Workitems not showing up in UWL of Subsitute for approve working time

Hi All,
We have ECC 6.0, EP 7.0, ESS and MSS BP 1.0 and we have the following requirement.
We are using approve working time functionality to approve deviations for Employees.The approval is done in single step i.e  by immediate Line manager .
The Workflow task used in the CATS profile is TS20000460.
The problem is that we cannot receive the substituted Manager's workitems in the substitute's UWL; we can also see the filters which allows us to filter off the workitems for "My Items" and "Items on Behalf Of.....".
Can anyone help me out with what needs to be done . Is there some customizing settings needed or some other workflow task which i need to use.
Thanks a lot,
Manish

Hi siddarth
Thanks for the reply ..
I understand the point and had already tried doing the Substitution from the UWL itself.But the problem is that after doing the sunstituion and making it active we are still not able to recieve the workitems in the substitute's UWL.
Cud this be problem with the Workflow task . If yes please let me know if there is one which i can use or if there is something to be done with the settings and activation of the UWL's .
Regards
Manish

Similar Messages

  • Can we approve working time in UWL without  MSS web appl?

    Hello Friends,
    I have a doubt thats bugging me for the past one week, I have a requirement where an employee enters working time through portal and the manager should approve through the portal.
    I have configured ESS and also the backend, thus when an employee enters his working time and releases ,  a workitem is created in the managers inbox at the backend.
    I am using the approval reports RCATSB01 for approving working time in the backend.
    I am planning to do the UWL config so that managers can access workitems through portal, <b>Can i use this approval report to approve working time in UWL or is it mandatory to use "Approve working Time" web application from MSS</b>.
    Regards
    Sriram

    Hello Ashutosh,
    I have given the visualization parameters for task TS31000007
    APPLICATION :  CatManagerApprove
    PACKAGE :   sap.com/msscatapproval  in SWFVISU
    Then followed the UWL config guide and did minimal configration
    Created a sytem in system landscape (alias UWL_SYSTEM) and registered in UWL
    registered all item types for the system.
    Now i can able to see the workitems in the UWL but when i click on the work item Approve working time i get an error
    Portal Runtime Error
    An exception occurred while processing a request for :
    iView : pcd:portal_content/every_user/general/uwl/com.sap.netweaver.bc.uwl.uwlSapWebDynproLaunch
    Component Name : com.sap.portal.appintegrator.sap.WebDynpro
    Exception in SAP Application Integrator occured: Application URL ':///webdynpro/dispatcher/sap.com/msscatapproval/CatManagerApprove;jsessionid=(J2EE17580000)ID0079084450DB21042082377319897423End' is not valid! Please check the protocol and host entries for system 'UWL_SYSTEM'..
    Exception id: 03:13_24/07/07_0037_17580050
    See the details for the exception ID in the log file
    There is already system file   com.sap.pct.erp.mss.001 . do i need to do any changes to the config files.
    Regards
    Sriram

  • Due date is not showing up in UWL

    Hi ,
    Due date is not showing up in UWL. Back end is ECC not GP Just regular work flow.
    I can see in workflow object end date kind. But the field is blank. For due date any additional configuration needed.
    I really appreciate your help.
    Regards
    Mark

    Hi,
    As far as I remember correctly, the Due Date in UWL is the Requested End date in the workflow. So basically you need to open the workflow in backend in WF builder and look at the step. There is a tab for setting different deadlines and stuff. If you do the settings there (for example set the requested end in 3 days), I think that work item will display the due date based on that data.
    Regards,
    Karri

  • I just installed Yosemite.  Notifications Center will not show ICal entries that were on my ICal at time of installation.  How do I get events to show in Notification Center?

    I just installed Yosemite.  Notifications Center will not show ICal entries that were on my ICal at time of installation.  How do I get events to show in Notification Center?

    Submit your feedback requesting this feature directly to Apple using the appropriate link on the Feedback page:
    http://www.apple.com/feedback

  • Adobe Photoshop Elements 12 for Mac does not show up in Applications. Tutorial for editing from iPhoto shows selecting the Adobe software in Applications. Am I missing a step in registering product?

