Worklist does not mark worked automatically

Dear,
It is for name change workflow worklist issue. After the user submit the name change request, the approver click the link in worklist list. The name change saved successfully but the worklist has not been marked as worked.
The option of the HR_EE_NAME is User specified in Mark Worked When selection.
Anyone has the same issue before?
Thanks in advance!

I use Vista and CS3, Bridge marks my RAW files when changes are made. Check to see if you have different settings in Bridge between the 2 computers. PS is not supported by Vista Basic.

Similar Messages

Bridge does not mark thumbnails with icon after file has been worked.

I use Windows Vista and process photo files in Bridge using the latest Camera Raw plug-in and Photoshop CS2. Bridge does not mark each thumbnail with a icon as it should after processing. I use the same PS program on another computer using Windows XP and Bridge does mark each thumbnail with an icon. Why will Bridge not mark each thumbnail with an icon as stated in the PS manual on my Vista computer?

I use Vista and CS3, Bridge marks my RAW files when changes are made. Check to see if you have different settings in Bridge between the 2 computers. PS is not supported by Vista Basic.

Why is elements better at photomerge than CC- CC does not appear to automatically fill image based on content but elements does when merging a panorama. Also the stitching is visable in CC but almost perfect in elements- why?

I took 6 panorama shots of a scene and used CC to Photomerge them as one. Couldn't see where to automatic blend the edges and there was 'stitch' lines when the images were merged. So i did the same in Elements 11 and it was perfect. Am i doing something wrong in CC or perhaps not doing something at all?
Any help, please?
Dave

Hi - Thanks for taking the time to reply and i appreciate the remarks- if a little harsh- we all have to start somewhere and i am fully aware of the limitations of Elements which is why i decided to add CC to my software. I can only say that if an inferior quality software from Adobe does the job well then CC must also be suited to doing the same which is why i can only think, from your comments, that i have not done something simple- however- following tutorials to get to the end result should have sufficed- it didn't so perhaps i will consider posting the difference between the two applications- and, perhaps suffer a few more 'harsh' comments. The learning curve is quite steep and i am a visual learner, but i'm also not totally incompetent:)
Kind Regards
Dave Munn
Original message----
From : [email protected]
Date : 02/02/2015 - 06:45 (GMTST)
To : [email protected]
Subject : why is elements better at photomerge than CC- CC does not appear to automatically fill image based on content but elements does when merging a panorama. Also the stitching is visable in CC but almost perfect in elements- why?
why is elements better at photomerge than CC- CC does not appear to automatically fill image based on content but elements does when merging a panorama. Also the stitching is visable in CC but almost perfect in elements- why?
created by station_two in Photoshop General Discussion - View the full discussion
First a clarification: you are not addressing Adobe here in these user forums. You are requesting help from volunteers users just like you who give their time free of charge. No one has any obligation to answer your questions.
I'll give it my best shot anyway.
Few folks in this forum are really familiar with Elements, for which there's a dedicated, totally separate forum.
Different engineering teams, also.
From this perspective, it will be difficult to give you a direct answer to your "why?" question.
Personally, I blend very large panorama shots in Photoshop proper since I can't even remember when without any issues whatsoever, up to and including in Photoshop CS6 13.0.6.
Without being at your computer and without looking at your images, I couldn't even begin to speculate what you are doing wrong in Photoshop, which I suspect you are. The least you could show is post examples from your panoramas that have gone wrong.
I can tell you that panorama stitching requires significant overlap between the individual shots, besides common-sdense techniques like a very solid tripod and precision heads.
The only version of Elements I have ever used for any significant time was Elements 6 for Windows, which I bought in 2008 to use on a PC (I've been an avid Mac user for 30 years). I found Elements so limited and so bad that I successfully demanded a refund from Adobe. IU mention this only to emphasize that I can truly only address your question from a Photoshop (proper) and Mac user point of view. I couldn't care less about Elements, but if you have comparison examples of panoramas processed in both applications, by all means post those two.
Generally speaking Photoshop is a professional level application that makes no apologies for its very long and steep learning curve, while Photoshop has many hand-holding features for amateurs and beginners.
Perhaps the bottom line is that you should stick with Elements if you personally manage to get better results there.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7152397#7152397 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7152397#7152397
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

