Workitem to temporary assignment

Dears,
Our workflow agent determination is designed to fetch positions as the agent. for some duration a temporary assignment will be assigned to the position. In this case, the permanent assignment will be not be removed. Hence we get two agents during this time. My requirement is to fetch the temporary assignment only during that period. is there any standard way to achieve this? if not, any exits can solve the problem? let me know if you have come across the same situation.
Thanks & regards,
Sudhahar R.

Hi-
Hence we get two agents during this time. My requirement is to fetch the temporary assignment only during that period. is there any standard way to achieve this?
If i understand correctly, only for certain period of time, temporary assignment (for a position) will be active and the workitem needs to be processed only by this temporary assignment- approver and not by the actual approver
Means actual approver should not have the workitems in their inbox for the certain period and after that, he/she should have the workitem and not the temporary assigned -approver
You could check this BAdI- WF_BWP_SELECT_FILTER. Basically this BAdI will filter the workitems based on the implementation. I am not sure, this BAdI will work if you use UWL. You can try and update us
Vinoth

Similar Messages

Time Manager's Workplace and Employee temporary assignment in Shift plannin

Hello fellow SAPPERS,
I trust that this mail finds you all well.I wonder if you could help me
1. With the temporary assignment of employees to another org unit using the shift planning section of TM, will i be able to see those people temporarily assigned unedr my reporting structure within PTMW as the line manager.
2. How do i default the people/employee list on PTMW that are reporting to a specific line manager or supervisor without having to do a selection of a specific org that one is reposible to. Is it STD and backed up by user exit. I know you have to set the ID's for selection condition in IMG. But i would kik eto find out how do i default the reporting structure/list of employees without having to first make selection via Org unit?
Many Thanks
Sher

Hi,
Note that I am not sure of my answer:
1) It won't work because what you assign in shift planning doesn't change his "real" assignement.
2) Right now I don't remmeber but I think it is possible... I am suppose to spend time exploring deeper PTMW, I'll let you know if I found something

Workitem and Agent assignment

Hello,
Well, I have critical requirement.
My requirement is, there is an activity USER DECISION in a workflow. Now, that activity has a standard task automatically assigned to it. That standard is of type general task. The activity has a role assigned to it, which executes at runtime.
Now, whenever the step is being executed, a work item is being generated.
So, in this way there are a number of workitem are generated. I want the tables that would join the workitem number with the Role number or the User assigend to that activity.
Please help.
Warm Regards.
Abhijit.

Hi Arghadip,
Thanks for your continuous input.
Well, I am not able to find the item TOP_WI_ID in table SWWWIHEAD. Well, I have found out all the dialog work items by setting the value of WI_TYPE as W.
This gives me the work item and the task related to that.
Now, how can I relate the workitem and the task to the Rule assigend to the activity as I have to run the report and I cannot go manually to find that.
Please help....
Warm regards.
Abhijit.

I'M AN AMERICAN ON TEMPORARY ASSIGNMENT IN ITALY AND CANNOT GET TO ANY HELP SOURCE ONLINE OR BY THE PHONE NUMBERS LISTED ONLINE. I'M TRYING TO RENEW MY ONE TO ONE SUPPORT PROGRAM AND THE "RENEW NOW" LINK DOES NOT WORK! HELP!

APPLE SENT ME AN E-MAIL WITH A LINK TO RENEW MY ONE TO ONE SUPPORT. THE LINK DOES NOT WORK. AFTER I LOG INTO MY APPLE ACCOUNT AND CLICK "RENEW NOW" FOR ONE TO ONE, AN ERROR MESSAGE APPEARS SAYING "PAGE NOT FOUND". AMAZING. WHEN I TRY TO CALL THE TOLL FREE APPLE SUPPORT NUMBER FROM MILAN, ITALY WHERE I AM NOW LIVING, IT DOESN'T WORK. THE ITALIAN SUPPORT DESK APPEARS TO BE AVAILABLE ONLY ON WEEKDAYS DURING NORMAL BUSINESS HOURS. HOW CAN I REACH A LIVE APPLE SUPPORT PERSON?

