Worklist errors after 12.1.3 upgrade

Hi,
I just now upgraded my VISION instance to 12.1.3. Everything went fine, but now when I log in as sysadmin, I see lot of worklist error in the home page. What are they, and How can I get rid of them?
Thanks,

DBA_1976 wrote:
Hi,
as part of the solution in Doc ID 804622.1, I am trying to run the Concurrent request to purge the notifications. But I get the
"FRM-92095: ORacle JInitiator version too low. Please install version 1.1.8.2 or higher." error
But my JInitiator version is 1.3.1.29.
Why am I getting this error?
Thanks,How do you use Jinitiator with 12.1.3 (which is not certified)?
Please uninstall all Jinitiator/JRE from your client, access the application and you will be prompted to download the JRE version which is available on your application server and test the concurrent program then.
Thanks,
Hussein

Similar Messages

HT5167 Error after 10.7.4 upgrade..."computer's local hostname ........is already in use on this network. The name has been changed to...... What to do now to get it back to status before 10.7.4 upgrade?

Error after 10.7.4 Lion Upgrade to iMac
Computer's local host name .......is already in use on this network. the name has been changed to........
and it keeps adding up the number each time I wake the iMac.
What to do to get it back before upgrade error?

Ok worth repeating, hope this works. Finally spoke to AppleCare Support and walked me thru following...restart computer holding down "command" and "option" keys at the same time with letters "P" and "R" when computer turns on. This is what he called a PR restart, clears out discrepancies in memory (if that is what the error message actually is). Then went to Systems Preferences/Network/Sharing and deleted the number that kept increasing every time MAC would wake up.
Even tho this was just done, I am hopeful that error pop-up won't happen again. Fingers crossed!

XML Forms Builder Errors after SP Stack 14 upgrade

Hello,
I upgraded development portal to NW04s SPS14 (from SPS11).
In XML Forms Builder, try to open my existing project but not succedd. I get the message "Operation Timeout".
"The current operation timed out and was aborted. This was caused by network communication problems . Some data may have been lost.try again later"
After click cancel, I get a second message:
"There are no projects stored on the server"
In KM content, etc folder, xmlforms , I can see all my projects !!!
Of course, no network problems exists.. portal is working ok, ...
I applied OSS note 1150307 - "Internal Server Error when accessing XML Forms Builder" but I have the same problem.
Any idea¿?
Thanks and Regards
Noemí Llano

Hello, I did a test...
from the same client machine ...(with JRE 1.6.0_03) I start XML Forms ....
with SPS11 portal, I can see the Projects.
With SPS14 portal, I can not see the projects
Thanks and Regards
Noemí

Process Chain error after Enpk1(7.01) upgrade - "Termination discovered"

Hello We have upgraded our BW from 7.0 to Enhpk1 (7.01) with latest stack.
After our upgrade I'm seeing our Process chain when a step errors out and there is a next step to continue with always link inspite of the error in prev step, but the Process chain does not continue and hangs and when checking the log it gives a prompt of "Termination discovered"
Gives a prompt something like this
"The analysis of chain ZP_MD_OTHER_CUST showed that process
ODSACTIVAT ZP_MD_OTHER_CUST_ACTV was terminated However the
occur) or a metachain Run 4KFMOYW9CGL10CGCQV2ZL691R could
not be ended due to the termination. It may be the case that
a metachain was not informed about the error Continue run
for chain ZP_MD_OTHER_CUST and any corresponding metachain?"
with yes or No prompt
So the chain hangs and does continue only after we enter Yes to the prompt.
We are in Q testing the upgrade this can be big issue when we dont our chain to hang for something that we want to continue always.
Opened a msg with SAP, they got back say its because of note 1398868 in the support pack, asked us to implement the manual update on RSADMIN and apply another note 1473491 - Chain not continued with termination and "ALWAYS" link.
But this has not fixed the issue, Have notified back to them and waiting.
If any of you have encountered this and resolved . pl let me know.
Thanks
Mayil

Since you just upgraded the source SAP system, it's likely that the delta queue doesn't exist for the data and has to be re-initialized. I'd suggest doing an Init w/o Data Transfer and do a Full Repair extraction to catch up on any missed data. From then on, you shouldn't have an issue with your Delta mode extraction from the source system.