    Adobe Photoshop Elements 12 for Mac does not show up in Applications. Tutorial for editing from iPhoto shows selecting the Adobe software in Applications. Am I missing a step in registering product?

    I answered my own question: There's a difference between "download' and "install." Hunt for "install" (1.5 hrs in my case) and line up your passwords, Adobe ID, etc, then install. Took 15 min. The right choice shows up in Applications. Now it's on to figuring out why photo selected for edit in iPhoto does not show up on screen in Elements.

  • I live in the UAE and i dont have the face time app on my iphone 5 and it's not showing in the settings list as well only face time mentioned in the notification center , my friends in the same area are using face time normally any advice?

    i live in the UAE and i dont have the face time app on my iphone 5 and it's not showing in the settings list as well only face time mentioned in the notification center , my friends in the same area are using face time normally any advice?

    Doesn't matter.  That store is likely selling illegit iphones, brought oin from somewhere else.
    The fact remains the UAE government does not allow Facetime on iphones legitimately sold there.

  • HT201263 my ipad 2 3G crashed while playing an HD movie on iOS 7.1, then it enter into rcovery mode, i tried itunes restore and it fails showing unknown error (27), i retried for about 100 times with no benefit.... any ideas or help please

    my ipad 2 3G crashed while playing an HD movie on iOS 7.1, then it enter into recovery mode, i tried itunes restore and it fails showing unknown error (27), i retried for about 100 times with no benefit.... any ideas or help please???

    By the way, i am using Windows 7 x64 and updated itunes

  • MSS: Approve working time Program "       " not found error

    Hi,
    I am able to enter working time and release in ESS. CAT2, CAT4 and CAT6 are also working fine. Im using the Approve Time sheet data iView in MSS to approve working time.  Im not sure if I did all the required configuration in IMG Approve working time.But when I click the iView I get a Java exception as shown below. Pl find the ST22 dump also. Can you please let me know
    1. What could be the problem.
    2.What are minimum configuration to be done in IMG Approve working time.
    com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Program                                          not found., error key: RFC_ERROR_SYSTEM_FAILURE
         at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
         at com.sap.xss.hr.cat.approve.blc.FcCatApprove.rfcExecute(FcCatApprove.java:307)
         at com.sap.xss.hr.cat.approve.blc.FcCatApprove.init(FcCatApprove.java:276)
         at com.sap.xss.hr.cat.approve.blc.wdp.InternalFcCatApprove.init(InternalFcCatApprove.java:200)
         at com.sap.xss.hr.cat.approve.blc.FcCatApproveInterface.onInit(FcCatApproveInterface.java:136)
         at com.sap.xss.hr.cat.approve.blc.wdp.InternalFcCatApproveInterface.onInit(InternalFcCatApproveInterface.java:133)
         at com.sap.xss.hr.cat.approve.blc.wdp.InternalFcCatApproveInterface$External.onInit(InternalFcCatApproveInterface.java:313)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:920)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:889)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1082)
         at com.sap.xss.hr.cat.approve.vac.dd.VcCatApproveDrillDownList.onInit(VcCatApproveDrillDownList.java:
    ST22 dump
    Error analysis                                                                    
        An exception occurred that is explained in detail below.                      
        The exception, which is assigned to class 'CX_SY_PROGRAM_NOT_FOUND', was not  
         caught in                                                                    
        procedure "BUILD_TABLE_STRUCTURE" "(METHOD)", nor was it propagated by a      
         RAISING clause.                                                              
        Since the caller of the procedure could not have anticipated that the         
        exception would occur, the current program is terminated.                     
        The reason for the exception is:                                              
        On account of a branch in the program                                         
        (CALL FUNCTION/DIALOG, external PERFORM, SUBMIT)                              
        or a transaction call, another ABAP/4 program                                 
        is to be loaded, namely " ".                                                                               
    However, program " " does not exist in the library.                                                                               
    Possible reasons:                                                             
        a) Wrong program name specified in an external PERFORM or                     
           SUBMIT or, when defining a new transaction, a new                          
           dialog module or a new function module.                                    
        b) Transport error                                                            
    Regards
    Srini

    Starting a new thread

  • I can not activate my iphone to be used for the first time, it is blocked. how do i unlock. can someone help me

    I can not activate my iphone to be used for the first time, it is blocked. how do i unlock. can someone help me

    dis the activation server is not available try again later or contact tech support.
    has no sim card installed more already tried with the sim card still not of.
    bought in china.

