Workitem to be retained in inbox

Dear Experts  ,
for upgrade project from 4.7 to 6.0 , Workflow is not working properly in ECC 6.0 though activated .When I want to retain message to inbox and hece checking 'Confirm end of prosessing '  for the particular task, the checkbox remains in disabled state in change mode in tcode SWDD .
Thanking you all ,
Regards  ,
SA

SA,
It should not happen. Are you are doing confirm end of processing for background task, I am sure you are not, but this is one of case when this check box is disabled.
Why dont you go to PFTC, enter the task no. and open in change mode and try there.
I think SWDD in ECC 6.0 doesn't allow you to change standard task.
Cheers
Jai
PS: Sorry IA, Didnt saw your post.

Similar Messages

  • Decision WorkItem is not coming in inbox

    HI,
    I have created a customized workflow, in which i am showing a  document and then taking user decision on that document wheather to reject or approve the document. The workflow is running fine in client 100. But in testing client 200 it is not showing decision step to the user. After showing the document it comes back to inbox and don't ask for the decsion as its doing in client 100. 
    Workflow is not showing any error. It is going to decesion step but not doing anything.

    HI:
    Check with the Basis consultant that did any body changed the password of the WF-BACTH user ,
    it might happen some times if the user password is changed then the workitems do not reach to the Inbox
    Another option you have to execute the function module RH_LOCAL_INBOX_GET to check if the workitem is being picked.
    Next one SWWORGTASK and SWWUSERWI tables and check your user name should have prefix 'US'.
    Regards
    Shashi

  • After successful execution Workitem still remains in the Inbox.

    I am sending CG56 workitem to sap inbox which contains two terminating events approve and reject. same task ( cg56 ) is used 3 times in the workflow sequentially.
    First & Second  time it reads  the terminating events and the workflow process further
    But for third time when the workitem in the inbox is processed successfully, workitem is still seen in the INBOX with status in process. The Terminating event (approve or reject) is fired but the workflow log shows the event has not terminated the workitem and wofkflow has not proceeded further as if no event was fired.
    Now when i try to again execute the same workitem that is in status inprocess and come back without updating the trancation, the workitem disappears and now the workflow log shows the the third step is executed and workflow proceeds further.
    I am not able to understand the problem.
    Please help.

    Hi pavan thanks for you reply ...
    There is only one task. but used 3 times in the workflow. this task has two terminating events.
    If you read the query now you should able to understand the issue.
    Thanks.

  • Workitem not received in SAP inbox(SBWP)- In SOST status is waiting

    Hi Experts,
    After executing workflow , I am not getting the workitem in SAP inbox.
    I am sending mail using BOR Object type SELFITEM and method SENDTASKDESCRIPTION.
    In SOST , status is in waiting  ( Send method - Remote ).
    For Send method - via Internet its working fine . Mail is sent to external mail address. But for Send method Remote send requests are in waiting status.
    SAPCONNECT job also getting executed every 5 mins in back ground.
    SCOT-RML routing exists with Address area * , Node in use check box i, Node supports : connection test, status, trace , Supported address types - R/3 is checked.
    Please let me know any other settings has to be done to send  workitem to SAP inbox.
    Thanks & Regards,
    Priya.

    Hello,
    "After executing workflow , I am not getting the workitem in SAP inbox."
    You are confusing workitems with emails. SENDTASKDESCRIPTION = email.
    regards
    Rick Bakker
    hanabi technology

  • Workitem not receiving in workflow inbox

    Hi  All
      Workflow working fine in Dev110(development system), but not working in DEV130(Unittesting) . In Dev 130, once workflow is triggered through background proces(WF-BATCH), workitem is showing up in WF outbox... but not showing in WF inbox.
    Please suggest if you have any idea with detialed steps.
    Thanks alot!
    Ravi