I keep getting an error after downloading the Mavericks upgrade

I have a 2011 mac mini running Lion 10.7.5 that I want to upgrade to mavericks. I have not had it very long so I hardly have anything on it. I have downloaded and installed all of the updates and verified that the hdd is ok and downloaded the free Mavericks upgrade then when it finishes the 5.30 gb file download I get an error and a cancel or retry option. Did this 3 times. I would appreciate any help or ideas that anyone can suggest. Thanks

HI, Thanks for asking but although i can use wifi, I made sure that I am using the wired ethernet for the upgrade. It will complete the download but just as soon as it completes the 5.30 gb file that is when I get the error. I think that I have everything covered on the check list as far as preparing it for Mavericks. I have no hardware hooked up to it only usb keyboard and bluetooth mouse. I even unhooked the super drive. After doing some checking I'm not so sure that the upgrade is worth it. I have a program I want to install that says requrements are Mac OSX 10.8 or higher that is why I wanted to do it but the majority or people seem to be having serious issues with Mavericks. I'm starting to think it may not be worth the trouble. Thanks for your reply

RSA3 errors after BW 3.5 upgrade

Dear All,
I would like to get your comments on this and hoping to solve this issue...
The scenario, ALL data loading works in BW 3.1 for all datamarts as infosource.. After upgrading to BW3.5, RSA3 produces an error using the said infosources (datamarts)...
Sample error in RSA3 using a datamart infosource: Errors occured during the extraction..
Has anyone encountered this scenario before?
Thanks to all...
- Arnold -

Hi..
Thanks again...
During loading, the error is: SQL Error: 600
Further analysis:
The error occurred in Extractor .
But for RSA3, the error for the said object: extraction error...
Note: A re-activation has also been done for the said objects (transfer structure)

Youtube Video Format Error after OS 3.0 Upgrade

after i upgraded my iPhone 3G OS 2.2.1 to 3.0, none of the youtube videos are not playing and displaying this error message "This movie format is not supported."
anyone has a clue on what is going on? thanks!
ps. i am using the youtube application that came with the phone.

I'm getting the same message when I try playing a podcast I just downloaded. I've also upgraded my iPhone 3G to OS 3.0 and my iTunes is ver 8.2.1 The podcast is "peasinapodcast's" with Jim Gaffigan. I haven't tried any others yet, but I can see from those reviews some other iPhone users are having the same issue.
Message was edited by: kallidad
Message was edited by: kallidad

Synchronization error after latest Blackberry Storm Upgrade

Hi from North Carolina!
I recently upgraded the OS on my Storm using the Desktop Manager. Since then I get a synchronization error as follows:
"Intellisync
Error encountered. Error code - 0x8004fceb.
Check documentation.
OK"
and it aborts the "processing device calendar".
I downloaded the desktop manager from Blackberry and reinstalled it, but continue to get the same error.
Can anyone help. It is greatly appreciated
Solved!
Go to Solution.

Hi and welcome to the forums!
You have a corrupt record in the calendar:
Thanks,
Bifocals
This issue may be caused by one of the following:
One or more contacts in the Contacts application is missing information or has invalid characters in the First, Last, or Company name fields.
There are attachments in the Calendar application
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB14818&sliceId=SAL_Pub...
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Sender interface SAPCCMS proxy error after PI 7.1 upgrade

Hi,
In PI 7.1 system I have noticed there are some failure in SXMB_MONI on regular interval.
The status of the messages are : System error, restart not possible
Sender namespace: urn:SAPCCMS
Sender interface: SAPCCMS
Type: Synchronus message
Technical outbound channel: Proxy.
We get the error in every envioroment and not part of any of our interfaces. They even arrive after fresh installation.
Does anyone has experianced this irritating phenomenon? Thanks for response.