  • Link in User Decision step not showing correctly in UWL

    Hi SAP Experts,
    I have a requirement to add a link in a user decision step, this link triggers a custom webdynpro for additional input. When I access the workitem from Business Workplace, the link is showing fine. But when I execute the workitem in UWL, the link is not displayed, instead the code is shown (<a>...</a>). Please advise on what I should do to have the link working. Thanks in advance.

    Hi,
    This same thing was just recently discussed. I just cannot find the thread anymore (well, in that thread there was not really any solution). Basically the hyperlinks in work item do not seem to work in UWL as they should. I don't know if there are any way to make them work. My suggestion is to not use the hyperlink at all and replace that with an action (=button) to the task in the UWL. This can be achieve quite easily by simple XML configuration in portal. If you have worked with UWL this should be quite straightforward for you, or if there is a consultant at the site, who is familiar with UWL, this should be simple for him/her.
    Regards,
    Karri

  • Bookmark Toolbar entries not showing up in blank space allocated for them under Navigation Toolbar.

    Using Firefox 3.6.13 and 4.0b8. Both are not showing up my Bookmark Toolbar entries. The item does exist. I've used Firefox for years and that toolbar has always showed up. Confirmed that it still exists and was not inadvertently trashed by viewing item and listing when opting to Manage Bookmarks. The item is checked off for display in the menu drop-down (View-Toolbars-Bookmark Toolbar), the space where it would normally display my entries shows up directly under the Navigation Toolbar, but it is blank with no entries displayed.

    In the View menu select Toolbars, and then Customize to open the customize toolbar dialog. With the customize toolbar dialog displayed, there should be an icon with the label "Bookmarks Toolbar Items" on the bookmarks toolbar. If it is not there, drag and drop the icon called Bookmarks from the customize toolbar dialog onto the bookmarks toolbar. There will be 2 icons called Bookmarks, the one you want will have an icon that looks like a sheet of paper (it does on Windows, I believe it is the same on the Mac).

  • I have a mid-2010 iMac and just purchased a 2TB TC, can't join existing wireless network with AC standard so attached to iMac via ethernet with TC wifi turned off.  How do i access TC now? not showing up in disk utility or on desktop. working fine with TM

    I have a mid-2010 iMac and just purchased a 2TB TC, I just found out that it can't join existing wireless network with new AC standard so attached to iMac via ethernet with TC's wifi turned off.  How do i access TC now? not showing up in disk utility or on desktop. It is working fine with TM.  My cheeper seagate drives etc kept crashing, so i didnt trust cheeper back up options anymore.  Connected those drives to TM via firewire and could see the drives and access them.
    Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed.  I heard that bridging slows down everything and then there can be port issues with mail etc.  I connect to the internet via airport only and it is pretty fast. Getting over 50mbs downloads and over 30mbs uploads.  Plus everything in my home it connected to my fios router, airport express for music streaming, two apple tvs, vuezone camer system.  I really didn't want to monkey around too much with my system.  But are there other options to connect the new TC.  Can't find info anywhere for this and called apple who gave me the info above.  after hanging up, i see that i cant access my TC and I am wondering if i would have to reset it to turn wifi on again to make changes to the drive, turn off blinking light  or repair it in disk utility if it should become corrupted.
    For other with similar issues i did solve some other problems: when i connected it to my ethernet port on my iMac wifi stopped working.  Found that I had to turn off the ethernet in the system>network screen, but then TM didn't see the TC so i restarted after changes and then it saw it.
    Now a rant.  I can't believe in this wireless age that Apple would make a product that cant join a wireless net work.  The apple rep said i could return it and look for the previous TC that would join an existing wireless network.  Are we going backwards?
    Thanks!
    lennydas