I needed to install a previously purchased CS6 versus on new computer. To do this, I had to download a version from CC. I will not be using CC. How do I activate Photoshop under my license so that it does not stop working when I am out of communication ra

I needed to install a previously purchased CS6 versus on new computer. To do this, I had to download a version from CC. I will not be using CC. How do I activate Photoshop under my license so that it does not stop working when I am out of communication range a month from now?

The CC version will not activate with your perpetual CS6 license. Download the version from here:
http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
Your number should work with this version.

LR4.2 and "Do not import selected duplicates" does not always work.

LR4.2 and "Do not import selected duplicates" does not always work. Running a Mac, 10.6.8, I am cleaning up hard drives, organizing old files. There are times lightroom 4.2 (and before) does not recognize already imported raws and does not gray them out. These are backed up cards and folders of of raw images. Why is the "do not import selected duplicates" check box not working???!!!

There's a known (and old) bug when duplicate identification fails on photos
that have been imported from another catalog.
Sent from phone.

HT204291 Airplay intermittent problem, why does not airplay work well anylonger?

Airplay intermittent problem, why does not airplay work well anylonger. Suddenly it drops out. Now this function has gone from great to ****.
Trying to view streamed content from the ipad to the Apple TV? Nah forget about it. Sooo dissapointing.

Restart your wifi router

Listener (and database instance) does not starts up automatically: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor

Hi at all.... I'm a newbie with database oracle.,
I have the follow problem:
I installed Oracle Database 11g R2 XE on my guest operating system CentOS 6.5.
I have changed the hostname in my SO CentOS (where is installed oracle 11g R2 XE) after installation was completed successfully.
-) Before and during installation the hostname was localhost.
-) After installation I changed the hostname in VMCentOS
From the moment I changed the hostname, nothing starts up automatically. In particular, the listener and the database instance does not starts up automatically.
When I starts up the listener manually and I try to connect to database instance with SQLPLUS i get this error:
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
I think that the problem is due to the changed hostname because I, for testing and debugging purpose, re-installed a new OS CentOS virtual machine, re-installed oracle database 11g and I have not got that problem. The database instance and the listener starts up automatically!
Can any one tell me if maybe the problem is related to the hostname changed? ... and Why?
P.S.: After changed the hostname I have also modified the listener.ora and the tnsnames.ora by modifying the HOST with the correct hostname.