Hi Mark,
Thanks a lot for your reply.
My specific error is the the one below. It seems that it is not addressed in the SAP Note that you suggested.
ausgeführt. Hierbei wurden keine Anmeldedaten bereitgestellt.
Was können Sie tun ?
Falls Sie noch über keine Benutzerkennung verfügen, so wenden Sie sich an Ihren Systemadministrator.
Fehlercode: ICF-LE-http-c:001-l:-T:-C:6-U:-P:-L:6
HTTP 401 - Unauthorized
Ihr SAP Internet Communication Framework Team
Thanks,
Francis

Errors after 2.2.1 upgrade

Hi All,
We recently upgraded to 2.2.1 from 1.6. We are getting "Page cannot be found" errors in couple of the pages. The same application works fine in 1.6. The errors in the Apache error log are
[Wed Nov 22 01:01:44 2006] [error] [client 130.35.20.122] [ecid: 9313909726114,1] mod_plsql: /pls/qa/wwv_flow.accept HTTP-404 \nwwv_flow.accept: SIGNATURE (parameter names) MISMATCH\nVARIABLES IN FORM NOT IN PROCEDURE: P_T101,P_T102,P_T103,P_T104,P_T105,P_T106,P_T107,P_T108,P_T109\nNON-DEFAULT VARIABLES IN PROCEDURE NOT IN FORM: \n
[Fri Nov 24 03:04:08 2006] [error] [client 130.35.20.122] [ecid: 9451533148708,1] mod_plsql: /pls/qa/f HTTP-404 ORA-20001: Package variable g_security_group_id must be set.\nORA-06512: at "FLOWS_020200.F", line 276\nORA-06512: at line 55\n
We are using Oracle Application Server 10.1.2 as the mid tier, Oracle 10.1.0.3 as the database.
What is the reason for this error? Anybody got this error before?
-Swaroop

We reverted back to 2.0 and installed 2.2.1 again. There was no install log file in the folder we ran the script to upgrade. Does the install log get generated for upgrades??
We got errors when uprading. Here are the errors, does anybody know about this??
select upgrade_action,upgrade_error from WWV_FLOW_UPGRADE_PROGRESS where upgrade_error is not null;UPGRADE_ACTION
UPGRADE_ERROR
flows_files_objects_remove
ORA-02443: Cannot drop constraint - nonexistent constraint
flows_files_objects_create
ORA-02298: cannot validate (FLOWS_FILES.WWV_FLOW_FILE_OBJ_FK) - parent keys not
found
error creating private synonym
ORA-00955: name is already used by an existing object
UPGRADE_ACTION
UPGRADE_ERROR
error on grant
ORA-04042: procedure, function, package, or package body does not exist
error on grant
ORA-04042: procedure, function, package, or package body does not exist
error on grant
ORA-04042: procedure, function, package, or package body does not exist
UPGRADE_ACTION
UPGRADE_ERROR
error on grant
ORA-04042: procedure, function, package, or package body does not exist
error on grant
ORA-04042: procedure, function, package, or package body does not exist
error on grant
ORA-04042: procedure, function, package, or package body does not exist
UPGRADE_ACTION
UPGRADE_ERROR
error on grant
ORA-04042: procedure, function, package, or package body does not exist
error on grant
ORA-04042: procedure, function, package, or package body does not exist
error on grant
ORA-04042: procedure, function, package, or package body does not exist
UPGRADE_ACTION
UPGRADE_ERROR
error on grant
ORA-04042: procedure, function, package, or package body does not exist
flows_files_objects_remove
ORA-02443: Cannot drop constraint - nonexistent constraint
flows_files_objects_create
ORA-02298: cannot validate (FLOWS_FILES.WWV_FLOW_FILE_OBJ_FK) - parent keys not
UPGRADE_ACTION
UPGRADE_ERROR
found
15 rows selected.

App update error after iOS 4.3 upgrade

Since I updated to iOS 4.3 there is a strange corruption on App updater. I can see the updates available but the tab shows them in basic HTML and I can't select them. Have tried reboot to no avail. Any ideas?

