in inprocess state.
I checked the ST22 transaction and I find a short dump stating 'Exception Condition CNTL_ERROR raised'.
Could there be any problem is trying to call a function module from the method...
Regards,
Narsingh

Similar Messages

When I switch back to an ongoing application, from the switcher, it reverts to its own 'homepage' rather than the stay at the state/stage I left it at. How can I force applications to maintain the current state?

iPhone 4S with the latest updates 8.1.3 (12B466) installed.
When I switch back to an ongoing application, from the switcher, it reverts to its own 'homepage' rather than the stay at the state/stage I left it at.
How can I force applications to maintain the current state?
I am in the process of getting enough screenshots to demonstrate further.

ios7 keeps refreshing apps after switching
solcwd

After trying to update iBook application stays in waiting state

After Update iBook app, stays in waiting state . Will not open or able to delete.

Try this first ...tap the "waiting" icon and see if you can pause it. If it does pause, then tap it again and see if it will resume. If that works, repeat the same steps for each "waiting" icon.
If that didn't work, try this ....Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Depends On Resource stay in Waiting state after reconciliation

Hi,
I've come up with the following issue (which i though was handled ootb).
I have resource A which depends on resource B.
On user creation 1 access policy trigger provisioning of resource A. At the end of the creation, resource A is in waiting state.
Then we reconcile resource B account which appear in provisioned/enabled state in OIM. But resource A stay in waiting state.
If i revoke and re assign resource A access policy role, provisioning is fired.
Is there a way to have reconciliated resource fire provisioning for dependent resource ?
We are running on OIM11gR1 BP05.
Ps : i've found this topic about the subject but it's on an older version of OIM. I haven't been able to found anything relevant in patch notes
OIM - Issue with "Depends On" Objects
Thanks in advance!

Got some responses from oracle support on this issue.
They said that it was working as intended. Anyone already faced similar issues ? What step have you implemented to make it works?
Thanks!

Crystal reports always stay in queued state

When I run any crystal report, they stay in queued state forever.I have rebooted the appserver and process schedulerand cleared the cache,but the same problem persists.
Application:FSCM 8.8
Tools:8.47
What might be the problem and how can i rectify it?

It's possible that you have some previous Crystal processes that are in a non-final status. They may be 'stuck' in Processing or Initiated status. If the number of these incomplete processes has reached your maximum concurrent process level, then no additional Crystal processes will run until those incomplete processes are cleared out. I have also seen situations where 'Error' or 'Canceled' processes can prevent future processes from running.
If you have Crystal processes in anything other than 'Success' status, try deleting those processes through Process Monitor, and see if that allows your queued processes to start.

Jobs stays in waiting state but does not ever run in target system

This usually happens when there is a network problem or the target system is down for some reason. Is there a way to ignore the waiting status so that the next scheduled job runs would be affected? If not can CPS be configured to constantly request for the actual status of the job in the target system?

Hi,
Set the below parameter on the process server of the target system for which jobs stays in waiting state.
Parameter: SAP_MaxReconnectTime value: 60
Reason: Process servers tries to connect to Target system at the time when the network issue happens and due to that It does not connect to the target SAP system and all the jobs stays in waiting status.
When you set this parameter with the value (what ever you want in Minutes), it will automatically try to reconnect to the target SAP System at every 60 min (or the value provided) when ever it loses the connection with Target system and Jobs will start processing again.
Thanks and Regards,
Vipul Kaswala

CAD stays in talking state after hanging up a call

Hi I have the following issue
Problem description:
After the Cisco Agent Desktop completes a call and disconnects, the Agent stays in the Talking state instead of the Ready state. The agent must manually log out and log in to go into the Ready state.
This incident most likely occurs on this occasion:
The Cisco Agent Desktop takes a call and the remote caller hangs up first. Then the Agent hangs up.
We use:
CUCM version 6.1.4.1000-10
CCX 7.0
CAD 6.6(1) Premium version
Workstation runs Windows Vista Pro
Part of the text in the problem description was copied from this link:
http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_tech_note09186a00801cce5d.shtml
The problem description is an almost perfect match for what we experience, however the solution does not apply. Neither does the CUCM version.
Anyone have an idea?
thanks

Hi
I've seen this before. It turned out to be a bug with the CUCM version:
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?caller=pluginredirector&method=fetchBugDetails&bugId=CSCtb77537
Regards
Aaron
Please rate helpful posts...

Making a horizontal menu button stay in same state when I move cursor down to submenu buttons?

Hello! I realized as I was typing the subject of this post that it was near impossible to describe without being confusing. So I'm going to let some screenshots do most of the talking. **DISCLAIMER: Ignore all formatting besides the "Parks" button for now**
First picture, the cursor is not on the "Parks" button. Second picture, I have rolled over the "Parks" button, changing the color of it (to the "rollover" state color) and revealing the submenu buttons. Third picture, I have moved the cursor down to the submenu buttons, and the main "Parks" button goes back to that original color. How do I get it to stay in the other color when I am rolling over submenus? In other words, I want the "Parks" button to stay light blue when I rollover/click the other menu options.
A good example of what I mean can be found on the header menu of http://www.generalassemb.ly
Thanks! Hope this wasn't too confusing.