-) Output of command chkconfig (there isn't any line oracle-xe 0:off   1:off 2:on 3:on 4:on 5:on 6:off):
[oracle@VMCentOS /]$ chkconfig
NetworkManager     0:off    1:off    2:on    3:on    4:on    5:on    6:off
abrt-ccpp          0:off    1:off    2:off    3:on    4:off    5:on    6:off
abrtd              0:off    1:off    2:off    3:on    4:off    5:on    6:off
acpid              0:off    1:off    2:on    3:on    4:on    5:on    6:off
atd                0:off    1:off    2:off    3:on    4:on    5:on    6:off
auditd             0:off    1:off    2:on    3:on    4:on    5:on    6:off
blk-availability    0:off    1:on    2:on    3:on    4:on    5:on    6:off
bluetooth          0:off    1:off    2:off    3:on    4:on    5:on    6:off
cpuspeed           0:off    1:on    2:on    3:on    4:on    5:on    6:off
crond              0:off    1:off    2:on    3:on    4:on    5:on    6:off
cups               0:off    1:off    2:on    3:on    4:on    5:on    6:off
dnsmasq            0:off    1:off    2:off    3:off    4:off    5:off    6:off
firstboot          0:off    1:off    2:off    3:on    4:off    5:on    6:off
haldaemon          0:off    1:off    2:off    3:on    4:on    5:on    6:off
htcacheclean       0:off    1:off    2:off    3:off    4:off    5:off    6:off
httpd              0:off    1:off    2:off    3:off    4:off    5:off    6:off
ip6tables          0:off    1:off    2:on    3:on    4:on    5:on    6:off
iptables           0:off    1:off    2:on    3:on    4:on    5:on    6:off
irqbalance         0:off    1:off    2:off    3:on    4:on    5:on    6:off
jexec              0:off    1:on    2:on    3:on    4:on    5:on    6:off
kdump              0:off    1:off    2:off    3:on    4:on    5:on    6:off
lvm2-monitor       0:off    1:on    2:on    3:on    4:on    5:on    6:off
mdmonitor          0:off    1:off    2:on    3:on    4:on    5:on    6:off
messagebus         0:off    1:off    2:on    3:on    4:on    5:on    6:off
netconsole         0:off    1:off    2:off    3:off    4:off    5:off    6:off
netfs              0:off    1:off    2:off    3:on    4:on    5:on    6:off
network            0:off    1:off    2:on    3:on    4:on    5:on    6:off
ntpd               0:off    1:off    2:off    3:off    4:off    5:off    6:off
ntpdate            0:off    1:off    2:off    3:off    4:off    5:off    6:off
portreserve        0:off    1:off    2:on    3:on    4:on    5:on    6:off
postfix            0:off    1:off    2:on    3:on    4:on    5:on    6:off
psacct             0:off    1:off    2:off    3:off    4:off    5:off    6:off
quota_nld          0:off    1:off    2:off    3:off    4:off    5:off    6:off
rdisc              0:off    1:off    2:off    3:off    4:off    5:off    6:off
restorecond        0:off    1:off    2:off    3:off    4:off    5:off    6:off
rngd               0:off    1:off    2:off    3:off    4:off    5:off    6:off
rsyslog            0:off    1:off    2:on    3:on    4:on    5:on    6:off
saslauthd          0:off    1:off    2:off    3:off    4:off    5:off    6:off
smartd             0:off    1:off    2:off    3:off    4:off    5:off    6:off
snmpd              0:off    1:off    2:off    3:off    4:off    5:off    6:off
snmptrapd          0:off    1:off    2:off    3:off    4:off    5:off    6:off
spice-vdagentd     0:off    1:off    2:off    3:off    4:off    5:on    6:off
sshd               0:off    1:off    2:on    3:on    4:on    5:on    6:off
sysstat            0:off    1:on    2:on    3:on    4:on    5:on    6:off
udev-post          0:off    1:on    2:on    3:on    4:on    5:on    6:off
vmware-tools       0:off    1:off    2:on    3:on    4:on    5:on    6:off
vmware-tools-thinprint    0:off    1:off    2:on    3:on    4:on    5:on    6:off
wdaemon            0:off    1:off    2:off    3:off    4:off    5:off    6:off
winbind            0:off    1:off    2:off    3:off    4:off    5:off    6:off
wpa_supplicant     0:off    1:off    2:off    3:off    4:off    5:off    6:off
[oracle@VMCentOS /]$
Moreover in /etc/sysconfig there isn't any file oracle-xe!!!
At this point, I suspect that something in the installation I mistook.

Pocket does not mark as read and move to next item

When I click on the Read Something tab of Pocket on Firefox, it continues to display the same article over and over. It does not mark it as read and move on to the next item on my list.

hello please directly contact the extension developers through the means provided at their homepage - they can likely give you more detailed guidance and are the only ones who can fix bugs or make necessary adjustments in the addon. thank you...