    Martin
       when i stated workflow, Yes dialog workite created in DEV110,its howing like this in log details of dev 110.
    Background work item created        
    Execution started automatically     
    Work Item Processing Complete       
              9  Is Special is Associated
            525  Form Number 0000006833 fo
    Dialog work item created            
    but when i start workflow in DEV130,its workflow sucess full, when i go logdetails , its showing
    Background work item created     
    Execution started automatically  
    Work Item Processing Complete    
             9  Is Special is Associat
           175  Is ELL               
           198  Is NCLB              
           349  Decision Taken       
    note: here Iam creating position online form , i am passing specialad values.
    when special find its wants to take decision specied found. configuration everything fine , now already working in 110.
    pls Can u clarify where is the problem , how should i get message to workflow inbox.
    Thanks
    Ravi
    Message was edited by:
            ravi naidu
    Message was edited by:
            ravi naidu

  • Can we keep Decision workitem in two users SAP inbox after canel action ?

    I have a requirement like "  Decision workitem is going to two SAP Users Inbox , when one user opens the work item and choose the cancel and keep workitem in inbox in that case also its disappering in other user's SAP Inbox"
    is there any way to keep the work item in both users inbox when one person selects CANCEL AND KEEP WORKITEM IN INBOX ?
    Please give me your input.
    Thanks and Regards,
    veerabrahmam

    Rick Bakker wrote:
    Hello,
    >
    > Is this in SBWP or UWL?
    >
    > This seems to be the SAP standard in some scenarios. You could have the workflow test for Reserved and unreserve it but then what happens if it was reserved on purpose.
    >
    > regards
    > Rick Bakker
    > hanabi technology
    Hi Rickk ,
    it is SBWP
    it is intresting to see that case if one of approver reserves it for the purpose of evaluating later.
    the thing is our onsite  consultant asked like  is it possible to keep the decision in the two approvers SAP Inbox  after selecting cancel and keep workitem in the inbox.
    is that possible ?

  • WS14500028 BADI WF for Bid Invitation:  No workitem is sent to the inbox

    Hi All,
    I was tasked to troubleshoot the existing workflow of the client.  The workflow was able to determine the approver who will receive the workitem for his/her approval. However, the workitem is not seen in his inbox.  Since there has been no workitem passed on to the approver's inbox, the workflow stays hanging and the document could not be converted to PO and Confirmation.
    What do you think may cause the problem? Does it also involve the implemented BADI? Does the BADI only determine the approver or does it also control the workitem to be passed to the approver?
    Please let me know your recommendations and suggestions to this problem.
    I'll generously reward points for helpful answers.
    Kindest regards,
    Reymar

    Hi Masa,
    How are you?
    I think I've met you before here in the Philippines (I just started learning workflow that time). 
    I was able to do those steps. However, the log says that the BADI WF for BID Invitation No. xxxx, GUID xxx has a waiting status and there is no icon present under the agent column.
    What do you think is the problem?
    Thanks for your response.
    Regards,
    Reymar
    Edited by: Reymar Ellazo on Mar 12, 2008 11:57 AM

  • Retaining SAP Inbox Items

    Hi,
    Is there a way of retaining the SAP Inbox items. They get vanished after being processed from the Inbox. Is it a configuration which will define the no of days to keep the work item in SAP Inbox.
    Regards,
    Ravi G

    No replies

  • Deleted workitems are moving from sap inbox to other inbox

    hi,
    The client is receiving the workitems which are deleted from sap inbox in their inbox. How the issue can be fixed?
    Thanks,

    Hello,
    "The client is receiving the workitems which are deleted from sap inbox in their inbox"
    How are they "deleting" workitems?
    What do you mean by "sap inbox" - the SBWP mail inbox or the SBWP workflow inbox?
    What do you mean by "inbox".
    A bit more clarity, please.
    regards
    Rick Bakker
    Hanabi Technology