KGLAD - sorry i couldnt get that to work when i applied it to my own objects / instances...
there must be an easier way...
I am playing an FLV on my main stage and was trying to use the generic operators defined in flash for the play / pause buttons:
mc_MyVideo.playButton = mc_Play;
mc_MyVideo.playButton = mc_Pause;
Then i tried to modify this code to swap the buttons between each other on stage:
mc_Play.onPress = function(){
            mc_Pause._x = 339.55;
            mc_Pause._y = 12.2;
            this._x = -100;
            this._y = -100;
mc_Pause.onPress = function(){
            mc_Play._x = 339.55;
            mc_Play._y = 12.2;
            this._x = -100;
            this._y = -100;
the buttons work fine controlling mc_MyVideo when both are shown in different locations on the stage and without any other code.... but the moment i try to assign another function to either of them they stop controlling mc_MyVideo.
the closest i came was with an attachMovie function... when i pressed mc_Play it would start the movie and attach "mc_Pause" at the same time... thats the farthest i got...
- Pat

Request stays in Authorizing state even after approval

I've been trying to debug this for days now and it completely breaks my lab - until it fixes itself after some random time and then breaks again
I created a simple approval workflow which seeks approval from [//Target/Owner] when joining an Owner Approval Group. The request makes it to the Group Owner, but when the group owner approves the request, it stays stuck in Authorizing state and the user
doesn't become a member of the group. The WF also remains in Running status even after the request is approved.
I've seen some similar problems around on the internet, and all seem to suggest Exchange related issues. I don't have an exchange setup in my lab, but I don't think not being able to send an email would completely break the approval process. Besides, it
does seem to spring back to life randomly and it all starts working again before breaking - very intermittent.
I've been messing around with the PS WF activity (which I use to calculate custom approvers), but I have disabled that WF completely for now and I'm just using OOTB activities and approvers.
Any suggestions on what the issue could be (apart from exchange)? There are no errors in the event logs either, but there are loads of exchange related errors/warnings which are expected. Alternatively, is there somehow I can disable the "feature"
where FIM tries to send an email?
Thanks

Yep, the approval responses are generated but the request still stays in Authorizing with the workflow in Running state.
What makes this even more bizzare is the intermittent nature of the issue, it just seems to resolve itself after some time then break again.
One thing I have noticed is that the problem starts when I use my custom WF to add approvers to the WF dictionary - the first activity is a powershell activity which calculates the approvers and the next one is the OOTB approval activity which sends an email
to [//WorkflowData/Approver]. However, the PS script runs just fine, and the approver gets the request but after approval nothing happens (although approval responses are generated)

BUPA_MAIN stays in Intermediate state Function Module missing

We noticed that on our Productive system, since yesterday most
of the BUPA_MAIN BDOCs status are in yellow "After qRFC step (intermediate
state)" since last two days on PRM. Before it was working fine.
We got o SMW01 & re-process it, then we get a short dump which says:
" Function module "/1CRMGC/CGBUPA_MAIN_RRR" not found."
We compared in th eTxn: SBDM the BUPA_MAIN on Production & Test systems.
We found that the Module "/1CRMGC/CGBUPA_MAIN_RRR" is not there in Production but it
is there on other systems where its working.
Please let us know how we can generate this,
Is it the normal process to Generate on the dsired system in our case production directly? or do we do it in Development & then Transport it.
We have this bug in Production and fix this asap.
Thanks
Regards
Rahul
Edited by: Rahul Kumar Lal on Sep 2, 2010 1:50 PM

Hi Rahul,
Goto Trxn. GNRWB -
Generator Group : REPLI
Industry : Consumer Goods
Select BUPA_MAIN on L.H.S. and all Generators on the R.H.S.
Click on Generate/Check icons.
or you can goto trxn . SMOGGEN and select BUPA_MAIN.
Tnx,
Rohit

Failed BEXANALYZER gateway errors stay in DISCONNECT state

When I check SMGW I can see gateway errors for BEXANALYZER. Normally the parameter gw/conn_disconnect would cleanup these sessions (session w/ state of DISCONNECT). But this parm does not cleanup registered server programs.
Any ideas how these can be removed?
AL08 will show "old" users - in this case failed RFC's so it is misleading.
Thank you.

Hello Agus
The error message indicates that the dispatcher process was not able to
deliver a NOWP message to a user context that does no longer exists.
This happens if a batch process issues an asynchronous RFC that shall
send a response when it finishes. However, the batch job does not wait
to collect the answer.
When the dispatcher tries to pass the result of the aRFC to the batch
process, it realizes that the context that issued the RFC no longer
exists and prints out the message.
YOu can safely ignore the message.
And for more information, Please refer to the notes:
27617     Syslog Q0G, scratch area too small
191234    Syslog: Q0G K request (type NOWP) cannot be ...
681085 Scratch area is too small, opcode 6
62239   Termination when maintaining syslog filters
This information should help a lot.
Regards,
Paul

ODI 11g Scheduled job stays in running state

Hello All ,
In ODI operator in the integration process ,there arer 3 scenarios scheduled .
When the first is completed it switches to second ,but the next step/process keep running and never comes to an end,though the corresponding backend activity has been completed(which the scenario is supposed to do).
Which ultimately results into timeout.
Please suggest a solution for this.
Thanks in advance ,
ABHIJEET

Hi,
Actually your syntax is exactly right for running a single run-immediate job.
it looks like the slave running your job may have crashed or terminated unexpectedly. You should do a stop_job (force=>true) on your job and you should look through your job slave trace files j0trc for reasons why your job slave did not finish the job. You can also try grepping your job slave traces for the job name 'TEST_JOB' to find the right trace.
Hope this helps,
Ravi.