Start by going here - https://expresslane.apple.com/GetproductgroupList.action?locale=it_IT
Best of luck.

Workitem assignment on User workplace - FS-CM

There is a issue on workitem assignment to user(agent), there are more
workitem which is not assigned to user.
How to know exactly findout those workitem which is not assigned to
user(agent).
Where to find the user details to whome the workitem has been assigned.
Not finding the same in SWWUSERWI table.

I think you can give a try to the FM SAP_WAPI_GET_WI_AGENTS
SWL_WI_DISP_ACTUAL_AGENTS
SWL_WI_DISP_EXCLUDED_AGENTS
SWL_WI_DISP_POSSIBLE_AGENTS
SWL_WI_NOTES_DELETE_AGENT
SWL_WI_POSSIBLE_AGENTS_ASSGIN

Netweaver - agent assignment to the workitem in UWL

Hi ,
1.How is the Standard task of sap r/3 bound to the workitem(which shows the web dynpro java screens) in Universal Worklist?
2.How the agent of this workitem is decided/assigned?
Thanks and Regards,
Hemalata

Hello,
Good, Extended Notifications should always be used (where available) instead of RSWUWFML2.
You say:
"I am sending my workitems into outlook using the extended notification. I can aopprove and reject the workitems from the mail."
Could you say how you did that - approve and reject from the mail? Are there buttons in the email?
Other people have been asking this in the forum.
You also say:
"However, i need a functionality where user can click on the logon link and approve/ reject from workitem."
Why would anyone want to go to the workitem if they can approve/reject from the mail?
In the link to the UWL, does it include the workitem number?
regards
Rick Bakker
Hanabi Technology

How to assign agent at runtime

Hello gurus,
I have a small querie.
My requirement is when a workitem is received by a possible agent and he is not responding eventhough he receives repeative mail. I want to assign the new agent at runtime when the actual agent is received more than 4 workitems for the same task.
It means 5th workitem should be diverted to new agent.
Thanks in advance.
Please help me out.
Thanks & Regards,
Siraj Md.
Edited by: siraz ahmed on Dec 15, 2009 3:52 PM

Hi,
1. specify a counter Variable between the loop and increment the counter once the counter is reached 4
if Counter > 4 then
Specify the new agent id in dialogue task
You want to assign the agent at runtime means we have two options
1. Go to SWIA-> Give the dialogue workitem no -> Select Assign possible agents tab -> Specify the agent id at runtime
2. SBWP ->Select Work item ->Workflow settings ->Maintain Substitution

Error KI235 - Account requires an assignment to a CO object

Hi gurus,
I just wanted to ask re: thjs issue of ours wherein we can't release a billing document to accounting (VFX3) and system issues error message - KI235 (account assignment missing). In OKB9, the profit center assignments have already been set. The problem seems to originate from 1 item in the document wherein the profit center is not populated, thus no CO object can be obtained. I checked the material for that line item to verify why the profit center is not being populated automatically. I found out that the material is non-valuated goods.
The question now is, what do I need to do to push through with the transaction? I checked in VF02, and unfortunately, we cannot manually input the Profit Center from there. Any suggestion or help is very much appreciated.
Thanks

Hi
To rectify the billing document, please proceed as follows:
Option 1:
1. Cancel the billing document
2. Modify the sales order to include profit center
3. Then, create the billing document which will have profit center assignment.
Option 2:
1. Maintian the relevant cost center for that cost element (temporarily) in KA02
2. Then release the billing document using VFX3.
3. Remove the temporary assignment of cost center to CE.
Regards

Workitems getting stuck at expired users

Hi,
We have a case where workitems get stuck because the assigned users have expired validity.
At the time of assignment, one user is set as agent. Then that user gets set to expired, however the Workitem still is assigned to that one user.
This will create an issue where invoices are not handled at all.
I'm thinking that this must be a common workflow issue, or that there must be a common solution - that you guys know how to solve
BR
Lasse