  • Two similer workitems comes in agent's inbox

    Hello Friends,
    I had created a custom workflow for the release of Purchase Requisition(PR). Here I need 2 levels of approval for items whoose value is above a particular amount. So based on the release group & release strategy, the workflow will deliver workitems into the inbox of the agents for approval.
    My problem is, the workitems will appear in agent's inbox twice. Even if we complete a workitem execution, the other will remain in the inbox as not started. I tried by assigning single users to task as well as to activity. But the problem remains.
    How can I rectify this problem ? Please help me.
    Regards,
    Abijth

    Hello Sanker,
    Sorry for being late on my reply. I was out of station due to some reason.
    Your assumptions were correct. I was using 'RELEASESTEPCREATED' event. I have to use 2 levels of approvals, because based on the net price of the PR item, the Release Group & Release Strategy will give 2 Release Codes. The client's requirement is to have separate level of approvals for each release codes.
    In scope of this situation, how can I solve this problem?
    Regards,
    Abijith

  • Workitem is not appearing in inbox

    Hi Friends,
    I am creating workflow for sales order approval/rejection. For this I am using one decision option 'change sales order' in user decision. After pressing this decision option sales order will appear in change mode. Upto this part it is working fine. But the problem is without changing any value if I press 'Back' or 'Cancel' button, the workflow is getting dissapeared from the workflow inbox. Because of this reason I could not able to do the changes once again. How to rectify this?
    Regards,
    Steve

    Hi Ahmed,
    I tried on what you said. Some what it is fine, but it is creating problems if I cancel the dialog box and once again trying to change the order. Sales order is not appearing at all. Kindly clarify.
    Thanks and Regards,
    Steve

  • Workitem is not avilable in approver inbox

    HI,
    shopping cart is triggered with approver .
    but the workitem is not avilable in approvers inbox .
    pls let me know the possible reasons.
    regards
    venga

    there is a table called "SWWUSERWI"...
    Go to se16 and type the table name and press enter
    Provide with username and execute...
    It will display list of workitems in his inbox....
    This way you can check whether workitem is there in his inbox or not
    once you find there are workitems...go to T-code swi1 provide the workitem id to see the details of that workitem id...
    Rg
    sam

  • Workitem in Outlook inbox

    Hi,
        My requirement is to send a workitem for Approval/Rejection to a user's Outlook inbox. Can any one send me the sequence of the required settings i have to do to send a workitem to a user's inbox.
    Steve

    Hi SD,
    Yes indeed, you can Approve Reject your workitem from Outlook.
    You need to do some settings in SAP and it works.
    Talk to your BASIS to configure SCOT settings.
    You need to schedule a report RSWUWFML2 in background which sends the workitem to Outlook.
    Cheers,
    Aditya

  • Removal of workitems from Inbox for specific user

    Hi,
    Can anyone tell how to delete mass workitems from a specific user's inbox.
    For example if there are some 4000 workitems in a user's inbox, how can we delete all the workitems by not seleting one by one and deleting.
    Thanks&Regards,
    Pavan

    Hi,
    you can use tcode : SWWL to do that...
    This is not the right fourm for asking this ???? it should be under BPM.
    Atul

  • POWL : CATS Workitem forward still visible in fwd'ing Mgnr inbox

    Hi
    I'm not sure if this is a standard behaviour but would like to confirm on how it works. I have a CATS workitem (WF) created by an employee which is assigned to Manager MGR1. The Manager MGR1 forwards the work item to MGR2. Now in POWL with some config & customization i can see workitem in the detail view of the MGR2 inbox but the workitem still exists in MGR1 inbox. Wondering if this is a standard case if not what would be the approach to fix it? appreciate any helpful hints
    Inbox accessed via POWL (NWBC)
    thanks

    no it's not standard, once the task is forwarded to another manager that task will disappear from his list.
    Check your custom configurations once, is it fetching the all tasks irrespective of forwarded work items check condition.

Maybe you are looking for