A general troubleshooting measure is resetting the iPad. Press and hold the Home and Power buttons for 10+ seconds, ignoring the red power-off slider, until the Apple logo appears.
Save this link for links to solutions to many iPad issues;
http://www.apple.com/support/ipad

After Exchange 2010 SP3 upgrade, UAG publised OWA is throwing a "You do not have permissions to view this folder or page" error

Hi,
We have an issue with our OWA page. We are currently publishing OWA via UAG.
We recently upgraded to Exchange 2010 SP3 and then SP3 Rollup7. Since the upgrade, we are keep getting the following error after entering our credentials on the login page. I've tried with every possible browser.
You do not have permissions to view this folder or page
Strangely enough, the mobile phones are sending and receiving emails just fine, the phones use the same OWA link, so it's not an authentication issue, the phones login into the UAG servers with no issues. I can see this on the Active Sessions screen
on Web Monitor.
I've attempted to connect to the OWA by bypassing the UAG server, so putting in the local OWA address of one of my Exchange servers, it works... so the OWA page is up and running.
No error logs get generated on Web Monitor when we receive the permission error, I think this is because it's past authentication, it's on the Exchange layer.
Any insight would be helpful? I'm assuming something changed on the Exchange side after the upgrade.
Just in case, I've upgraded the UAG and TMG servers to the latest SP and Rollup packets.
UAG > SP4
TMG > SP2 Rollup 5

I've found a solution; UAG requires Basic Authentication over OWA. For some reason Integrated Windows Authentication got turned on after the SP3 upgrade.
http://technet.microsoft.com/en-us/library/ee921443.aspx
Turning Integrated Windows Authentication off via the Client Access OWA settings resolved the issue. Though beware, you
have do this on all your Client Access servers.

Strange Data Mapping Errors after SEM 6 Upgrade. Please assist.