Cancel and keep workitem in ready state in user decision step

Hi,
In a user decision step,there is a default option 'Cancel and keep the work item'.
Now clicking on this option, the workitem goes into "Inprogress state"
whereas i want to keep the workitem in "ready state" after i click on the option 'Cancel and keep the work item'.
I am trying to modify the Process method of Decision Object type to incorporate this funcationality by using FM "SAP_WAPI_PUT_BACK_WORKITEM.
but im getting the error that this FM cannot be used at runtime.
Place where im trying to call this FM:
After the FM'SWU_PROCESS_MANUEL_DECISION'
I am getting the value of RESULT.
If result is SPACE or sy-subrc is not 00 then i am calling this Fm which takes Wi_id of the userdecision as input.
Kindly help
Regards

Hi,
Let me ask you this. Why you need to have this in "Ready" state, Not in "IN PROCESS" state. Anyway, the witem is still there in the user's inbox, and if you have any deadline monitoring, then this is also taken care with "Cancel and keep xxxx". So, i think, functionally you'll still be better with the existing functionality.
And, with all this, if you are still trying to change, then i think it's NOT possible. If i understand correctly, you are trying to use the FM "SAP_WAPI_PUT_BACK_WORKITEM" within the PROCESS method. And, if you understood the functionality of how this works, you are trying to set the status of the SAME witem for which you are executing the PROCESS method.
THe way i understand the behind-the-scenes process, once you make a decision and save, this method is the one which in turn sets the witem status. And within that, you CANNOT capture the status as it is yet to be posted to the Witem tables.
Probably, after this decision step, use a different background task with the above FM to set the witem status to "Ready", BUT NOT IN THE SAME METHOD of PROCESS.
Also, it's not advisable to change this std. method.
Hope this helps you. Reply,if you need more info.
venu

How to use elapsed time function with state machine in Lab VIEW

Hello
I've been trying to use state machine with elapsed time function in order to sequentially start and stop my code. The arrangement is to start the code for 1 minute then stop for 5 minutes. I've attached the code, the problem is when I place the elapsed time function out of the while loop it doesn't work, on the other hand when I place it inside the loop it does work but it doesn't give the true signal to move to the next state.
Could you please have a look to my code and help me to solve this issue.
Regards
Rajab
Solved!
Go to Solution.
Attachments:
daq assistance thermocouple(sate machine raj).vi ‏436 KB

Rajab84 wrote:
Thanks apok for your help
even with pressing start it keeps running on wait case
could you please explain the code for me, the use of Boolean crossing, increment , and equal functions
Best Regards
Rajab
OK..I modded the example to stop after 2 cycles. Also recommend taking the free online LabVIEW tutorials.
run vi. case statement goes to "initialize", shift registers are initialized to their constants. goto "wait"
"start"= false, stay in current state. If true, transition to "1 min" case
reset elapsed timer with True from shift register(counter starts at zero)."time has elapsed"=false, stay in current state(1 min). If true, goto "5min" case
reset elapsed timer with True from shift register of previous case(counter starts at zero)."time has elapsed"=false, stay in current state(5 min). If true, goto "1min" case. Also, bool crossing is looking for "true-false" from "5 min" compare function to add cycle count.
Once cycle count reaches 2, stop while loop....
Attachments:
Untitled%202[1].vi ‏42 KB

Issue working with states (FW CS5)

Hi all,
Here's my thing: when I save a file and open it up again some time later, all the pages will be set in in the first state (which is shown at the top of the states panel). That's very inconvenient for me. I'd like the page to stay in the state in which I put it. Is there a solution or a workaround?
Another thing what's happening when I open up a saved document, is that some objects don't show themselves when I activate a different state of the page where the object is placed upon. It's showing up only after double clicking the object (and open up the object view, the page is grayed out) and the return to the page view. Pretty unhandy.
Also when saving: FW will always show the first page in the document, not the last page I've worked on. I'd like it to see that specific page.
Any help would be appreciated very much.

Hi Linda,
thanks for your reply, but it doesn't solve my problem. I'm not putting pages on states. I do add states to pages. My main issue now is this:
What's happening when I open up a saved document, is that some objects don't show themselves when I activate a different state of the page where the object is placed upon. It's showing up only after double clicking the object (and open up the object view, the page is grayed out) and the return to the page view.
It's very important for me to resolve this, since other people working with my file otherwise only see white space instead of objects.
Thanks for your help.
Robbert

Workitem stays in InProcess state

Similar Messages

Maybe you are looking for