    Ok... it is getting a bit clearer but there are still some questions.
    I connect to the internet via airport only and it is pretty fast.
    I was assuming airport in this statement in your first post meant the TC or the Express.. but I now realise we are still in the mass confusion stage where apple calls everything wireless an airport. So what you mean is the airport internal card of the computer??
    Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed.  I heard that bridging slows down everything and then there can be port issues with mail etc.
    I think this is mistaken.
    Putting the TC in bridge mode plugged into your FIOS will not slow the network.. nor will it cause mail or port issues.. in bridge the TC is just a fancy WAP and switch plus the network hard drive.
    If the computer is close it will be faster than the FIOS.
    You can run both wireless networks with different names.. so it is clear which is which. But you can also setup roaming so the computers themselves pick which is the best wireless.
    I tried extending the wireless net work and tried joining wireless network, but the TC kept crashing and I had to keep resetting the TC.  the Apple support person said these, extend wireless network and joint wireless network, are no longer a connection option with the new TC because of the new AC protocol.
    Thanks again!
    You cannot extend to a non-apple wireless router.
    You cannot use join a wireless network because when you do the ethernet ports will be cut off.
    But that has not changed.. I don't think Apple support is correct.. there has been no change with the AC model.. it is simply a fact that apple routers do not work in join wireless mode other than as a dumb client. The same applies to AC as to the earlier version.. but I have asked another person to check this.
    Join in the express is the only apple router that still allows an ethernet connection.
    For now you best use of the TC is bridged to the FIOS. Wireless you can sort out between several options.

  • Printers do not show up in Page Setup Format for menu

    Hello. I just installed Acrobat 9 Professional. Upgrade from AP7. For some reason, when I go to select the printer in the Page Setup> Format For> dropdown menu, the printers do not show up. When I try to make a pre-set for this printer it never works and always defaults back to Language Level 3, which gives me a postscript error when I try to print. It prints fine at Language Level 2 but I can't get the setting to stay. Any clues???
    thank you in advance,
    Randy

    Geraldine,
    There are some oddities in Pages' methods.
    What you did was save the changed template which had been altered on the page but you also needed to "capture" and save the Layout or Section over the existing one in the document using the same name to replace it.
    I will walk you through making your own version of a template.
    1 Open a new document using the template you wish to customise.
    2 Don't change anything yet, but open every section from the Sections pull down menu so you have a sequence of pages each with a page of a different section design.
    3 Make Master Objects selectable if they are not. 
Change each Section to your liking.
    4 +Menu > View > Page Thumbnails+
    5 Select first Thumbnail in sidebar 
+Menu > Format > Advanced > Capture Pages… > Name : Type exactly the same name as the section > It will ask you if you want to replace the existing section > Replace+
    6 Repeat this for each section until you have replaced them all.
    7 +Menu > File > Save as Template… > Save with a New Name+
    8 +Menu > File > New from Templates > My Templates > Choose your New Name template+
    You now have a document customised to your design.
    Peter

  • Problem with Signing in itunes with my id. After signing in it does Not Show the Apple id and they are asking 3 Times if i wanna download Songs I have already bought but which are not on this iphone

    Dear community, I'm experiencing a problem since 2 days, that if I sign in in my iTunes account with my Apple ID on my iPhone it doesn't show at the end if scrolling down the ID details and credit anymore. If I try to download songs I bought once but which are not on this device anymore, it asks me 3 times for the ID and password. I fill it in but at the end nothing happens. I see only in the middle a moving symbol.
    What can I do? Apple ID and password are correct . I canceled all settings but same as before.
    Many thanks in advance.

    AJ Green wrote:
    My wifi only iPad 2 has GPS, and a compass/accelaerometer to determine which direction I am facing.  You need to enable location services.
    Your wifi-only iPad does not have GPS. Read the specs for your device.

  • My iphone 4s is recognized by itunes and iphoto, but it will not show as a device in finder for macbook pro

    My iPhone 4s is recognized by itunes and iphoto however it does not show up in finder under devices.

    I don't agree - I have two IMacs and two iPhones - the iPhone 4S show up on one machine, but not the other.  They do show that they are charging, and a memory stick will open on the same USB ports.  So, I don't think this is how they are "supposed to work"......

Maybe you are looking for