My ipad does not wanna work i bought a new keyboard magnets can it be the problem the magnets, my ipad does not wanna work i bought a new keyboard magnets can it be the problem the magnets

my ipad does not wanna work i bought a new keyboard magnets can it be the problem the magnets, my ipad does not wanna work i bought a new keyboard magnets can it be the problem the magnets. it was still working just before i test the magnet case
i allready try restart and nothing and in try to connect to itunes it does not pick up my ipad what can i do

How are you resetting the device? I presume you're doing something like this?
Press and hold the Sleep/Wake button (on the top of the ipad) and Home button together for at least ten seconds until the Apple logo appears.
What happens after the device resets? Does the Apple logo appear to be replaced by the home screen? Does the iPad respond to any of the buttons or the screen at all?
tt2

My mail system does not load image automatically

my mail system does not load image automatically. how does that happen? what should i do to set the image load configuration?

Although you can configure Mail to load HTML images automatically, you should think twice about doing it. The sender of the message could determine your email address, your IP address, and when you opened his message. Not what you want if you get spam, as most people do.

The Back arrow does not always work, particularly with Amazon and eBay sites.Even the on-page Back arrows do not work either.

I am using version 15.0.1. Since I updated to this version, the Back arrow does NOT always work particularly with Amazon and eBay. This is particularly evident when I go from a list the result of a search to an item on the lis. I cannot get back to the list even using the On-page Back arrow. I usually have to repeat the search to get back to the list again.

Hi MorrellMurphy
probably problem with [http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox Locked or damaged places.sqlite] file
thank you

HT4623 My iPad does not have the automatic software update and I do not know how to download IOS if under settings there is no software update button available. Do I have to reset my iPad and lose data?

My iPad does not have the automatic software update and I do not know how to get IOS 6 onto it. When I go into settings there is no software update button.

If you are really on iOS 5 then look in Settings > General > Software update.
Otherwise:
If you are using iOS 4 (or earlier) there is no Software Update in Settings. That feature was first added in iOS 5.
To update you will have to connect your iPad to iTunes on a computer (preferably the one you sync with and backup to).
See here: http://support.apple.com/kb/HT4972

Ipad does not open iTunes automatically

I have a new iPad 3. Connecting to MBP running Lion. All latest software.
On connecting the iPad it would open iPhoto automatically rather than iTunes. I sorted that out following advice on changing preferences (in iTunes & Iphoto) found here & now it does not open iPhoto automatically. However despite having 'Open iTunes when this iPad is connected' checked in Itunes/devices/preferences iTunes still doesn't open automatically when I connect the iPad to the laptop with a cable.
If I then manually open iTunes, the iPad is recognised & syching begins automatically.
How do I get iTunes to open automatically when I connect my iPad?
Thanks
Ian

This is a common problem. Using a different USB port may resolve the issue.

Diffs subscriber does not turn UP automatically.

Dear All,
This question is regarding ORIB. More precisely concerning the adapters.
As far as I understand after the RETL (POST_BATCH phase, the job retrib) runs, it has to put all the adapters and instances UP.
But it has been noticed that the adapter "diffs" subscriber in RIB-WMS does not turn up automatically and we need to turn it up manually. (While the rest of the adapters e.g. ASNIn, SOStatus subscriber are UP once the job retrib is completed).
Could you please share your expert advice why this is happening?
Many thanks in advance.
Best Regards,
Srinivas

Hi Rafaochoa,
Welcome to Apple Discussions
Please clarify something for me, what exactly are you doing. You take your iBook and just close the lid? Do you shut it down then close the lid?
Jon

Can I not add images to my itunes from Google images or other search engines as when I click get artwork it does not always work

Can I not add images to my itunes from Google images or other search engines as when I click get artwork it does not always work. I used to be able to do this.

The sort fields should generally be empty unless you've putting in custom values to sort solo artists by their surnames. You can apply common changes to thousands of tracks at once, just don't apply the wrong change because there is no undo.
It is a good idea to backup before undertaking large scale changes. See this backup tip for a suggested approach.
tt2
Message was edited by: turingtest2

Worklist does not mark worked automatically

Similar Messages

Maybe you are looking for