As Rick said, definately some kind of escalation process should take place in invoice handling process. If approver does not approve the invoice in time, it will be escalated to approver's manager or whatever (or the invoice will return to accounts payable clerk, etc.).
Now since you already have the problem, you need to somehow monitor the situation. You can for example try monitor the work items with SWIA (look for all invoice approval tasks that are in status READY in In PROCESS).
Regards,
Karri

Read current workitem ID inside Programmed Binding code

Hi Experts,
In one of the workflow we have some approval steps (for FI documents), which creates items in Useru2019s inbox. Now we want to develop a report which shows how much time an approver has taken to approve a particular payment.
SOLUTION APPROACH: The approach we had taken was to capture the workitem ID in a programmed binding of the task container, which can then provide the start and end timestamps (for the workitem ID and hence) of the approval step.
ISSUE: The issue is the task container doesnu2019t have the recently generated workitem ID for the step. It gets populated to the task container after the programmed binding is executed. So, we are now stuck up as to how to read the workitem ID.
Additional Information: While debugging I could find out that the workitem ID gets generated by the class CL_SWF_RUN_WIM_LOCAL in method CREATE_VIA_WFM. But it doesnu2019t get assigned to the task container until just after the CREATEWORKITEM_CONTAINER method which executes the binding operations. In short the programmed binding code gets executed just before the workitem ID is made available to be read and used. See the code snippets of the class below.
The workitem ID gets generated in method CREATE_VIA_WFM.
*- get next number
      l_wiid = _get_next_number( ).
      me->set_wiid( l_wiid ).
The binding operations get executed a little late in the same method.
*- set properties via method (with dependant data or default data)
      me->m_workitem_context = _create_workitem_context( ).
The workitem ID gets assigned to the task container just 2 line after the above line.
      me->_set_workitem_container( im_check_oblig_parameters = 'X'
                                   im_container = l_container ).
      me->_set_workitem_object( ).
I have already tried a number of generic workflow related classes (eg. CL_SWF_RUN_WIM_FACTORY), but couldnu2019t read this workitem ID.
Any suggestions or pointers regarding this would be well appreciated.
Thanks and Regards
Barada

Hi Karri,
            Thanks for the reply. Honestly I wasn't expecting someone to answer on a weekend.
I had gone through the wiki section for programmed exits but wasn't very sure if that would help or not. Now after you suggested I am feeling a little more confident about going ahead with it. I was actual hoping someone would suggest that.
About the question regarding the actual requirement, I want to capture the workitem ID of a decision step once it is created (even before executing).
My earlier approach was obviously because my incomplete understanding of the use of programmed binding.
Let me take a try with programmed exits and I will update the thread once I am done.
Thanks
Barada.

Oracle BAM 11g report to view WorkItems

Hi,
I have a requirement wherein we need a report displaying WorkItems summary.
The scenario is as follows:
SCNERIO: There's a BPM process in which human tasks are created for different types of approvals. Once a workitem is created corresponding to a human task and assigned to the corresponding user, need to display that in BAM report. Also, the BAM report should have the provision of searching and displaying the workItems based on Assigned User/Title of WorkItem etc. The report will have two panels,one having the dropdowns with various search criteria and a Search button. Once a search criteria is chosen and Search button is clicked, the details of the workItem should be displayed in the other panel.
Questions:
1. Is this possible using BAM 11g?
2. If yes, how and which report type to use?
3. If No, what could be the alternative way of implementing?
Any inputs would be really helpful,thanks.

have u gotta any solution for that ?

AFS ATP Problem

Hi All,
I'm having a problem right now with an AFS material that is promising against a purchase order that has already been fully promised against. Material 1000, grid C, has a PO in the system for 75 units. There are orders saved that total up to 75 units that have been promised against, and show up as T - Temporary assigned in the stock/requirement list. There is no 100-C stock showing in A - Available. However, when additional orders are placed, these orders are not giving a J0 rejection reason for insufficient stock - they will still show a full 75 units free to be promised against, and anything over 75 units will split and J0. I have checked the material master and the Availability check field is set to no lead time, which will cause the material to J0 when there is no available stock. We have used this same material in past seasons with different grids and have not seen this happen. Does anyone know what would cause this material do try and double-promise against this PO?
Thanks for any help!
J