Hi All, I encountered these sudden Mapping errors after I tried to do Testing in Post Upgrade Sand Box. Here I am trying to to perform Collected Reported Financial Data under Data Collection Method for a particular Company Code 3040. Kindly help me with some quick responses as this is kind of high priority. The errors and the Diagnosis Notes I am unable to follow as I do not where I shall write those Mapping Rules they are referring to. I do not even know if that need to apply any SAP Notes as such. Once again Highly appreciate your quick response and Many Thanks in Advance.
Regards, BIP
Input conversion for field Period Value LC has invalid format Message no. UCT8210 Diagnosis The mapping rule for target field Period Value LC contains a move with a selected Input Conversion indicator. Therefore, the system performs an input conversion prior to creating the target data. However, an error in the input conversion occurred while moving the source key figure to the target key figure Period Value LC. This means that the format used for the input conversion is incompatible with the target data. System Response The system will not perform the move. Procedure Examine the mapping rule for field Period Value LC. Either select the Conversion Exit indicator or deselect the Input Conversion indicator. Execute the method again. -
3040 is incompatible with input format for field /1FB/COMPANY Message no. UCT8258 Diagnosis During execution, the method derives the source selection for source field /1FB/COMPANY from the mapping rule for the target field. 3040 is one of the values that were derived for the source selection. The system requires that this value is in the correct SAP-internal format because the Conversion Exit indicator has been selected in the move operator for field /1FB/COMPANY. However, the value 3040 is incompatible with the SAP-internal format. System Response The system attempts to interpret value 3040 as an external format and convert it to the internal format. If this fails, the system is unable to restrict the source selection using source field /1FB/COMPANY. In this case, the system may read more source data than was originally intended, which can affect performance. Procedure In the log, choose the Source button to display the source selections that are used to read the source data. When this appears, examine values selected for field /1FB/COMPANY. If the correct values were selected, you can ignore this message. To prevent this message from being issued, you can select the indicator in the mapping rule used by source field /1FB/COMPANY. If incorrect values were selected, make sure that the mapping rule used by source field /1FB/COMPANY has been defined correctly. If the mapping rule is correct and value (3040) derived for the source selection does not affect the overall result, you can ignore this message. If the source selection does not contain the value 3040 for field /1FB/COMPANY and, because of this, source data that is supposed to be read is not being read, make sure that the mapping rule has been defined correctly. If the source selection does not contain any value for field /1FB/COMPANY, make an estimation as to how much excess source data is being read and whether this might affect system performance. If you do not expect any performance problems, you can ignore this message. In any event, you have the following alternatives if the mapping rule is defined correctly, but the source selection on field /1FB/COMPANY is unsatisfactory: You can define a source selection for field /1FB/COMPANY in the Customizing settings for the method on the Selection tab page. Then the method uses this source selection instead of the source selection derived from inverse interpretation of the mapping rule. You can implement the Business Add-In (BAdI) UC_DATATRANSFER and use the method INVERT to determine the source selection on field /1FB/COMPANY. Then the method uses the result of the INVERT method for the source selection instead of the source selection derived from inverse interpretation of the mapping rule. -
Cannot derive the source selection from target field Version Message no. UCT8252 Diagnosis Field Version has one of the following roles: Consolidation unit Group currency key Fiscal year Posting period Version To delimit the volume of the source data to be read, the system usually derives the source selection from the target selection of such a field. However, the system cannot derive a source selection from field Version. System Response It is possible that a greater volume of source data is being read than is necessary. This can lead to performance issues. Procedure Check whether a mapping rule is defined for field Version. If a mapping rule is defined, you can disregard this warning message. However, if you discover after method execution that the system did not process a large amount of data, and that system performance was not satisfactory, you may want to examine the source selection by choosing the Source button in the log. If the reason for the disregarded data is that too much source data was read because of the unrestricted selection on the source field (which is linked with target field Versionthrough mapping), choose one of the alternatives below: Change the mapping rule for field Version so that the system can derive a delimiting source selection. Implement the Business Add-In (BAdI) UC_DATATRANSFER with the method INVERT to delimit the selection for the source field that is linked via mapping to the target field Version. -
Cannot derive the source selection from target field Group Currency Message no. UCT8252 Diagnosis Field Group Currency has one of the following roles: Consolidation unit Group currency key Fiscal year Posting period Version To delimit the volume of the source data to be read, the system usually derives the source selection from the target selection of such a field. However, the system cannot derive a source selection from field Group Currency. System Response It is possible that a greater volume of source data is being read than is necessary. This can lead to performance issues. Procedure Check whether a mapping rule is defined for field Group Currency. If a mapping rule is defined, you can disregard this warning message. However, if you discover after method execution that the system did not process a large amount of data, and that system performance was not satisfactory, you may want to examine the source selection by choosing the Source button in the log. If the reason for the disregarded data is that too much source data was read because of the unrestricted selection on the source field (which is linked with target field Group Currency through mapping), choose one of the alternatives below: Change the mapping rule for field Group Currency so that the system can derive a delimiting source selection. Implement the Business Add-In (BAdI) UC_DATATRANSFER with the method INVERT to delimit the selection for the source field that is linked via mapping to the target field Group Currency
1 is incompatible with input format for field FISCPERIOD Message no. UCT8258 Diagnosis During execution, the method derives the source selection for source field FISCPERIOD from the mapping rule for the target field. 1 is one of the values that were derived for the source selection. The system requires that this value is in the correct SAP-internal format because the Conversion Exit indicator has been selected in the move operator for field FISCPERIOD. However, the value 1 is incompatible with the SAP-internal format. System Response The system attempts to interpret value 1 as an external format and convert it to the internal format. If this fails, the system is unable to restrict the source selection using source field FISCPERIOD. In this case, the system may read more source data than was originally intended, which can affect performance. Procedure In the log, choose the Source button to display the source selections that are used to read the source data. When this appears, examine values selected for field FISCPERIOD. If the correct values were selected, you can ignore this message. To prevent this message from being issued, you can select the indicator in the mapping rule used by source field FISCPERIOD. If incorrect values were selected, make sure that the mapping rule used by source field FISCPERIOD has been defined correctly. If the mapping rule is correct and value (1) derived for the source selection does not affect the overall result, you can ignore this message. If the source selection does not contain the value 1 for field FISCPERIOD and, because of this, source data that is supposed to be read is not being read, make sure that the mapping rule has been defined correctly. If the source selection does not contain any value for field FISCPERIOD, make an estimation as to how much excess source data is being read and whether this might affect system performance. If you do not expect any performance problems, you can ignore this message. In any event, you have the following alternatives if the mapping rule is defined correctly, but the source selection on field FISCPERIOD is unsatisfactory: You can define a source selection for field FISCPERIOD in the Customizing settings for the method on the Selection tab page. Then the method uses this source selection instead of the source selection derived from inverse interpretation of the mapping rule. You can implement the Business Add-In (BAdI) UC_DATATRANSFER and use the method INVERT to determine the source selection on field FISCPERIOD. Then the method uses the result of the INVERT method for the source selection instead of the source selection derived from inverse interpretation of the mapping rule
Input must be in the format ___,___,__~ Message no. 00088 Diagnosis Your entry does not match the specified input format. System Response The entry in this field was rejected. Procedure The entry must comply with the edit format. The following edit format characters have a special meaning: "_" (underscore) There should be an input character at this point; this should be a number for numeric fields. "." (decimal point) (applies to numeric fields) The decimal point occurs here (setting in the user master record). "," (thousands separator) (applies to numeric fields) This separator occurs (optionally) for more than three figures. Depending on the setting in the user master record, it can be a period or a comma. "V" (applies to numeric fields) The operational sign appears here. If used, it must by at the right margin of the field. The sign is either "-" or " "(space). "~" (tilde) (applies to numeric fields) As of and including this character, leading zeros must also be entered. Otherwise, this character has the same meaning as an underscore. Leading zeros need not be entered on the left of the tilde. They are not output at this position. All other characters have their normal meanings and must be entered in the same position as in the edit format.

Hi Dan,
Could you Kiindly advise me where we need to write the Mapping Rules in Consolidation Monitor? All he time the errors refering to Mapping Rules. The only Tab I seen "Mapping" is in Data Basis But as per my Understanding Iwe do not have much to do there as it is system generated Mapping Tab.
Where we actually go and select/deselct those Input Conversion Indicator/ Conversion exit Indicator.
Highly appreciate your advise.
Thanks and Regards,
BIP

Anyone else have the issue where, after the 8,3 upgrade, you cannot access more than 1 exchange account on your iPhone? This is annoying to me as I need to access 4 daily and cannot due to this error.

Anyone else have the issue where, after the 8,3 upgrade, you cannot access more than 1 exchange account on your iPhone? This is annoying to me as I need to access 4 daily and cannot due to this error.
The first one, my private home email, works fine. With the other 3, I get the message "Cannot get mail: The connection to the server failed"
All were working fine before the 8.3 upgrade. I did try the old trick of making one minor change on the account and resaving, but that did not change anything. I even deleted my work account and re-entered it from scratch, but again, sadly, no luck. For the time being, I am successfully getting the email via IMAP, but this ***** compared to exchange. Anyone have any idea what is happening or if a fix is in the works?

Well, the one set up on exchange 2k3 is now working fine, although no changes were made on either the iPhone or the exchange side, so that's fun, but it still is throwing errors when connecting to the other 2 exchange accounts. The common elements are that both non-functioning exchange accounts are google apps for business accounts. So is one of the ones that's working, by the way. The settings on both accounts are the same as the one that's working, and both worked fine before the 8.3 upgrade. I have no issue accessing both of these accounts on my ipad which is currently on 8.2.x. If it's not the iphone OS at fault, I'm at a loss as to what it could be.

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2. I've erased and reformatted the drive; reconnected Time Machine(it saw it) and began a new backup. The backup starts again but fails before completing with backup drive not found error. I used the 10.7.2 combo update. Any help on how to fix this problem would be appreciated.

Arghhhhhhhhhhhhhhhhhhh!!!!!!
After waiting since October for a fix, I have now upgraded the firmware on the Time Capsule and installed the new Airport Utility, released yesterday, and the situation is even worse.
Up until now, the Airport Utility had an option to disconnect all drives manually and the Time Capsule would then work until the next reboot – a temporary (?) work-around.
Now that option does not exist in the new-look Airport Utility. And the Airport Utility installation can’t be rolled back and the old utility won’t restore.
The sparesbundle is still not accessible. Anyone worked out a work-around in the new environment yet?
I have another Time Machine backup working fine to a trusty old Lacie Drive so erased the one on my Time Capsule to see if that works. I have renamed the Capsule and the Time Capsule Drive. But to build another full backup will take at least two days and I shall be away from tomorrow and am reluctant to leave the Capsule and computer up and running for a week. And I’ll bet the sparsbundle will still be nowhere to be found.
How can Apple screw up so badly when they are to become the richest company in the entire world and – soon – will have more cash in the bank than the entire United States? Can’t they afford someone who really can sort this out? Especially when a Firewire connected hard drive – my trusty and simple LaCie – works fine.
Words, almost, fail me.

Worklist errors after 12.1.3 upgrade

Similar Messages

Maybe you are looking for