Hey Padman,
I have a 2-D grid created for shirt sizes (collar size and sleeve length). That grid is assigned to a finished material w/ the AFS Status flag set.
However, when I do the MIGO transaction for the movement type 561 is specifies that I still need the size. The problem is, I do not receive the error message for a finished non-AFS materials. For example, a blank shirt, w/ no grid.
Regards,
Marat

Change subject of mail provided by Report RSWUWFML2

Hi
I am using program RSWUWFML2 to generate Notification with executable attachment for workitems that are assigned to a User. The requirement is to change the Subject line or rather increase the number of characters that appear in the subject line. Presently the System Id along with workitem text appears and the the Workitem text is getting truncated.
Is there any way to change this subject of the mail that is generated from this program? The Workitem text should change accordingly with respect to Workitem Text.
Thanks
Arghadip
Message was edited by:
        Arghadip Kar

Hi Arghadip,
This is a tough one but have you lookat at what happens in the form SEND_MESSAGES around the line
    IF l_body IS INITIAL.
*     If there is no text, we create a default text.
      l_body = 'This work item has no description.'(m06).
    ENDIF.
Have you tried changing l_body in debug at this point and seeing if the output is what you want. I have tried in the past but been hit with a 50 character limit around where it is used as a SOLI transfer, but this part is worth a look.
Good luck
Gareth

Can´t create an afternoon Outlook calendar item on iCloud

I am using iCloud to synchronize items with my Mac. Outlook is configured with three calendars, its native calendar tied to my Outlook email address, a second calendar that I do not use tied to a generic email address that I do use, and the iCloud calendar. I am on temporary assignment in Mexico and the standard language setup is the following: OS menus are in English. Outlook menus are in English. Email text editing language is Spanish. Calendar items are in Spanish. The date format is Spanish using a.m. and p.m.
If I try to create an item in my iCloud calendar from Outlook, it will not allow me to specify a time in the afternoon. Any attempt to do so still results in getting an appointment for the same time in the morning (or, rather, very early morning). For example, I create an appointment for 2 p.m. It ends up being for 2 a.m. If I change it to 3 p.m., it ends up being changed to 3 a.m.
The workaround is to set up the item in the Outlook calendar for either of the email addresses, then dragging it into the iCloud calendar. Alternatively, the incorrect item in the iCloud calendar can be dragged into the Outlook calendar, adjusted to p.m., and then dragged back into iCloud.
Naturally, this does not happen on the Mac.
Is anyone aware of a fix for this?
The Mac is a MacBook Pro running Mavericks, but this problem really happens independently from the Mac. The version of Windows is Windows 7 Enterprise, 6.1.7601 (SP1). I am using Outlook 2013. iCloud control panel is 3.1.

Taken from the main screen of the iCloud.com website:
"To use iCloud, first set it up with your Apple ID on a device with iOS 5 or a Mac with OS X Lion."
Did you follow this advice?

TS30000020 - IDOC error message

Hi All,
In our production system, we had some workflows got stuck up with SWF_RUN 609 error message. So i tried using SWPC
transcation to resume those workflows. I worked fine. But some did not show up in SWPC and so i used SAP_WAPI_ADM_WORKFLOW_RESUME Fm to resume, it also didnt work. So i searched through sdn and some other sites and found out the standard report "RSWWERRE - Report for restarting workitems with temporary errors", and tried that. My workflows got resumed. But over 2500 new workflow with TS30000020 and description "EDI: Incorrect status for inbound IDoc" got triggered without any agents and it went all users. Iam not aware of IDOC. Can anyone suggest why this has happened and how should i overcome this?
Regards,
Kevin.
Edited by: kevin.jk on Jul 27, 2011 7:54 AM

Hello,
RSWWERRE is normally scheduled to run periodically (usually every 20 mins) to handle temporary errors.
I'm not sure about how these IDOC workflows got started. If they're not necessary then you can logically delete them.
If you look in the IDOC workflows, when does it sya they started? Recently?
regards
Rick Bakker
hanabi technology

Workitem to temporary assignment

Similar Messages

Maybe you are looking for